Complimentary Analog Products for the TMS320DM365 Digital Media Processor Best Performance Video Amplifier THS7315 SOIC TPA2013D1 Class-D Amplifier Low Power Voltage Ref Audio Codec’s DSBGA QFN REF50xx SOIC MSOP AIC3107 QFN Low-Power Stereo Video DAC (Decoder) Low Power Touch Screen Controller Low Power Digital Temp Sensor TVP5150 TQFP TSC2008 QFN DSBGA TMP102 SOT • 3 SDTV Video Amplifiers for CVBS, S-Video, Y’U’V etc… • 5.2V/V Gain (14.3dB) • Constant Output Power • 1.8-V to 5.5-V Operation • 2.2-W into an 8-Ω Load from a 3.6-V Supply • Low Temperature Drift (3ppm/°C (max)) • High Accuracy: .05% max • Low Noise (3uVPP/V) • Stereo CODEC with Integrated MONO Class-D Amp • Audio ADC + Audio DAC • Seven Audio Input Pins Best Value OPA361 SC70 TPA2010D1 DSBGA REF33xx SOIC MSOP AIC3104 QFN Low Power • 3V Video Amp with Internal Gain and Filter Rail-to-Rail Output • 2-Pole Reconstruction Filter Low Quiescent Current: 5.3 mA • Integrated Level Shifter Shutdown Current: 1.5uA • Input Range Includes Ground – DC-Coupled Input •2.5-W MONO Filter Free Class-D • Efficiency: 88% at 400mW, 80% at 100mW • Improved CMRR, PSRR TPA2006D1 SON • 1.45-W MONO Class-D • 2.8-mA Quiescent Current • 0.5-uA Shutdown Current • Low Supply Current: 3.9uA (typ) • Low Temperature Drift: 30ppm/°C (max) • High Initial Accuracy: ±0.15% (max) High Output Current: ±5mA • Stereo Audio DAC+ADC • Six Audio Output Drivers • Automatic Gain Control • 14mW Stereo 48-kHz PB • 4.1 mW Stereo 48ksps DAC Playback • 6.1 mW Stereo 48 ksps ADC Record • Low Power Bypass AIC3254 QFN • Ultralow-Power NTSC/PAL Video Decoder Macrovision Copy Protection Detection • Two Composite Inputs or One S-Video Input Ultralow Power Consumption: 113 mw (typical) • VBI Modes Supported Include: Teletext, Wide Screen Signaling, etc… Power-Down Mode: <1 mW • 1.2V to 3.6V, 12-Bit, Nanopower, 4-Wire Micro TOUCH SCREEN CONTROLLER with SPI™ • Effective Throughput Rate: Up to 20kHz (8-Bit) or 10kHz (12-Bit) 1.5 x 2 WCSP-12 and 4 x 4 QFN-16 Packages • Low Power (12-Bit, 8.2kHz Eq Rate): 30.4mA at 1.2V, fSCLK = 5MHz 44.6mA at 2.7V, fSCLK = 10MHz • Low Quiescent Current – 10 uA (MAX) • 10 uA (MAX) shutdown current • Accuracy: 0.5°C (–25°C to +85°C) *Please visit ti.com/processorpower for COMPLETE power solutions 12-bit Resolution Supply Range: 1.4V to 3.6V SPRT512 Complimentary Analog Products for the TMS320DM365 Digital Media Processor Best Performance CDCE913 Clocks Programmable PLL Synthesizer Low Power Wireless 2.4 GHz RF Transceiver Analog Front End 24/16/8-bit I/O Expander TSSOP CC2525 QFN VSP01M01 SOIC MSOP TCA6424 QFN TSB43EA42 Integrated 1394a Phy and Link ESD Protection ±15-kV Array BGA TPD4E001 SOT Best Value Low Power • Programmable 1-PLL VCXO Clock Synthesizer With 1.8-V and 3.3-V Outputs Flexible Clock Driver • In-System Programmability and EEPROM (Serial Programmable Volatile Register and Nonvolatile EEPROM) • Flexible Input Clocking Concept (External Crystal: 8 MHz to 32 MHz) Separate Output Supply Pins • Low-Noise PLL Core (PLL Loop Filter Components Integrated and Low Period Jitter (typical 50 ps) • Wide Supply Range (2.0V – 3.8V) • Low Current Consumption (27 mA in RX, 31 mA in TX @ 0 dBm) • -87 dBm sensitivity (at 2 Mbps) • 10-bit Resolution • SNR 8 5dB @ 18 dB Gain • 2 channel 8-bit DAC VSP2582 • 24-bit I/O Expander • No Glitch on Power Up • 5-V Tolerant I/O Ports TCA6416 QFN TSSOP QFN BGA CC2500 QFN • Low Current Consumption (13.3 mA in RX, 250 kBaud) • Programmable data rate from 1.2 to 500 kBaud • CCD Signal Processing • Programmable Gain Amp (PGA) • 85 mW at 3.0 V and 36 MHz, 1mW in Standby Mode • 16-bit I/O Expander • Internal Power-On Reset • Noise Filter on SCL/SDA Inputs TCA6408 TSSOP QFN BGA • 8-bit I/O Expander • Low Standby Current Consumption of 1 uA • Integrated 400/200/100 Mbps 2-port/3-port PHY 2 x 4K-byte isochronous buffers for video data • Supports bus manager functions and automatic 1394 self-ID verification • DTCP encryption support on IEEE 1394 bus SRAM-like 16-bit asynchronous interface • Support for up to two encrypted/decrypted streams at one time • Two configurable high-speed data ports for video data, one port serial, one serial or parallel •4-Channel ESD Protection • Low 1.5-pF Input Capacitance TPD2E001 DRY DRL QFN *Please visit ti.com/processorpower for COMPLETE power solutions • 2-Channel ESD Protection • Low 1-nA (MAX) Leakage Current • 0.9-V to 5.5-V Supply-Voltage Range • DRY, DRL and QFN PKG SPRT512 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DLP® Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee® Solutions amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2009, Texas Instruments Incorporated