SENSITRON SEMICONDUCTOR SD140UF150A35 TECHNICAL DATA SHEET DATASHEET 4222, Rev- SILICON ULTRA-FAST RECOVERY EPITAXIAL RECTIFIER DIE Applications: • Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode Features: • • • • Glasspassivated Epitaxial Diode with Mesa Structure Soft Reverse Recovery at Low and High Temperature Low Forward Voltage Drop and Low Reverse Current Electrically and Mechanically Stable during and after Packaging Maximum Ratings: Characteristics Peak Inverse Voltage Max. Output Current Symbol VRWM IO Max. Junction Temperature Max. Storage Temperature Reverse Recovery Time TJ Tstg trr Condition 50% duty cycle, rectangular wave form; TA = 25 oC IF=0.5A, IR=1.0A, IRM=0.25A Max. 150 25 Units V A -55 to +175 -55 to +200 35 °C °C nS Max. 0.900 0.975 5.0 1 Units V V µA mA Electrical Characteristics: Characteristics Max. Forward Voltage Drop Max. Reverse Current Symbol VF1 VF2 IR1 IR2 Condition 10A, pulse, TJ = 25 °C 25A, pulse, TJ = 25 °C VR = VRWM , pulse, TJ = 25 °C VR = VRWM , pulse, TJ = 125 °C Mechanical Dimensions: In Inches (mm) Bottom side metalization: Ti/Ni/Ag - 30 kÅ minimum. Top side metalization: Al - 25 kÅ minimum ANODE 0.114 ± 0.003 (2.896 ± 0.076) 0.140 ± 0.003 (3.556 ± 0.076) Bottom side is cathode, top side is anode. Anode 0.010 ± 0.001 (0.254 ± 0.025) Cathode • 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •