VS-403CNQ100PbF www.vishay.com Vishay Semiconductors High Performance Schottky Rectifier, 400 A FEATURES Lug terminal anode 1 Lug terminal anode 2 • 175 °C TJ operation • Center tap module • Low forward voltage drop • High frequency operation • Guard ring for enhanced ruggedness and long term reliability Base common cathode TO-244 • UL approved file E222165 • Designed and qualified for industrial level • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION PRODUCT SUMMARY IF(AV) 400 A VR 100 V Package TO-244 Circuit Two diodes common cathode The VS-403CNQ... center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, freewheeling diodes, welding, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES UNITS 400 A 100 V 25 500 A 0.69 V -55 to 175 °C VS-403CNQ100PbF UNITS 100 V Rectangular waveform VRRM IFSM tp = 5 μs sine VF 200 Apk, TJ = 125 °C (per leg) TJ Range VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 SYMBOL TEST CONDITIONS per leg VALUES UNITS 200 IF(AV) 50 % duty cycle at TC = 141 °C, rectangular waveform per device 400 A Maximum peak one cycle non-repetitive surge current per leg See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 13 A, L = 0.2 mH 15 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 1 A 5 μs sine or 3 μs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied 25 500 3300 Revision: 26-Mar-14 Document Number: 94206 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-403CNQ100PbF www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 200 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 200 A IRM (1) Maximum junction capacitance per leg CT 1.07 0.82 6 VR = Rated VR TJ = 125 °C Typical series inductance per leg LS dV/dt mA 80 VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Maximum voltage rate of change V 0.69 TJ = TJ maximum TJ = 25 °C UNITS 0.84 TJ = 25 °C 400 A 400 A Maximum reverse leakage current per leg See fig. 2 VALUES 5500 From top of terminal hole to mounting plane Rated VR pF 5.0 nH 10 000 V/μs Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per leg SYMBOL MIN. TYP. TJ, TStg -55 - RthJC Thermal resistance, junction to case per module Thermal resistance, case to heatsink RthCS Weight MAX. UNITS - 175 °C - 0.19 - - 0.095 - 0.10 - - 68 - g - 2.4 - oz. 35.4 (4) 53.1 (6) Mounting torque center hole 30 (3.4) 40 (4.6) Terminal torque 30 (3.4) - 44.2 (5) Vertical pull - - 80 2" lever pull - - 35 lbf in (N m) lbf in 1000 1000 TJ = 175 °C TJ = 175 °C IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) Mounting torque °C/W TJ = 125 °C 100 TJ = 25 °C 10 TJ = 150 °C 100 TJ = 125 °C 10 TJ = 100 °C 1 TJ = 75 °C TJ = 50 °C 0.1 0.01 TJ = 25 °C 0.001 1 0 0.3 0.6 0.9 1.2 1.5 1.8 0 20 40 60 80 100 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) Revision: 26-Mar-14 Document Number: 94206 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-403CNQ100PbF www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 10 000 TJ = 25 °C 1000 0 10 20 30 40 50 60 70 80 90 100 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 1 0.1 D = 0.75 0.01 D = 0.50 D = 0.33 Single pulse (thermal resistance) D = 0.25 D = 0.20 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) 180 200 160 Average Power Loss (W) Allowable Case Temperature (°C) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) DC Square wave (D = 0.50) 80 % rated Vr applied 140 120 100 150 D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 100 RMS limit DC 50 See note (1) 80 0 0 50 100 150 200 250 300 0 50 100 150 200 250 300 IF(AV) - Average Forward Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) Revision: 26-Mar-14 Document Number: 94206 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-403CNQ100PbF www.vishay.com IFSM - Non-Repetitive Surge Current (A) Vishay Semiconductors 100 000 At any rated load condition and with rated VRRM applied following surge 10 000 1000 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch IRFP460 D.U.T. Freewheel diode Rg = 25 Ω Current monitor + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR ORDERING INFORMATION TABLE Device code VS- 40 3 C N Q 1 2 3 4 5 6 1 2 - Vishay Semiconductors product Average current rating (x 10) 3 - Product silicon identification 4 - C = Circuit configuration 5 - N = Not isolated 6 - Q = Schottky rectifier diode 7 - Voltage rating (100 = 100 V) 8 - Lead (Pb)-free 100 PbF 7 8 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95021 Revision: 26-Mar-14 Document Number: 94206 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-244 DIMENSIONS in millimeters (inches) 35 (1.37) REF. 13 (0.51) 7 (0.27) 6 (0.23) 17.5 (0.69) 16.5 (0.65) 40 (1.57) 80 (3.15) Ø 5.2 (Ø 0.20) 3 12.6 (0.5) Ø 7.2 (Ø 0.28) (2 places) 3 1 2 21 (0.82) 20 (0.78) ¼" - 20 UNC 9.6 (0.37) MIN. 93 (3.66) MAX. Revision: 24-Apr-15 Document Number: 95021 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000