ISL1557A To request the full datasheet, please visit www.intersil.com/products/ISL1557A Data Sheet March 12, 2009 12V xDSL Differential Line Driver with Enhanced Output Protection FN6568.1 Features • 21dBm output power capability The ISL1557A is a dual operational amplifier designed for VDSL2 and ADSL line driving in DMT based solutions. This device features a high drive capability of 750mA while consuming only 6mA of supply current per amplifier and operating from a single 4.5V to 12V supply. The driver achieves a typical distortion of -80dBc, at 150kHz into a 25 load. ISL1557A is design with stronger output clamps to enhance protection against lightning transients. • Drives up to 750mA from a +12V supply • 20VP-P differential output drive into 21 • -80dBc typical driver output distortion at full output at 150kHz • -75dBc typical driver output distortion at 4MHz • -82dBc typical driver output distortion at 10MHz The ISL1557A is available in the thermally-enhanced 16 Ld QFN and 10 Ld HMSOP package and is specified for operation over the full -40°C to +85°C temperature range. The ISL1557A has control pins C0 and C1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application. • -79dBc typical driver output distortion at 17MHz The ISL1557A is ideal for ADSL2+, SDSL, HDSL2 and VDSL line driving applications, including both 14.5dBm and 21dBm applications. • Thermal shutdown • Low quiescent current of 6mA per amplifier • Supply range - For ISL1557AIUEZ 4.5V to 12V - For ISL1557AIRZ ±2.25V to ±6V, 4.5V to 12V • 300MHz bandwidth • Pb-free (RoHS compliant) Applications • VDSL2 line drivers • ADSL2+ CPE line driving • G.SHDSL, HDSL2 line drivers Ordering Information PART NUMBER (Note) PART MARKING TEMP. RANGE (°C) PACKAGE (Pb-Free) PKG. DWG. # ISL1557AIRZ 155 7AIRZ -40 to +85 16 Ld 4x4 QFN MDP0046 ISL1557AIRZ-T7* 155 7AIRZ -40 to +85 16 Ld 4x4 QFN (Tape and Reel) MDP0046 ISL1557AIUEZ BBBGA -40 to +85 10 Ld HMSOP ISL1557AIUEZ-T7* BBBGA -40 to +85 10 Ld HMSOP (Tape and Reel) MDP0050 MDP0050 *Please refer to TB347 for details on reel specifications NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2008, 2009. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. ISL1557A All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2 FN6568.1 March 12, 2009