4 3 NOTES: 1. MOUNT MALE COUPLER TO FLANGE WITH SCREWS PROJECTING FOR ALIGNMENT. FLANGE MUST BE TAPPED. 2 REV A B COMBINED FLANGE THICKNESS MIN: .500 MAX: .750 2. MOUNT RETAINER RING TO FEMALE COUPLER, SNAP FIT. 3. CUT NYLON SCREWS TO LENGTH SO AS NOT TO PROTRUDE THROUGH MATING FLANGE. 4. MATE FLANGES AND SCREW TIGHT. B 1 REVISION HISTORY AUTH DATE DESCRIPTION BF 10-4-12 INITIAL RELEASE BF 10-12-12 CORRECT CALLOUT FROM 75 TO 159 .125 B 4.50 WR159 WG FEMALE COUPLER MALE COUPLER KNURLED SURFACE .613 1.166 RETAINING RING 1.62 MAX ASSEMBLED 1.37 MIN A A B SHOWN WITH WR159 CPRG FLANGE MODEL NO QTY NEXT ASSY THIRD ANGLE PROJECTION: APPROVALS UNLESS OTHERWISE NOTED, DIMENSIONS ARE IN INCHES, TOLERANCES ARE: FRACTIONS: ±1/64 THREADED FLANGE ±.005 MACHINED FINISH 63 OR BETTER 4 3 2 BF www.atmmicrowave.com 10-4-12 CHKD. APRVD. MATERIAL WR159 QUICK DISCONNECT 6061-T6 AL ALY SIZE B TREATMENT FINISH THE INFORMATION IN THIS DRAWING IS PROPRIETARY AND SHALL NOT BE USED OR DISCLOSED WITHOUT THE PRIOR WRITTEN CONSENT OF ATM, INC. DO NOT SCALE DWG. OUTLINE, ANGLES: ±1/2° DECIMALS 2 PLACE 3 PLACE ±.01 DRAWN ADVANCED TECHNICAL MATERIALS, INC. TEL: (631) 289-0363 FAX: (631) 289-0358 DATE BLACK ANODIZE MODEL # CAGE CODE 14367 ATM DWG # 0R8N4 QD/159 REVISION SHEET 1 B 1 OF 1