Plastic Packages for Integrated Circuits TSOT Package Family MDP0049 e1 D TSOT PACKAGE FAMILY A MILLIMETERS 6 N SYMBOL 4 E1 2 E 3 0.15 C D 2X 1 5 2 (N/2) 0.25 C 2X N/2 TIPS e ddd M B C A-B D b NX 0.15 C A-B 1 3 D 2X TSOT5 TSOT6 TSOT8 TOLERANCE A 1.00 1.00 1.00 Max A1 0.05 0.05 0.05 ±0.05 A2 0.87 0.87 0.87 ±0.03 b 0.38 0.38 0.29 ±0.07 c 0.127 0.127 0.127 +0.07/-0.007 D 2.90 2.90 2.90 Basic E 2.80 2.80 2.80 Basic E1 1.60 1.60 1.60 Basic e 0.95 0.95 0.65 Basic e1 1.90 1.90 1.95 Basic L 0.40 0.40 0.40 ±0.10 L1 0.60 0.60 0.60 Reference ddd 0.20 0.20 0.13 - N 5 6 8 Reference Rev. B 2/07 C A2 SEATING PLANE 1. Plastic or metal protrusions of 0.15mm maximum per side are not included. 2. Plastic interlead protrusions of 0.15mm maximum per side are not included. A1 0.10 C NOTES: NX 3. This dimension is measured at Datum Plane “H”. 4. Dimensioning and tolerancing per ASME Y14.5M-1994. (L1) 5. Index area - Pin #1 I.D. will be located within the indicated zone (TSOT6 AND TSOT8 only). H A GAUGE PLANE c L 1 4° ±4° 6. TSOT5 version has no center lead (shown as a dashed line). 0.25