Product specification DF15005S - DF1510S DF-S ■ Features 0.205 (5.2) 0.195 (5.0) 0.047 (1.20) 0.040 (1.02) ● Glass passivated chip junctions ● Low Forward Voltage Drop, High Current Capability ● Surge Overload Rating to 50A Peak 0.404 (10.3) 0.386 (9.80) 0.335 (8.51) 0.320 (8.13) 45o 0.255 (6.5) 0.245 (6.2) 0.013 (0.330) 0.130 (3.3) 0.009 (0.241) 0.120 (3.05) 0.060 (1.524) 0.040 (1.016) 0.013 (0.330) 0.003 (0.076) Dimensions in inches and (millimeters) ■ Absolute Maximum Ratings Ta = 25℃ Parameter Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Current 50 100 200 VRMS 35 70 140 TA=@ 40℃ Non-Repetitive Peak Forward Surge Current, 8.3 ms Single half-sine-wave Superimposed on Rated Load (JEDECmethod) Forward Voltage (per element) @ IF = 1.5A Reverse Current(per element) @ Rated VR , TA = 25℃ TA = 125℃ Rating for fusing (t < 8.3ms) 400 600 800 1000 280 420 560 700 V V IO 1.5 A IFSM 50 A VF 1.1 V IR 10 500 μA 2 It 10 A2s CJ 25 pF RθJA 40 ℃/W Tj, Tstg -55 to +150 ℃ Typical Total Capacitance (per element) (Note 1) Typical Thermal Resistance, Junction to Ambient (Note 2) Operating and Storage Temperature Range DF15005S DF1501S DF1502S DF1504S DF1506S DF1508S DF1510S Unit VRMM VRWM VDC Notes: 1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0V DC. 2.Device mounted on PCB with 0.5 × 0.5” (13 × 13mm). http://www.twtysemi.com [email protected] 4008-318-123 1 of 2 Product specification DF15005S - DF1510S IO, AVERAGE FORWARD CURRENT (A) 2.0 IF, INSTANTANEOUS FORWARD CURRENT (A) Typical Characteristics 60 Hz Resistive or Inductive load 1.5 1.0 0.5 0 40 60 100 80 120 140 10 Tj = 25°C Pulse Width = 300µs 2% duty cycle 1.0 0.1 0.01 0.4 0.8 1.0 1.4 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typ Forward Characteristics (per element) TA, AMBIENT TEMPERATURE (°C) Fig. 1 Output Current Derating Curve 60 100 Tj = 25°c f = 1.0 Mhz Vsig = 50 mV p-p Single half-sine-Wave (JEDEC Method) 50 CJ, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.6 40 30 20 10 10 0 1 1 10 100 1 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typ Junction Capacitance (per element) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current IR, INSTANTANEOUS REVERSE CURRENT (µA) 10 100 Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typ Reverse Characteristics (per element) http://www.twtysemi.com [email protected] 4008-318-123 2 of 2