TLHF5400 www.vishay.com Vishay Semiconductors High Intensity LED, Ø 5 mm Tinted Diffused Package FEATURES • • • • • • • • 19223 DESCRIPTION This device has been designed to meet the increasing demand for extremely bright yellow LEDs. It is housed in a 5 mm tinted diffused plastic package. Despite of the wide viewing angle this device provides a high luminous intensity. APPLICATIONS • • • • • • • PRODUCT GROUP AND PACKAGE DATA • • • • AlInGaP technology Standard T-1¾ package Small mechanical tolerances Suitable for DC and high peak current Wide viewing angle Very high intensity Luminous intensity categorized Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Product group: LED Package: 5 mm Product series: standard Angle of half intensity: ± 30° Status lights Off/on indicator Lightpipe Outdoor display Medical instruments Maintenance lights Legend lights PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) MIN. TYP. MAX. 16 160 - TLHF5400 Soft orange at IF (mA) WAVELENGTH (nm) MIN. TYP. MAX. 598 605 10 611 FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. - 2 2.6 10 at IF (mA) TECHNOLOGY 20 AllnGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C unless otherwise specified) TLHF5400 PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb 65 °C IF 30 mA tp 10 μs IFSM 0.1 A Tamb 65 °C PV 80 mW Reverse voltage DC forward current Surge forward current Power dissipation UNIT Tj 100 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 55 to + 100 °C Tsd 260 °C RthJA 350 K/W Junction temperature Soldering temperature t 5 s, 2 mm from body Thermal resistance junction/ambient OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLHF5400, SOFT ORANGE PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 10 mA IV 16 160 - mcd Dominant wavelength IF = 10 mA d 598 605 611 nm Peak wavelength IF = 10 mA p - 610 - nm Angle of half intensity IF = 10 mA - ± 30 - deg Forward voltage IF = 20 mA VF - 2 2.6 V Reverse voltage IR = 10 μA VR 5 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Junction capacitance Note (1) In one packing unit I Vmin./IVmax. 0.5 Rev. 1.7, 02-May-13 Document Number: 83132 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHF5400 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) IV rel - Relative Luminous Intensity 1.6 50 40 30 20 10 0 0 95 10046 40 60 80 IF = 20 mA 1.2 1.0 0.8 0.6 0.4 0.2 95 10880 Tamb - Ambient Temperature (°C) 0° 10° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.4 0.2 0 0.2 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature 20° 30° 0.6 0 100 Fig. 1 - Forward Current vs. Ambient Temperature IV rel - Relative Luminous Intensity 1.4 0.0 20 0.4 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 60 10 1 0.1 0.01 1 0.6 95 10042 96 11588 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement 10 100 IF - Forward Current (mA) Fig. 5 - Relative Luminous Intensity vs. Forward Current 100 1.2 I rel - Relative Intensity IF - Forward Current (mA) soft orange 1.0 10 0.8 0.6 0.4 0.2 0.0 1 1 95 10878 1.5 2 2.5 VF - Forward Voltage (V) Fig. 3 - Forward Current vs. Forward Voltage Rev. 1.7, 02-May-13 3 560 95 10885 580 600 620 640 660 λ - Wavelength (nm) Fig. 6 - Relative Intensity vs. Wavelength Document Number: 83132 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHF5400 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C R 2.49 (sphere) < 0.7 (4.7) 7.7 ± 0.15 8.7 ± 0.3 35.5 ± 0.55 12.5 ± 0.3 Ø 5.8 ± 0.15 A Area not plane 1.1 ± 0.25 1 min. Ø 5 ± 0.15 0.15 0.5 +- 0.05 + 0.15 0.5 - 0.05 technical drawings according to DIN specifications 2.54 nom. 6.544-5258.02-4 Issue: 7; 23.07.10 95 10916 Rev. 1.7, 02-May-13 Document Number: 83132 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000