InGaAs PIN photodiodes with preamp G9821 series Receptacle type, 1.3/1.55 μm, 2.5 Gbps The G9821 series is a family of high-speed receivers specifically developed for 1.3/1.55 μm band optical fiber communications. These devices incorporate a high-speed, high-sensitivity InGaAs PIN photodiode and a high-speed preamp integrated in a receptacle module. Packages are available with various connectors and mounting styles. Features Applications High-speed response Optical fiber communications High gain with AGC (auto gain control) Fiber channel Low power supply voltage: 3.3 V Gigabit Ethernet Differential output SDH/SONET (STM-16/OC-48) Sensitivity: -25.5 to +1 dBm Absolute maximum ratings Parameter Supply voltage Operation temperature Storage temperature Symbol Vcc Topr Tstg Condition Value -0.5, +5.0 -40 to +85 -40 to +85 No dew condensation*1 No dew condensation*1 Unit V °C °C *1: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical and optical characteristics (Ta=25 °C, Vcc=3.3 V, Vee=0 V, RL=50 Ω*2, λ=1.31 μm, unless otherwise noted) Parameter Photosensitivity Supply current Output bias voltage Cutoff frequency Low cutoff frequency Noise equivalent power Symbol S Icc Vo fc fc-L NEP Minimum receivable sensitivity Pmin Maximum receivable sensitivity Pmax Condition Pin=-22 dBm *2 *3 *4 Dark state, RL=∞ Dark state, RL=∞ Pin=-22 dBm, -3 dB *3 Pin=-22 dBm, -3 dB Dark state, to 1875 MHz *3 *4 2.5 Gbps, PRBS=223-1 BER=10-10 Extinction ratio=10 dB Output impedance Optical return loss Rout ORL 1.31/1.55 μm Min. 1.0 1.7 - Typ. 1.5 45 3.0 2.1 3.0 310 Max. 60 500 - -25.5 -23.5 +1 - - 40 12 50 14 60 - Unit V/mW mA V GHz kHz nW rms dBm Ω dB *2: Using a single mode optical fiber with a master plug *3: Output: capacitive coupling *4: Single-ended (Vout+) measurement The G9821 series may be damaged by electrostatic discharge, etc. Be careful when using the G9821 series. www.hamamatsu.com 1 InGaAs PIN photodiodes with preamp G9821 series Package lineup Parameter Mounting style Connector Dimensional outline G9821-22 Board FC (1) G9821-32 Panel FC (2) Dimensional outlines (unit: mm) (1) G9821-22 SECTION A/A ( 2.5) (4) (5.2) 2-56 UNC 2B 2 PLCS (depth: 4) ( 2.54) (11) M8 × 0.75 P A 0.45 ± 0.1 Lead 9.5 ± 0.1 12.8 ± 0.1 A 6.1 ± 0.1 9.2 ± 0.1 JIS C5970 FC receptacle* 1.75 ± 0.1 (3.5) 11.55 ± 0.1 15.05 ± 0.3 Tolerance unless otherwise noted: ±0.2 *This is compatible with FC/PC, FC/SPC, and FC/UPC optical plugs. It is not compatible with FC/Angled PC plugs. KIRDA0082ED (2) G9821-32 2.0 ± 0.1 (2 ×) 4.2 ± 0.1 0.45 ± 0.1 Lead ( 2.54) 7.5 5.5 ± 0.1 M8 × 0.75 P (11) (2 ×) 2.2 ± 0.1 7.95 ± 0.1 13.45 ± 0.1 19 +0.05 -0.25 9.25 ± 0.1 JIS C5970 FC receptacle* 1.57 ± 0.1 Tolerance unless otherwise noted: ±0.2 *This is compatible with FC/PC, FC/SPC, and FC/UPC optical plugs. It is not compatible with FC/Angled PC plugs. KIRDA0083ED 2 InGaAs PIN photodiodes with preamp G9821 series Pin connections Pin no. G9821 series Vcc Vout Vee Vout + Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer ∙ Metal, ceramic, plastic products Technical information ∙ Infrared detectors Information described in this material is current as of August, 2015. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KIRD1085E03 Aug. 2015 DN 3