Q2L Series SIDACtor® Device Data Sheets The Q2L SIDACtor series provides bidirectional transient voltage protection in a low profile, chip scale package. The small package QFN (Quad Flatpak No-Lead) is ideal for dense board applications such as line cards, modems, phones, fax machines, and other telecommunication equipment. PIN 1 PIN 2 Features: Protection solution to meet: • RoHS compliant • Chip Scale Package (CSP) sizing • Wide range of IPP ratings including: • • • • • • • 75A for 5x310/10x700µs ITU/YDT waveform 80A for 10x1000µs GR 1089 waveform 100A for 10x560µs TIA-968 • Bidirectional transient voltage protection • Small footprint (QFN) • Teccor® brand SIDACtor technology • Recognized under UL E133083 file number YD/T 950 YD/T 993 YD/T 1082 GR 1089 Inter-building IEC 61000-4-5 ITU K.20/21 TIA/EIA-IS-968 Basic Recommendations Electrical Parameters Part Number Marking XXXX VDRM @ldrm=5µA VS @100V/µs IH IS IT VT @IT=1 amp Volts Volts mAmps mAmps Amps Volts Min Max Min Capacitance @1MHz, 2V bias pF Max Min Max P0080Q12ALRP P-8A 6 25 50 800 2.2 5 25 55 P0300Q12ALRP P03A 25 40 50 800 2.2 5 15 35 P0640Q12ALRP P06A 58 77 150 800 2.2 5 40 60 P0720Q12ALRP P07A 65 88 150 800 2.2 5 40 60 P0900Q12ALRP P09A 75 98 150 800 2.2 5 35 55 P1100Q12ALRP P11A 90 130 150 800 2.2 5 30 50 P1300Q12ALRP P13A 120 160 150 800 2.2 5 25 45 P1500Q12ALRP P15A 140 180 150 800 2.2 5 25 40 P1800Q12ALRP P18A 170 220 150 800 2.2 5 25 35 P2300Q12ALRP P23A 190 260 150 800 2.2 5 25 35 P2600Q12ALRP P26A 220 300 150 800 2.2 5 25 35 P3100Q12ALRP P31A 275 350 150 800 2.2 5 20 35 P3500Q12ALRP P35A 320 400 150 800 2.2 5 20 30 P0080Q12BLRP P08B 6 25 50 800 2.2 5 25 55 P0300Q12BLRP P03B 25 40 50 800 2.2 5 15 35 P0640Q12BLRP P06B 58 77 150 800 2.2 5 40 60 P0720Q12BLRP P07B 65 88 150 800 2.2 5 40 60 P0900Q12BLRP P09B 75 98 150 800 2.2 5 35 55 P1100Q12BLRP P11B 90 130 150 800 2.2 5 30 50 P1300Q12BLRP P13B 120 160 150 800 2.2 5 25 45 P1500Q12BLRP P15B 140 180 150 800 2.2 5 25 40 P1800Q12BLRP P18B 170 220 150 800 2.2 5 25 35 P2300Q12BLRP P23B 190 260 150 800 2.2 5 25 35 P2600Q12BLRP P26B 220 300 150 800 2.2 5 25 35 P3100Q12BLRP P31B 275 350 150 800 2.2 5 20 35 P3500Q12BLRP P35B 320 400 150 800 2.2 5 20 30 • All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range. • IPP is a repetitive surge rating and is guaranteed for the life of the product. • Listed SIDACtor devices are bidirectional. All electrical parameters and surge ratings apply to forward and reverse polarities. www.littelfuse.com • +1 (800) 999-9445 1 • VS is measured at 100 V/µs. • Off-state capacitance is measured at 1MHz with a 2 V bias and is a typical value for "A" and "B" rated product. ©2005 Littelfuse • Telecom Design Guide Q2L Series SIDACtor® Device Surge Ratings Series Ipp ITSM di/dt 2x10µs 1.2x50µs/8x20µs 10x160µs 10x560µs 10x1000µs AC 60Hz Amps Amps Amps Amps Amps Amps Amps/µs Min Min Min Min Min Min Max A 150 150 90 50 45 20 500 B 250 250 150 100 80 20 500 Package Symbol Parameter Value Unit QFN TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C R0JA Thermal Resistance: Junction to Ambient 120 °C/W PIN 2 PIN 1 V-I: Characteristics Data Sheets Thermal Considerations V-I: Pulse Wave-form IT IS IH IDRM -V +V VT VDRM VS IPP – Peak Pulse Current – %IPP +I Peak Value 100 tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 tr td t – Time (µs) -I 14 12 10 IH 8 6 25 ˚C 4 2 IH (TC = 25 ˚C) V-I: Holding Current/Case Temperature Ratio of Percent of VS Change – % V-I: Junction Temperature 0 -4 -6 -8 -40 -20 0 2.0 1.8 1.6 1.4 25 ˚C 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) – ˚C 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – ˚C www.littelfuse.com • +1 (800) 999-9445 2 ©2005 Littelfuse • Telecom Design Guide Can be A or B Q2L Series SIDACtor® Device Part Numbering Device Marking Can be A or B Pxxx0Q12ALRP PACKING STYLE RP : Standard: Embossed carrier tape and reel per EIA 481-1, 12mm tape in 13” reel. DEVICE TYPE P : SIDACtor XXXX YYYY MEDIAN VOLTAGE xxx : xxx volts CONSTRUCTION VARIATION 0 : Single SIDACtor chip used as a single device First Line: Product Name Second Line: Lot number L : RoHS Compliant SURGE Ipp Rating A : 50AMP 10x560µs B : 100AMP 10x560µs BOTTOM VIEW TOP VIEW PACKAGE TYPE C Q12 : QFN, 3.0mm x 3.0mm, E two leaded package A Data Sheets J Mechanical Drawings and Recommended Solder B F Pad Outline BOTTOM VIEW TOP VIEW C A E J END VIEW H B N2 N1 N2 N1 K2 M2 END VIEW 1.27 (.050”) F M1 K1 H 1.50 (.059”) SIDE VIEW M1 K1 M2 2.54 (.100”) 1.50 (.059”) SIDE VIEW Recommended Soldering 2.54 Pad Outline (Reference Only) (.100”) 1.27 *Reference Tech Brief (.050”) (EC642) for soldering recommendations K2 Recommended Soldering Pad Outline (Reference Only) Mechanical Dimensions Dimensions Inches Millimeters Min Typ Max Min Typ Max A 0.114 0.118 0.122 2.900 3.000 3.100 B 0.114 0.118 0.122 2.900 3.000 3.100 C 0.075 0.079 0.083 1.900 2.000 2.100 E 0.011 0.015 0.019 0.285 0.385 0.485 F 0.076 0.080 0.084 1.930 2.030 2.130 H 0.035 0.039 0.043 0.900 1.000 1.100 J 0.000 0.004 0.008 0.000 0.100 0.200 K1 0.004 0.008 0.012 0.100 0.200 0.300 K2 0.004 0.008 0.012 0.100 0.200 0.300 M1 0.056 0.060 0.064 1.430 1.530 1.630 M2 0.038 0.042 0.046 0.970 1.070 1.170 N1 0.096 0.100 0.104 2.440 2.540 2.640 N2 0.082 0.086 0.090 2.080 2.180 2.280 www.littelfuse.com • +1 (800) 999-9445 3 ©2005 Littelfuse • Telecom Design Guide C A D N W1 Q2L Series SIDACtor® Device B Reel Dimension Tape and Reel Dimensional Drawings D0 C A P0 P2 T D CARRIER TAPE E1 D1 B0 N W0 W1 B F E2 W K0 P1 A0 COVER TAPE Reel Dimension Tape Dimension Items P0 P2 CARRIER TAPE E1 D1 CARRIER TAPE COVER TAPE END B0 W0 K0 P1 F START E2 W TRAILER 160mm MIN A0 LEADER 400mm MIN COVER TAPE Tape Leader and Trailer Dimensions Tape Dimension Items CARRIER TAPE Tape and Reel Dimensions COVER TAPE END START Symbols TRAILER A 160mm MIN B Description Reel Diameter LEADER 400mm MIN Drive Spoke Width Hole Diameter Tape CLeader and Trailer Arbor Dimensions Inches Millimeters Minimum Maximum Minimum Maximum N/A 12.992 N/A 330.0 0.059 N/A 1.50 N/A 0.504 0.531 12.80 13.50 N/A D Drive Spoke Diameter 0.795 N/A 20.20 N Hub Diameter 1.969 N/A 50.00 N/A W1 Reel Inner Width at Hub 0.488 0.567 12.40 14.40 A0 Pocket Width at bottom 0.126 0.134 3.20 3.40 B0 Pocket Length at bottom 0.126 0.134 3.20 3.40 D0 Feed Hole Diameter 0.059 0.063 1.50 1.60 D1 Pocket Hole Diameter 0.059 N/A 1.50 N/A E1 Feed hole position 1 0.065 0.073 1.65 1.85 E2 Feed hole position 2 0.400 0.408 10.15 10.35 F Feed hole center-Pocket hole 0.215 0.219 5.45 5.55 K0 Pocket Depth 0.039 0.051 1.00 1.30 P0 Feed Hole Pitch 0.153 0.161 3.90 4.10 P1 Component Spacing 0.311 0.319 7.90 8.10 P2 Feed hole center-Pocket hole 0.077 0.081 1.95 2.05 T Carrier Tape Thickness 0.010 0.014 0.25 0.35 W Embossed Carrier Tape Width 0.453 0.484 11.50 12.30 W0 Cover Tape Width 0.358 0.366 9.10 9.30 www.littelfuse.com • +1 (800) 999-9445 4 ©2005 Littelfuse • Telecom Design Guide Data Sheets D0 T