Technical Data Plastic bodied limit switch Series C2 Description Article number C2-SU1Z ST 6008354026 Operating symbol Operating diagram On Off Tolerance: Operating point ± 0,25 mm; Actuating force: ± 10 % Electrical data Rated insulation voltage Conv. thermal current Rated operational voltage Utilization category Direct opening action Short-circuit protective device Protection class Ui Ithe Ue 250 V AC 10 A 240 V AC-15, Ue /Ie 240 V / 3 A acc. to IEC/EN 60947-5-1, Annex K Fuse 6 A gL/gG II, totally insulated This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 14.01.2008 / Page 1 of 2 Document : 6008354026_en / Last update : 2 / 2016-08 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein-ag.de Vorlage : 0850174281 Orig. 1 Technical Data Plastic bodied limit switch Mechanical data Enclosure Cover Actuator Ambient air temperature Contact type Mechanical life Switching frequency Assembly Connection Conductor cross-sections Cable entrance Weight Installation position Protection type PBT PC Adjusting screw adjustable, thread M3 with a lock nut -30 °C … +80 °C 1 NC, 1 NO (Zb) 3 x 106 switching cycles ≤ 100/min 2 x M3 4 screw connections (M3,5) Solid: 0,5 ... 1,5 mm² Litz wire with ferrules: 0,5 ... 1,5 mm² Rectangle 8,5 x 3,5 mm ≈ 0,02 kg operator definable IP30 acc. to EN 60529; DIN VDE 0470 T1 Actuation The push bolt actuator is mainly intended to be actuated along its axis. Side actuation will considerably reduce switch life. The switch may not be used as a mechanical stop. Standards VDE 0660 T100, DIN EN 60947-1, IEC 60947-1 VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1 EU Conformity Approvals CCSAUS A300, Q300 (same polarity) Notes The degree of protection (IP code) specified above applies solely when the cover is closed properly. This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 14.01.2008 / Page 2 of 2 Document : 6008354026_en / Last update : 2 / 2016-08 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein-ag.de Vorlage : 0850174281 Orig. 1