SAW Bandpass Filter F6701 Features RF bandpass filter High attenuation No matching 50Ω single-ended operation Ceramic Surface Mounted Device (SMD) Package RoHS Compliant 3.80± 0.15 ITF 6701 6 1 5 5 2 4 4 3 3 1.27± 0.1 2 1.90± 0.1 6 1.40± 0.15 3.80± 0.15 1 1.00± 0.1 0.64± 0.1 Package Dimensions Dimensions shown are nominal in millimeters Pin Configuration Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 Input 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range °C -40 25 85 Storage Temperature Range °C -40 25 85 Power Handling Capability dBm - - 10 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6701 Rev. Date 2012-10-18 Rev. NSNI05-AS02 1/8 SAW Bandpass Filter F6701 Specifications Fc = 670 MHz Minimum Typical Maximum Unit Center Frequency ( Fc ) - 670 - MHz Insertion Loss (668 ~ 672 MHz) - 2.5 4.0 dB Amplitude Ripple (668 ~ 672 MHz) - 0.5 1.0 dBp-p Absolute Group Delay (Fc) - 100 - nsec Group Delay Variation (668 ~ 672 MHz) - 50 - nsec VSWR (668 ~ 672 MHz) - 1.5 2.0 0.3 ~ 652 MHz 40 50 - 691 ~ 1140 MHz 40 50 - 1140 ~ 1500 MHz 35 40 - 1500 ~ 2500 MHz 30 38 - Relative Attenuation Input/Output Impedance dB 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6701 Rev. Date 2012-10-18 Rev. NSNI05-AS02 2/8 SAW Bandpass Filter F6701 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration ITF1) 67012) 1) Manufacturer name 2) Marking Number I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6701 Rev. Date 2012-10-18 Rev. NSNI05-AS02 3/8 SAW Bandpass Filter F6701 Typical Performance ( at 25℃ ℃ ) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6701 Rev. Date 2012-10-18 Rev. NSNI05-AS02 4/8 SAW Bandpass Filter F6701 Typical Performance ( at 25℃ ℃ ) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6701 Rev. Date 2012-10-18 Rev. NSNI05-AS02 5/8 SAW Bandpass Filter F6701 Input / Output VSWR Charts Input / Output Smith Charts I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6701 Rev. Date 2012-10-18 Rev. NSNI05-AS02 6/8 SAW Bandpass Filter F6701 Packing Specification 1. Reeling Quantity : 1000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~ 15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F6701 Rev. Date 2012-10-18 Rev. NSNI05-AS02 7/8 SAW Bandpass Filter F6701 Carrier Tape Dimensions [unit : mm] A 4.30 ± 0.1 B 4.30 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6701 Rev. Date 2012-10-18 Rev. NSNI05-AS02 8/8