HS-324-04-0300 HS-324-04-0300 Latching 2 - Wire Flatpack Hall Effect Sensor Product image serves as example only. Block Diagram Features › Compact size › Various switching sensivity › Various switching points avaible › Customized types avaible Approvals Absolute Maximum Ratings Symbol Parameter VSUP Supply voltage wire colour Min. red Max. Unit Conditions V t < 1000 h 1) 28 V t < 96 h 1) - 32 V t < 5 min 1) - 40 V t < 5 x 400 ms 1) - 18 - with series resistor RV> 100 Ohm VOUT Output voltage V t < 1000 h 1) - 28 V t < 96 h 1) - 32 V t < 5 min 1) - 40 V t < 5 x 400 ms 1) red - 65 mA red - 50 red - 0.5 with series resistor RV > 100 Ohm Output current IO IOR Reverse output current 1) No cumulative stress mA All voltages listed are referenced to ground (GND) Dimensions Wire Assignment Name * VSUP Function Cable colour Supply voltage and output GND red Ground black HS-324 -04-0300 wire length [mm] * other positions on request Material Information Material Environmental Characteristics Operating temperature Page 1 of 3 Rev. 1.3, 11.02.2016, (006, 009, 008) hs324_04_0300_ds_e_1.3 °C - 20 to + 85 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Colour Housing ABS black Cable UL1007/1569, AWG 24 red, black Potting compound Epoxy black Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] pic-gmbh.com HS-324-04-0300 HS-324-04-0300 Latching 2 - Wire Flatpack Hall Effect Sensor Characteristics At recommended operation conditions if not otherwise specified in the column "Conditions". Typical characteristics for TJ = 25 °C and VSUP = 12 V Symbol Parameter wire colour Min. red red red 5 12 Typ. Max. Unit Conditions Supply ISUPIo ISUPIo ISUPhi Low supply current High supply current Reverse current 7 17 1 mA mA mA 1 1 µs µs µs µs µs for VSUP = - 18 V Output tf tf td tsamp ten Output fall time1) Output rise time Delay time 1) Output refresh period Enable time of output after settling of VSUP 16 2 50 1.6 2.66 1) VSUP = 12 V; VSUP = 12 V B > Bon + 2 mT or B < Boff - 2 mT Power-on-self-test Self test can be triggered externally; details on request 1) Guaranteed by design Recommended Operating Conditions Symbol Parameter VSUP Supply voltage wire colour red Min. Max. Unit 3.0 24 V Conditions Magnetic Characteristics Overview Symbol Parameter wire colour BONth ON threshold range BOOth OFF threshold range Bth Adjustable step size 2) - TC Temperatur compensation of - 1) 1) Min. Typ. Max. Unit - - 30 30 mT - - 30 30 mT 0.5 0 Conditions mT - 3000 ppm/K magnetic thresholds 3) 1) Avaible range 2) Small steps at small values, bigger steps at higher values. May not be undercut 3) Different temperature compensation avaible on request Page 2 of 3 Rev. 1.3, 11.02.2016, (006, 009, 008) hs324_04_0300_ds_e_1.3 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] pic-gmbh.com HS-324-04-0300 HS-324-04-0300 Latching 2 - Wire Flatpack Hall Effect Sensor Magnetic Characteristics Switching Type Temp. koeff. of magnetic thresh. Hysteresis BHYS 1) Off point BOFF TC [ppm/K] Min. [mT] Typ. Max. Min. 0 tbd. 12.0 tbd. tbd. - 12.0 tbd. A B C D E F latching 1) On point BON [mT] Typ. Max. Min. [mT] Typ. Max. - 24.0 - The hysteresis is the difference between the switching points BHYS = BON - BOFF Magnetic Approach (for example) A F E B C D Current consumtion Vout ON turning * OFF t * Sensor center point Page 3 of 3 Rev. 1.3, 11.02.2016, (006, 009, 008) hs324_04_0300_ds_e_1.3 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] pic-gmbh.com