Datasheet (PDF)

EL1032T Series
Industrial 10/100BASE-TX to 100BASE-FX Media Converter
with PoE/PSE
30W
PoE
Overview
The EL1032T Series provides media conversion between 10/100BASE-T(X) and 100BASE-FX Fiber. Through DIP switch
selection, Link-Fault-Pass-Through (LFPT) function can be active or disabled. EL1032T supports IEEE802.3at PoE/PSE
standard and can transmit power and data over one RJ45 cable. The EL1032T’s industrial design features high shock/
vibration resistance, electrical noise immunity and a wide operating temperature range from -10°C to 60°C. EL1032T is
the ideal media converter for industrial environments.
EtherWAN – “When Connectivity is Crucial”.
Spotlight
•Power over Ethernet
◦◦ Supports IEEE802.3at PoE/PSE standard and IEEE802.3af PoE/PSE compatible
•Dual Power Interfaces
◦◦ Supports both terminal block and DC jack for power input selections
•Industrial operating temperature range
◦◦ From -10°C to 60°C, wide operating temperature is suitable for outdoor cabinet installation
EL1032T
1
www.EtherWAN.com
rev. A1.1
Hardware Specifications
Technology
Environment
Standards
Operating Temperature
•-10°C to 60°C (14°F to 140°F)
Tested @ -20°C to 70°C (-4°F to 158°F)
•IEEE802.3 10BASE-T
•IEEE802.3u 100BASE-TX/FX
•IEEE802.3af/at PoE/PSE
Storage Temperature
•-40°C to 85°C (-40°F to 185°F)
Forward and Filtering Rate
•14,880pps for 10Mbps
•148,810pps for 100Mbps
Ambient Relative Humidity
•5% to 95% (non-condensing)
Packet Buffer Memory
Regulatory Approvals
•228Kb
ISO
Processing Type
•Manufactured in an ISO9001 facility
•Store-and-Forward
•Auto Negotiation
•Half-duplex back-pressure and IEEE802.3x full-duplex flow
control
•Auto MDI/MDIX
EMI
FCC Part 15B, Class A
EN61000-6-4
EN55022
EMS
EN61000-6-2
Power
Input Voltage
•48 to 57VDC
Power Consumption
•EN61000-4-2 (ESD Standards)
•EN61000-4-3 (Radiated RFI Standards)
•EN61000-4-4 (Burst Standards)
•EN61000-4-5 (Surge Standards)
•EN61000-4-6 (Induced RFI Standards)
•EN61000-4-8 (Magnetic Field Standards)
•Device: Max. 3.6W (without PoE)
•PoE power budget: 30W Max. (depends on power input)
PoE Power Output
•IEEE802.3at: up to 30W/port, 50-57VDC, 500mA Max.
Protection
Envronmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)
IEC60068-2-27 Ea (Shock)
FED STD 101C Method5007.1 (Free fall w/ package)
•Overload current protection
•Reverse polarity protection
Mechanical
Casing
•Aluminum Case
Dimensions
•70mm (W) x 110mm (D) x 30mm (H)
(2.76" (W) x 4.33" (D) x 1.18" (H))
Weight
•0.25Kg (0.55lb.)
Installation
•DIN-Rail (top hat type 35mm), Panel, or Wall mounting
Interface
Ethernet Port
•10/100BASE-TX: 1 port
•100BASE-FX: 1 port
LED Indicators
•Per Unit: Power
•Per 10/100TX Port : Link/ACT, full-duplex/collision
•Per 100FX Port : Link/ACT
•PoE: PD connect/PD disconnect
EL1032T
2
www.EtherWAN.com
rev. A1.1
Application Diagram
EX78000
PoE/PSE IEEE802.3af Switch
5
RJ4
RJ4
5
PoE IP Camera
Fiber (120Km)
EL1032T
PoE/PSE
30mm
(1.18”)
Dimensions
70mm (2.76”)
Front
Left Side
110mm (4.33”)
Top
Right Side
Bottom
EL1032T
3
www.EtherWAN.com
rev. A1.1
Ordering Information
Model
EL1032T-X0B
Industrial 10/100BASE-TX to 100BASE-FX media converter with IEEE802.3af 15.4W and IEEE802.3at 30W PoE/PSE
* DIN-Rail mounting kit included
100FX Fiber Options (X)
1
Multi Mode (SC)
2
Multi Mode (ST)
A
Single Mode (SC) - 20Km (1310nm)
B
Single Mode (SC) - 40Km (1310nm)
H
Single Mode (ST) - 20Km (1310nm)
6
Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km
7
Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km
8
Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km
9
Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km
P
Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km
Q
Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km
R
Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km
S
Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km
* More 100FX Fiber options also available upon request
Optional Accessories
DR-75-48
75W/1.6A DIN-Rail 48VDC Industrial Power Supply (for terminal block)
MDR-40-48
40W/0.83A 48VDC Industrial Power Supply (for terminal block)
DD-85-48
85W/1.78A 48VDC industrial Power Supply (for terminal block)
DD-85-55
85W/1.78A 55VDC Industrial Power Supply (for terminal block)
GS120A-48
120W/2.5A 48VDC Power Adapter with latched DC jack in plastic housing (for DC jack)
EL1032T
4
www.EtherWAN.com
rev. A1.1