RGL34A, RGL34B, RGL34D, RGL34G, RGL34J, RGL34K www.vishay.com Vishay General Semiconductor Surface Mount Glass Passivated Junction Fast Switching Rectifier FEATURES SUPERECTIFIER ® • Superectifier structure for high reliability condition • Ideal for automated placement • Fast switching for high efficiency • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified DO-213AA (GL34) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive, and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 0.5 A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V IFSM 10 A trr 150 ns, 250 ns VF 1.3 V TJ max. 175 °C Package DO-213AA (GL34) Diode variation Single die MECHANICAL DATA Case: DO-213AA, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS- compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER FAST SWITCHING DEVICE: 1st BAND IS RED SYMBOL Polarity color bands (2nd band) RGL34A RGL34B RGL34D RGL34G RGL34J RGL34K Gray Red Orange Yellow Green Blue UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 V Maximum RMS voltage VRMS 35 70 140 280 420 560 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 V Maximum average forward rectified current at TT = 55 °C IF(AV) 0.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 10 A Maximum full load reverse current, full cycle average TA = 55 °C IR(AV) 30 μA TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Revision: 11-Dec-13 Document Number: 88698 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RGL34A, RGL34B, RGL34D, RGL34G, RGL34J, RGL34K www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 0.5 A SYMBOL RGL34A RGL34B RGL34D VF Maximum DC reverse current at rated DC blocking voltage RGL34G RGL34J RGL34K 1.3 TA = 25 °C UNIT V 5.0 IR μA TA = 125 °C 50 Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr Typical junction capacitance 4.0 V, 1 MHz CJ 150 250 ns 4 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum thermal resistance RGL34A RGL34B RGL34D RGL34G RJA (1) 150 RJT (2) 70 RGL34J RGL34K UNIT °C/W Notes (1) Thermal resistance from junction to ambient, 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.036 98 2500 7" diameter plastic tape and reel 13" diameter plastic tape and reel RGL34J-E3/98 RGL34J-E3/83 0.036 83 9000 (1) 0.036 98 2500 7" diameter plastic tape and reel RGL34JHE3/83 (1) 0.036 83 9000 13" diameter plastic tape and reel RGL34JHE3/98 Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 12 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Resistive or Inductive Load Peak Forward Surge Current /A) Average Forward Rectified Current (A) 0.5 0.4 0.3 0.2 0.1 0 10 8 6 4 2 0 0 25 50 75 100 125 150 175 1 10 100 Terminal Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Revision: 11-Dec-13 Document Number: 88698 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RGL34A, RGL34B, RGL34D, RGL34G, RGL34J, RGL34K www.vishay.com Vishay General Semiconductor 10 1 0.1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.01 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 10 Instantaneous Reverse Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction Capacitance (pF) Instantaneous Forward Current (A) 10 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AA (GL34) Solderable Ends Mounting Pad Layout 1st BAND 2nd BAND 0.066 (1.676) 0.060 (1.524) 0.079 (2.0) MIN. D1 = D2 0.079 (2.0) MAX. 0.049 (1.25) MIN. 0.022 (0.559) 0.016 (0.406) D2 = D1 +0 - 0.008 (0.20) 0.177 (4.5) REF. 0.145 (3.683) 0.131 (3.327) 1st band denotes type and polarity 2nd band denotes voltage type Revision: 11-Dec-13 Document Number: 88698 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000