Toggles YB Indicators Complement to YB Pushbuttons TYPICAL INDICATOR ORDERING EXAMPLE 02 Round 03 Rectangular 05 5-volt BB White/White 12 12-volt CB Red/White EB Yellow/White FB Green/White GB Blue/White Snap-in Mounting 04 Square 05 Round 06 Rectangular Bright LED 5C Red No Code Without Panel Seal 5D Amber With Panel Seal (Bushing Mount only) 5F Green W LED Cap: Lens/Insert Colors Resistor JB Clear/White No Code No Resistor JC Clear/Red LED Colors Panel Seal 05 5-volt JD Clear/Amber 12 12-volt JF Clear/Green 24 24-volt Super Bright LED K Black only 6B White 6F Green 6G Blue Terminals JB Bicolor LED Silver Solder Lug/ W01 .110” (2.8mm) Quick Connect LED Colors Clear/White LED Cap: Lens/Insert Colors Forward Voltage 02 2-volt (no resistor) 05 5-volt 12 12-volt 24 24-volt JB Clear/White Touch 2CF Red/Green LED Cap: Lens/Insert Colors Slides Housing Rockers Solid Cap: Lens/Insert Colors Pushbuttons Incandescent Lamp Keylocks Square Cap Types & Colors DESCRIPTION FOR TYPICAL ORDERING EXAMPLE YB04KW01-12-FB M Green Solid Cap 12-volt Incandescent Lamp Square with Snap-in Mounting Black Housing Silver Solder Lug/.110” (2.8mm) Quick Connect Terminals www.nkk.com Indicators 01 Lamps Rotaries Bushing Mounting FB Tactiles Shapes 12 Programmable Illuminated PB W01 Tilt K Accessories 04 Supplement YB M27 YB Indicators Toggles Complement to YB Pushbuttons SHAPES & MOUNTING TYPES Bushing Mounting 02 Square Round 03 Rectangular 04 05 Square 06 Round Rectangular Pushbuttons Rockers 01 Snap-in Mounting Programmable Illuminated PB Bushing Mounting Keylocks Bezel-barrier is an integral part of the indicator body. Supplied with mounting nut. PANEL SEAL No Code W Without Panel Seal Snap-in Mounting Supplied with mounting nut and o-ring AT089. Rotaries Slides The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Tactiles AT611 12 V 5V AC 12V AC Current I 115mA 60mA .150 .150 Endurance Hours 7,000 average Tilt Ambient Temperature Range –25°C ~ +50°C Solid Cap for Incandescent Lamp Touch Indicators 05 Voltage MSCP Lens/Insert Colors Available: Accessories Bushing Mounting only INCANDESCENT LAMP & SOLID CAP T-1 Bi-pin Supplement With Panel Seal BB M White/White CB Red/White EB Yellow/White FB Green/White GB Blue/White AT3001 Square AT3003 Rectangular (15.0) Sq .591 (15.0) .591 (12.2) .480 (12.2) .480 (4.0) .157 (4.0) .157 Translucent White Insert (15.0) Dia .591 AT3002 Round (12.2) .480 (4.0) .157 Materials:Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Filter) Finish:Glossy M28 Translucent Colored Lens (21.0) .827 Translucent White Seal/Filter Incandescent Lamp AT611 www.nkk.com YB Indicators Toggles Complement to YB Pushbuttons BRIGHT LEDS & LED CAPS Rockers The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Colors Available: (+) (-) T-1 Bi-pin 5C 5D Red Amber 5F No Code Green Unit No Resistor Maximum Forward Current IFM 40 40 40 mA Typical Forward Current IF 26 26 26 mA Forward Voltage VF 1.9 2.0 2.0 V Maximum Reverse Voltage VRM 4 4 4 V Current Reduction Rate Above 25°C ∆IF Ambient Temperature Range 0.50 mA/°C –25 ~ +50 °C Programmable Illuminated PB Bright AT628 Pushbuttons Electrical Specifications for Bright LED without Resistor Electrical Specifications for Bright LED with Resistor Colors Available: 5F 05 12 24 Unit Maximum Forward Current IFM — — — mA Typical Forward Current IF 25 20 10 mA Forward Voltage VF 5 12 24 V Maximum Reverse Voltage VRM 4 8 16 V Current Reduction Rate Above 25°C ∆IF — — — mA/°C Ambient Temperature Range AT634 5-volt, (+) 2-element with Resistor (-) –25 ~ +50 AT634 12-volt, (+) 4-element with Resistor (-) Keylocks Green Amber Rotaries 5D Red °C Slides T-11⁄4 Bi-pin 5C AT634 (+) 24-volt, 4-element with Resistor (-) Tactiles Bright AT634 Cap for Bright LED JD JF Clear/Red Clear/Amber Clear/Green (12.2) .480 (4.0) .157 AT3005 Round Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) Finish:Glossy Tilt (21.0) .827 (15.0) .591 Transparent Clear Lens (12.2) .480 (4.0) .157 Touch (15.0) Sq .591 Translucent Colored Insert M (15.0) Dia .591 Translucent White Seal/Diffuser (12.2) .480 (4.0) .157 Bright LEDs AT628 AT634 www.nkk.com Indicators JC Clear/White AT3006 Rectangular Accessories JB AT3004 Square Supplement Lens/Insert Colors Available: M29 Toggles YB Indicators Complement to YB Pushbuttons SUPER BRIGHT LEDS & LED CAPS Rockers The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Programmable Illuminated PB Pushbuttons Super Bright AT625G Blue AT631B White AT632F Green Keylocks T-1 Bi-pin ATTENTION ELECTROSTATIC SENSITIVE DEVICES (+) (-) Colors: 6B 6F 6G White Green Blue Unit Maximum Forward Current IFM 30 30 30 mA Typical Forward Current IF 20 20 20 mA Forward Voltage VF 3.3 3.3 3.3 V Maximum Reverse Voltage VRM 7 7 7 V Current Reduction Rate Above 25°C ∆IF 0.40 0.40 0.40 mA/°C Ambient Temperature Range –25 ~ +50 Rotaries Cap for Super Bright LED AT3014 Square AT3015 Round Slides (15.0) Sq .591 (15.0) .591 (15.0) Dia .591 (12.2) .480 (4.0) .157 JB Touch M Translucent White Insert Clear/White Translucent White Seal/Diffuser Accessories Indicators Lens/Insert Colors Available: Super Bright LEDs AT625 AT631 AT632 Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) M30 www.nkk.com (21.0) .827 (12.2) .480 (4.0) .157 (12.2) .480 (4.0) .157 Tilt Tactiles AT3016 Rectangular Transparent Clear Lens Supplement °C YB Indicators Toggles Complement to YB Pushbuttons BICOLOR LED & LED CAPS 24 Unit Pushbuttons 12 Maximum Forward Current IFM 60 60 20 12 mA Typical Forward Current IF 45 45 15 10 mA Forward Voltage (Red/Green) VF 1.9 / 2.1 5 12 24 V Current Reduction Rate Above 25°C ∆IF 0.80 ---- ---- ---- mA/°C Ambient Temperature Range T-11⁄2 Bi-pin AT621 Bicolor LED 2-volt 6-element w/o Resistor 05 (+) (-) AT621 Bicolor LED 5-volt 6-element with Resistor –25 ~ +50 (-) (+) AT621 Bicolor LED 12 & 24-volt 6-element with Resistor Programmable Illuminated PB Red/Green 02 °C (+) (-) As shown for Red; Reverse polarity for Green Rotaries 2CF Bicolor LED is translucent white in OFF state. Keylocks Bicolor AT621 Rockers The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. LED Caps (15.0) Sq .591 (15.0) Dia .591 (15.0) .591 (12.2) .480 (4.0) .157 (21.0) .827 (12.2) .480 (4.0) .157 Tilt (12.2) .480 (4.0) .157 AT3006 Rectangular Slides AT3005 Round Tactiles AT3004 Square Lens/Insert Colors Available: Transparent White Insert JB M Clear/White Supplement Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) Accessories Translucent White Seal/Diffuser Bicolor LED AT621 www.nkk.com Indicators Touch Transparent Clear Lens M31 Toggles YB Indicators Complement to YB Pushbuttons TYPICAL INDICATOR DIMENSIONS (1.2) x (2.0) .047 x .079 M16 P1 NC NO (9.4) .370 NO Rockers Square • Bushing Mounting Pushbuttons L -+ COM (0.5) Typ .020 (3.7) .146 (2.8) .110 Programmable Illuminated PB (15.0) Sq .591 (18.0) Sq .709 (7.3) .287 (7.3) .288 (24.3) .957 (8.3) .327 0.2 (16.0) +– 0.0 Dia .630 Panel Thickness .020” ~ .197” (0.5mm ~ 5.0mm) YB01KW01-12-CB Keylocks Round • Panel Seal NC Rotaries NO (1.2) x (2.0) .047 x .079 M16 P1 NO (9.4) .370 L -+ COM (0.5) Typ .020 (3.7) .146 Slides (2.8) .110 (3.0) .118 (0.5) .020 (5.3) .209 (7.2) .283 (24.3) .957 (7.3) .288 Tactiles (15.0) Dia .591 (18.0) Dia .709 0.2 (16.0) +– 0.0 Dia .630 Panel Thickness .020” ~ .197” (0.5mm ~ 5.0mm) Tilt YB02WKW01-12-CB Touch Rectangular • Snap-in Mounting NC NO NO (1.2) x (2.0) Typ .047 x .079 L -+ M Supplement (2.8) Typ .110 (0.5) Typ .020 (3.7) .146 (7.3) .288 (21.0) .827 Accessories Indicators COM (15.0) .591 (18.0) .709 (24.0) .945 (8.3) .327 (24.3) .957 (1.2) R .047 0.2 (16.0) +– 0.0 Dia .630 Panel Thickness .039” ~ .138” (1.0mm ~ 3.5mm) YB06KW01-12-CB M32 www.nkk.com Notes www.nkk.com M33 Notes M34 www.nkk.com