MATERIAL DECLARATION SHEET Material PM13656S Product Line SMD POWER INDUCTOR Date 05-December-2006 No. Construction element Material group Material Weight [g] Materials 1 Core Iron Core 3.05 Iron Other 2 3 4 Solder Wire Bar Solder 0.02 Enamelled Copper Wire 1.20 Epoxy 0.33 Total weight 4.6 Adhesive Contact person Cathy Godfrey Bourns location Riverside, CA Phone Ext. 5008 Headquarters Riverside CA Average mass [%] Sum [%] 7439-89-6 98 100 CAS N/A Traces 2 Sn 7440-31-5 99.3 Cu 7440-50-8 0.7 Cu 7440-50-8 90.08~99.00 Polyester Resin N/A 1~9.92 Epoxy Resin 25068-38-6 N/A 100 100 100 Bourns , Inc. 1200 Columbia Ave. Riverside, CA 92507 USA phone: 909 781-5690 fax: 909 781-5273 Fax e-mail if applicable [email protected] www.bourns.com page 1 of 2 MATERIAL DECLARATION SHEET Important remarks: 1. 2. 3. 4. Traces are product parts substances etc. that are below a percentage of 0.1% of total weight. A list of the legally regulated substances or materials is available at internet address http://www.eicta.org/content.asp?pageID=113 Substances, materials etc. with possible harm to men and environment are listed. There are no risks for human beings and to the environment if products are used properly as designated. This shall not apply to risks caused during procedures for disposal etc. 5. All statements herein are based on our present knowledge. Headquarters Riverside CA www.bourns.com page 2 of 2