4 3 2 NOTES: 1. MOUNT MALE COUPLER TO FLANGE WITH SCREWS PROJECTING FOR ALIGNMENT. FLANGE MUST BE TAPPED. 2. MOUNT RETAINER RING TO FEMALE COUPLER, SNAP FIT. 3. CUT NYLON SCREWS TO LENGTH SO AS NOT TO A PROTRUDE THROUGH MATING FLANGE. REV A COMBINED FLANGE THICKNESS MIN: .50 MAX: .75 AUTH BF DATE 7-2-12 1 REVISION HISTORY DESCRIPTION INITIAL RELEASE .250 1.562 .913 4. MATE FLANGES AND SCREW TIGHT. n 6.000 B B WR284 WG WR284 WG MALE COUPLER FEMALE COUPLER 2.01 MAX ASSEMBLED 1.76 MIN RETAINING RING A SECTION A-A SCALE .500 KNURLED SURFACE A A MODEL NO SHOWN WITH WR284 CPRF FLANGE PER UG1725/U MAY ALSO BE USED WITH UG584/U UG1349/U QTY NEXT ASSY THIRD ANGLE PROJECTION: APPROVALS UNLESS OTHERWISE NOTED, DIMENSIONS ARE IN INCHES, TOLERANCES ARE: FRACTIONS: ±1/64 ±.005 MACHINED FINISH 63 OR BETTER 4 3 2 BF www.atmmicrowave.com 7-2-12 CHKD. APRVD. MATERIAL WR284 QUICK DISCONNECT 6061-AL ALY SIZE B TREATMENT FINISH THE INFORMATION IN THIS DRAWING IS PROPRIETARY AND SHALL NOT BE USED OR DISCLOSED WITHOUT THE PRIOR WRITTEN CONSENT OF ATM, INC. DO NOT SCALE DWG. OUTLINE, ANGLES: ±1/2° DECIMALS 2 PLACE 3 PLACE ±.01 DRAWN ADVANCED TECHNICAL MATERIALS, INC. TEL: (631) 289-0363 FAX: (631) 289-0358 DATE BLOACK ANODIZE MODEL # CAGE CODE 14172 ATM DWG # 0R8N4 QD-284 REVISION SHEET 1 A 1 of 1