TLHK4400L Datasheet

TLHK4400L
www.vishay.com
Vishay Semiconductors
High Intensity LED in Ø 3 mm Tinted Diffused Package
FEATURES
• AlInGaP technology
• Standard Ø 3 mm (T-1) package
• Small mechanical tolerances
• Suitable for DC and high peak current
• Wide viewing angle
• Very high intensity
19222
• Luminous intensity categorized
• Material categorization: 
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
This device has been designed to meet the increasing
demand for AlInGaP technology general indicating and
lighting purposes.
APPLICATIONS
It is housed in a 3 mm diffused plastic package. The wide
viewing angle of these devices provides a high brightness
across a large field of view.
• Status lights
• Off/on indicator
All packing units are categorized in luminous intensity
groups. That allows users to assemble LEDs with uniform
appearance.
• Background illumination
PRODUCT GROUP AND PACKAGE DATA
• Legend light
• Readout lights
• Maintenance lights




• Product group: LED
• Package: 3 mm
• Product series: standard
• Angle of half intensity: ± 30°
PARTS TABLE
PART
COLOR
LUMINOUS INTENSITY
WAVELENGTH
FORWARD VOLTAGE
at IF
at IF
at IF
(mcd)
(nm)
(V)
(mA)
(mA)
(mA)
MIN.
TYP. MAX.
MIN. TYP. MAX.
MIN. TYP. MAX.
TECHNOLOGY
TLHK4400L
Red
16
70
-
10
626
630
639
10
-
1.9
2.6
20
AlInGaP on GaAs
TLHK4400L-PSZ
Red
16
70
-
10
626
630
639
10
-
1.9
2.6
20
AlInGaP on GaAs
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
TLHK4400L
PARAMETER
TEST CONDITION
SYMBOL
VALUE
VR
5
V
Tamb  60 °C
IF
30
mA
tp  10 μs
IFSM
0.1
A
mW
Reverse voltage (1)
DC forward current
Surge forward current
UNIT
Power dissipation
PV
80
Junction temperature
Tj
100
°C
Tamb
-40 to +100
°C
Tstg
-55 to +100
°C
Tsd
260
°C
RthJA
400
K/W
Operating temperature range
Storage temperature range
Soldering temperature
t  5 s, 2 mm from body
Thermal resistance junction/ambient
Note
• Driving the LED in reverse direction is suitable for a short term application
Rev. 1.2, 06-Jun-14
Document Number: 84180
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHK4400L
www.vishay.com
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLHK4400L, RED
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Luminous intensity
PARAMETER
IF = 10 mA
IV
16
70
-
mcd
Dominant wavelength
IF = 10 mA
d
626
630
639
nm
Peak wavelength
IF = 10 mA
p
-
643
-
nm
Angle of half intensity
IF = 10 mA

-
± 30
-
deg
Forward voltage
IF = 20 mA
VF
-
1.9
2.6
V
Reverse current
VR = 5 V
IR
-
-
10
μA
VR = 0 V, f = 1 MHz
Cj
-
15
-
pF
Junction capacitance
LUMINOUS INTENSITY CLASSIFICATION
GROUP
COLOR CLASSIFICATION
RED
LIGHT INTENSITY (mcd)
STANDARD
MIN.
MAX.
S
T
U
V
W
X
Y
Z
AA
BB
16
25
40
63
100
130
180
240
320
430
32
50
80
125
200
260
360
480
640
860
Note
• Luminous intensity is tested at a current pulse duration of 25 ms
and an accuracy of ± 11 %.
The above type numbers represent the order groups which
include only a few brightness groups. Only one group will be
shipped on each reel (there will be no mixing of two groups on
each reel).
In order to ensure availability, single brightness groups will not
be orderable.
In a similar manner for colors where wavelength groups are
measured and binned, single wavelength groups will be shipped
on any one reel.
In order to ensure availability, single wavelength groups will not
be orderable.
GROUP
DOM. WAVELENGTH (nm)
MIN.
626
628
630
632
634
636
1
2
3
4
5
6
MAX.
629
631
633
635
637
639
Note
• Wavelengths are tested at a current pulse duration of 25 ms.













TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
0°
IV rel - Relative Luminous Intensity
I F - Forward Current (mA)
60
50
40
30
20
10
0
0
95 10894
20
40
60
80
Fig. 1 - Forward Current vs. Ambient Temperature
Rev. 1.2, 06-Jun-14
20°
30°
40°
1.0
0.9
50°
0.8
60°
70°
0.7
100
T amb - Ambient Temperature (°C)
10°
80°
0.6
0.4
0.2
0
0.2
0.4
0.6
95 10042
Fig. 2 - Relative Luminous Intensity vs. Angular Displacement
Document Number: 84180
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHK4400L
www.vishay.com
Vishay Semiconductors
I V rel - Relative Luminous Intensity
1.2
Irel - Relative Intensity
1.0
0.8
0.6
0.4
0.2
0.0
600
620
640
660
680
0.4
I F = 10 mA
0
20
60
80
100
Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature
Ispec - Specific Luminous Intensity
10
40
Tamb - Ambient Temperature (°C)
96 12077
100
IF - Forward Current (mA)
0.8
700
Fig. 3 - Relative Intensity vs. Wavelength
2.0
1.6
1.2
0.8
0.4
0.0
1
1
1.5
2
2.5
3
VF - Forward Voltage (V)
95 10878
96 11589
Fig. 4 - Forward Current vs. Forward Voltage
IV rel - Relative Luminous Intensity
1.2
0
λ - Wavelength (nm)
96 12075
1.6
1
2
5
1
0.5
0.2
10
20
0.1 0.05
50
IF (mA)
0.02
tp/T
Fig. 7 - Relative Luminous Intensity vs. Forward Current/Duty Cycle
10
1
0.1
0.01
1
9611588
10
100
IF - Forward Current (mA)
Fig. 5 - Relative Luminous Intensity vs. Forward Current
Rev. 1.2, 06-Jun-14
Document Number: 84180
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHK4400L
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
20236
±1
±2
TAPE DIMENSIONS
FOR Ø 3 mm TLHK4400L-PSZ
“H”
DIMENSION H ± 0.5 mm
PS
28.5
± 0.5
Explanation:
Z - Ammopack
9
12 ± 0.3
OPTION
18
+1
- 0.5
0.3 ± 0.2
12.7 ± 1
0.9 max.
Ø4
2.54
± 0.2
+ 0.6
- 0.1
5.08 ± 0.7
6.35
12.7 ± 0.2
± 0.7
Measure limit over 20 index-holes: ± 1
Fig. 8 - Tape Dimensions Ø 3 mm Devices
Rev. 1.2, 06-Jun-14
Document Number: 84180
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHK4400L
www.vishay.com
Vishay Semiconductors
AMMOPACK
Tape feed direction
Diodes: cathode before anode
Transistors: collector before emitter
Label
Tape feed direction
Diodes: anode before cathode
Transistors: emitter before collector
94 8667-2
Fig. 9 - Tape Direction
Note
• The new nomenclature for ammopack is ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired
position: “+” for anode first, or “-“ for cathode first. AS12Z and AS21Z are still valid for already existing types, BUT NOT FOR NEW DESIGN.
PACKING METHOD
Rev. 1.2, 06-Jun-14
BULK
AMMOPACK (Z)
1 x 5000 pcs
5 x 2000 pcs
Document Number: 84180
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000