Technical Data Foot-switch Foot-switch (1 pedal) Protective guard UN F1 F1 (UN) Standard Switching symbol Contact type U1Z Slow-action contact 1 N.C. 1 N.O. (Zb) SU1Z Snap-action contact 1 N.C. 1 N.O. (Zb) F1 With cover F1 With protective guard 6061100005 1) F1-U1Z 6061600006 1) F1-U1Z UN with BG (see page 3) with BG (see page 3) 6061300011 1) F1-SU1Z 6061800012 1) F1-SU1Z UN with BG (see page 3) with BG (see page 3) 6061200003 2) F1-U2Z 6061700004 2) F1-U2Z UN with BG (see page 3) with BG (see page 3) 6061400061 2) F1-SU2Z 6061900062 2) F1-SU2Z UN with BG (see page 3) with BG (see page 3) U2Z 2 N.C. 2 N.O. (Zb) Slow-action contact SU2Z 2 N.C. 2 N.O. (Zb) Snap-action contact 1) 2) Cable entry size 1 x M20x1,5 Cable entry size 3 x M20x1,5 This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 28.04.2009 / Page 1 of 3 Document : 7100002000_en.doc / Status: 6 / 2114-09 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein.eu Vorlage : 0850174283 Orig. 1 Technical Data Foot-switch Pressure point (D) Switching symbol F1 With cover F1 With protective guard 1 N.C. 1 N.O. (Zb) 6061100009 1) F1-U1ZD 6061600010 1) F1-U1ZD UN 2 N.C. 2 N.O. (Zb) ----- 6061900433 2) F1-SU2ZD UN 6061200007 2) F1-U2ZD 6061700008 2) F1-U2ZD UN with BG (see page 3) with BG (see page 3) F1 With cover F1 With protective guard 6061100001 1) F1-U1Y 6061600002 1) F1-U1Y UN with BG (see page 3) with BG (see page 3) Contact type U1ZD D Slow-action contact SU2ZD D Snap-action contact U2ZD 2 N.C. 2 N.O. (Zb) D Slow-action contact 1) 2) Cable entry size 1 x M20x1,5 Cable entry size 3 x M20x1,5 Latch Contact (Y) Switching symbol Contact type U1Y Switch position 1 1 N.C. 1 N.O. (Zb) Switch position 0 Slow-action contact Switch position 1: normally closed contact: closed, Make contact: open (self-holding contact) Switch position 0: normally closed contact: open, Make contact: closed (self-holding contact) 1) 2) Cable entry size 1 x M20x1,5 Cable entry size 3 x M20x1,5 This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 28.04.2009 / Page 2 of 3 Document : 7100002000_en.doc / Status: 6 / 2114-09 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein.eu Vorlage : 0850174283 Orig. 1 Technical Data Foot-switch General data Electrical data Rated insulation voltage Conv. thermal current Rated operational voltage Utilization category Direct opening action Short-circuit protective device Protection class Mechanical Data Enclosure Cover Protective guard (Accident protection cover UN) Actuator Ambient air temperature Operating force (standard) Mechanical life Switching frequency Assembly Connection Protection ground Conductor cross-sections Weight including cover Weight including protective guard Protection type Standards Ui Ithe Ue 400 VAC 10 A 240 V AC-15, Ue /Ie 240 V / 3 A acc. to IEC/EN 60947-5-1, Annex K (pedal stop) Fuse 10 A gL/gG (slow-action contact) Fuse 2 A gL/gG (snap-action contact) I AL AL AL Foot lever (PA) -30 °C … +80 °C ≈ 10 N (pedal centre) 10 x 106 switching cycles ≤ 50/min 2 x M8 Screw connections (M3,5) 2 x M4 Solid: 0,5 ... 1,5 mm² Litz wire with ferrules: 0,5 ... 1,5 mm² ≈ 0,6 kg ≈ 1,5 kg IP65 acc. to IEC/EN 60529 VDE 0660 T100, DIN EN 60947-1, IEC 60947-1 VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1 EU Conformity Approvals BG CCSAUS A300, Q300 (same polarity) Notes Tapped holes not in use must be closed with blind plugs. The degree of protection (IP code) specified applies only to a properly closed cover and in connection with the appropriate cable glands or blind plugs. This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 28.04.2009 / Page 3 of 3 Document : 7100002000_en.doc / Status: 6 / 2114-09 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein.eu Vorlage : 0850174283 Orig. 1