SAW Bandpass Filter F6222 Features RF bandpass filter High attenuation No matching 50Ω single-ended operation Ceramic Surface Mounted Device (SMD) Package ( 3.8 mm * 3.8 mm ) RoHS Compliant 3.80±0.15 ITF 6222 3 6 1 5 5 2 4 4 3 1.27±0.1 2 1.90±0.1 6 1.50 MAX 3.80±0.15 1 1.00±0.1 1.60±0.1 Package Dimensions Dimensions shown are nominal in millimeters Pin Configuration Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 Input 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range °C -40 25 85 Storage Temperature Range °C -40 25 85 Power Handling Capability dBm - - 10 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6222 Rev. Date 2014-12-17 Rev. NSNH01-AS02 1/7 SAW Bandpass Filter F6222 Specifications Fc = 622.08MHz Minimum Typical Maximum MHz 621.90 622.08 622.26- Bandwidth 3dB Band Width kHz dB 600 800 1200 Insertion Loss( At Fc ) dB - 3.5 6.0 Relative Attenuation At Fc – 4 MHz At Fc + 20 MHz dB 20 20 25 25 - Ohms - 50 - Center Frequency ( Fc ) Input/Output Impedance Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6222 Rev. Date 2014-12-17 Rev. NSNH01-AS02 2/7 SAW Bandpass Filter F6222 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) L1=10nH , L2=22nH L3=18nH , L4=8.2nH Marking Configuration ITF1) 62222) 1) Manufacturer name 2) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6222 Rev. Date 2014-12-17 Rev. NSNH01-AS02 3/7 SAW Bandpass Filter F6222 Typical Performance ( at 25℃ ℃ ) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6222 Rev. Date 2014-12-17 Rev. NSNH01-AS02 4/7 SAW Bandpass Filter F6222 Input / Output VSWR Charts Input / Output Smith Charts I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6222 Rev. Date 2014-12-17 Rev. NSNH01-AS02 5/7 SAW Bandpass Filter F6222 Packing Specification 1. Reeling Quantity : 1000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F6222 Rev. Date 2014-12-17 Rev. NSNH01-AS02 6/7 SAW Bandpass Filter F6222 Carrier Tape Dimensions [unit : mm] A 4.30 ± 0.1 B 4.30 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6222 Rev. Date 2014-12-17 Rev. NSNH01-AS02 7/7