SFF1001GA - SFF1008GA Taiwan Semiconductor CREAT BY ART 10A, 50V - 600V Isolated Glass Passivated Super Fast Rectifiers FEATURES - High efficiency, low VF. - High current capability - High reliability - High surge current capability - Low power loss. - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 ITO-220AB MECHANICAL DATA Case: ITO-220AB Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: As marked Mounting torque: 0.56 Nm max. (5 in-lbs. max.) Weight: 1.8 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) SFF PARAMETER SFF SFF SFF SFF SFF SFF SFF SYMBOL 1001 1002 1003 1004 1005 1006 1007 1008 UNIT GA GA GA GA GA GA GA GA Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 500 600 V Maximum average forward rectified current IF(AV) 10 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 125 A Maximum instantaneous forward voltage (Note 1) IF = 5A Maximum reverse current @ rated VR TJ=25°C TJ=125°C Maximum reverse recovery time (Note 2) Typical junction capacitance (Note 3) Typical thermal resistance Operating junction temperature range Storage temperature range VF 0.975 1.7 10 IR 35 ns 50 70 V μA 400 trr CJ 1.3 pF RθJC 8 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse Test with PW=300μs, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A. Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V DC. Document Number: DS_D0000132 Version: D15 SFF1001GA - SFF1008GA Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. PACKING CODE SUFFIX SFF100xGA (Note 1) H PACKING CODE SUFFIX C0 G PACKAGE PACKING ITO-220AB 50 / Tube Note 1: "x" defines voltage from 50V (SFF1001GA) to 600V (SFF1008GA) EXAMPLE PREFERRED P/N PART NO. SFF1008GAHC0 SFF1008GA PART NO. SUFFIX PACKING CODE PACKING CODE H DESCRIPTION SUFFIX AEC-Q101 qualified Green compound G C0 RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 FORWARD CURRENT DERATING CURVE FIG. 2 TYPICAL REVERSE CHARACTERISTICS AVERAGE FORWARD CURRENT (A) 12 10 8 6 RESISTER OR INDUCTIVE LOAD WITH HEATSINK 4 2 0 0 25 50 75 100 125 150 INSTANTANEOUS REVERSE CURRENT(μA) 100 CASE TEMPERATURE (°C) 90 60 30 0 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) 8.3ms Single Half Sine Wave Document Number: DS_D0000132 1 TJ=25°C 0.1 0 20 40 60 80 100 120 140 100 120 NUMBER OF CYCLES AT 60 Hz TJ=75°C FIG. 4 TYPICAL FORWARD CHARACTERISTICS 150 10 10 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1 TJ=100°C SFF1001GA-04GA 10 1 SFF1005GA-06GA SFF1007GA-08GA 0.1 Pulse Width=300μs 1% Duty Cycle 0.01 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) Version: D15 SFF1001GA - SFF1008GA Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE 100 f=1.0MHz Vsig=50mVp-p CAPACITANCE (pF) 90 80 SFF1001GA-04GA 70 60 SFF1005GA-08GA 50 40 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS ITO-220AB DIM. Unit (mm) Unit (inch) Min Max Min Max A 4.30 4.70 0.169 0.185 B 2.50 3.16 0.098 0.124 C 2.30 2.96 0.091 0.117 D 0.46 0.76 0.018 0.030 E 6.30 6.90 0.248 0.272 F 9.60 10.30 0.378 0.406 G 3.00 3.40 0.118 0.134 H 0.95 1.45 0.037 0.057 I 0.50 0.90 0.020 0.035 J 2.40 3.20 0.094 0.126 K 14.80 15.50 0.583 0.610 L - 4.10 - 0.161 M 12.60 13.80 0.496 0.543 N - 1.80 - 0.071 O 2.41 2.67 0.095 0.105 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Document Number: DS_D0000132 Version: D15 SFF1001GA - SFF1008GA Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D0000132 Version: D15