RGL34A thru RGL34M SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIERS DO-213AA / MINI MELF SOLDERABLE ENDS CATHODE BAND D1= 0.066(1.676) 0.060(1.524) D2 0.022(0.559) 0.016(0.406) 0.145(3.683) 0.131(3.327) D2=D1 +0 -0.008(0.20) Dimension in inches (millimeters ) FEATURES MECHANICAL DATA Ldeal for surface mounted applications Easy pick and place Low leakage current Glass passivated chips Metallurgically bonded construction High temperature soldering guaranteed 250oC/10 seconds/.375 , (9.5mm) lead lengths Case Molded plastic use UL94V-0 recoqnized flame retardant epoxy Terminals Plated terminals, solderable per MIL-STD-202, Method208 Polarity Red Color band on body denotes cathode Mounting position Any Weight 0.036gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temp. unless otherwise specified Single phase, half sine wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL RGL 34A RGL 34B RGL 34D RGL 34G RGL 34J RGL 34K RGL 34M UNITS Maximum Current Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current TT=600C I(AV) 0.5 Amps Peak Forward Surge Current Single Sine-Wave on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneous Forward Voltage Drop at 0.5A DC VF 1.3 Volts Maximum DC Reverse Current @TA=250C at Rated DC Blocking Voltage TA=1250C IR 5.0 100 A Maximum Reverse Recovery Time TRR Typical Junction Capacitance CJ 15 Operating Junction Temperature Range TJ -65 to +150 0 -65 to +150 0 Storage Temperature Range 150 TSTG NOTES 1. Reverse Recovery Test Conditions IF=0.5A, I R=1.0A, I RR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C www.paceleader.tw 1 250 500 nS pF C C RGL34A thru RGL34M SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIERS RATING AND CHARACTERISTICS CURVES RGL34A THRU RGL34M FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON - REPETITIVE PEAK FORWARD SURGE CURRENT 50 PEAK FORWARD SURGE CURENT. (A) AVERAGE FORWARD CURRENT (A) 0.7 Single Phase Half Wave 60Hz Resistive or Inouctive Load 0.375"(9.5mm) Lead Length 0.6 0.5 0.5 0.3 0.2 0 25 50 75 100 125 150 40 30 TJ=25oC 20 10 8.3ms Single Half Sine Wave JEDEC Method 0 175 1 o AMBIENT TEMPERATURE ( C) FIG. 3 - TYPICAL JUNCTION CAPACITANCE 6 8 10 20 40 60 80 100 FIG. 4 - TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT.(A) JUNCTION CAPACITANCE.(pF) 4 NUMBER OF CYCLES AT 60Hz 100 TJ=25oC 10 1 2 1 10 1.0 0.1 TJ=25oC Pulse Width=300 s 1% Duty Cycle .01 .4 100 REVERSE VOLTAGE. (V) .6 .8 1.0 1.2 1.4 FORWARD VOLTAGE.(V) FIG. 5 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 NONINDUCTIVE 10 NONINDUCTIVE trr +0.5A ( ) DUT (+) 50Vdc (approx) ( ) PULSE GENERATOR (NOTE 2) 1 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) -0.25A (+) -1.0A NOTES : 1. Rise Time=7ns max. Input Impedance= 1 megohm. 22pF 2. Rise Time=10ns max. Source Impedance= 50 Ohms. www.paceleader.tw 0 1cm 2 SET TIME BASE FOR 5/ 10ns/cm 1.6