ELECTRICAL SOLUTIONS A. System Overview Wire End Holder • Secures wire ends while harness is being fabricated • Used with #28 thru #16 AWG wires • For indoor use only B1. Cable Ties .16 (4.1) .53 .77 (13.5) (20.0) .29 (7.4) B2. Cable Accessories 1.22 (31.0) B3. Stainless Steel Ties .18 (4.6) .37 (9.4) Part Number WEH-E8-C Material Acetal Color Black Std. Std. Pkg. Ctn. Mounting Qty. Qty. Method Two #8 (M4) Screws 100 1000 C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection Harness Board Nails • Speed routing of wires • Uniform driving depth is insured by a collar stop • Smooth finish on nails prevents abrasion to wire jackets • For indoor use only C4. Cable Management B C D1. Terminals A D2. Power Connectors Length A Overall Length Thickness B C Part Number HBN.75-T In. .75 mm 19.1 In. 1.40 mm 35.6 In. .07 mm 1.9 HBN1-T 1.00 25.4 1.65 41.9 .07 1.9 200 1000 HBN1.5-T 1.50 38.1 2.16 54.9 .08 2.1 200 1000 HBN2-T 2.00 50.8 2.66 67.6 .09 2.4 200 1000 HBN2.5-T 2.50 63.5 3.16 80.3 .11 2.8 200 1000 HBN3-T 3.00 76.2 3.67 93.2 .12 3.0 200 1000 HBN4-T 4.00 101.6 4.67 118.6 .14 3.7 200 1000 Material Nickel Plated Steel Mounting Method Std. Std. Pkg. Ctn. Qty. Qty. 200 1000 Hammered into harness board D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)