PAN13x5B DS

CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
1 of 61
DATE
28.02..2014
Product Specification
Applicant / Manufacturer
Hardware
Panasonic Industrial Devices Europe GmbH
Zeppelinstrasse 19
21337 Lüneburg
Germany
Applicant / Manufacturer
Software
Not applicable
Software Version
Not applicable
Contents
Approval for Mass Production
Customer
Bluetooth QDL ID
Qualified Design Listing (QDL) ID: B019784
As Controller Sub-System Listing for PAN13xx Series.
By purchase of any products described in this document the customer accepts the
document's validity and declares their agreement and understanding of its contents
and recommendations. Panasonic reserves the right to make changes as required
without notification.
Power Electronics R&D Center
Wireless Connectivity
Panasonic Industrial Devices Europe GmbH
APPROVED
CHECKED
DESIGNED
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
2 of 61
DATE
28.02..2014
TABLE OF CONTENTS
1
2
3
4
5
6
7
8
9
10
11
12
13
Scope of this Document .................................................................................................. 5
1.1 New PAN13x5B, PAN13x6B ................................................................................. 5
Key Features ................................................................................................................... 6
2.1 Software Block Diagram ........................................................................................ 6
Applications for the Module ............................................................................................. 7
Description for the Module .............................................................................................. 7
Detailed Description ........................................................................................................ 8
5.1 Terminal Layout ..................................................................................................... 8
5.1.1 5.1.1. Terminal Layout PAN131x without antenna ................................... 8
5.1.2 5.1.2. Terminal Layout PAN132x with antenna ........................................ 9
5.2 Pin Description ..................................................................................................... 10
5.3 Device Power Supply ........................................................................................... 11
5.4 Clock Inputs ......................................................................................................... 12
Bluetooth Features ........................................................................................................ 12
Block Diagram ............................................................................................................... 13
Test Conditions ............................................................................................................. 14
General Device Requirements and Operation .............................................................. 14
9.1 Absolute Maximum Ratings ................................................................................. 14
9.2 Recommended Operating Conditions .................................................................. 15
9.3 Current Consumption ........................................................................................... 16
9.4 General Electrical Characteristics ........................................................................ 17
9.5 nSHUTD Requirements ....................................................................................... 17
9.6 External Digital Slow Clock Requirements .......................................................... 17
Host Controller Interface ............................................................................................... 18
Audio/Voice Codec Interface......................................................................................... 19
11.1 PCM Hardware Interface ..................................................................................... 19
11.2 Data Format ......................................................................................................... 19
11.3 Frame Idle Period ................................................................................................ 20
11.4 Clock-Edge Operation ......................................................................................... 21
11.5 Two-Channel PCM Bus Example ........................................................................ 21
11.6 Audio Encoding.................................................................................................... 21
11.7 Improved Algorithm For Lost Packets .................................................................. 22
11.8 Bluetooth/PCM Clock Mismatch Handling ........................................................... 22
11.9 Bluetooth Inter-IC Sound (I2S) ............................................................................ 22
11.10 Current Consumption for Different Bluetooth Scenarios ...................................... 23
Bluetooth RF Performance............................................................................................ 23
Soldering Temperature-Time Profile (for reflow soldering) ........................................... 26
13.1 For lead solder ..................................................................................................... 26
13.2 For leadfree solder ............................................................................................... 27
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
3 of 61
DATE
28.02..2014
Module Dimension ........................................................................................................ 28
14.1 Module Dimensions PAN131X without Antenna .................................................. 28
14.2 Module Dimensions PAN132X with Antenna ....................................................... 29
Footprint of the Module ................................................................................................. 30
15.1 Footprint PAN131x without antenna .................................................................... 30
15.2 Footprint PAN132x with antenna ......................................................................... 31
Labeling Drawing .......................................................................................................... 32
Mechanical Requirements............................................................................................. 32
Recommended Foot Pattern ......................................................................................... 33
18.1 recommended foot pattern PAN131x without antenna ........................................ 33
18.2 recommended foot pattern PAN132x with antenna ............................................. 34
Radiation Pattern .......................................................................................................... 35
Layout Recommendations with Antenna (PAN132x) .................................................... 36
Bluetooth LE (LOW ENERGY) PAN1316/26 ................................................................ 36
21.1 Network Topology ................................................................................................ 36
21.2 module features ................................................................................................... 37
21.3 Current consumption for different LE scenarios .................................................. 38
ANT PAN1317/27.......................................................................................................... 38
22.1 Network topology ................................................................................................. 38
22.2 module features .................................................................................................. 39
22.3 ANT Current consumption ................................................................................... 39
Triple mode (BR/EDR + Bluetooth low energy or ANT) PAN1323 ............................... 40
23.1 Triple Mode Current consumption ....................................................................... 40
Development of Applications......................................................................................... 41
24.1 Tools to be needed .............................................................................................. 41
List of Profiles ............................................................................................................... 42
Reliability Tests ............................................................................................................. 42
Cautions ........................................................................................................................ 43
27.1 Design Notes ....................................................................................................... 43
27.2 Installation Notes ................................................................................................. 43
27.3 Usage Conditions Notes ...................................................................................... 44
27.4 Storage Notes ...................................................................................................... 44
27.5 Safety Cautions ................................................................................................... 45
27.6 Other cautions ..................................................................................................... 45
Packaging ..................................................................................................................... 46
28.1 Packaging of PAN131x without antenna ............................................................. 46
28.2 Packaging for PAN132x with antenna ................................................................. 49
Ordering Information ..................................................................................................... 50
Data Sheet Status ......................................................................................................... 51
History for this Document .............................................................................................. 52
Related Documents....................................................................................................... 53
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
33
34
35
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
4 of 61
DATE
28.02..2014
General Information ...................................................................................................... 54
Regulatory Information .................................................................................................. 54
34.1 FCC for US .......................................................................................................... 54
34.1.1 FCC Notice ............................................................................................. 54
34.1.2 Caution ................................................................................................... 55
34.1.3 Labeling Requirements .......................................................................... 55
34.1.4 Antenna Warning .................................................................................... 55
34.1.5 Approved Antenna List (PAN1315, PAN1325) ....................................... 56
34.1.6 Approved Antenna List (PAN1316, PAN1317, PAN1326, PAN1327) .... 56
34.1.7 RF Exposure PAN13xx .......................................................................... 56
34.2 Industry Canada Certification .............................................................................. 57
34.2.1 IC Notice ................................................................................................. 57
34.2.2 Labeling Requirements .......................................................................... 58
34.3 European R&TTE Declaration of Conformity ....................................................... 59
34.4 NCC for Taiwan ................................................................................................... 60
34.4.1 Labeling Requirements .......................................................................... 60
34.4.2 NCC Statement ...................................................................................... 60
34.5 Bluetooth SIG Statement ..................................................................................... 60
Life Support Policy ........................................................................................................ 61
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
1
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
5 of 61
DATE
28.02..2014
SCOPE OF THIS DOCUMENT
This product specification describes Panasonic’s HCI, Class 1.5 , TI based,
Bluetooth® 1 modules, series number 13xx.
For detailed family overview that includes part numbers see Chapter 28,
Ordering Information.
Non-antenna versions will be refered to as PAN131x, versions with antenna will
be refered to as PAN132x in this document.
For information and features on Bluetooth Low Energy 4.0 refer to Chapter 19,
for information on ANT refer to Chapter 21.
1.1 NEW PAN13X5B, PAN13X6B
The PAN13x5B and PAN13x6B Series are based on Texas Instruments’ NEW
CC2560B and CC2564B controller respectively. The NEW PAN13x5B/13x6B
Series Modules support assisted mode for the HFP1.6 (WBS) profile or the
A2DP profile. The PAN13x6B also supports 10 LE connections (instead of 6
before).
Compatibility:
PAN1315(A/B) and PAN1316(B) are 100% footprint compatible
PAN1325(A/B) and PAN1326(B) are 100% footprint compatible
NOTE: In the following chapters PAN13x5, PAN13x6 naming also considers the
A and B version.
As an updated initialization script resident on the application microcontroller is
required for modules based on the CC2560B and CC2564B, compatibility
between the basic, A and B version is dependent on the Bluetooth stack.
BT-Stack solutions provided by software development partners are available for
most processors, including linux based host systems.
For detailed family overview that includes part numbers see Chapter 28 Ordering
Information.
Contact your stack provider or local Panasonic sales company for currently
available Bluetooth Profiles.
1
Bluetooth is a registered trademark of the Bluetooth Special Interest Group.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
2
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
6 of 61
DATE
28.02..2014
KEY FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bluetooth specification v2.1 + EDR (Enhanced Data Rate)
Surface mount type 6.5(9.5 w. Ant.) x 9.0 x 1.8 mm³
Up to 10 dBm Tx power with transmit power control
High sensitivity (-93 dBm typ.)
Texas Instrument’s CC256X BlueLink 7.0 inside
Fast Connection Setup
Extended SCO Link
Supports convenient direct connection to battery (2.2-4.8 V),
or connect to DC/DC (1.7-1.98 V) for improved power efficiency
Internal crystal oscillator (26MHz)
Fully shielded for immunity
Full Bluetooth data rate up to 2,178kbps asymmetric
Support for Bluetooth power saving modes (Sniff, Hold)
Support for very low-power modes (deep sleep and power down)
Optional support for ultra-low-power mode. Standby with Battery-Backup
PCM Interface Master / Slave supporting 13 or 16 bit linear, 8 bit µ-law or A-law
Codecs and CVSD transcoders on up to 3 SCO channels
Full 8- to 128-bit encryption
UART, I²C and PCM Interface
IO operating voltage = 1.8 V nominal
Bluetooth profiles such as SPP, A2DP and others are available. Refer to
Panasonic’s RF module website for a listing of the most current releases.
Manufactured in conformance with RoHS
2.1 SOFTWARE BLOCK DIAGRAM
Application
Host Processor
BD/EDR
BLE
ANT
HCI
HCI
PAN13xx
L2CAP
RF Block
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
3
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
7 of 61
DATE
28.02..2014
APPLICATIONS FOR THE MODULE
All Embedded Wireless Applications
•
•
•
•
•
•
4
Smart Phones
Industrial Control
Medical
Scanners
Wireless Sensors
Low Power
•
•
•
•
•
•
Cable Replacement
Automotive
Access Points
Consumer Electronics
Monitoring and Control
Access Points
DESCRIPTION FOR THE MODULE
The PAN1315 and PAN1315A are short-range, Class 1 or 2, HCI modules for
implementing Bluetooth functionality into various electronic devices. A block
diagram can be found in Chapter 7.
Communication between the module and the host controller is carried out via
UART.
New designs can be completed quickly by mating the PAN13xx series modules with Texas
Instruments’ MSP430BT5190 that contains Mindtree’s EtherMind Bluetooth Protocol Stack
and serial port profile, additional computing power can be achieved by choosing TI’s
Stellaris ARM7 controller that includes StoneStreet One's A2DP profile. Other BT profiles
are available on custom development basis.
Additional controllers are also supported by the PAN13xx series by using a TI/Panasonic
software development partner to port the Bluetooth stack and profiles. Mindtree's Software
Development Kit (SDK) is available on TI's website -- www.ti.com/connectivity.com
Contact your local sales office for further details on additional options and
services, by visiting www.panasonic.com/rfmodules or write an e-mail to
[email protected].
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
5
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
8 of 61
DATE
28.02..2014
DETAILED DESCRIPTION
5.1 TERMINAL LAYOUT
5.1.1 5.1.1. Terminal Layout PAN131x without antenna
9,00 mm
17
19
6,50 mm
20
15
12
14
16
18
13
21 Pad = 24 x 0.60mm x 0.60mm 11
Module Height 1.8 mm
22
23
2
24
Pin Name
1
2
3
4
5
6
7
GND
TX_DBG
HCI_CTS
HCI_RTS
HCI_RX
HCI_TX
AUD_FSYNC
8
SLOW_CLK_IN
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
NC
MLDO_OUT
CL1.5_LDO_IN
GND
RF
GND
MLDO_IN
nSHUTD
AUD_OUT
AUD_IN
AUD_CLK
GND
NC
VDD_IO
NC
NC
5
3
Pull at
Reset
PU
PU
PU
PU
PU
PD
9
6
4
1
No
10
Top View
Def.
2
Dir.
8
7
I/O Type
Description of Options (Common)
Connect to Ground
Logger output
HCI UART clear-to-send.
HCI UART request-to-send.
HCI UART data receive
HCI UART data transmit
PCM frame synch. (NC if not used)
Fail safe
I
32.768-kHz clock in
Fail safe
IO
O
I
Not connected
Main LDO output (1.8 V nom.)
PA LDO input
Connect to Ground
Bluetooth RF IO
Connect to Ground
Main LDO input
Shutdown input (active low).
PCM data output. (NC if not used)
PCM data input. (NC if not used)
PCM clock. (NC if not used)
Connect to Ground
EEPROM I²C SDA (Internal)
I/O power supply 1.8 V Nom
EEPROM I²C SCL (Internal)
Not connected
O
I
O
I
O
IO
2 mA
8 mA
8 mA
8 mA
8 mA
4 mA
IO
PD
PD
PD
PD
3
I
I
O
I
IO
PI
IO
4 mA
4 mA
HY, 4 mA
4
Fail safe
Fail safe
Fail safe
2
I = input; O = output; IO = bidirectional; P = power; PU = pulled up; PD = pulled down
3
I/O Type: Digital I/O cells. HY = input hysteresis, current = typ. output current
4
No signals are allowed on the IO pins if no VDD_IO (Pin 22) power supplied, except pin 7, 8, 17-19.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
9 of 61
DATE
28.02..2014
5.1.2 5.1.2. Terminal Layout PAN132x with antenna
0,55
C
D
A
B
17
19
20
15
12
14
16
18
13
9.50
1.80
9.00
21 Pad = 28 x 0.60mm x 0.60mm 11
Top View
10
9
23
2
24
1
No
Pin Name
A
B
C
D
GND
GND
GND
GND
6
4
3
Pull at
Reset
5
Def.
5
Dir.
8
0,60
22
7
I/O Type
6
Description of Options (Common)
Connect to Ground
Connect to Ground
Connect to Ground
Connect to Ground
No 1-24 see above in Chapter 5.1.1. Except PIN 13 is not connected. For RF conducted
measurements, either use the PAN1323ETU or de-solder the antenna and solder an
antenna connector to the hot pin.
5
I = input; O = output; IO = bidirectional; P = power; PU = pulled up; PD = pulled down
6
I/O Type: Digital I/O cells. HY = input hysteresis, current = typ. output current
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
10 of 61
DATE
28.02..2014
5.2 PIN DESCRIPTION
Pin Name
No
ESD
(V)
7
Pull
at Def.
8
Reset
Dir.
I/O Type
9
Description of Options
Bluetooth IO SIGNALS
HCI_RX
5
750
PU
I
8 mA
HCI UART data receive
HCI_TX
6
750
PU
O
8 mA
HCI UART data transmit
HCI_RTS
4
750
PU
O
8 mA
HCI UART request-to-send.
HCI_CTS
3
750
PU
I
8 mA
HCI UART clear-to-send.
AUD_FYSNC
AUD_CLK
AUD_IN
AUD_OUT
7
19
18
17
500
500
500
500
PD
PD
PD
PD
IO
IO
I
O
4 mA
HY, 4 mS
4 mA
4 mA
PCM
PCM
PCM
PCM
TX_DBG
2
1000
PU
O
2 mA
CLOCK SIGNALS
SLOW_CLK_IN 8
1000
Bluetooth ANALOG SIGNALS
RF
13
1000
nSHUTD
16
1000
PD
Bluetooth POWER AND GND SIGNALS
VDD_IO
22
1000
frame synch
clock
data input
data output
(NC
(NC
(NC
(NC
if
if
if
if
not
not
not
not
used)
used)
used)
used)
Fail safe
Fail safe
Fail safe
Fail safe
Logger output
OPTION: nTX_DBG – logger out (low = 1)
I
32.768-kHz clock in
Fail safe
IO
I
Bluetooth RF IO (not connected with antenna)
Shutdown input (active low).
PI
I/O power supply 1.8 V Nom
Main
LDO
input
MLDO_IN
15
1000
I
Connect directly to battery or to a pre-regulated 1.8-V supply
Main LDO output (1.8 V nom.) Can not be used as 1.8V supply
MLDO_OUT
10
1000
O
due to internal connection to the RF part.
PA LDO input
CL1.5_LDO_IN 11
1000
I
Connect directly to battery or to a pre-regulated 1.8-V supply
GND
1
P
Connect to Ground
GND
12
P
Connect to Ground
GND
14
P
Connect to Ground
GND
20
P
Connect to Ground
EEPROM IO SIGNALS (EEPROM is optional in PAN13x product line)
NC
23
1000
PU/PD
I
HY, 4mA
EEPROM I²C SCL (Internal)
NC
21
1000
PU/PD
IO
HY, 4mA
EEPROM I²C IRQ (Internal)
Remark:
HCI_CTS is an input signal to the CC256X device:
When HCI_CTS is low, then CC256X is allowed to send data to Host device.
When HCI_CTS is high, then CC256X is not allowed to send data to Host device.
7
ESD: Human Body Model (HBM). JEDEC 22-A114
8
I = input; O = output; IO = bidirectional; P = power; PU = pulled up; PD = pulled down
9
I/O Type: Digital I/O cells. HY = input hysteresis, current = typ output current
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
11 of 61
DATE
28.02..2014
5.3 DEVICE POWER SUPPLY
The PAN13XX Bluetooth radio solution is intended to work in devices with a limited
power budget such as cellular phones, headsets, hand-held PC’s and other batteryoperated devices. One of the main differentiators of the PAN13XX is its power
management – its ability to draw as little current as possible.
The PAN13XX device requires two kinds of power sources:
• Main power supply for the Bluetooth - VDD_IN = VBAT
• Power source for the 1.8 V I/O ring - VDD_IO
The PAN13XX includes several on-chip voltage regulators for increased noise immunity.
The PAN13XX can be connected either directly to the battery or to an external 1.8-V DC
to DC converter.
There are three ways to supply power:
• Full-VBAT system:
Maximum RF output power, but not optimum system power:
• Full-DC2DC system:
Lower RF output power, but optimum system power:
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
12 of 61
DATE
28.02..2014
• Mixed DC2DC-VBAT system:
Maximum RF output power and optimum system power, but requires routing of VBAT:
5.4 CLOCK INPUTS
The slow clock is always supplied from an external source. It is connected to the
SLOW_CLK_IN pin number 8 and can be a digital signal with peak to peak of 0-1.8 V.
The slow clock's frequency accuracy must be 32.768 kHz ±250 ppm for Bluetooth
usage (according to the Bluetooth specification).
The Slow Clock 32.768 kHz is mandatory to start the internal controller,
otherwise the module does not start up.
6
BLUETOOTH FEATURES
•
•
•
•
•
•
•
Support of Bluetooth2.1+EDR (Lisbon Release) up to HCI level.
Very fast AFH algorithm for both ACL and eSCO.
Supports typically 4 dBm Class 2 TX power w/o external PA, improving Bluetooth
link robustness. Adjusting the host settings, the TX power can be increased to 10
dBm. However it is important, that the national regulations and Bluetooth
specification are met.
Digital Radio Processor (DRP) single-ended 50 ohm.
Internal temperature detection and compensation ensures minimal variation in the
RF performance over temperature.
Flexible PCM and I2S digital audio/voice interfaces: Full flexibility of data-format
(Linear, a-Law, µ-Law), data-width, data order, sampling and slot positioning,
master/slave modes, high clock rates up to 15 MHz for slave mode (or 4.096 MHz for
Master Mode). Lost packet concealment for improved audio.
Proprietary low-power scan method for page and inquiry scans, achieves page and
inquiry scans at 1/3rd normal power.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
7
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
13 of 61
DATE
28.02..2014
BLOCK DIAGRAM
Vsupply
Audio PCM / I2S
UART
CC256x
BT-HCI
from TI
Filter
Slow Clock 32.768 kHz
Crystal
26 MHz
Vsupply
Audio PCM / I2S
UART
CC256x
BT-HCI
from TI
PAN131x
Filter
Slow Clock 32.768 kHz
Crystal
26 MHz
PAN132x
Note: The Slow Clock 32.768 kHz is mandatory, otherwise the module does not
start up, refer to Chapter 5.4 for additional information.
Note: The IO are 1.8V driven and might need external level shifter and LDO. The
MLDO_OUT PIN can not be used as reference due to RF internal connection.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
8
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
14 of 61
DATE
28.02..2014
TEST CONDITIONS
Measurements shall be made under room temperature and humidity unless
otherwise specified.
9
GENERAL DEVICE REQUIREMENTS AND OPERATION
Temperature
Humidity
SW-Patch
Supply Voltage
25
40
V2.30
3.3V
±
to
10°C
85%RH
All specifications are over temperature and process, unless indicated otherwise.
9.1 ABSOLUTE MAXIMUM RATINGS
Over operating free-air temperature range (unless otherwise noted).
Note
All parameters are measured as follows unless stated
otherwise:
VDD_IN
No
See
10
= 3.3 V, VDD_IO = 1.8 V.
11
Value
Unit
–0.5 to 5.5
V
–0.5 to 2.145
V
Ratings Over Operating Free-Air Temperature Range
10
11
1
VDD_IN
Supply voltage range
2
VDDIO_1.8V
3
Input voltage to RF (Pin 13)
–0.5 to 2.1
4
Operating ambient temperature range
–40 to 85
5
Storage temperature range
–40 to 125
13
12
V
°C
°C
VDD_IN is supplied to MLDO_IN (Pin 15) and CL1.5_LDO_IN (Pin 11), other options are described in Chapter 5.3.
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
12
Maximum allowed depends on accumulated time at that voltage: VDD_IN is defined in Reference schematics. When DC2DC supply is
used, maximum voltage into MLDO_OUT and LDO_IN = 2.145 V.
13
Older generation parts, which are not recommended for new designs, will support a temperature range -20 to 70. See chapter 28,
ordering information, for details.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
No
See
6
7
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
15 of 61
DATE
28.02..2014
11
Value
Unit
Bluetooth RF inputs (Pin 13)
10
dBm
ESD: Human Body Model (HBM). JEDEC 22-A114
500
V
9.2 RECOMMENDED OPERATING CONDITIONS
No
Symbol
Min
Max
Unit
1
Power supply voltage
14
VDD_IN
1.7
4.8
V
2
IO power supply voltage
VDD_IO
1.62
1.92
V
3
High-level input voltage
Default
VIH
0.65 x VDD_IO
VDD_IO
V
4
Low-level input voltage
Default
VIL
0
0.35 x VDD_IO
V
Tr/Tf
1
10
ns
5
6
Rating
Condition
IO Input rise/fall times, 10% to 90%
15
0 to 0.1 MHz
60
0.1 to 0.5 MHz
50
Maximum ripple on VDD_IN (Sine wave) for
0.5 to 2.5 MHz
1.8 V (DC2DC) mode
2.5 to 3.0 MHz
> 3.0 MHz
7
Voltage dips on VDD_IN (VBAT) (duration =
577
µs
to
2.31 ms, period = 4.6 ms)
8
Maximum ambient operating temperature
9
Minimum ambient operating temperature
16
17
30
mVp-p
15
5
400
mV
85
°C
-40
C
14
Excluding 1.98 < VDD_IN < 2.2 V range – not allowed.
15
Asynchronous mode.
16
The device can be reliably operated for 7 years at Tambient of 85°C, assuming 25% active mode and 75% sleep
mode (15,400 cumulative active power-on hours).
Older generation parts, which are not recommended for new designs, will support a temperature range -20 to
70. See chapter 28, ordering information, for details.
17
The device can be reliably operated for 7 years at Tambient of 85°C, assuming 25% active mode and 75% sleep
mode (15,400 cumulative active power-on hours).
Older generation parts, which are not recommended for new designs, will support a temperature range -20 to
70. See chapter 28, ordering information, for details.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
16 of 61
DATE
28.02..2014
9.3 CURRENT CONSUMPTION
No
1
2
3
4
Characteristics
Current
consumption
in
18
shutdown mode
Current consumption in deep
19
sleep mode
Total IO current consumption
for active mode
Current consumption during
transmit DH5 full throughput
18
Vbat + Vio
19
Vbat + Vio + Vsd (shutdown)
Min
25°C
Typ
25°C
Max
25°C
1
40
Min
-40°C
Max
+85°C
Unit
3
7
µA
105
700
µA
1
mA
1
40
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
Typ
-40°C
Max
-40°C
1
Min
+85°C
Typ
+85°C
mA
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
17 of 61
DATE
28.02..2014
9.4 GENERAL ELECTRICAL CHARACTERISTICS
No
Rating
1
High-level output voltage, VOH
2
Low-level output voltage, VOL
3
IO input impedance
4
Output rise/fall times,10% to 90% (Digital pins)
5
IO
currents
pull
TX_DBG,
PCM bus
All others
Condition
Min
Max
Value
at 2/4/8 mA
0.8 x VDD_IO
VDD_IO
V
at 0.1 mA
VDD_IO – 0.2
VDD_IO
V
at 2/4/8 mA
0
0.2 x VDD_IO
V
at 0.1 mA
0
0.2
V
Resistance
1
MΩ
Capacitance
5
pF
CL = 20 pF
10
Ns
PU
typ = 6.5
3.5
9.7
PD
typ = 27
9.5
55
PU
typ = 100
100
300
PD
typ = 100
100
360
µA
µA
9.5 NSHUTD REQUIREMENTS
No
Parameter
Symbol
20
1
Operation mode level
2
Shutdown mode level
3
Minimum time for nSHUT_DOWN low to reset the device
4
Rise/fall times
Min
Max
Unit
VIH
1.42
1.98
V
VIL
0
0.4
V
5
Tr/Tf
ms
20
µs
9.6 EXTERNAL DIGITAL SLOW CLOCK REQUIREMENTS
No
1
2
3
Condition
Min
Input slow clock frequency
5
Phase noise
at 1 kHz
Jitter
Integrated
15000 Hz
Slow clock
limits
input
8
Input impedance
9
Input capacitance
voltage
Typ
Max
32768
Frequency input duty cycle
7
Symbol
Input slow clock accuracy
Bluetooth
(Initial + temp + aging)
Input transition time Tr/Tf –
10% to 90%
4
6
20
Characteristics
Tr/Tf
15%
over
300
to
50%
Unit
Hz
±250
Ppm
100
Ns
85%
-125
dBc/Hz
1
Hz
VIH
0.65 x
VDD_IO
VDD_IO
VIL
0
0.35 x
VDD_IO
V peak
Square wave, DC coupled
1
MΩ
5
pF
Internal pull down retains shut down mode when no external signal is applied to this pin.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
10
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
18 of 61
DATE
28.02..2014
HOST CONTROLLER INTERFACE
The CC256X incorporates one UART module dedicated to the host controller
interface (HCI) transport layer. The HCI interface transports commands, events,
ACL, and synchronous data between the Bluetooth device and its host using
HCI data packets.
The UART module supports H4 (4-wires) protocol with maximum baud rate of 4
Mbps for all fast clock frequencies.
After power up the baud rate is set for 115.2 kbps, irrespective of fast clock
frequency. The baud rate can thereafter be changed with a vendor specific
command. The CC256X responds with a Command Complete Event (still at
115.2 kbps), after which the baud rate change takes place. HCI hardware
includes the following features:
• Receiver detection of break, idle, framing, FIFO overflow, and parity error
conditions
• Transmitter underflow detection
• CTS/RTS hardware flow control
The interface includes four signals: TXD, RXD, CTS, and RTS. Flow control
between the host and the CC256X is byte-wise by hardware.
Flow control is obtained by the following:
When the UART RX buffer of the CC256X passes the “flow control” threshold, it
will set the UART_RTS signal high to stop transmission from the host.
When the UART_CTS signal is set high, the CC256X will stop its transmission
on the interface. In case HCI_CTS is set high in the middle of transmitting a
byte, the CC256X will finish transmitting the byte and stop the transmission.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
11
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
19 of 61
DATE
28.02..2014
AUDIO/VOICE CODEC INTERFACE
The codec interface is a fully-dedicated programmable serial port that provides the logic
to interface to several kinds of PCM or I2S codec’s. PAN13XX supports all voice coding
schemes required by Bluetooth specification – Log PCM (A-Law or μ-Law) and Linear (CVSD). In
addition, module also supports transparent scheme:
• Two voice channels
• Master / slave modes
• µ-Law, A-Law, Linear, Transparent coding schemes
• Long and short frames
• Different data sizes, order, and positions.
• High rate PCM interface for EDR
• Enlarged interface options to support a wider variety of codecs
• PCM bus sharing
11.1 PCM HARDWARE INTERFACE
The PCM interface is one implementation of the codec interface. It contains the
following four lines:
• Clock—configurable direction (input or output)
• Frame Sync—configurable direction (input or output)
• Data In—Input
• Data Out—Output/3-state
The Bluetooth device can be either the master of the interface where it generates the
clock and the frame-sync signals, or slave where it receives these two signals. The
PCM interface is fully configured by a vendor specific command.
For slave mode, clock input frequencies of up to 16 MHz are supported. At clock rates
above 12 MHz, the maximum data burst size is 32 bits. For master mode, the CC256X
can generate any clock frequency between 64 kHz and 6 MHz.
When the I2S bus is used in an application, Panasonic recommends adding a low pass
filter (series resistor and capacitor to GND) to the bus for better noise suppression.
Connecting the host μController/DSP directly with the module’s I2S interface is not
recommended.
The suggested low pass filter component values are:
470pf
120 ohms
11.2 DATA FORMAT
The data format is fully configurable:
• The data length can be from 8 to 320 bits, in 1-bit increments, when working with two
channels, or up to 640 bits when using 1 channel. The Data length can be set
independently for each channel.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
20 of 61
DATE
28.02..2014
• The data position within a frame is also configurable in with 1 clock (bit) resolution and
can be set independently (relative to the edge of the Frame Sync signal) for each
channel.
• The Data_In and Data_Out bit order can be configured independently. For example;
Data_In can start with the MSB while Data_Out starts with LSB. Each channel is
separately configurable. The inverse bit order (that is, LSB first) is supported only for
sample sizes up to 24 bits.
• It is not necessary for the data in and data out size to be the same length.
• The Data_Out line is configured to ‘high-Z’ output between data words. Data_Out can
also be set for permanent high-Z, irrespective of data out. This allows the CC256X to be
a bus slave in a multi-slave PCM environment. At powerup, Data Out is configured as
high-Z.
11.3 FRAME IDLE PERIOD
The codec interface has the capability for frame idle periods, where the PCM clock can
“take a break” and become ‘0’ at the end of the PCM frame, after all data has been
transferred.
The CC256X supports frame idle periods both as master and slave of the PCM bus.
When CC256X is the master of the interface, the frame idle period is configurable.
There are two configurable parameters:
• Clk_Idle_Start – Indicates the number of PCM clock cycles from the beginning of the
frame until the beginning of the idle period. After Clk_Idle_Start clock cycles, the clock
will become ‘0’.
• Clk_Idle_End – Indicates the time from the beginning of the frame till the end of the
idle period. This time is given in multiples of PCM clock periods.
The delta between Clk_Idle_Start and Clk_Idle_End is the clock idle period.
For example, for PCM clock rate = 1 MHz, frame sync period = 10 kHz, Clk_Idle_Start =
60, Clk_Idle_End = 90.
Between each two frame syncs there are 70 clock cycles (instead of 100). The clock idle
period starts 60 clock cycles after the beginning of the frame, and lasts 90 – 60 = 30
clock cycles. This means that the idle period ends 100 – 90 = 10 clock cycles before the
end of the frame. The data transmission must end prior to the beginning of the idle
period.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
21 of 61
DATE
28.02..2014
11.4 CLOCK-EDGE OPERATION
The codec interface of the CC256X can work on the rising or the falling edge of the
clock. It also has the ability to sample the frame sync and the data at inversed polarity.
This is the operation of a falling-edge-clock type of codec. The codec is the master of
the PCM bus. The frame sync signal is updated (by the codec) on the falling clock edge
and therefore shall be sampled (by the CC256X) on the next rising clock. The data from
the codec is sampled (by the CC256X) on the clock falling edge.
11.5 TWO-CHANNEL PCM BUS EXAMPLE
In below figure, a 2-channel PCM bus is shown where the two channels have different
word sizes and arbitrary positions in the bus frame. (FT stands for Frame Timer)
11.6 AUDIO ENCODING
The CC256X codec interface can use one of four audio-coding patterns:
• A-Law (8-bit)
• µ-Law (8-bit)
• Linear (8- or 16-bit)
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
22 of 61
DATE
28.02..2014
11.7 IMPROVED ALGORITHM FOR LOST PACKETS
The CC256X features an improved algorithm for improving voice quality when received
voice data packets are lost. There are two options:
• Repeat the last sample – possible only for sample sizes up to 24 bits. For sample
sizes >24 bits, the last byte is repeated.
• Repeat a configurable sample of 8 to 24 bits (depends on the real sample size), in
order to simulate silence (or anything else) in the PCM bus. The configured sample will
be written in a specific register for each channel.
The choice between those two options is configurable separately for each channel.
11.8 BLUETOOTH/PCM CLOCK MISMATCH HANDLING
In Bluetooth RX, the CC256X receives RF voice packets and writes these to the codec
I/F. If the CC256X receives data faster than the codec I/F output allows, an overflow will
occur. In this case, the Bluetooth has two possible behaviour modes: ‘allow overflow’
and ‘don’t allow overflow’.
• If overflow is allowed, the Bluetooth will continue receiving data and will overwrite any
data not yet sent to the codec.
• If overflow is not allowed, RF voice packets received when buffer is full will be
discarded.
11.9 BLUETOOTH INTER-IC SOUND (I2S)
The CC256X can be configured as an Inter-IC Sound (I2S) serial interface to an I2S
codec device. In this mode, the CC256X audio codec interface is configured as a bidirectional, full-duplex interface, with two time slots per frame: Time slot 0 is used for the
left channel audio data and time slot 1 for the right channel audio data. Each time slot is
configurable up to 40 serial clock cycles in length and the frame is configurable up to 80
serial clock cycles in length.
Do not connect the the microcontroller/DSP directly to the module's PCM interface, a
simple RC low pass filter is recommended to improve noise suppression.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
11.10
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
23 of 61
DATE
28.02..2014
CURRENT CONSUMPTION FOR DIFFERENT BLUETOOTH SCENARIOS
The following table gives average current consumption for different Bluetooth scenarios.
Conditions: VDD_IN = 3.6 V, 25°C, 26-MHz fast clock, nominal unit, 4 dBm output
power.
12
BLUETOOTH RF PERFORMANCE
No
Characteristics
1
Average Power Hopping DH5 [dBm]
22, 23
22, 23
2
Average Power: Ch0 [dBm]
3
Peak Power: Ch0 [dBm]
4
Average Power: Ch39 [dBm]
22, 23
22, 23
22, 23
5
Peak Power: Ch39 [dBm]
6
Average Power: Ch78 [dBm]
22, 23
22, 23
Typ
BT Spec BT Spec
Max
Min
Class1
Class1
7.2
20
4
7.5
20
4
7.7
23
7.0
20
7.2
23
6.7
20
4
4
7
Peak Power: Ch78 [dBm]
7.0
23
8
Max. Frequency Tolerance: Ch0 [kHz]
-2.6
75
-75
9
Max. Frequency Tolerance: Ch39 [kHz]
-2.2
75
-75
10
Max. Frequency Tolerance: Ch78 [kHz]
-2.1
75
-75
11
Max. Drift: Ch0_DH1 [kHz]
3.6
25
-25
12
Max. Drift: Ch0_DH3 [kHz]
3.7
40
-40
13
Max. Drift: Ch0_DH5 [kHz]
4.0
40
-40
14
Max. Drift Rate: Ch0_DH1 [kHz]
-2.6
20
-20
15
Max. Drift Rate: Ch0_DH3 [kHz]
-3.2
20
-20
16
Max. Drift Rate: Ch0_DH5 [kHz]
-3.3
20
-20
17
Max. Drift: Ch39_DH1 [kHz]
4.0
25
-25
18
Max. Drift: Ch39_DH3 [kHz]
4.3
40
-40
19
Max. Drift: Ch39_DH5 [kHz]
4.3
40
-40
20
Max. Drift Rate: Ch39_DH1 [kHz]
-3.1
20
-20
21
Max. Drift Rate: Ch39_DH3 [kHz]
-3.6
20
-20
22
Max. Drift Rate: Ch39_DH5 [kHz]
-3.7
20
-20
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
PAGE
24 of 61
DATE
28.02..2014
No
Characteristics
Typ
BT Spec BT Spec
Max
Min
Class1
Class1
23
Max. Drift: Ch78_DH1 [kHz]
4.1
25
-25
24
Max. Drift: Ch78_DH3 [kHz]
4.5
40
-40
25
Max. Drift: Ch78_DH5 [kHz]
4.4
40
-40
26
Max. Drift Rate: Ch78_DH1 [kHz]
-3.4
20
-20
27
Max. Drift Rate: Ch78_DH3 [kHz]
-3.9
20
-20
28
Max. Drift Rate: Ch78_DH5 [kHz]
-4.1
20
-20
29
Delta F1 Avg: Ch0 [kHz]
159.5
175
140
30
Delta F2 Max.: Ch0 [%]
100.0
31
Delta F2 Avg/Delta F1 Avg: Ch0
0.9
32
Delta F1 Avg: Ch39 [kHz]
159.8
33
Delta F2 Max.: Ch39 [%]
100.0
34
Delta F2 Avg/Delta F1 Avg: Ch39
0.9
35
Delta F1 Avg: Ch78 [kHz]
159.1
36
Delta F2 Max.: Ch78 [%]
100.0
99.9
37
Delta F2 Avg/Delta F1 Avg: Ch78
0.9
0.8
45
Sensitivity
-93.0
-81
46
f(H)-f(L): Ch0 [kHz]
918.4
1000
47
f(H)-f(L): Ch39 [kHz]
918.3
1000
48
f(H)-f(L): Ch78 [kHz]
918.2
1000
49
ACPower -3: Ch3 [dBm]
-51.5
-40
50
ACPower -2: Ch3 [dBm]
-50.4
-40
51
ACPower -1: Ch3 [dBm]
-18.5
52
ACPower Center: Ch3 [dBm]
8.1
53
ACPower +1: Ch3 [dBm]
-19.2
54
ACPower +2: Ch3 [dBm]
-50.7
-40
55
ACPower +3: Ch3 [dBm]
-53.3
-40
56
ACPower -3: Ch39 [dBm]
-51.6
-40
57
ACPower -2: Ch39 [dBm]
-50.7
-40
58
ACPower -1: Ch39 [dBm]
-19.0
59
ACPower Center: Ch39 [dBm]
7.7
60
ACPower +1: Ch39 [dBm]
-19.7
61
ACPower +2: Ch39 [dBm]
-50.9
-40
62
ACPower +3: Ch39 [dBm]
-53.2
-40
63
ACPower -3: Ch75 [dBm]
-51.7
-40
64
ACPower -2: Ch75 [dBm]
-50.7
-40
65
ACPower -1: Ch75 [dBm]
-19.2
66
ACPower Center: Ch75 [dBm]
7.5
67
ACPower +1: Ch75 [dBm]
-20.0
68
ACPower +2: Ch75 [dBm]
-51.0
-40
69
ACPower +3: Ch75 [dBm]
-53.4
-40
70
omega i 2-DH5: Ch0 [kHz]
-4.7
75
-75
71
omega o + omega i 2-DH5: Ch0 [kHz]
-6.0
75
-75
72
omega o 2-DH5: Ch0 [kHz]
-1.5
10
-10
73
DEVM RMS 2-DH5: Ch0 [%]
0.0
0.2
74
DEVM Peak 2-DH5: Ch0 [%]
0.1
0.35
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
REV.
4.20
99.9
0.8
175
140
99.9
0.8
175
20
20
20
140
4
4
4
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
PAGE
25 of 61
DATE
28.02..2014
BT Spec BT Spec
Max
Min
Class1
Class1
No
Characteristics
Typ
75
DEVM 99% 2-DH5: Ch0 [%]
100.0
76
omega i 3-DH5: Ch0 [kHz]
-3.7
75
-75
77
omega o + omega i 3-DH5: Ch0 [kHz]
-5.8
75
-75
78
omega o 3-DH5: Ch0 [kHz]
-2.6
10
-10
79
DEVM RMS 3-DH5: Ch0 [%]
0.0
0.13
80
DEVM Peak 3-DH5: Ch0 [%]
0.1
0.25
81
DEVM 99% 3-DH5: Ch0 [%]
100.0
82
omega i 2-DH5: Ch39 [kHz]
-4.8
75
-75
83
omega o + omega i 2-DH5: Ch39 [kHz]
-6.1
75
-75
84
omega o 2-DH5: Ch39 [kHz]
-1.4
10
-10
85
DEVM RMS 2-DH5: Ch39 [%]
0.0
0.2
86
DEVM Peak 2-DH5: Ch39 [%]
0.1
0.35
87
DEVM 99% 2-DH5: Ch39 [%]
100.0
88
omega i 3-DH5: Ch39 [kHz]
-3.8
75
-75
89
omega o + omega i 3-DH5: Ch39 [kHz]
-5.9
75
-75
90
omega o 3-DH5: Ch39 [kHz]
-2.6
10
-10
91
DEVM RMS 3-DH5: Ch39 [%]
0.0
0.13
92
DEVM Peak 3-DH5: Ch39 [%]
0.1
0.25
93
DEVM 99% 3-DH5: Ch39 [%]
100.0
94
omega i 2-DH5: Ch78 [kHz]
-4.9
75
-75
95
omega o + omega i 2-DH5: Ch78 [kHz]
-6.2
75
-75
96
omega o 2-DH5: Ch78 [kHz]
-1.4
10
-10
97
DEVM RMS 2-DH5: Ch78 [%]
0.0
0.2
98
DEVM Peak 2-DH5: Ch78 [%]
0.1
0.35
99
DEVM 99% 2-DH5: Ch78 [%]
100.0
100
omega i 3-DH5: Ch78 [kHz]
-3.8
75
-75
101
omega o + omega i 3-DH5: Ch78 [kHz]
-6.0
75
-75
102
omega o 3-DH5: Ch78 [kHz]
-2.7
10
-10
103
DEVM RMS 3-DH5: Ch78 [%]
0.0
0.13
104
DEVM Peak 3-DH5: Ch78 [%]
0.1
0.25
105
DEVM 99% 3-DH5: Ch78 [%]
100.0
99
99
99
99
99
Characteristics
1
Operation frequency range
2
Channel spacing
1
3
Input impedance
50
Sensitivity, Dirty Tx on
Min
99
No
4
Condition
Typ
2402
Max
BT Spec
2480
Unit
MHz
MHz
Ω
GFSK, BER = 0.1%
-93.0
-70
Pi/4-DQPSK, BER = 0.01%
-92.5
-70
8DPSK, BER = 0.01%
-85.5
-70
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
REV.
4.20
dBm
www.pideu.panasonic.de
CLASSIFICATION
PRODUCT SPECIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
No
1
2
3
PANASONIC’S CODE
See Chapter 28. Ordering Information
Characteristics
No.
DS-13xx-2400-102
PAGE
26 of 61
DATE
28.02..2014
Condition
Typ
21 22 23
Max
Unit
Tx and Rx out-of-band emissions
Output signal = 7dBm
30 kHz to 1 GHz
2nd harmonic
at 7dBm output power
21, 22, 23
-30
dBm
at 7dBm output power
21, 22, 23
-30
dBm
3rd harmonic
1 to 12.75 GHz
,
REV.
4.20
,
-30
21, 22, 23
-30
dBm
The values are measured conducted. Better suppression of the spurious emissions with
an antenna can be expected as, antenna frequently have band pass filter
characteristics.
13 SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING)
13.1 FOR LEAD SOLDER
10 ±1s
Recommended temp. profile
for reflow soldering
30 +20/-10s
Temp.[°C]
235°C max.
220 ±5°C
200°C
150 ±10°C
90 ±30s
Time [s]
21
Includes effects of frequency hopping
22
Average according FCC, IC and ETSI requirements. Above +7dBm output power (refer also to 23) the
customer has to verify the final product against national regulations.
23
+7dBm related to power register value 18, according to TI service pack 2.30
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
27 of 61
DATE
28.02..2014
13.2 FOR LEADFREE SOLDER
Our used temp. profile
for reflow soldering
30 +20/-10s
Temp.[°C]
230°C -250°C max.
220°C
150°C – 190°C
90 ±30s
Time [s]
Reflow permissible cycle:
2
Opposite side reflow is prohibited due to module weight.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
14
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
28 of 61
DATE
28.02..2014
MODULE DIMENSION
14.1 MODULE DIMENSIONS PAN131X WITHOUT ANTENNA
No.
Item
Dimension
Tolerance
1
Width
6.50
± 0.20
2
Lenght
9.00
± 0.20
3
Height
1.80
± 0.20
Remark
With case
PAN131X Module Drawing
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
29 of 61
DATE
28.02..2014
14.2 MODULE DIMENSIONS PAN132X WITH ANTENNA
No.
Item
Dimension
Tolerance
1
Width
9.50
± 0.20
2
Lenght
9.00
± 0.20
3
Height
1.80
± 0.20
Remark
With case
PAN132X Module Drawing
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
15
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
30 of 61
DATE
28.02..2014
FOOTPRINT OF THE MODULE
15.1 FOOTPRINT PAN131X WITHOUT ANTENNA
All
dimensions
are
The outer dimensions have a tolerance of ± 0.2mm.
in
millimeters.
The layout is symetric to center. The inner pins (2,4,6,9,11,14,16,18,21,23) are
shifted to the center by 1mm.
3.95
2.95
1.80
0.90
20
18
15
13
12
14
16
6,50
21 Pad = 24 x 0.60mm x 0.60mm 11
Top View
22
10
9
23
2
24
1
0.90
1.70
1.80
2.70
17
19
6
4
5
3
8
7
9,00
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
31 of 61
DATE
28.02..2014
15.2 FOOTPRINT PAN132X WITH ANTENNA
All
dimensions
are
The outer dimensions have a tolerance of ± 0.2mm.
in
millimeters.
The layout is symetric to center. The inner pins (2,4,6,9,11,14,16,18,21,23) are
shifted to the center by 1mm.
C
D
A
B
9.50
19
20
17
15
16
18
13
12
14
21 Pad = 28 x 0.60mm x 0.60mm 11
Top View
22
10
23
0.55
1.00
9
4
2
24
1
0.90
1.70
1.80
2.70
1.80
1.80
3.95
2.95
2.70
1.80
0.90
3
6
5
8
7
9,00
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
16
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
32 of 61
DATE
28.02..2014
LABELING DRAWING
PAN1315 01/01
ENW89818C2xF
YYWWDLL
FCC ID: T7V1315
Machine
readable
2D-Barcode
The above pictures show the laser marking on the top case, this is only an example
from PAN1315.
17
MECHANICAL REQUIREMENTS
No.
1
2
Item
Limit
Condition
More than 75% of the soldering area shall be Reflow
soldering
with
Solderability
coated by solder
recommendable temperature profile
Resistance to soldering It shall be satisfied electrical requirements and not
See Chapter 13.2
heat
be mechanical damage
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
18
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
33 of 61
DATE
28.02..2014
RECOMMENDED FOOT PATTERN
18.1 RECOMMENDED FOOT PATTERN PAN131X WITHOUT ANTENNA
Dimensions in mm.
9,00
19
20
16
18
13
15
17
12
14
Top View
22
10
23
9
4
2
24
1
6,50
6,00
21 Pad = 24 x 0.60mm x 0.60mm 11
3
6
5
8
7
8,50
The land pattern dimensions above are meant to serve only as a guide. This
information is provided without any legal liability.
For the solder paste screen, use as a first guideline the same foot print as shown
in the figure above. Solder paste screen cutouts (with slightly different
dimensions) might be optimum depending on your soldering process. For
example, the solder paste screen thickness chosen might have an effect. The
solder screen thickness depends on your production standard 120µm to 150µm
is recommended.
IMPORTANT:
Although the bottom side of PAN131X is fully coated, no copper such as through
hole vias, planes or tracks on the board component layer should be located
below the PAN131X to avoid creating a short. In cases where a track or through
hole via has to be located under the module, it must be kept away from
PAN131X bottom pads. The PAN131X multilayer pcb contains an inner RF
shielding plane, therefore no pcb shielding plane below the module is needed.
When using an onboard ceramic antenna, place the antenna on the edge of your
carrier board (if allowable).
If you have any questions on these points, contact your local Panasonic
representative.
Schematics and layouts may be sent to [email protected] for final
review.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
34 of 61
DATE
28.02..2014
18.2 RECOMMENDED FOOT PATTERN PAN132X WITH ANTENNA
Dimensions in mm.
0,55
C
D
A
B
17
19
20
15
12
14
16
18
13
9.50
1.80
9.00
21 Pad = 28 x 0.60mm x 0.60mm 11
Top View
10
9
23
2
24
1
6
4
3
5
8
0,60
22
7
The land pattern dimensions above are meant to serve only as a guide.
For the solder paste screen, use as a first guideline the same foot print as shown
in the Figure above. Solder paste screen cutouts (with slightly different
dimensions) might be optimum depending on your soldering process. For
example, the solder paste screen thickness chosen might have an effect. The
solder screen thickness depends on your production standard 120μm to 150μm
is recommended.
IMPORTANT: In cases where a track or through hole via has to be located under
the module, it must be kept away from PAN132X bottom pads. The PAN132X
multilayer pcb contains an inner RF shielding plane, therefore no pcb shielding
plane below the module is needed.
If you have any questions on these points, contact your local Panasonic
representative.
Schematics and layouts may be sent to [email protected] for final
review.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
19
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
35 of 61
DATE
28.02..2014
RADIATION PATTERN
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
36 of 61
DATE
28.02..2014
20
LAYOUT RECOMMENDATIONS WITH ANTENNA (PAN132X)
21
BLUETOOTH LE (LOW ENERGY) PAN1316/26
21.1 NETWORK TOPOLOGY
Bluetooth Low Energy is designed to reduce power consumption. It can be put into a sleep
mode and is only activated for event activities such as sending files to a gateway, PC or
mobile phone. Furthermore the maximum power consumption is set to less than 15 mA
and the average power consumption is about 1 uA. The benefit of low energy consumption
are short messages and establishing very fast connections (few ms). Using these
techniques, energy consumption is reduced to a tenth of a Classic Bluetooth unit. Thus, a
small coin cell – such as a CR2032 – is capable of powering a device for up to 10 years of
operation.
To be backwards compatible with Classic Bluetooth and to be able to offer an affordable
solution for very inexpensive devices, Panasonic Low Energy Bluetooth modules are
offered in two versions:
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
37 of 61
DATE
28.02..2014
Dual-mode: Bluetooth Low Energy technology combined with Classic Bluetooth
functionality on a single module. Dual mode devices act as gateways between these two
technologies.
Single Mode: Bluetooth Low Energy technology to optimize power consumption, which is
particularly useful for products powered by small batteries. These modules have
embedded controllers allowing the module to operate autonomously in low cost
applications that lack intelligence.
This data sheet describes dual-mode Bluetooth Low Energy technology
combined with Classic Bluetooth functionality on a single module. Additional
information on Panasonic’s single mode products can be found by visiting
www.panasonic.com/rfmodules
or
write
an
e-mail
to
[email protected].
21.2 MODULE FEATURES
Fully compliant with Bluetooth 4.0:
•
•
•
•
•
Optimized for proximity and sports use
Supports up to 10 simultaneous connections
Multiple sniff instances are tightly coupled to minimize power consumption
Independent buffering allows a large number of multiple connections without
affecting BR/EDR performance
Includes built-in coexistence and prioritization handling for BR/EDR and LE
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
38 of 61
DATE
28.02..2014
21.3 CURRENT CONSUMPTION FOR DIFFERENT LE SCENARIOS
Conditions: VDD_IN = 3.6 V, 25°C, 26-MHz fast clock, nominal unit, 10 dBm output power
Mode
Description
Advertising, non-connectable
Advertising, discoverable
Scanning
Connected
(master role)
22
Advertising in all 3 channels
1.28msec advertising interval
15Bytes advertise Data
Advertising in all 3 channels
1.28msec advertising interval
15Bytes advertise Data
Listening to a single frequency per window
1.28msec scan interval
11.25msec scan window
500msec connection interval
0msec Slave connection latency
Empty Tx/Rx LL packets
Average Current
Unit
104
µA
121
µA
302
µA
169
µA
ANT PAN1317/27
ANT+ (sometimes ANT + or ANT Plus) is an interoperability function that can be
added to the base ANT protocol (a proprietary wireless sensor network
technology).[
22.1 NETWORK TOPOLOGY
ANT™ is a wireless sensor network protocol operating in the 2.4 GHz spectrum. Designed
for ultra-low power, ease of use, efficiency and scalability, ANT supports peer-to-peer, star,
tree and fixed mesh topologies. It provides reliable data communications, flexible and
adaptive network operation and cross-talk immunity. The ANT protocol stack is compact,
requiring minimal microcontroller resources to reduce system costs, lighten the
computational burden and improve efficiency. Low-level security is implemented to allow
user-defined network security.
PAN1317/1327 provides the first wireless, single-chip solution with dual-mode ANT and
Bluetooth connectivity with inclusion of TI’s CC2564 device. This solution wirelessly
connects 13 million ANT-based devices to the more than 3 billion Bluetooth endpoint
devices used by people every day, creating new market opportunities for companies
building ANT products and Bluetooth products alike. CC2564 requires 80% less board area
than a design with two single-mode solutions (one ANT+, one Bluetooth) and increases the
wireless transmission range up to two times the distance of a single-mode ANT+ solution.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
39 of 61
DATE
28.02..2014
22.2 MODULE FEATURES
Fully compliant with ANT protocol:
• ANT solution optimized for fitness, health and consumers use cases
• Supports up to eight simultaneous connections, various network topologies and highresolution proximity pairing
• Includes built-in coexistence and prioritization handling for BR/EDR and ANT
Features
Benefits
Dual-mode ANT+ and Bluetooth (Bluetooth v2.1 +
EDR) on a single chip
- Requires 80% less board area than any dual module or device
design
Reduces costs associated with incorporating two wireless
technologies
Fully validated optimized single antenna solution
- Enables simultaneous operation of ANT+ and Bluetooth without
the need for two devices or modules
- Includes built-in coexistence
Best-in-class Bluetooth and ANT RF performance:
- +10 dBm Tx power with transmit power control
- -93 dBm sensitivity
- Delivers twice the distance between the aggregator and ANT
sensor device than competitive single-mode ANT solutions
- Enables a robust and high-throughput connection with extended
range
Support for:
- ANT+ ultra low power (master and slave devices)
- Bluetooth power saving modes (park, sniff, hold)
- Bluetooth ultra low power modes (deep sleep,
power down)
- Improves battery life and power efficiency of the finished product
Turnkey solution:
- Fully integrated module
- Complete development kit with software and
documentation
- TI MSP430 hardware and software platform
integration (optional)
- Ease of integration into system allows quick time to market
- Reduces costs and time associated with certification
22.3 ANT CURRENT CONSUMPTION
Mode
Description
Average Current
Unit
Rx message mode
250msec interval
380
µA
Rx message mode
500msec interval
205
µA
Rx message mode
1000msec interval
118
µA
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
23
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
40 of 61
DATE
28.02..2014
TRIPLE MODE (BR/EDR + BLUETOOTH LOW ENERGY OR ANT) PAN1323
The PAN1323 has been engineered to give designers the flexibility to implement
Bluetooth Classic (BR/EDR), Bluetooth Low Energy or ANT into an application
using a single module, reducing cost and footprint area. Refer to the paragraphs
above for complete descriptions on each of the three protocols. The module is
fully hardware compatible with the PAN1315, 16, 17, 25, 26 and 27. A highly
efficent single RF block serves all three protocols. Protocols access the RF block
using time division multiplexing. The application layer determines the priority and
timing of the RF block. Customers interested in this unique module are
encouraged to contact StoneStreetOne for a Bluetooth SIG certified stack. Note
ANT and BLE can not be used simultaniously.
23.1 TRIPLE MODE CURRENT CONSUMPTION
The current consumption of the PAN1323 is a function of the protocol that the
module is running at any point in time. Refer to the paragraphs above for details
on current consumption for each of the three protocols or software vendor.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
24
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
41 of 61
DATE
28.02..2014
DEVELOPMENT OF APPLICATIONS
Mindtree Ltd. has developed a Bluetooth SPP freeware for TIs MSP430 and
Panasonics PAN1315 and PAN1325. For other software refer to Chapter 24 or
visit the following link www.panasonic.com/rfmodules.
24.1 TOOLS TO BE NEEDED
Tool
Source
TI - MSP-EXP430F5438 - Experimenter Board
MSP-EXP430F5438
MSP-FET430UIF430
TI PAN1323EMK
Panasonic PAN1323ETU
TI - MSP-FET430UIF430 - Debugging Interface
PAN1323EMK - Bluetooth Evaluation Module Kit for MSP430
PAN1323ETU
In addition you need the software development environment, e.g. IAR Embedded
Workbench, refer to:
http://processors.wiki.ti.com/index.php/CC256x_Bluetooth
http://processors.wiki.ti.com/index.php/IAR_Embedded_Workbench_for_TI_MSP430
Evaluation kits and modules are available through Panasonic’s network of authorized
distributors. For any additional information, please visit www.panasonic.com/rfmodules.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
25
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
42 of 61
DATE
28.02..2014
LIST OF PROFILES
Profile
Software Developer
Controller
Availability
MindTree
Seeran
Stollmann
StoneStreetOne
ARS
TI, MSP430
STM32, MSP430
TI, MSP430
TI, Stellaris
Multiple
Now
Now
Now
Now
Now
Bluetooth
SPP and others
SPP
HDP, SPP
A2DP, AVRCP, SPP
SPP and others
Bluetooth LE
All
ARS,
MindTree,
TI, MSP430 and others
StoneStreetOne, Stollmann
Upon request
Dynastream
MSP430 and others
Now
StoneStreetOne
MSP430 and others
Now
ANT Protocoll
ANT
Triple Mode Stack
SPP
For all other profiles contact your local sales representative.
26
RELIABILITY TESTS
The measurement should be done after being exposed to room temperature and
humidity for 1 hour.
No.
Condition
Item
Limit
1
Vibration test
a) Freq.:10~50Hz,Amplitude:1.5mm
Electrical parameter should be in a) 20min. / cycle,1hrs. each of XYZ axis
specification
b) Freq.:30~100Hz, 6G
b) 20min. / cycle,1hrs. each of XYZ axis
2
Shock test
the same as above
Dropped onto hard wood from height of 50cm for 3 times
3
Heat cycle test
the same as above
-40°C for 30min. and +85°C for 30min.;
each temperature 300 cycles
4
Moisture test
the same as above
+60°C, 90% RH, 300h
5
Low temp. test
the same as above
-40°C, 300h
6
High temp. test
the same as above
+85°C, 300h
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
27
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
43 of 61
DATE
28.02..2014
CAUTIONS
Failure to follow the guidelines set forth in this document may result in degrading
of the product’s functions and damage to the product.
27.1 DESIGN NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Follow the conditions written in this specification, especially the control
signals of this module.
The supply voltage has to be free of AC ripple voltage (for example from a
battery or a low noise regulator output). For noisy supply voltages, provide a
decoupling circuit (for example a ferrite in series connection and a bypass
capacitor to ground of at least 47uF directly at the module).
This product should not be mechanically stressed when installed.
Keep this product away from heat. Heat is the major cause of decreasing the
life of these products.
Avoid assembly and use of the target equipment in conditions where the
products' temperature may exceed the maximum tolerance.
The supply voltage should not be exceedingly high or reversed. It should not
carry noise and/or spikes.
Keep this product away from other high frequency circuits.
27.2 INSTALLATION NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Reflow soldering is possible twice based on the conditions in Chapter 15.
Set up the temperature at the soldering portion of this product according to
this reflow profile.
Carefully position the products so that their heat will not burn into printed
circuit boards or affect the other components that are susceptible to heat.
Carefully locate these products so that their temperatures will not increase
due to the effects of heat generated by neighboring components.
If a vinyl-covered wire comes into contact with the products, then the cover
will melt and generate toxic gas, damaging the insulation. Never allow contact
between the cover and these products to occur.
This product should not be mechanically stressed or vibrated when reflowed.
To repair a board by hand soldering, keep the conditions of this chapter.
Do not wash this product.
Refer to the recommended pattern when designing a board.
Pressing on parts of the metal cover or fastening objects to the metal will
cause damage to the unit.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
44 of 61
DATE
28.02..2014
27.3 USAGE CONDITIONS NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Take measures to protect the unit against static electricity.
If pulses or other transient loads (a large load applied in a short time) are
applied to the products, check and evaluate their operation befor assembly
on the final products.
Do not use dropped products.
Do not touch, damage or soil the pins.
Follow the recommended condition ratings about the power supply applied to
this product.
Electrode peeling strength: Do not add pressure of more than 4.9N when
soldered on PCB.
Pressing on parts of the metal cover or fastening objects to the metal cover
will cause damage.
These products are intended for general purpose and standard use in general
electronic equipment, such as home appliances, office equipment,
information and communication equipment.
27.4 STORAGE NOTES
(1)
(2)
(3)
(4)
(5)
The module should not be stressed mechanically during storage.
Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely
affected:
• Storage in salty air or in an environment with a high concentration of
corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX
• Storage in direct sunlight
• Storage in an environment where the temperature may be outside the range
of 5°C to 35°C range, or where the humidity may be outside the 45 to 85%
range.
• Storage of the products for more than one year after the date of delivery
Storage period: check the adhesive strength of the embossed tape and
soldering after 6 months of storage.
Keep this product away from water, poisonous gas and corrosive gas.
This product should not be stressed or shocked when transported.
Follow the specification when stacking packed crates (max. 10).
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
45 of 61
DATE
28.02..2014
27.5 SAFETY CAUTIONS
These specifications are intended to preserve the quality assurance of products and
individual components.
Before use, check and evaluate the operation when mounted on your products. Abide
by these specifications, without deviation when using the products. These products may
short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are
anticipated when a short circuit occurs, then provide the following failsafe functions, as a
minimum.
(1)
(2)
Ensure the safety of the whole system by installing a protection circuit and a
protection device.
Ensure the safety of the whole system by installing a redundant circuit or
another system to prevent a single fault causing an unsafe status.
27.6 OTHER CAUTIONS
(1)
(2)
(3)
(4)
(5)
(6)
(7)
This specification sheet is copyrighted.
Do not use the products for other purposes than those listed.
Be sure to provide an appropriate fail-safe function on your product to prevent
an additional damage that may be caused by the abnormal function or the
failure of the product.
This product has been manufactured without any ozone chemical controlled
under the Montreal Protocol.
These products are not intended for other uses, other than under the special
conditions shown below. Before using these products under such special
conditions, check their performance and reliability under the said special
conditions carefully to determine whether or not they can be used in such a
manner.
• In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places
where liquid may splash.
• In direct sunlight, outdoors, or in a dusty environment
• In an environment where condensation occurs.
• In an environment with a high concentration of harmful gas (e.g. salty air,
HCl, Cl2, SO2, H2S, NH3, and NOX)
If an abnormal voltage is applied due to a problem occurring in other
components or circuits, replace these products with new products because
they may not be able to provide normal performance even if their electronic
characteristics and appearances appear satisfactory.
When you have any question or uncertainty, contact Panasonic.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
28
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
46 of 61
DATE
28.02..2014
PACKAGING
28.1 PACKAGING OF PAN131X WITHOUT ANTENNA
Tape Dimension
Y
X
X
Y
SECTION
SCALE 3.5
Y-Y
:1
SECTION
SCALE 3.5
X-X
:1
o
A
o
B
Ko
K1
F
P1
W
6.90
9.40
2.80
2.00
7.50
12.00
16.00
+/- 0.10
+/- 0.10
+/- 0.10
+/- 0.10
+/- 0.10
+/- 0.10
+/- 0.30
(I)
(II)
(III)
(IV)
Forming format : Flatbed - 9
Estimated max. length : 72 meter/22B3 reel
to centreline of pocket.
Cumulative tolerance of 10 sprocket
holes is ± 0.20 .
Measured from centreline of sprocket
hole to centreline of pocket.
Other material available.
ALL DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE STATED.
Packing in Tape
trailer (empty)
1 x circumference /
hub
(min 160mm)
Machine
readable
2D-Barcode
PAN1315 01/01
ENW89809M5A
YYWWDLL
FCC ID: T7V1315
PAN1315 01/01
ENW89809M5A
YYWWDLL
FCC ID: T7V1315
Machine
readable
2D-Barcode
Direction of unreeling (for customer)
component
packed area
standard
1500pcs
leader (empty)
minimum 10 pitch
Top cover tape more
than 1 x
circumference plus
100mm to avoid
fixing of tape end on
sealed modules.
Empty spaces in component packed area shall be less than two per reel and those
spaces shall not be consecutive.
Top cover tape shall not be found on reel holes and shall not stick out from reel.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
47 of 61
DATE
28.02..2014
Component direction
Machine
readable
2D-Barcode
Pin 1 Marking
(Top Side)
Pin 1 Marking
(Bottom Side)
Circle r = 0.5 mm
on solder resist
near Pin 1
PAN1315 01/01
ENW89809M5A
YYWWDLL
FCC ID: T7V1315
Direction of
unreeling
(for customer)
Reel dimension
TAPE SIZE
A
MAX
B
MIN
24mm
330.0
1.5
All dimensions in millimeters unless otherwise stated
C
13 +0.5
-0.2
D
MIN
±1.0
N
20.2
100.0
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
W1
25.0 +2.0
-0.0
W2
MAX
30.4
W3
24.4 +3.0
-0.5
Assembly
Method
*Latch
*Latch (2PC)
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
48 of 61
DATE
28.02..2014
Label for Package
105 mm
51 mm
PAN1315
ENW89818C2JF
Customer Code
(1T)
(1P)
(2P)
(9D)
(Q)
(HW/SW)
Lotcode [YYWWDLL]
Example from above:
YY
year
printed 08
WW normal calendar week
printed 01
D
day
printed 5 (Friday)
L
line identifier, if more as one
printed 1
printed 1
L
lot identifier per day
Customer Order Code, if any, otherwise company name will be printed
Panasonic Order Code refer to chapter 28 Ordering Information
Datecode as [YYWW]
Quantity [XXXX], variable max. 1500
Hardware /Software Release
Total Package
moisture-sensitive print
(already exist on barrier bag)
barcode
label
barrier bag
sealed
desiccant 1) 2)
moisture indicator
barcode
label
1) quantity of desiccant according
to calculation
2) optional: desiccant placed into
the corner of the barrier bag
inner carton box
size 340 x 340 x 41 mm³
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
49 of 61
DATE
28.02..2014
28.2 PACKAGING FOR PAN132X WITH ANTENNA
Tape Dimension
Y
X
X
Y
SECTION YSCALE 3.5 :
Y
1
SECTION XSCALE 3.5 :
X
1
Ao
Bo
Ko
K1
F
P1
W
9.90
9.40
2.80
2.00
7.50
12.00
16.00
+/- 0.10
+/- 0.10
+/- 0.10
+/- 0.10
+/- 0.10
+/- 0.10
+/- 0.30
(I)
(II)
(III)
(IV)
Tooling code: Flatbed - 9
Estimated Max Length: 72m per 22B3
Measured from centreline of sprocket hole
to centreline of pocket.
Cumulative tolerance of 10 sprocket
holes is ± 0.20 .
Measured from centreline of sprocket
hole to centreline of pocket.
Other material available.
ALL DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE STATED.
Packing in Tape
Direction of unreeling (for customer)
trailer (empty)
1 x circumference /hub
(min 160mm)
component
packed area
standard
1500pcs
leader (empty)
minimum 10 pitch
Pin1 Marking
Top cover tape more
than 1 x
circumference plus
100mm to avoid
fixing of tape end on
sealed modules.
All other packaging information is similar to Chapter 27.1
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
29
No.
DS-13xx-2400-102
PRODUCT SPECIFICATION
PANASONIC’S CODE
See Chapter 28. Ordering Information
REV.
4.20
PAGE
50 of 61
DATE
28.02..2014
ORDERING INFORMATION
Model
Temp.
Part Number
TI-Device
Remark
PAN1315A
-20°C to +70°C
ENW89829C2JF
CC2560A
NR for new designs
PAN1315A
-40°C to +85°C
ENW89829C2KF
CC2560A
NR for new designs
PAN1315B
-40°C to +85°C
ENW89829C3KF
CC2560B
Recommended for new designs
PAN1316
-20°C to +70°C
ENW89823C2JF
CC2564
NR for new designs
PAN1316
-40°C to +85°C
ENW89823C2KF
CC2564
NR for new designs
PAN1316B
-40°C to +85°C
ENW89823C3KF
CC2564B
Recommended for new designs
PAN1317
-20°C to +70°C
ENW89827C2JF
CC2564
NR for new designs
PAN1317
-40°C to +85°C
ENW89827C2KF
CC2564
NR for new designs
PAN1323
-20°C to +70°C
ENW89842A2JF
CC2564
NR for new designs
PAN1323
-40°C to +85°C
ENW89842A2KF
CC2564
NR for new designs
PAN1325A
-20°C to +70°C
ENW89829A2JF
CC2560A
NR for new designs
PAN1325A
-40°C to +85°C
ENW89829A2KF
CC2560A
NR for new designs
PAN1325B
-40°C to +85°C
ENW89829A3KF
CC2560B
Recommended for new designs
PAN1326
-20°C to +70°C
ENW89823A2JF
CC2564
NR for new designs
PAN1326
-40°C to +85°C
ENW89823A2KF
CC2564
NR for new designs
PAN1326B
-40°C to +85°C
ENW89823A3KF
CC2564B
Recommended for new designs
PAN1327
-20°C to +70°C
ENW89827A2JF
CC2564
NR for new designs
PAN1327
-40°C to +85°C
ENW89827A2KF
CC2564
NR for new designs
NR: Not recommended
ETU: Easy to use development board
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
51 of 61
DATE
28.02..2014
RoHS Declaration
Declaration of environmental compatibility for supplied products:
Hereby we declare to our best present knowledge based on declaration of our
suppliers that this product do not contain by now the following substances which
are banned by Directive 2002/95/EC (RoHS) or if contain a maximum
concentration of 0,1% by weight in homogeneous materials for
•
•
•
•
•
Lead and lead compounds
Mercury and mercury compounds
Chromium (VI)
PBB (polybrominated biphenyl) category
PBDE (polybrominated biphenyl ether) category
And a maximum concentration of 0,01% by weight in homogeneous materials for
•
30
Cadmium and cadmium compounds
DATA SHEET STATUS
This data sheet contains the final specification (RELEASE).
Panasonic reserves the right to make changes at any time without notice in
order to improve design and supply the best possible product.
Supplementary data will be published at a later date.
Consult the most recently issued data sheet before initiating or completing a
design.
Use this URL to search for the most recent version of this data sheet: PAN13xx
Latest Data Sheet!
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
31
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
52 of 61
DATE
28.02..2014
HISTORY FOR THIS DOCUMENT
Revision
Date
Modification / Remarks
0.90
18.12.2009
1 preliminary version
0.95
01.03.2010
Updated Chapter 14.2 and 28.
0.96
Not released
Change ESD Information on foot note 7 in chapter Pin Description
0.97
25.03.2010
Various updates. Deleted links to TI Datasheet.
0.98
21.04.2010
0.99
22.10.2010
1.00
04.11.2010
1 internal Release.
1.01
03.12.2010
Included reference to PAN1325 Application Note. AN-1325-2420-111.pdf
1.02
10.01.2011
Changed wording in Chapter 34.2 ”Industry Canada Certification”.
1.03
23.05.2011
Included DOC for PAN1315 series. Included PAN13xx ANT and BLE Addendum Rev1.x.pdf
reference. Included Note for IO voltage and MLD_OUT pin.
1.04
02.07.2011
Corrected wording in Chapter 34.3 European R&TTE Declaration of Conformity.
1.05
28.10.2011
1.06
15.11.2011
3.00
11.01.2012
Merging PAN13xx documents into this specification and correct some format
3.10
16.01.2012
Minor mistakes fixed
3.20
29.05.2012
DoC replaced with revised version
3.30
11.06.2012
3.31
27.06.2012
3.40
18.07.2012
3.50
31.10.2012
3.60
17.05.2013
Changed FCC-ID for models ENW89823xxx and ENW89827xxx.
3.70
31.05.2013
DoC replaced with revised version, updated links.
3.71
15.08.2013
Added component values for low pass filter on PCM interface.
3.80
11.11.2013
Changed CC2567 to CC2564 in chapter ordering information.
3.90
03.12.2013
Included CC2560/4B PAN1325/6B in chapter 1.1.
4.00
19.12.2013
Updated chapter European R&TTE Declaration of Conformity
4.10
10.01.2014
Added chapter 19 Radiation Pattern
4.20
28.02.2014
Changed chapter Key Features according to EN regulations
st
Updated Links Some minor changes in Chapter 8 and 9.1 and change the base for the values
in Chapter 9.
Adopted changes according to CC2560 Datasheet. Included Interface Description,
performance values. Not released.
st
Including CC2560A silicon PAN1315A HW40 at Chapter 1.1, Chapter New PAN1315A and
Chapter 0. Deleted ES label in Chapter
Added overview for the core specification and their addendums. Updated front page. Updated
Related Documents.
Added triple mode stack Module PAN1323, add PAN1323 to ordering and software information
overview, Software Block Diagram added, Bluetooth Inter IC-Sound chapter information added
Layout Recommandations with Antenna added, Application Note LGA added
Added design information to use low pass filter (chapter 11.1 / 11.9) for better noise
surpression when using PCM interface
Re-organize chapter Regulatory Information and added 2 chapters
1. NCC Statement (only valid for PAN1325)
2. Bluetooth SIG Statement
3. Chapter 11.9, Second Paragraph was updated
4. Link in Chapter 34.1.1. was fixed
Changed the Overview in chapter Ordering Information
Included -40°C to 85°C Version ENW898xxA2KF. So called K-Version.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
32
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
53 of 61
DATE
28.02..2014
RELATED DOCUMENTS
For an update, search in the suitable homepage.
[1]
PAN1323ETU Design-Guide:
http://www.panasonic.com/industrial/includes/pdf/PAN1323ETUDesignGuide.pdf
[2]
CC2560 Product Bulletin: http://focus.ti.com/pdfs/wtbu/cc2560_slyt377.pdf
[3]
Bluetooth SW for MSP430 is supported by IAR IDE service pack 5.10.6 and
later. Use full IAR version edition (not the kick-start version). You can find info
on IAR at http://www.iar.com/website1/1.0.1.0/3/1/ and www.MSP430.com . Note, that
there is an option for a 30-day free version of IAR evaluation edition.
[4]
PAN13xx CAD data: http://www.pedeu.panasonic.de/pdf/174ext.zip
[5]
To aide in the implementation of this reference design, Eagle formatted
application and layout files are available on the web at the address below.
[6]
www.panasonic.com/industrial/includes/pdf/PAN1323ETU_Eagle_Ver1_1.zip
[7]
Application Note Land Grid Array: http://www.pedeu.panasonic.de/pdf/184ext.pdf
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
33
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
54 of 61
DATE
28.02..2014
GENERAL INFORMATION
© Panasonic Industrial Devices Europe GmbH.
All rights reserved.
This document may contain errors. Panasonic reserves the right to make corrections,
modifications, enhancements, improvements, and other changes to its literature at any
time. Customers should obtain the latest relevant information before placing orders and
should verify that such information is current and complete. All products are sold subject to
Panasonic’s terms and conditions of sale supplied at the time of order acknowledgment.
If we deliver ES samples to the customer, these samples have the status Engineering
Samples. This means, the design of this product is not yet concluded. Engineering
Samples may be partially or fully functional, and there may be differences to be published
Data Sheet.
Engineering Samples are not qualified and are not to be used for reliability testing or series
production.
Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear
defects due to their status of development and the lack of qualification mentioned above.
Panasonic rejects any liability or product warranty for Engineering Samples. In particular,
Panasonic disclaims liability for damages caused by
• the use of the Engineering Sample other than for Evaluation Purposes, particularly
the installation or integration in an other product to be sold by Customer,
• deviation or lapse in function of Engineering Sample,
• improper use of Engineering Samples.
Panasonic disclaimes any liability for consequential and incidental damages. Panasonic
assumes no liability for applications assistance or customer product design. Customers are
responsible for their products and applications using Panasonic components. To minimize
the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards. In case of any questions, contact your local
sales representative.
34
REGULATORY INFORMATION
34.1 FCC FOR US
34.1.1 FCC Notice
The devices PAN13xx, for details refer to Chapter 28 in this document, including the
antennas, which are listed in Chapter 34.1.5 of this data sheet, complies with Part 15
of the FCC Rules. The device meets the requirements for modular transmitter
approval as detailed in FCC public Notice DA00-1407.transmitter. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
55 of 61
DATE
28.02..2014
34.1.2 Caution
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Panasonic Industrial Devices Europe GmbH
may void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
34.1.3 Labeling Requirements
The Original Equipment Manufacturer (OEM) must ensure that FCC labelling
requirements are met. This includes a clearly visible label on the outside of the OEM
enclosure specifying the appropriate Panasonic FCC identifier for this product as well as
the FCC Notice above. The FCC identifiers are:
FCC ID: T7V1315 for PAN1315 and PAN1325
FCC ID: T7V1316 for PAN1316, PAN1317, PAN1326 and PAN1327
This FCC identifiers are valid for all PAN13xx modules, for details, see the Chapter 28.
Ordering Information. In any case the end product must be labelled exterior with
"Contains FCC ID: T7V1315" (PAN1315, PAN1325) or
"Contains FCC ID: T7V1316" (PAN1316, PAN1317, PAN1326 and PAN1327).
34.1.4 Antenna Warning
For the related part number of PAN13xx refer to Chapter 28. Ordering Information.
These devices are tested with a standard SMA connector and with the antennas listed
below. When integrated in the OEMs product, these fixed antennas require installation
preventing end-users from replacing them with non-approved antennas. Any antenna
not in the following tables must be tested to comply with FCC Section 15.203 for unique
antenna connectors and Section 15.247 for emissions. The FCC identifier for this device
with the antenna listed below are the same (FCC ID: T7V1315 or T7V1316).
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
56 of 61
DATE
28.02..2014
34.1.5 Approved Antenna List (PAN1315, PAN1325)
Note: We are able to qualify your antenna and will add to this list as that process is completed.
Item
Part Number
Manufacturer
Frequency Band
Type
Gain (dBi)
1
2450AT43B100
Johanson Technologies
2.4GHz
Chip-Antenna
+1.3
2
LDA212G3110K Murata
2.4GHz
Chip-Antenna
+0.9
3
4788930245
2.4GHz
Chip-Antenna
+0.5
Würth Elektronik
34.1.6 Approved Antenna List (PAN1316, PAN1317, PAN1326, PAN1327)
Note: We are able to qualify your antenna and will add to this list as that process is completed.
Item
Part Number
Manufacturer
1
LDA212G3110K Murata
Frequency Band
Type
Gain (dBi)
2.4GHz
Chip-Antenna
+0.9
34.1.7 RF Exposure PAN13xx
To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer
(OEM) must ensure that the approved antenna in the previous tables must be installed.
The preceding statement must be included as a CAUTION statement in manuals for
products operating with the approved antennas in the previous table to alert users on
FCC RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the
integrated radio module is not allowed.
The radiated output power of PAN13xx with mounted ceramic antenna
(FCC ID: T7V1315 or T7V1316) is far below the FCC radio frequency exposure limits.
Nevertheless, the PAN13xx shall be used in such a manner that the potential for human
contact during normal operation is minimized.
End users may not be provided with the module installation instructions. OEM
integrators and end users must be provided with transmitter operating conditions for
satisfying RF exposure compliance.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
57 of 61
DATE
28.02..2014
34.2 INDUSTRY CANADA CERTIFICATION
34.2.1 IC Notice
This device complies with Industry Canada RSS-210 (Rev.8). Operation is subject to the
following two conditions
1) this device may not cause interference, and
2) this device must accept any interference, including interference that may cause
undesired operation of the device.
PAN131x is licensed to meet the regulatory requirements of Industry Canada (IC),
license:
IC: 216Q-1315 (PAN1315, PAN1325)
IC: 216Q-1316 (PAN1316, PAN1317, PAN1326, PAN1327)
Manufacturers of mobile, fixed or portable devices incorporating this module are advised
to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure
limits. Users can obtain Canadian information on RF exposure and compliance from
www.ic.gc.ca.
This device has been designed to operate with the antennas listed in Tables 34.1.5 and
34.1.6 above, having a maximum gain of 1.3 dBi (PAN13x6: 0.9dBi). Antennas not
included in this list or having a gain greater than 1.3 dBi (PAN13x6: 0.9dBi) are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms. The
antenna used for this transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter. Due to the model size the IC identifier is displayed in
the installation instruction.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
PAN131x est garanti conforme aux dispositions règlementaires d’Industry Canada (IC),
licences:
IC: 216Q-1315 (PAN1315, PAN1325)
IC: 216Q-1316 (PAN1316, PAN1317, PAN1326, PAN1327)
Il est recommandé aux fabricants d’appareils fixes, mobiles ou portables de consulter la
réglementation en vigueur et de vérifier la conformité de leurs produits relativement aux
limites d’exposition aux rayonnements radiofréquence ainsi qu’au débit d’absorption
spécifique maximum autorisé.
Des informations pour les utilisateurs sur la réglementation Canadienne concernant
l’exposition aux rayonnements RF sont disponibles sur le site www.ic.gc.ca.
Ce produit a été développé pour fonctionner spécifiquement avec les antennes listées
dans le tableau ci-dessus, présentant un gain maximum de 1.3dBi (PAN13x6:0.9dBi).
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
58 of 61
DATE
28.02..2014
Des antennes autres que celles listées ici, ou présentant un gain supérieur a 1.3dBi
(PAN13x6: 0.9dBi) ne doivent en aucune circonstance être utilises en combinaison avec
ce produit. L’impédance des antennes compatibles est 50Ohm. L’antenne utilisée avec
ce produit ne doit ni être située à proximité d’une autre antenne ou d’un autre émetteur,
ni être utilisée conjointement avec une autre antenne ou un autre émetteur. En raison
de la taille du produit, l’identifiant IC est fourni dans le manuel d’installation.
34.2.2 Labeling Requirements
The Original Equipment Manufacturer (OEM) must ensure that IC labelling requirements
are met. This includes a clearly visible label on the outside of the OEM enclosure
specifying the appropriate Panasonic IC identifier for this product as well as the IC
Notice above. The IC identifiers are:
IC: 216Q-1315 (PAN1315, PAN1325)
IC: 216Q-1316 (PAN1316, PAN1317, PAN1326, PAN1327)
This IC identifiers are valid for all PAN13xx modules, for details, see the Chapter 28.
Ordering Information. In any case the end product must be labelled exterior with
"Contains IC: 216Q-1315" (PAN1315, PAN1325) or
"Contains IC: 216Q-1316" (PAN1316, PAN1317, PAN1326 and PAN1327).
Obligations d’étiquetage
Les fabricants d’équipements (OEM) doivent s’assurer que les obligations d’étiquetage
du produit final sont remplies. Ces obligations incluent une étiquette clairement visible à
l’extérieur de l’emballage externe, comportant l’identifiant IC du module Panasonic
inclus, ainsi que la notification ci-dessus.
Les identifiants IC sont:
IC: 216Q-1315 (PAN1315, PAN1325)
IC: 216Q-1316 (PAN1316, PAN1317, PAN1326, PAN1327)
Ces identifiants sont valides pour tous les modules PAN13xx (Chapter 28. Ordering
Information). Dans tous les cas les produits finaux doivent indiquer sur leur emballage
externe une des mentions suivantes:
"Contient IC: 216Q-1315” (PAN1315, PAN1325) ou
"Contient IC: 216Q-1316” (PAN1316, PAN1317, PAN1326, PAN1327).
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
59 of 61
DATE
28.02..2014
34.3 EUROPEAN R&TTE DECLARATION OF CONFORMITY
All modules described in this data sheet comply to the following standards:
- EN 60950-1: 2006
- EN 301 489-17 V2.2.1
- EN 300 328 V1.8.1
For article 3.1 (a) : Health and Safety of the User
For article 3.1 (b) : Electromagnetic Compatibility
For article 3.2 : Effective use of spectrum allocated
As a result of the conformity assessment procedure described in Annex III of the
Directive 1999/5/EC, the end-customer equipment should be labelled as follows:
PAN13xx and their versions in the specified reference design can be used in the
following countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The
Netherlands, the United Kingdom, Switzerland, and Norway.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
60 of 61
DATE
28.02..2014
34.4 NCC FOR TAIWAN
34.4.1 Labeling Requirements
Due to the limited size on the module, the NCC ID is not visible on the module.
When the module is installed inside another device, then the outside of the device into
which the module is installed must also display a label referring to the enclosed module.
This exterior label can use wording such as the following:
“Contains Transmitter Module NCC ID:” or “Contains NCC ID:”
CCAJ11LPxxxxTx
Any similar wording that expresses the same meaning may be used.
For ENW89829A2JF the ID is CCAJ12LP2601T5.
For ENW89818A2JF the ID is CCAJ12LP2600T3.
Panasonic is able to provide the above content from the label as a vector graphic,
please ask at [email protected].
34.4.2 NCC Statement
Due to the national rule from Taiwan we have to print the below statement in Chinese
language.
根據NCC低功率電波輻射性電機管理辦法 規定:
1.1 第十二條
1.2 經型式認證合格之低功率射頻電機,非經許可,公
司、商號或使用者均不得擅自變更頻率、加大功率或變更
原設計之特性及功能。
1.3 第十四條
1.4 低功率射頻電機之使用不得影響飛航安全及干擾合
法通信;經發現有干擾現象時,應立即停用,並改善至無
干擾時方得繼續使用。
前項合法通信,指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電
波輻射性電機設備之干擾。
34.5 BLUETOOTH SIG STATEMENT
The Design is listed as Controller Subsystem with QDID: B019784
https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=19784
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
CLASSIFICATION
SUBJECT
PRODUCT SPECIFICATION
CLASS 1 or 2 BLUETOOTH MODULE
CUSTOMER’S CODE
PAN13XX Core Specification
35
PANASONIC’S CODE
See Chapter 28. Ordering Information
No.
DS-13xx-2400-102
REV.
4.20
PAGE
61 of 61
DATE
28.02..2014
LIFE SUPPORT POLICY
This Panasonic product is not designed for use in life support appliances, devices, or
systems where malfunction can reasonably be expected to result in a significant
personal injury to the user, or as a critical component in any life support device or
system whose failure to perform can be reasonably expected to cause the failure of the
life support device or system, or to affect its safety or effectiveness. Panasonic
customers using or selling these products for use in such applications do so at their own
risk and agree to fully indemnify Panasonic for any damages resulting.
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de