PANASONIC MAZ2390

This product complies with the RoHS Directive (EU 2002/95/EC).
Zener Diodes
MAZ2xxx Series (MA2xxx Series)
Silicon planar type
Unit: mm
For stabilization of power supply
■ Features
27 min.
Colored band
indicatesVz
classification
Parameter
Symbol
Rating
Unit
Repetitive peak forward current
IFRM
400
mA
PD
1.0
W
PZSM
75
W
Junction temperature
Tj
200
°C
Storage temperature
Tstg
−55 to +200
°C
Non-repetitive reverse surge
power dissipation *2
27 min.
+0.4
2.6–0.2
Anode
Cathode
1st Band
2nd Band
3rd Band
■ Absolute Maximum Ratings Ta = 25°C
Power dissipation *1
4.0±0.5
φ 0.8±00.5
• High reliability, achieved by the combination the planar type
and the glass seal
• Large power dissipation PD
• Wide voltage range: Zener voltage VZ = 5.1 V to 56.0 V
DO-41-A1 Package
Note) *1: PD = 1.0 W achieved with a printed circuit board
*2: t = 100 µs, Tj = 150°C
■ Common Electrical Characteristics Ta = 25°C ± 3°C *1
Parameter
Symbol
Conditions
Forward voltage
VF
IF = 200 mA
Zener voltage *2
VZ
IZ
Specified value
Zener operating resistance
RZ
IZ
Specified value
Reverse current
IR
VR
Specified value
Temperature coefficient of zener voltage *3
SZ
IZ
Specified value
Terminal capacitance
Ct
VR = 0 V, f = 1 MHz
Specified value
Min
Typ
Max
1.0
Unit
V
V
Refer to the list of the
electrical characteristics
within part numbers
Ω
µA
mV/°C
pF
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 5 MHz.
3. *1: The temperature must be controlled 25°C for VZ mesurement.
VZ value measured at other temperature must be adjusted to VZ (25°C)
2:
V
*
Z guaranteed 20 ms after current flow.
3:
T
*
j = 25°C to 150°C
Note) The part number in the parenthesis shows conventional part number.
Publication date: March 2004
SKE00002CED
1
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZ2xxx Series
■ Electrical Characteristics within Part Numbers Ta = 25°C ± 3°C
IZ
(mA)
Min
Max
Reverse
current
IR (µA)
VR
(V)
Max
40
40
40
40
40
40
40
40
20
20
20
20
20
20
20
10
10
10
10
10
10
10
10
10
10
10
4.80
5.20
5.80
6.40
7.00
7.70
8.50
9.40
10.40
11.40
12.40
13.80
15.30
16.80
18.80
20.80
22.80
25.10
28.00
31.00
34.00
37.00
40.00
44.00
48.00
52.00
5.40
6.00
6.60
7.20
7.90
8.70
9.60
10.60
11.60
12.70
14.10
15.60
17.10
19.10
21.20
23.30
25.60
28.90
32.00
35.00
38.00
41.00
46.00
50.00
54.00
60.00
1
2
3
3
3
4
5
7
7
8
9
10
11
12
14
15
16
18
20
22
24
26
29
31
33
35
Zener voltage
Part number
VZ (V)
MAZ2051
MAZ2056
MAZ2062
MAZ2068
MAZ2075
MAZ2082
MAZ2091
MAZ2100
MAZ2110
MAZ2120
MAZ2130
MAZ2150
MAZ2160
MAZ2180
MAZ2200
MAZ2220
MAZ2240
MAZ2270
MAZ2300
MAZ2330
MAZ2360
MAZ2390
MAZ2430
MAZ2470
MAZ2510
MAZ2560
10
8
6
6
5
5
6
6
8
8
10
12
12
15
15
20
20
25
25
30
30
50
50
50
50
50
40
40
40
40
40
40
40
40
20
20
20
20
20
20
20
10
10
10
10
10
10
10
10
10
10
10
0
1.5
2.4
3.1
3.8
4.5
5.4
6.3
7.4
8.4
9.4
11.4
12.5
14.5
16.6
18.6
20.7
23.8
26.9
30.0
33.4
36.3
41.1
44.9
48.6
54.9
l
l
l
25 mm φ 4 mm
0.8
l = 20 mm
10 mm
0.4
0
40
80
120
160
200
Ambient temperature Ta (°C)
240
Brown
Blue
Red
Gray
Green
Red
Brown



















PZSM  tW
l
1.2
0.8
l = 27 mm
20 mm
0.4
0
Green Brown
Green Blue
Blue Red
Blue Gray
Purple Green
Gray Red
White Brown
Brown Black
Brown Brown
Brown Red
Brown Orange
Brown Green
Brown Blue
Brown Gray
Red Black
Red
Red
Red Yellow
Red Purple
Orange Black
Orange Orange
Orange Blue
Orange White
Yellow Orange
Yellow Purple
Green Brown
Green Blue
104
Non-repetitive reverse surge power dissipation PZSM (W)
1.2
200
180
330
280
250
230
220
200
160
160
155
150
135
110
110
95
90
85
80
75
70
65
60
55
50
45
PD  Ta
Power dissipation PD (W)
Power dissipation PD (W)
40
40
40
40
40
40
40
40
20
20
20
20
20
20
20
10
10
10
10
10
10
10
10
10
10
10
Temperature
Terminal
coefficient of capacitance
Marking symbol
zener voltage
(Color indication)
Ct (pF)
SZ (mV/°C)
(VR = 0 V)
IZ
f = 1 MHz
(mA) Typ
1st. 2nd. 3rd.
Typ
1.6
2 mm
2
RZ (Ω)
IZ
(mA) Max
20
20
20
10
10
10
10
10
5
5
5
5
5
5
5
5
5
2
2
2
2
5
5
5
5
5
PD  Ta
1.6
0
Zener
operating
resistance
0
40
80
120
160
200
Ambient temperature Ta (°C)
SKE00002CED
240
PZSM
tW
Non repetitive
103
102
Tj = 25°C
10
1
10−1
1
10
Pulse width tW (ms)
102
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZ2xxx Series
IZ  V Z
IZ  VZ
MAZ2110
80
MAZ2091
80
2
4
6
8
10
MAZ2160
MAZ2180
MAZ2200
MAZ2220
MAZ2240
40
0
0
MAZ2150
60
20
40
12
0
10
20
IZ  V Z
6
8
10
0
0
10
20
30
MAZ2360
MAZ2330
40
Zener current IZ (mA)
80
60
12
MAZ2390
MAZ2430
MAZ2470
MAZ2510
MAZ2560
60
40
20
0
40
0
Zener voltage VZ (V)
Zener voltage VZ (V)
Zth  tW
40
Zth-a
10−1
Zth-m
10−2
10−3
1
10
60
80
RZ  IZ
102
Heat sink
Thickness t = 1.6 mm
Copper foil t = 0.035 mm
Anode side φ 3 mm
Cathode side φ 3 mm
1
Lead distance 5 mm
Zener operating resistance RZ (Ω)
Transient thermal impedance Zth (°C / mW)
20
Zener voltage VZ (V)
10
10−1
80
Tj = 25°C
Dynamic
Characteristics
MAZ2110
MAZ2120
MAZ2130
MAZ2150
MAZ2160
MAZ2180
MAZ2200
MAZ2220
20
40
60
IZ  VZ
MAZ2300
80
10−2
40
100
MAZ2240
Zener current IZ (mA)
MAZ2075
MAZ2082
MAZ2091
MAZ2100
Zener current IZ (mA)
MAZ2051
MAZ2056
MAZ2062
MAZ2068
10−4
10−3
20
Zener voltage VZ (V)
80
4
0
Tj = 25°C
Dynamic
Characteristics
160
2
10
IZ  VZ
Tj = 25°C
Dynamic
Characteristics
0
MAZ2390
MAZ2430
MAZ2470
MAZ2510
MAZ2560
20
0
40
100
200
120
30
Zener voltage VZ (V)
Zener voltage VZ (V)
0
30
MAZ2270
0
MAZ2130
MAZ2270
Zener current IZ (mA)
MAZ2075
MAZ2082
120
MAZ2100
Zener current IZ (mA)
MAZ2062
MAZ2068
Zener current IZ (mA)
MAZ2120
MAZ2051
MAZ2056
Ta = 25°C
Static
Characteristics
MAZ2330
200
Ta = 25°C
Static
Characteristics
MAZ2360
Ta = 25°C
Static
Characteristics
160
IZ  VZ
40
100
MAZ2300
240
102
103
104
Pulse width tW (s)
105
Ta = 25°C
10
MAZ2200
MAZ2150
1
10−1
MAZ2091
MAZ2068
1
10
102
Zener current IZ (mA)
SKE00002CED
3
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZ2xxx Series
Temperature coefficient of zener voltage SZ (mV / °C)
SZ  I Z
8
Tj = 25°C to 150°C
MAZ2100
6
MAZ2091
MAZ2082
4
MAZ2075
MAZ2062
2
MAZ2056
MAZ2051
0
−2
−4
0
10
20
30
40
50
Zener current IZ (mA)
4
SKE00002CED
This product complies with the RoHS Directive (EU 2002/95/EC).
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are
required, or if the failure or malfunction of the products may directly jeopardize life or harm the human
body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not
be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such
as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent
physical injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP