6008357020en

Technical Data
Plastic bodied limit switch
Series C2
Description
Article number
C2-SU1Z K
6008357020
Operating symbol
Operating diagram
On
Off
Tolerance:
Operating point ± 0,25 mm;
Actuating force: ± 10 %
Electrical data
Rated insulation voltage
Conv. thermal current
Rated operational voltage
Utilization category
Direct opening action
Short-circuit protective device
Protection class
Ui
Ithe
Ue
250 V AC
10 A
240 V
AC-15, Ue /Ie 240 V / 3 A
acc. to IEC/EN 60947-5-1, Annex K
Fuse 6 A gL/gG
II, totally insulated
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!
Date of issue: 14.01.2008 / Page 1 of 2
Document : 6008357020_en / Last update: 1 / 2016-08
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein-ag.de
Vorlage : 0850174281 Orig. 1
Technical Data
Plastic bodied limit switch
Mechanical data
Enclosure
Cover
Actuator
Ambient air temperature
Contact type
Mechanical life
Switching frequency
Assembly
Connection
Conductor cross-sections
Cable entrance
Weight
Installation position
Protection type
PBT
PC
Button (thermoplastic)
-30 °C … +80 °C
1 NC, 1 NO (Zb)
3 x 106 switching cycles
≤ 100/min
2 x M3
4 screw connections (M3,5)
Solid: 0,5 ... 1,5 mm²
Litz wire with ferrules: 0,5 ... 1,5 mm²
Rectangle 8,5 x 3,5 mm
≈ 0,02 kg
operator definable
IP30 acc. to EN 60529; DIN VDE 0470 T1
Actuation
The push bolt actuator is mainly intended to be actuated along its axis.
Side actuation will considerably reduce switch life.
The switch may not be used as a mechanical stop.
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EU Conformity
Approvals
CCSAUS
A300, Q300 (same polarity)
Notes
The degree of protection (IP code) specified above applies solely when the cover is closed properly.
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!
Date of issue: 14.01.2008 / Page 2 of 2
Document : 6008357020_en / Last update: 1 / 2016-08
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein-ag.de
Vorlage : 0850174281 Orig. 1