JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 75SA-058 SWITCH ASSEMBLY Frequency Range 20-1000 MHz Configuration 1P16T self-terminating solid-state RF switch Enclosure Type 19 inch rack mount @ 1RU high Startup/Default States (configurable) RF switch off at startup (see SWITCH command) DHCP enabled (see NET command) 4 Ethernet users (see NET command) Prompts off (see PROMPT command) Impedance 75 Ohms nominal VSWR 1.6:1 maximum Insertion Loss 2.5dB maximum Isolation 55 dB minimum RF Input Power +20 dBm Switching Speed 50 microseconds (after command is received and processed) (3 milliseconds typical processing time) Remote Control Ethernet (DHCP, TCP/IP, 10/100, up to 12 users) RS-232 (up to 115200 Baud) Remote Commands RF Switch Control Commands: Switch, Set Switch, Read Switch System Commands: Help, Identification, Store, Recall, Pause, Net, Serial, Close, Disconnect, MOTD, Date, Message, Restrict, IDENT, Name, Show Users, Reboot, Uptime, Prompt AC Supply 100-240 VAC @ 47-63 Hz 2 Amp 5x20mm "Slo-Blo" AC fuse Littelfuse #215-002, JFW #025-021 RF Connector F female Operating Temperature Range 0º to +50º C Physical Size See outline drawing 092-6808 ECR/ECN # DATE REV 12/03/2010 24759 Page 1 of 1 12/03/2014 APPR / DATE ECR/ECN # BAC 12/03/2010 A TRS 12/03/2014 JFW FORM E-7-F REV F DATE REV APPR / DATE