DF1502S THRU DF1510S SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 200 to 1000 Volts Forward Current - 1.5 Amperes DFS 0.037(0.95) 0.323(8.20) 0.315(8.00) 0.102(2.60) 0.087(2.20) 0.394(10.00) 0.406(10.30) 0.014(0.35) 0.047(1.20) * Glass passivated chip junctions * Low Forward Voltage Drop, High Current Capability * High Surge Current Capability * Designed for Surface Mount Application 0.008(0.20) .031(0.8) .024(0.6) 0.307(7.80) 0.335(8.50) 0.244(6.2) 0.268(6.5) FEATURES * Plastic Material-UL Recognition Flammability 4 1 3 2 Classification 94V-0 0.063(1.60) 0.055(1.40) 0.204(5.20) 0.197(5.00) MECHANICAL DATA Case : Molded Plastic Terminals : Tin Plated, solderable per MIL-STD-750, Method 2026 Polarity : As marked on Case Weight : 0.38 gram *Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature SYMBOLS DF1502S DF1504S DF1506S DF1508S DF1510S UNITS Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 140 280 420 560 700 Volts VDC 200 400 600 800 1000 Volts unless otherwise specified. Maximum DC blocking voltage o Maximum average forward rectified current @ TA=40 C Peak forward surge current 8.3ms single half sine-wave I (AV) 1.5 Amps IFSM 50 Amps VF 1.1 Volts superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @ IF=1.5 A o Maximum DC reverse current @TC=25 C at rated DC blocking voltage @TC=125 C Typical junction capacitance per element (NOTE 1) Typical thermal resistance, junction to ambient (NOTE 2) Operating junction and storage temperature range 5 IR o CJ R pF 25 40 JA TJ,TSTG uA 500 -55 to +150 o C/W o C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. (2) Thermal resistance from junction to ambient measured on P.C.B. with 5.0*0.5" (13*13mm) copper pads. REV. 1 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES DF1502S THRU DF1510S FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.0 1.5 1.0 0.5 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 50 40 30 20 10 0 0 0 50 100 1 150 10 o 100 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE, C 60 Hz Resistive or Inductive load FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 10.00 1.00 0.10 o TJ=125 C 10.0 1.0 o TJ=25 C 0.10 o TJ=25 C PULSE WIDTH=300uS 0.01 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 o JUNCTION CAPACITANCE, pF TJ=25 C 10 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. 1 Zowie Technology Corporation