Low-voltage operation photo IC S7610-10 S12558-01DT High reliability photo IC operable at 2.2 V The S7610-10 and S12558-01DT are photo ICs comprised of a photodiode, amplifier, schmitt trigger circuit and output transistor, all integrated onto a single chip and molded with clear resin into a miniature package. An optical encoder resistant to tough environmental conditions can be configured by combining the S7610-10 or S12558-01DT with infrared LED L6895-10 (made by Hamamatsu). Features Applications Pd plated leads Rotary encoders, etc. Miniature package with lens Open collector output “L” level output at light input Absolute maximum ratings (Ta=25 °C) Parameter Symbol S7610-10 S12558-01DT Supply voltage Vcc -0.5 to +7 Output voltage Vo -0.5 to +7 Low level output current Io 8 Power dissipation*1 P 250 Operating temperature Topr -30 to +85 -25 to +80 Storage temperature Tstg -40 to +90 -30 to +85 *1: Power dissipation decreases at a rate of 3.3 mW/°C above Ta=25 °C . Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to product within the absolute maximum ratings. Unit V V mA mW °C °C use the Electrical and optical characteristics (Ta=25 °C, Vcc=5 V, unless otherwise noted, light source: λp=890 nm LED) Parameter Supply voltage Low level output voltage High level output current Current consumption H→L threshold S7610-10 illuminance S12558-01DT Hysterisis Symbol Vcc VOL IOH Icc L→H propagation delay time tPLH H→L propagation delay time tPHL Peak sensitivity wavelength λp Condition IOL=4 mA, E=0.4 μW/mm2 E=0 μW/mm2, Vo=5 V EHL RL=1.2 kΩ Hys ELH/EHL E0=0 μW/mm2 E1=0.4 μW/mm2 RL=1.2 kΩ CL=10 pF*2 Rise time tr Fall time tf E0=0 μW/mm2 E1=0.4 μW/mm2 RL=1.2 kΩ CL=10 pF*2 Min. 2.2 0.75 Typ. 0.05 1.3 0.10 1.0 0.85 Max. 7.0 0.4 10 3 0.25 2.0 0.95 Unit V V μA mA - 4 15 μs - 1.5 10 μs - 850 - nm - 0.07 1 μs - 0.03 1 μs μW/mm2 - *2: CL includes probe capacitance. www.hamamatsu.com 1 Low-voltage operation photo IC S7610-10, S12558-01DT Response time measurement circuit IF 5V IF 50% RL Pulse input Vo tPLH tPHL 0.1 μF VOH 90% GND 1.5 V 10% VOL tf tr KPICC0038EB Spectral response (typical example) Threshold illuminance vs. ambient temperature (S12558-01DT, typical example) (Ta=25 °C, Vcc=5 V) 100 (Ta=25 °C, Vcc=5 V, EHL=1.0) Threshold illuminance (relative value) 1.5 Relative sensitivity (%) 80 60 40 20 0 200 400 600 800 1000 1200 H→L 1 L→H 0.5 0 -50 Wavelength (nm) -25 0 25 50 75 100 Ambient temperature (°C) KPICB0181EB KPICB0029EB Directivity Power dissipation vs. ambient temperature (typical example) (Typ. Ta=25 °C) 20° 10° 0° 10° 300 20° 30° 30° S7610-10 50° 50° S12558-01DT 60° 60° 70° 70° 80° 90° 100 80° 80 60 40 20 0 20 40 60 80 90° 100 Power dissipation (mW) 40° 40° 200 100 Relative sensitivity (%) KPICB0182EB 0 -25 0 25 50 75 100 Ambient temperature (°C) KPICB0049EA 2 Low-voltage operation photo IC S7610-10, S12558-01DT Dimensional outlines (unit: mm) S7610-10 4.3 ± 0.3 (Including burr) 4.15 5° 3.0 10° 2.4 0.6 1.4 +0.6 4.43 5° 10° 0.6 ± 0.3 0.45 0.45 2.54 ± 0.5 (Specified at lead root) GND VO Vcc 15 min. (0.8) (1.2) R 0.9 4.6 - 0.3 (Including burr) 1.43 ϕ1.7 Tolerance unless otherwise noted: ±0.2, ±2° Shaded area indicates burr. Values in parentheses are reference values. Lead surface treatment: Pd plating KPICA0044EB 3 Low-voltage operation photo IC S7610-10, S12558-01DT (0.4) 1.25 ± 0.4 (0.4) (0.4) 3.0* 4.0* 3.9 3.4 4.2 ± 0.2 (Including burr) 4.0* (0.4) 3.8 Photosensitive surface Photosensitive area (0.4 × 0.4) 0.5 3.2 ± 0.2 (Including burr) 2.54 (4 ×) 0.45 (4 ×) 0.35 S12558-01DT 0.05 0.45 1.25 ± 0.4 0.75 5.5 ± 0.3 1.3 3.0* GND GND Vo Vcc 2.8 0.15 2.4 ϕ1.8 Depth 0.15 max. 2.9 3.0* Tolerance unless otherwise noted: ±0.1, ±2° Shaded area indicates burr. Chip position accuracy with respect to package dimensions marked * X, Y≤±0.2, θ≤±2° KPICA0093EA Recommended land patterns (unit: mm, S12558-01DT) 5.25 0.7 2.54 4.2 3.2 1.45 KPICC0239EA 4 Low-voltage operation photo IC S7610-10, S12558-01DT Standard packing specifications Reel (conforms to JEITA ET-7200) Dimensions 254 mm Hub diameter 80 mm Tape width 12 mm Material PS Electrostatic characteristics Antistatic treatment 4.3 ± 0.1 4.7 ± 0.1 12 ± 0.3 12 ± 0.1 4 ± 0.1 0.3 ± 0.05 5.5 ± 0.1 2 ± 0.05 ϕ1.5 1.75 ± 0.1 Embossed tape (unit: mm, material: PS, electrically conductive) ϕ1.5 ± 0.1 3.3 ± 0.1 1.6 ± 0.1 6.7 ± 0.1 KPICC0240EB Packing quantity 1500 pcs/reel Packing type Reel and desiccant in moisture-proof packaging (vacuum-sealed) 5 Low-voltage operation photo IC S7610-10, S12558-01DT Example of temperature profile measured with hot-air reflow oven for our product testing (S12558-01DT) 300 °C 240 °C max. Temperature 220 °C 190 °C 170 °C Preheat 70 to 90 s Soldering 60 s max. Time KPICB0194EA · The S12558-01DT supports lead-free soldering. After unpacking, store it in an environment at a temperature of 30 °C or less and a humidity of 60% or less, and perform soldering within 24 hours. · The effect that the product receives during reflow soldering varies depending on the circuit board and reflow oven that are used. When setting the reflow soldering conditions, check for any problems by testing out the reflow soldering methods in advance. Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Notice ∙ Metal, ceramic, plastic package products ∙ Surface-mount products Information described in this material is current as of August, 2014. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KPIC1027E06 Aug. 2014 DN 6