AX93280 Quick Installation Guide Note: Checklist Connect PD(Class 1): I/O board x1 Power cable x2 For +5VDC-in PICOxx1 series, 2.4A(5V) are left for other I/O function. LAN cable x1 Note: Please contact your local vendors if any damaged or missing items. DO NOT apply power to the board if there is any damaged component. For +12V DC-in PICOxx1 series, 2.6A(5V) are left for other I/O function. Connect PD(Class 2): For +5VDC-in PICOxx1 series, 1.5A(5V) are left for other I/O function. For +5VDC-in PICOxx1 series, 1.7A(5V) are left for other I/O function. CLASS USAGE 0 1 2 3 4 Type 1 Type 1 Type 1 Type 1 Type 2 MAXIMUM POWER LEVELSAT INPUT PD (W) 0.44 to 12.95 0.44 to 3.84 3.84 to 6.49 6.49 to 12.95 12.95 to 25.5 Connectors Connector Description CN1 CN2 LAN1 5V DC Power In Connector Ethernet Connector RJ-45 Ethernet Port Board Layout Top View Side View 4 94193280010E ©Copyright 2014 Axiomtek Co., Ltd. Version A1 July 2014 Printed in Taiwan 94193280010E ©Copyright 2014 Axiomtek Co., Ltd. Version A1 July 2014 Printed in Taiwan 1 AX93280 PoE-PSE Board Please check your Power Device (PD)’s power consumption. It is suggested to connect Class1 and 2 PD on PICOxx1 series. Quick Start Assembly Drawing The procedures required to power on PICOXX1 series with AX93280 installed: (1) (2) (3) (4) 2 94193280010E ©Copyright 2014 Axiomtek Co., Ltd. Version A1 July 2014 Printed in Taiwan Require at least 40W DC power adapter. Make sure that all necessary peripheral devices are plugged properly on PICOxx1 series. Connect the power connector (2 pin) on PICOXX1 series which provides +5V with DC Power In connector (CN1) on AX93280 via power cable. Connect the ethernet connector on PICOxx1 series with ethernet connector (CN2) on AX93280 via LAN cable. Following assembly drawing, install heatsink, heatspreader and AX93280 I/O board on PICOXX1 series. Press the system power switch to power on PICOXX1 series. Use Internet cable into LAN1 on AX93280 to a power device (PD) which complies with IEEE802.3af standard, such as IP camera. 94193280010E ©Copyright 2014 Axiomtek Co., Ltd. Version A1 July 2014 Printed in Taiwan 3