Complement to YB Pushbuttons YB Indicators TYPICAL INDICATOR ORDERING EXAMPLE YB K 04 12 W01 SHAPES FB LAMPS CAP TYPES & COLORS Incandescent Lamp Solid Cap: Lens/Insert Colors Bushing Mounting 01 Square 02 Round 05 5-volt BB White/White 03 Rectangular 12 12-volt CB Red/White EB Yellow/White Snap-in Mounting 04 Square FB Green/White 05 Round GB Blue/White 06 Rectangular Resistor JB Clear/White No Code No Resistor JC Clear/Red 5-volt JD Clear/Amber 12 12-volt JF Clear/Green 24 24-volt LED Colors PANEL SEAL No Without Panel Seal Code With Panel Seal (Bushing Mount only) W LED Cap: Lens/Insert Colors Bright LED 5C Red 5D Amber 5F Green 05 Super Bright LED K HOUSING 6B White Black only 6F Green 6G Blue TERMINALS W01 LED Cap: Lens/Insert Colors JB Bicolor LED LED Colors Silver Solder Lug/.110” (2.8mm) Quick Connect 2CF Red/Green Clear/White LED Cap: Lens/Insert Colors Forward Voltage 02 2-volt (no resistor) 05 5-volt 12 12-volt 24 24-volt JB Clear/White DESCRIPTION FOR TYPICAL ORDERING EXAMPLE YB04KW01-12-FB Square with Snap-in Mounting Green Solid Cap 12-volt Incandescent Lamp Black Housing Silver Solder Lug/.110” (2.8mm) Quick Connect Terminals NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 YB Indicators Complement to YB Pushbuttons SHAPES & MOUNTING TYPES Bushing Mounting 01 02 Square Round Snap-in Mounting 03 Rectangular 04 05 Square 06 Round Rectangular Bezel-barrier is an integral part of the indicator body. PANEL SEAL No Code W Without Panel Seal Bushing Mounting Snap-in Mounting With Panel Seal Bushing Mounting only Supplied with mounting nut and o-ring AT089. Supplied with mounting nut. INCANDESCENT LAMP & SOLID CAP The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. AT611 12 Voltage V 5V AC 12V AC Current I 115mA 60mA .150 .150 MSCP Endurance T-1 Bi-pin 05 Hours 7,000 average Ambient Temperature Range –25°C ~ +50°C Solid Cap for Incandescent Lamp Lens/Insert Colors Available: BB White/ White CB Red/ White EB Yellow/ White FB Green/ White GB Blue/ White AT3001 Square AT3003 Rectangular (15.0) Sq .591 (15.0) .591 (12.2) .480 (12.2) .480 (4.0) .157 (4.0) .157 AT3002 Round Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Filter) Finish: Glossy Translucent Colored Lens (21.0) .827 Translucent White Insert (15.0) Dia .591 (12.2) .480 (4.0) .157 Translucent White Seal/Filter Incandescent Lamp AT611 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 YB Indicators Complement to YB Pushbuttons BRIGHT LEDS & LED CAPS The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Electrical Specifications for Bright LED without Resistor Bright AT628 Colors Available: (+) (-) 5C Red 5D Amber 5F Green No Code Unit IFM 40 40 40 mA Continuous Forward Current IF 26 26 26 mA Forward Voltage VF 1.9 2.0 2.2 V Reverse Peak Voltage VRM 4 4 4 V Current Reduction Rate Above 25°C ∆IF Ambient Temperature Range T-1 Bi-pin No Resistor Forward Peak Current 0.50 mA/°C –25 ~ +50 °C Electrical Specifications for Bright LED with Resistor Bright AT634 Colors Available: Red 5D Amber 5F Green 05 12 24 Unit Forward Peak Current IFM — — — mA Continuous Forward Current IF 25 20 10 mA Forward Voltage VF 5 12 24 V Reverse Peak Voltage VRM 4 8 16 V Current Reduction Rate Above 25°C ∆IF — — — mA/°C Ambient Temperature Range T-11⁄4 Bi-pin AT634 5-volt, 2-element with Resistor 5C (+) (-) –25 ~ +50 AT634 12-volt, (+) 4-element with Resistor (-) °C AT634 (+) 24-volt, 4-element with Resistor (-) Cap for Bright LED Lens/Insert Colors Available: JB Clear/White JC Clear/Red JD Clear/Amber JF AT3004 Square AT3006 Rectangular (15.0) Sq .591 (21.0) .827 (15.0) .591 (12.2) .480 (4.0) .157 Clear/Green Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) Finish: Glossy AT3005 Round Transparent Clear Lens (12.2) .480 (4.0) .157 (15.0) Dia .591 Translucent Colored Insert Translucent White Seal/Diffuser (12.2) .480 (4.0) .157 Bright LEDs AT628 AT634 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Complement to YB Pushbuttons YB Indicators SUPER BRIGHT LEDS & LED CAPS The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Super Bright AT625G Blue AT631B White AT632F Green T-1 Bi-pin Attention Electrostatic Sensitive Devices (+) (-) Colors: 6B 6F 6G White Green Blue Unit Forward Peak Current IFM 30 30 30 mA Continuous Forward Current IF 20 20 20 mA Forward Voltage VF 3.6 3.5 3.6 V Reverse Peak Voltage VRM 5 5 5 V Current Reduction Rate Above 25°C ∆IF Ambient Temperature Range 0.50 mA/°C –25 ~ +50 °C Cap for Super Bright LED AT3014 Square AT3015 Round (15.0) Sq .591 (12.2) .480 (4.0) .157 AT3016 Rectangular (15.0) .591 (15.0) Dia .591 (12.2) .480 (4.0) .157 (21.0) .827 (12.2) .480 (4.0) .157 Transparent Clear Lens Lens/Insert Colors Available: JB Clear/White Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) Translucent White Insert Translucent White Seal/Diffuser Super Bright LEDs AT625 AT631 AT632 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Complement to YB Pushbuttons YB Indicators BICOLOR LED & LED CAPS The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Bicolor AT621 2CF Bicolor LED is translucent white in OFF state. Red/Green 05 12 24 Unit Forward Peak Current IFM 60 60 20 12 mA Continuous Forward Current IF 45 45 15 10 mA Forward Voltage VF 2.1 5 12 24 V Current Reduction Rate Above 25°C ∆IF 0.80 ---- ---- ---- mA/°C Ambient Temperature Range T-11⁄2 Bi-pin AT621 Bicolor LED 2-volt 6-element w/o Resistor 02 (+) (-) AT621 Bicolor LED 5-volt 6-element with Resistor –25 ~ +50 (-) (+) AT621 Bicolor LED 12 & 24-volt 6-element with Resistor °C (+) (-) As shown for Red; Reverse polarity for Green LED Caps AT3004 Square AT3005 Round (15.0) Sq .591 (12.2) .480 (4.0) .157 AT3006 Rectangular (15.0) Dia .591 (15.0) .591 (12.2) .480 (4.0) .157 (21.0) .827 (12.2) .480 (4.0) .157 Transparent Clear Lens Lens/Insert Colors Available: Transparent White Insert JB Clear/White Translucent White Seal/Diffuser Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) Bicolor LED AT621 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 YB Indicators Complement to YB Pushbuttons TYPICAL SWITCH DIMENSIONS Square • Bushing Mounting (1.2) x (2.0) Typ .047 x .079 NC NO M15.8 P1 NO (9.4) .370 L -+ COM (2.8) Typ .110 (15.0) Sq .591 (18.0) Sq .709 (8.3) .327 (10.9) .429 (24.3) .957 (0.5) Typ .020 (3.7) .146 (7.3) .288 0.2 (16.0) +– 0.0 Dia .630 Panel Thickness .020” ~ .197” (0.5mm ~ 5.0mm) YB01KW01-12-CB Round • Panel Seal NC NO (1.2) x (2.0) Typ .047 x .079 M15.8 P1 NO (9.4) .370 L -+ COM (0.5) Typ .020 (3.7) .146 (2.8) Typ .110 (15.0) Dia .591 (18.0) Dia .709 (3.0) .118 (0.5) .020 (5.3) .209 (10.9) .429 (24.3) .957 (7.3) .288 0.2 (16.0) +– 0.0 Dia .630 Panel Thickness .020” ~ .197” (0.5mm ~ 5.0mm) YB02WKW01-12-CB Rectangular • Snap-in Mounting NC NO NO (1.2) x (2.0) Typ .047 x .079 L -+ COM (15.0) .591 (18.0) .709 (2.8) Typ .110 (0.5) Typ .020 (3.7) .146 (7.3) .288 (21.0) .827 (24.0) .945 (8.3) .327 (24.3) .957 (1.2) R .047 0.2 (16.0) +– 0.0 Dia .630 YB06KW01-12-CB Panel Thickness .039” ~ .138” (1.0mm ~ 3.5mm) NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07