Model HS324 Crystal - Industrial Electronics FEATURES • • • • • • • Standard 3.2mm x 2.5mm Seam Weld Package Fundamental Design Frequency Range 12 – 40 MHz Fundamental, 36 – 120 MHz 3rd Overtone Frequency Tolerance; ±10 ppm, ±15 ppm, ±20 ppm, ±30 ppm and ± 50 ppm Frequency Stability, reference Ordering Information Operating Temperature, -40°C to +105°C standard Tape & Reel Packaging Standard, EIA-481 APPLICATIONS Model HS324 is a low cost crystal developed for use in industrial applications requiring extended temperature ranges. ORDERING INFORMATION HS324 PACKAGING OPTIONS T - 1k pcs./reel R - 3k pcs./reel FREQUENCY Product Frequency Code [Refer to document 016-1454-0.] LOAD CAPACITANCE A = 10 pF G = 30 pF B = 13 pF H = 32 pF C = 16 pF J = 9 pF D = 18 pF K = 8 pF E = 20 pF L = 12 pF F = 24 pF S = Series MODE OF OSCILLATION F = Fundamental T = 3rd Overtone FREQUENCY TOLERANCE @ 25°C 1 = ± 10 ppm 3 = ± 30 ppm X = ± 15 ppm 5 = ± 50 ppm 2 = ± 20 ppm TEMPERATURE RANGE OPTIONS I = -40°C to +85°C G = -40°C to +105°C [Stability Code 5 & 6] H = -40°C to +125°C [Stability Code 6] STABILITY TOLERANCE Over Operating Temperature Range (Referenced to 25°C Reading) X = ± 15 ppm 2 = ± 20 ppm 3 = ± 30 ppm 5 = ± 50 ppm 6 = ± 100 ppm Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. PACKAGING INFORMATION [Reference] Device quantity is 1k pcs. minimum and 3k pcs. maximum per 180mm reel. 17.5 2.0 Ø13.5 120° Ø60 Ø180 Ø21.4 Document No. 008-0488-0 Page 1- 2 www.ctscorp.com Rev. A Model HS324 Seam Seal Crystal ELECTRICAL CHARACTERISTICS VALUE PARAMETER Operating Mode Frequency Range Crystal Cut Frequency Tolerance @ 25°C ELECTRICAL PARAMETERS Frequency Stability Tolerance AT-Cut ±10ppm, ±15ppm, ±20ppm, ±30ppm, ±50ppm 1 ±15 ppm, ±20 ppm, ±30 ppm, ±50 ppm, ±100 ppm [Operating Temperature Range, Referenced to 25°C Reading] Operating Temperature Range 3rd Overtone 36.0 MHz to 120.0 MHz Fundamental 12.0 MHz to 40.0 MHz -40°C to +85°C [All Stability Codes] -40°C to +105°C [Stability Code 3, 5, 6] -40°C to +125°C [Stability Code 5, 6] 1 12.000 16.000 19.000 30.000 Equivalent Series Resistance MHz MHz MHz MHz - 15.999 18.999 29.999 40.000 MHz MHz MHz MHz 100 Ohms maximum 80 Ohms maximum 60 Ohms maximum 40 Ohms maximum Load Capacitance or Resonance Mode 36.000 MHz - 53.999 MHz 54.000 MHz - 120.000 MHz 150 Ohms maximum 100 Ohms maximum 10pF, 12pF, 16pF, Series standard [See Ordering Information for More Options] Shunt Capacitance (C0) Drive Level Aging @ +25°C Insulation Resistance [@ DC 100V] Storage Temperature Range Reflow Condition, per JEDEC J-STD-020 3.0 pF typical, 5.0 pF maximum 10 µW typical, 100 µW maximum ±5 ppm/yr maximum 500M Ohms minimum -40°C to +125°C +260°C maximum, 10 Seconds maximum 1 See Ordering Information. MECHANICAL SPECIFICATIONS MARKING INFORMATION 1. HS324 - CTS Model Series. 2. C – CTS. 3. D – Date code. See Table I for codes. 4. XXX – Frequency code. PACKAGE DRAWING HS324 CDXXX [Reference CTS document 016-1450-0, Frequency Code Tables.] NOTES 1. Complete CTS part number, frequency value, date code and manufacturing site code information must appear on reel and carton labels. 2. Termination pads (e4); barrier plating is nickel [Ni] with gold [Au] flash plate. 3. Reflow conditions per JEDEC J-STD-020; 260°C maximum, 10 seconds. SUGGESTED SOLDER PAD GEOMETRY TABLE I – DATE CODE MONTH JAN YEAR FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC M 2001 2005 2009 2013 2017 A B C D E F G H J K L 2002 2006 2010 2014 2018 N P Q R S T U V W X Y Z 2003 2007 2011 2015 2019 a b c d e f g h j k l m 2004 2008 2012 2016 2020 n p q r s t u v w x y z Document No. 008-0488-0 Page 2 - 2 Rev. A