ESD Diodes MAZ9xxxH Series Silicon planar type Unit: mm 0.40+0.10 –0.05 For surge absorption circuit 0.16+0.10 –0.06 (0.95) (0.95) 1.9±0.1 2.90+0.20 –0.05 ■ Absolute Maximum Ratings Ta = 25°C Unit Power dissipation * PD 200 mW Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C 1.1+0.3 –0.1 Rating 1.1+0.2 –0.1 10˚ Symbol 0 to 0.1 Parameter 0.4±0.2 2 1 (0.65) • Two elements anode-common type • Power dissipation PD : 200 mW 5˚ 1.50+0.25 –0.05 ■ Features 2.8+0.2 –0.3 3 1: Cathode 1 2: Cathode 2 3: Anode Mini3-G1 Package Note) *: PD = 200 mW achieved with a printed circuit board. EIAJ: SC-59 Internal Connection 3 1 2 ■ Common Electrical Characteristics Ta = 25°C ± 3°C Parameter Zener voltage* Symbol Conditions VZ IZ Specified value Zener rise operating resistance RZK IZ Specified value Zener operating resistance RZ IZ Specified value Reverse current IR VR Specified value Min Typ Max Unit V Refer to the list of the electrical characteristics within part numbers Ω Ω µA Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Electrostatic breakdown voltage: ±10 kV Test method: IEC1000-4-2 (C = 150 pF, R = 330 Ω, Contact discharge: 10 times) 3. *: The temperature must be controlled 25°C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25°C) VZ guaranted 20 ms after current flow. Publication date: March 2004 SKE00008CED 1 MAZ9xxxH Series ■ Electrical characteristics within part numbers Ta = 25°C ± 3°C Zener voltage Part number Reverse current Zener rise Zener operating operating resistance resistance IR (mA) VR Max (V) RZ (Ω) RZK (Ω) IZ = 5 mA IZ = 0.5 mA Max Max VZ (V) Marking symbol Min Nom Max IZ (mA) MAZ9062H 5.8 6.2 6.6 5 0.2 4 50 100 6.2Z MAZ9068H 6.4 6.8 7.2 5 0.1 4 30 60 6.8Z MAZ9082H 7.7 8.2 8.7 5 0.1 5 30 60 8.2Z MAZ9100H 9.4 10.0 10.6 5 0.05 7 30 60 10Z MAZ9120H 11.4 12.0 12.7 5 0.05 9 30 80 12Z PD Ta I Z VZ 250 102 10 mm 10 mm A I F VF 102 Ta = 25°C Ta = 25°C K 0.8 mm Print foil t = 0.035 mm 0 50 100 150 200 250 4 6 MAZ9120H 10 MAZ9100H MAZ9082H MAZ9068H 10 102 Temperature coefficient of zener voltage SZ (mV / °C) Zener operating resistance RZ (Ω) MAZ9062H Zener current IZ (mA) 2 10 MAZ9120H 12 14 0 0.2 0.4 12 0.6 0.8 1.2 Ct VR 30 Ta = 25°C to 150°C Ta = 25°C MAZ9120H 10 25 8 MAZ9100H 6 MAZ9082H 4 MAZ9068H 2 0 1.0 Forward voltage VF (V) SZ IZ Ta = 25°C 1 8 Zener voltage VZ (V) RZ IZ 102 10 −1 1 10 −2 10 −3 Ambient temperature Ta (°C) 1 10 10 −1 Terminal capacitance Ct (pF) 0 10 −2 MAZ9100H 50 MAZ9082H 10 −1 MAZ9068H 100 1 MAZ9062H 150 Forward current IF (mA) 10 Zener current IZ (mA) Power dissipation PD (mW) 200 MAZ9062H 0 10 20 30 40 50 Zener current IZ (mA) SKE00008CED 20 MAZ9068H 15 MAZ9062H MAZ9082H 10 MAZ9100H 5 60 0 MAZ9120H 0 2 4 6 8 10 Reverse voltage VR (V) 12 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP