BAP1321-02 Silicon PIN diode Rev. 02 — 3 January 2008 Product data sheet IMPORTANT NOTICE Dear customer, As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below. http://www.philips.semiconductors.com use http://www.nxp.com http://www.semiconductors.philips.com use http://www.nxp.com (Internet) [email protected] use [email protected] (email) The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version) - © Koninklijke Philips Electronics N.V. (year). All rights reserved is replaced with: - © NXP B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via [email protected]). Thank you for your cooperation and understanding, NXP Semiconductors NXP Semiconductors Product specification Silicon PIN diode BAP1321-02 FEATURES PINNING • High voltage, current controlled PIN • RF resistor for RF attenuators and switches • Low diode capacitance • Low diode forward resistance • Very low series inductance • For applications up to 3 GHz. handbook, halfpage APPLICATIONS 1 cathode 2 anode 1 Top view • RF attenuators and switches. DESCRIPTION 2 MAM405 Marking code: K7. DESCRIPTION Planar PIN diode in a SOD523 ultra small SMD plastic package. Fig.1 Simplified outline (SOD523) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER VR continuous reverse voltage IF continuous forward current Ptot total power dissipation Tstg Tj CONDITIONS MIN. − MAX. 60 UNIT V − 100 mA − 715 mW storage temperature −65 +150 °C junction temperature −65 +150 °C Ts ≤ 90 °C Rev. 02 - 3 January 2008 2 of 7 NXP Semiconductors Product specification Silicon PIN diode BAP1321-02 ELECTRICAL CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT VF forward voltage IF = 50 mA 0.95 1.1 V IR reverse leakage current VR = 60 V − 100 nA Cd diode capacitance VR = 0; f = 1 MHz 0.4 − pF VR = 1 V; f = 1 MHz 0.35 0.45 pF VR = 20 V; f = 1 MHz 0.25 0.32 pF rD diode forward resistance f = 100 MHz; note 1 IF = 0.5 mA 3.4 5.0 Ω IF = 1 mA 2.4 3.6 Ω IF = 10 mA 1.2 1.8 Ω 0.85 1.3 Ω VR = 0; f = 900 MHz 16.3 − dB VR = 0; f = 1800 MHz 11.4 − dB VR = 0; f = 2450 MHz 9.2 − dB IF = 100 mA |s21|2 |s21|2 |s21|2 |s21|2 |s21|2 isolation insertion loss insertion loss insertion loss insertion loss IF = 0.5 mA; f = 900 MHz 0.23 − dB IF = 0.5 mA; f = 1800 MHz 0.27 − dB IF = 0.5 mA; f = 2450 MHz 0.33 − dB IF = 1 mA; f = 900 MHz 0.18 − dB IF = 1 mA; f = 1800 MHz 0.22 − dB IF = 1 mA; f = 2450 MHz 0.27 − dB IF = 10 mA; f = 900 MHz 0.10 − dB IF = 10 mA; f = 1800 MHz 0.16 − dB IF = 10 mA; f = 2450 MHz 0.20 − dB IF = 100 mA; f = 900 MHz 0.08 − dB IF = 100 mA; f = 1800 MHz 0.13 − dB IF = 100 mA; f = 2450 MHz 0.18 − dB τL charge carrier life time when switched from IF = 10 mA to IR = 6 mA; RL = 100 Ω; measured at IR = 3 mA 0.5 − µs LS series inductance IF = 100 mA; f = 100 MHz 0.6 − nH Note 1. Guaranteed on AQL basis: inspection level S4, AQL 1.0. THERMAL CHARACTERISTICS SYMBOL Rth j-s PARAMETER thermal resistance from junction to soldering point Rev. 02 - 3 January 2008 VALUE UNIT 85 K/W 3 of 7 NXP Semiconductors Product specification Silicon PIN diode BAP1321-02 GRAPHICAL DATA MLD591 10 MLD592 500 Cd handbook, halfpage handbook, halfpage rD (Ω) (fF) 400 300 1 200 100 10−1 10−1 10 1 IF (mA) 8 4 0 12 16 20 VR (V) f = 100 MHz; Tj = 25 °C. Fig.2 0 102 f = 1 MHz; Tj = 25 °C. Forward resistance as a function of forward current; typical values. Fig.3 MLD595 0 Diode capacitance as a function of reverse voltage; typical values. MLD594 0 handbook, halfpage s 2 handbook, halfpage s 2 21 (dB) 21 (1) (dB) −0.1 −10 (2) (3) −0.2 (4) −20 −0.3 −30 −0.4 −0.5 0 1 (1) IF = 100 mA. (2) IF = 10 mA. 2 f (GHz) 3 0 1 2 f (GHz) 3 (3) IF = 1 mA. (4) IF = 0.5 mA. Diode inserted in series with a 50 Ω stripline circuit and biased via the analyzer Tee network. Tamb = 25 °C. Fig.4 −40 Diode zero biased and inserted in series with a 50 Ω stripline circuit. Tamb = 25 °C. Insertion loss (|s21|2) of the diode as a function of frequency; typical values. Fig.5 Isolation (|s21|2) of the diode as a function of frequency; typical values. Rev. 02 - 3 January 2008 4 of 7 NXP Semiconductors Product specification Silicon PIN diode BAP1321-02 PACKAGE OUTLINE Plastic surface-mounted package; 2 leads SOD523 A c v M A HE A D 1 E 0 0.5 1 mm scale 2 DIMENSIONS (mm are the original dimensions) bp (1) UNIT A bp c D E HE v mm 0.65 0.58 0.34 0.26 0.17 0.11 1.25 1.15 0.85 0.75 1.65 1.55 0.1 Note 1. The marking bar indicates the cathode. OUTLINE VERSION SOD523 REFERENCES IEC JEDEC JEITA SC-79 Rev. 02 - 3 January 2008 EUROPEAN PROJECTION ISSUE DATE 02-12-13 06-03-16 5 of 7 BAP1321-02 NXP Semiconductors Silicon PIN diode Legal information Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. Contact information For additional information, please visit: http://www.nxp.com For sales office addresses, send an email to: [email protected] Rev. 02 - 3 January 2008 6 of 7 BAP1321-02 NXP Semiconductors Silicon PIN diode Revision history Revision history Document ID Release date Data sheet status Change notice Supersedes BAP1321-02_N_2 20080103 Product data sheet - BAP1321-02_1 - - Modifications: BAP1321-02_1 (9397 750 08131) • Package outline drawing on page 5 changed 20010417 Product specification Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 3 January 2008 Document identifier: BAP1321-02_N_2