Multiple Channel Media Converters EMC400 4-Bay Commercial Media Converter Chassis Overview The EMC400, 4-slot Din-Rail mount chassis brings Flexibility, Reliability and Redundancy to mission critical network infrastructures. Its flexible design allows for a variety of EtherWAN Media Converters and Ethernet Extenders to be combined into one chassis giving users a solution that fits the needs of each individual network installation. Designed with dual power inputs, the EMC400 allows for two separate power sources to increase reliability and dependability eliminating the single point of failure of a single power source. With its hot swappable design, the EMC400 allows existing communications to remain uninterrupted during the simple installation of EtherWAN Media Converters and Ethernet Extenders. In addition, the EMC400 incorporates Electrical Isolation with fused overcurrent protection between devices within its chassis. With its solid metal enclosure, DIN-Rail mount design, and hot swappable technology, the EMC400 is the ideal solution for reliably interconnecting separated network media and pushing Ethernet beyond its boundaries. EtherWAN – “When Connectivity is Crucial.” Spotlight •Hot-Swap Installation ◦◦ Hot-swappable installation of Media Converters and Ethernet Extenders. •4-Slot DIN-Rail Chassis ◦◦ Supports redundant terminal block power inputs. •Supports EtherWAN's Ethernet Extenders and Media Converters ◦◦ Supported models include EL2321, EL2211, EL2315, EM1100/EM2100, EM1000/EM2000, EM1000S/EM2000S, EM1020, EM120, EL100/EL200, EL110/EL210, ED3331 and ED3501 series. EMC400 1 www.EtherWAN.com rev. A4.2 Hardware Specifications Power Environment Input Operating Temperature •Power supply input: 90 - 264VAC •EMC400 chassis input: 12VDC •-20°C to 60°C (-4°F to 140°F) Storage Temperature Wiring •-20°C to 70°C (-4°F to 158°F) •Minimum cable AWG: 16 AWG Ambient Relative Humidity Power Consumption •5% to 95% (non-condensing) •Max. 19W@ Full installation, depending on installed devices Regulatory Approvals Protection ISO •Over current protection •Manufactured in an ISO9001 facility Mechanical EMI FCC Part 15B, Class A EN61000-6-4 Casing •Steel Electrogalvanized ColdRolled Coil (SECC) Dimensions •EN55022 •130mm(W) x 164mm(D) x 92.1mm(H) (5.12"(W) x 6.46"(D) x 3.63"(H)) EMS EN61000-6-2 EN61000-4-2 (ESD Standards) EN61000-4-3 (Radiated RFI Standards) EN61000-4-4 (Burst Standards) EN61000-4-5 (Surge Standards) EN61000-4-6 (Induced RFI Standards) EN61000-4-8 (Magnetic Field Standards) Weight •1.37kg (3.02lb) Installation •DIN-Rail Interface LED Indicators • 1: On, power input 1 is connected Off, power input 1 is disconnected • 2: On, power input 2 is connected Off, power input 2 is disconnected Environmental Test Compliance IEC60068-2-6 Fc (Vibration) IEC60068-2-27 Ea (Shock) IEC60068-2-32 Ed (Free fall) Application Diagram The EMC400 provides easy DIN-Rail installation and multiple media conversions. CoaxialCable Fiberoptic Cat.5 Ethernet Tele phone Wire SC/ST Fiber RJ45 SFP Fiber RJ45 RJ11 RJ45 Coaxial Cable RJ45 EMC400 EMC400 Managed Switch 2 www.EtherWAN.com rev. A4.2 Dimensions 92.1mm (3.63”) 130mm (5.12”) Front Side Back 164mm (6.46”) 139mm (5.47”) 146.5mm (5.75”) Top Ordering Information Model EMC400-EPWS 4-Slot DIN-Rail Media Converter Chassis with two DR-30-12 Power Supplies in the Package EMC400 4-Slot DIN-Rail Media Converter Chassis * DIN-Rail mounting kit is included EMC400 3 www.EtherWAN.com rev. A4.2