VLMW1300 www.vishay.com Vishay Semiconductors Highbright 0603 ChipLED FEATURES • High efficient InGaN technology • Super thin ChipLED with exceptional brightness 1.6 mm x 0.8 mm x 0.55 mm (L x W x H) • High reliability PCB based • Temperature range -20 °C to +80 °C • Chromaticity coordinate categorized according to CIE 1931 per packing unit • Typical color temperature 7000 K • EIA standard package DESCRIPTION • Compatible to IR reflow soldering The new 0603 ChipLED series have been designed in the smallest SMD package. This innovative 0603 ChipLED technology opens the way to • Available on 7" diameter reel • Preconditioning according to JEDEC® level 2a • Smaller products of higher performance • ESD-sensitive device • More design in flexibility • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Enhanced applications The 0603 LED is an obvious solution for small-scale products that are expected to work reliably in an arduous environment. APPLICATIONS • Telecommunication: telephone and fax This package is filled with a mixture of epoxy and yellow converter. indicator and backlighting in • Backlighting for audio and video equipment • Backlighting in office equipment This yellow converter converts the blue emission partially to yellow, which mixes the remaining blue to give white. • Indoor and outdoor message boards • Flat backlight for LCDs, switches, and symbols PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD 0603 ChipLED • Product series: standard • Angle of half intensity: ± 65° PARTS TABLE PART VLMW1300-GS08 COLOR White LUMINOUS INTENSITY COORDINATE FORWARD VOLTAGE at IF at IF at IF (mcd) (x, y) (V) TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. 45 - 180 5 - 0.294, 0.286 - 5 2.70 - 3.15 5 InGaN/ yellow converter ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMW1300 PARAMETER DC forward current Surge forward current Power dissipation TEST CONDITION SYMBOL VALUE UNIT Tamb ≤ 25 °C IF 20 mA tp ≤ 10 μs IFSM 0.1 A PV 70 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -55 to +105 °C RthJA 550 K/W Thermal resistance junction/ambient Rev. 1.2, 22-Sep-14 Document Number: 82435 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1300 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMW1300, WHITE PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity IF = 5 mA IV 45 - 180 mcd Chromatically coordinate x acc. to CIE 1931 IF = 5 mA x - 0.294 - Chromatically coordinate y acc. to CIE 1931 IF = 5 mA y - 0.286 - Angle of half intensity IF = 5 mA ϕ - ± 65 - Forward voltage IF = 5 mA VF 2.70 - 3.15 V Reverse current (1) VR = 5 V IR - 10 - μA deg Note (1) Driving the LED in reverse direction is suitable for short term application LUMINOUS INTENSITY CLASSIFICATION GROUP LUMINOUS INTENSITY (mcd) at 5 mA FORWARD VOLTAGE CLASSIFICATION GROUP FORWARD VOLTAGE (V) MIN. MAX. 2.85 MIN. MAX. A 2.7 P 45 71 B 2.85 3.0 Q 71 112 C 3.0 3.15 R 112 180 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 15 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable. Note • Forward voltage is measured with a tolerance of ± 0.1 V. CHROMATICITY COORDINATED GROUPS FOR WHITE SMD LED S1 S2 S3 X Y X Y 0.274 0.226 0.294 0.286 0.274 0.258 0.294 0.319 0.294 0.286 0.314 0.347 0.294 0.254 0.314 0.315 0.274 0.258 0.314 0.282 0.274 0.291 0.314 0.315 0.294 0.319 0.334 0.343 0.294 0.286 0.334 0.311 0.294 0.254 0.314 0.315 0.294 0.286 0.314 0.347 0.314 0.315 0.334 0.376 0.314 0.282 0.334 0.343 S4 S5 S6 Note • Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ± 0.01. Rev. 1.2, 22-Sep-14 Document Number: 82435 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1300 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 4 Relative Luminous Intensity Normalized at 5 mA IF - Forward Current (A) 25 20 15 10 5 3 2 1 0 0 0 20 40 60 80 100 0 10 Tamb Ambient Temperature (°C) Fig. 1 - Forward Current vs. Ambient Temperature Irel - Relative Luminous Intensity Irel - Relative Intensity 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1 0.1 0 400 450 500 550 600 650 700 750 800 0 λ - Wavelength (nm) 10 20 30 40 50 60 70 80 Tamb - Ambient Temperature (°C) Fig. 2 - Relative Intensity vs. Wavelength Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature 50 0.40 y-Coordinates of Colorgroups IF - Forward Current (mA) 40 10 0.9 40 30 20 10 3.0 3.5 4.0 4.5 5.0 VF - Forward Voltage (V) Fig. 3 - Forward Current vs. Forward Voltage Rev. 1.2, 22-Sep-14 30 Fig. 4 - Relative Luminous Intensity vs. Forward Current 1.0 0 2.5 20 IF - Forward Current (mA) 0.38 0.36 S6 0.34 0.32 S4 S5 0.30 S2 0.28 0.26 S3 S1 0.24 0.22 0.20 0.25 0.27 0.29 0.31 0.33 0.35 x-Coordinates of Colorgroups Fig. 6 - Coordinates of Colorgroups Document Number: 82435 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1300 www.vishay.com 10° 20° 30° 40° 1.0 50° 0.9 60° 0.8 70° 0.7 80° 0.6 0.4 0.2 ϕ - Angular Displacement Irel - Relative Luminous Intensity 0° Vishay Semiconductors 0 Fig. 7 - Relative Luminous Intensity vs. Angular Displacement Ø 60 ± 1 Ø 178 ± 2 Ø 13 REEL DIMENSIONS in millimeters 9.4 ± 1.5 Drawing-No.: 9.800-5122.01-4 Issue: 2; 03.11.11 22611 Rev. 1.2, 22-Sep-14 technical drawings according to DIN specifications Document Number: 82435 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1300 www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 0.25 0.7 B - B (5:1) 8 + 0.3 - 0.1 1.75 ± 0.1 B B Ø 1.55 ± 0.05 Ø 0.5 2 ± 0.05 4 ± 0.1 4 ± 0.1 User feed direction Cathode 3.5 ± 0.05 technical drawings according to DIN specifications Drawing-No.: 9.700-5385.01-4 Issue: 1; 17.10.11 22612 Rev. 1.2, 22-Sep-14 Document Number: 82435 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1300 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.3 0.3 0.8 0.77 Recommended solder pad footprint 0.8 2.3 0.28 0.55 1.1 0.8 0.3 Cathode 1.6 technical drawings according to DIN specifications Not indicated tolerances ± 0.2 Drawing-No.: 6.541-5091.01-4 Issue: 1; 17.10.11 22613 SOLDERING PROFILE IR Reflow Soldering Profile for lead (Pb)-free Soldering Preconditioning acc. to JEDEC Level 2a 300 Temperature (°C) max. 260 °C 245 °C 255 255 °C 240 °C 217 °C 250 200 max. 30 s 150 max. 100 s max. 120 s 100 max. Ramp Up 3 °C/s 50 max. Ramp Down 6 °C/s 0 0 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed Fig. 8 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020C) Rev. 1.2, 22-Sep-14 Document Number: 82435 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1300 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (Example) RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: A B C D • Storage temperature 10 °C to 30 °C L E I G F H M K A. 2D barcode B. PartNo = Vishay part number C. QTY = Quantity D. SelCode = selection code (binning) E. PTC = Code of manufacturing plant F. Batch = date code: year / week / plant code G. Region code H. SL = sales location I. Terminations finishing J. Lead (Pb)-free symbol K. Halogen-free symbol L. RoHS symbol • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES 2a DRY PACKING 1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH) The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. 2. After this bag is opened devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 260°C) must be: a) Mounted within 672 hours at factory condition of < 30°C/60%RH or b) Stored at <10% RH. Aluminum bag 3. Devices require baking before mounting if: a) Humidity Indicator Card is >10% when read at 23°C + 5°C or b) 2a or 2b is not met. Label 4. If baking is required, devices may be baked for: 192 hours at 40°C + 5°C/-0°C and <5%RH (dry air/nitrogen) or o or 96 hours at 60±5 Cand <5%RH For all device containers 24 hours at 100±5°C Not suitable for reels or tubes Bag Seal Date: ______________________________ (If blank, see bar code label) Note: LEVEL defined by EIA JEDEC Standard JESD22-A113 Reel 15973 19786 Example of JESD22-A112 level 2a label ESD PRECAUTION FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electrostatic sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABEL The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. Rev. 1.2, 22-Sep-14 Document Number: 82435 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000