TLSV5100 www.vishay.com Vishay Semiconductors Bicolor Symbol LED in 2.5 mm x 5 mm Untinted Top-Diffused Package FEATURES • Even luminance of the emitting surface • Ideal as flush mounted panel indicators • For DC and pulse operation • Color mixing possible due to separate anode terminals • Luminous intensity selected into groups • Categorized for green color 9611496 • Wide viewing angle PRODUCT GROUP AND PACKAGE DATA • Common cathode • Product group: LED • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 • Package: 2.5 mm x 5 mm symbol • Product series: bicolor APPLICATIONS • Angle of half intensity: ± 50° • Indicating and illumination purposes PARTS TABLE PART COLOR LUMINOUS INTENSITY at IF (mcd) (mA) MIN. TYP. MAX. WAVELENGTH (nm) MIN. TYP. MAX. at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. at IF (mA) TECHNOLOGY TLSV5100 Red 0.63 1 - 10 612 - 625 10 - 2.0 3.0 20 GaP on GaP TLSV5100 Green 0.63 1 - 10 562 - 575 10 - 2.4 3.0 20 GaP on GaP ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLSV5100 SYMBOL VALUE Reverse voltage per diode PARAMETER TEST CONDITION VR 6 UNIT V DC forward current per diode IF 30 mA tp 10 ms IFSM 1 A Power dissipation per diode Tamb 55 °C PV 100 mW Total power dissipation Tamb 55 °C Ptot 150 mW Tj 100 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 55 to + 100 °C Tsd 260 °C Thermal resistance junction/ambient per diode RthJA 450 K/W Thermal resistance junction/ambient total RthJA 300 K/W Surge forward current per diode Junction temperature Soldering temperature Rev. 1.7, 23-May-13 t 5 s, 2 mm from body Document Number: 83052 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLSV5100 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLSV5100R, RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 10 mA lV 0.63 1 - mcd Dominant wavelength IF = 10 mA d 612 - 625 nm Peak wavelength IF = 10 mA p - 635 - nm deg Angle of half intensity IF = 10 mA - ± 50 - Forward voltage IF = 20 mA VF - 2.0 3.0 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance Note (1) In one packing unit I Vmin./IVmax. 0.5 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLSV5100G, GREEN PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 10 mA lV 0.63 1 - mcd Dominant wavelength IF = 10 mA d 562 - 575 nm Peak wavelength IF = 10 mA p - 565 - nm deg Angle of half intensity IF = 10 mA - ± 50 - Forward voltage IF = 20 mA VF - 2.4 3.0 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance Note (1) In one packing unit I Vmin./IVmax. 0.5 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 60 100 IF - Forward Current (mA) PV - Power Dissipation (mW) 125 75 50 25 0 50 40 30 20 10 0 0 95 9983 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation vs. Ambient Temperature Rev. 1.7, 23-May-13 0 95 9984 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 2 - Forward Current vs. Ambient Temperature for InGaN Document Number: 83052 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLSV5100 www.vishay.com Vishay Semiconductors tp/T = 0.01 1000 0.02 0.05 0.1 100 0.2 0.5 1 10 Tamb ≤ 55 °C 1 0.01 0.1 1 1.6 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 10 000 red 1.2 0.8 0.4 IF = 10 mA 0 10 0 100 95 10027 tp - Pulse Length (ms) Fig. 3 - Forward Current vs. Pulse Length 0° 10° 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement IV rel - Relative Luminous Intensity 40° 1.0 80° 0.4 0.2 60 80 100 20° 30° 0.6 40 Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature 0 IV rel - Relative Luminous Intensity 95 10085 20 Tamb - Ambient Temperature (°C) 2.4 red 2.0 1.6 1.2 0.8 0.4 0 95 10321 10 1 20 0.5 50 0.2 100 200 0.1 0.05 500 IF (mA) 0.02 tp/T 95 10082 Fig. 4 - Relative Luminous Intensity vs. Angular Displacement Fig. 7 - Relative Luminous Intensity vs. Forward Current/Duty Cycle IV rel - Relative Luminous Intensity 1000 IF - Forward Current (mA) red 100 tp/T = 0.001 tp = 10 µs 10 1 0.1 0 95 10026 2 4 6 8 10 VF - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage Rev. 1.7, 23-May-13 10 red 1 0.1 0.01 1 95 10029 10 100 IF - Forward Current (mA) Fig. 8 - Relative Luminous Intensity vs. Forward Current Document Number: 83052 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLSV5100 www.vishay.com Vishay Semiconductors Ispec - Specific Luminous Intensity IV rel - Relative Luminous Intensity 1.2 red 1.0 0.8 0.6 0.4 0.2 0 590 630 650 1.6 1.2 0.8 0.4 690 670 λ - Wavelength (nm) 100 tp/T = 0.001 tp = 10 µs 10 1 2 4 6 50 100 200 0.5 0.2 0.1 0.05 8 500 IF (mA) 0.02 tp/T 10 IV rel - Relative Luminous Intensity green 95 10034 20 1 Fig. 12 - Specific Luminous Intensity vs. Forward Current 1000 0.1 0 10 95 10263 Fig. 9 - Relative Intensity vs. Wavelength IF - Forward Current (mA) green 2.0 0 610 95 10040 green 1 0.1 10 VF - Forward Voltage (V) 1 10 100 IF - Forward Current (mA) 95 10037 Fig. 10 - Forward Current vs. Forward Voltage Fig. 13 - Relative Luminous Intensity vs. Forward Current 1.6 1.2 green green 1.0 1.2 Irel - Relative Intensity IV rel - Relative Luminous Intensity 2.4 0.8 0.4 IF = 10 mA 0 0.8 0.6 0.4 0.2 0 0 95 10035 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 11 - Relative Luminous Intensity vs. Ambient Temperature Rev. 1.7, 23-May-13 520 95 10038 540 560 580 600 620 λ - Wavelength (nm) Fig. 14 - Relative Intensity vs. Wavelength Document Number: 83052 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLSV5100 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 95 11327 Rev. 1.7, 23-May-13 Document Number: 83052 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000