4 3 D 2 REV A B C D MOUNT MALE SECTION TO FLANGE, USING SUPPLIED HARDWARE. SEE NOTES 1, 2, 3. 1 REVISION HISTORY AUTH DATE DESCRIPTION 10/15/2007 INITIAL RELEASE 08/19/14 ADDED MODEL WR34 REFERENCES. LM 11/7/2014 LAYOUT UPDATE, NO CHANGES TO PARTS RL 10/28/15 ADDED MOUNTING NOTE, DIAMETER DIMENSION, FLANGE DIMENSION M.R. D B B (0.375) Ø 2.30 TYPICAL D 1.01 MIN. SIZE, WITH 0.190 COMBINED FLANGE THICKNESS ISO VIEW MIN FLG THK SEE NOTE 1 SEE NOTE 2 DETAIL A 1.20 MAX. SIZE, WITH 0.375 COMBINED FLANGE THICKNESS A A A SEE NOTE 3 MAX FLG THK NOTES: 1. WAVEGUIDE AND FLANGES ARE SUPPLIED BY CUSTOMER; DEPICTION HEREIN IS FOR ILLUSTRATION ONLY. 2. TAPPED HOLE FLANGE. COVER FLANGE WITH TAPPED HOLES, COVER-GROOVE FLANGE WITH TAPPED HOLES, OR CHOKE-STYLE FLANGE ARE COMMON EXAMPLES. USED ON QTY NEXT ASSY THIRD ANGLE PROJECTION: UNLESS OTHERWISE NOTED, DIMENSIONS ARE IN INCHES, TOLERANCES ARE: FRACTIONS: ±1/64 3 ±.01 ±.005 MACHINED FINISH 63 OR BETTER 2 DRAWN RL ADVANCED TECHNICAL MATERIALS, INC. TEL: (631) 289-0363 FAX: (631) 289-0358 DATE 11/7/2014 www.atmmicrowave.com CHKD. APRVD. WR42, HIGH TORQUE MATERIAL SIZE TREATMENT FINISH THE INFORMATION IN THIS DRAWING IS PROPRIETARY AND SHALL NOT BE USED OR DISCLOSED WITHOUT THE PRIOR WRITTEN CONSENT OF ATM, INC. DO NOT SCALE DWG. OUTLINE, QUICK CONNECT ANGLES: ±1/2° DECIMALS 2 PLACE 3 PLACE 3. CUT NYLON SCREWS TO LENGTH. PROTRUSION OF NYLON SCREW PAST FLANGE FACE MUST BE NO GREATER THAN THICKNESS OF THE MATING FLANGE. 4 APPROVALS B MODEL # CAGE CODE 16359 ATM DWG # 0R8N4 QD-42HQ REVISION SHEET 1 D 1 OF 1