Cable Management Systems Cable ladder Cable ladder Delivering world class solutions in cable management. Introduction Thomas & Betts is a global leader in the design, development and supply of cable support and management solutions. From Ty-Rap® cable ties to complete cable tray systems, Thomas & Betts products are renowned for delivering robust, reliable and high performance solutions to the electrical marketplace. With a long history of excellence and innovation, Thomas & Betts products offer the complete solution to your electrical needs. Thomas & Betts is now manufacturing cable tray systems, including cable ladder, perforated tray, channel tray and strut (metal framing), directly from our new production facility at Dammam in Saudi Arabia. Combining local manufacture and distribution with an extensive product range, this facility ensures we can effectively support customer demand and respond rapidly to project timelines for all types of installation across the Middle East. So, whether specifying a major new project, or simply refurbishing existing facilities, choose Thomas & Betts cable tray to deliver the most effective, reliable and long lasting support for your cabling needs. Thomas & Betts cable ladder is ideal for a wide range of commercial, industrial & public sector projects: Commercial Public sector ● Offices & retail centres ● Schools & universities ● Hotels & resorts ● Hospitals & healthcare ● Stadia & concert halls ● Government buildings Industrial Infrastructure ● Automotive plants ● Airports ● Food processing ● Rail terminals ● Pharmaceutical & manufacturing ● Tunnels Oil & Gas Utilities ● Petrochemical plants ● Power stations ● Oil & Gas refineries ● Water treatment facilities ● Offshore platforms Introduction Cable ladder Thomas & Betts cable ladder offers significant advantages over conduit pipe and other wiring systems. Cable ladder is a more reliable, less expensive solution for supporting cable, which is easier to maintain, proves more adaptable to changing needs, and is more suitable for harsh and corrosive environments. In specifying T&B cable ladder, you will be choosing a highly versatile solution which delivers quality and performance over the long term. Extensive product range Enhanced safety Thomas & Betts cable ladder is available in aluminium or steel with a range of finishes. Cable ladder proves much safer than conduit installation, with lower risk of exposure to live, energised parts. Straight sections can be ordered in a variety of lengths and bottom styles, and are accompanied by an extensive selection of fittings, covers and accessories to ensure all installation needs are covered. In a cable ladder system, cables can be pulled from near one termination enclosure to the next before being connected, rather than being pulled through the conduit after the cable is terminated. Increased adaptability Reduced costs More than ever, businesses must have flexibility - to expand facilities quickly, to introduce new processes or product lines as demand dictates. The adaptability, reliability and ease of maintenance of T&B cable ladder result in many types of cost saving, including: A major advantage of cable ladder is its adaptability to meet new needs and technology. ● Lower installation, engineering and maintenance costs ● Lower need to reconfigure the system as needs change ● Reduced downtime for electrical and data handling systems Contents Fewer environmental problems resulting from loss of power to essential equipment Introduction to cable ladder 4-5 Straight section 6-7 System modification, redesign or expansion is a simple task because cables can enter or exit the ladder at any point. There is no need to replace the entire system, ensuring minimal disruption to site activity. ● Low maintenance First class support Cable ladder wiring systems have a lower maintenance demand than conduit systems. Thomas & Betts combines global market leadership with local product & technical support, either through our network of distributors, or via our T&B sales office in Dubai and our production facility at Dammam. When maintenance is necessary, it proves easier, less labour intensive, and requires less time to complete. Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Fittings 8 - 15 Covers 16 - 20 Accessories 21 - 31 Superstrut® 32 - 33 Additional solutions 34 - 35 Imperial to metric conversion chart 35 3 Cable ladder Thomas & Betts cable ladder is available in four material types and three bottom types, for maximum versatility. Material types Introduction Aluminium (to 6063 T6) Aluminium 6063 T6 alloy for lightweight construction, excellent corrosion resistance, and high strength-to-weight ratio. Aluminium cable ladder offers simple installation and low maintenance. Pre-galvanized steel (to BS EN 10142 & BS EN 10143) ● Aluminium Steel is ideal as a high strength, low cost material for cable ladder. ● Steel (pre-galvanized, hot dip galvanized & stainless steel) Pre-galvanized steel ladder is produced by passing low-carbon steel through molten zinc before fabrication, and is generally recommended for indoor commercial applications rather than outdoor or industrial environments. Bottom types ● Ladder ● Ventilated ● Solid trough Hot dip galvanized steel (to BS EN ISO 1461) Hot dip galvanized steel ladder is produced by immersing fabricated ladder in molten zinc, creating a much thicker coating than pre-galvanized. This process is recommended for most outdoor and harsh industrial applications. Stainless steel (to AISI Type 316 or 304) Stainless steel offers high strength and high resistance to chemicals, even at high ambient temperatures. T&B stainless steel cable ladder is roll-formed from AISI Type 316 stainless steel as standard, with Type 304 stainless steel available to special order. Ladder Longitudinal rungs are welded to extruded siderails for maximum structural strength. Rungs are extra wide for maximum cable bearing, and have continuous open slot for strut pipe clamps and barrier strip adjustability. Every second rung is reversed for easy top or bottom mounting of cable ties and clamps, with exclusive Ty-Rap® slots on 1” centres. This ensures cables can be secured without kinks and keeps cables uniform. Ventilated Comprising longitudinal rails and a bottom with openings sufficient for the passage of air. Rungs are extra wide for maximum cable bearing, and have continuous open slot for strut pipe clamps and barrier strip adjustability. Every second rung is reversed for easy top or bottom mounting of cable ties and clamps, with exclusive Ty-Rap® slots on 1” centres. This ensures cables can be secured without kinks and keeps cables uniform. Solid trough A fabricated structure consisting of a bottom without ventilation openings within separate longitudinal siderails. Rungs are not alternated (up/down), however have perforations and, where necessary, Ty-Raps® can be inserted diagonally between rung and bottom sheet for cable fastening. This design offers added cable protection. 4 Note: cable ladder edges and welds are rounded and smoothed during manufacture to prevent cable damage. Care should be taken when handling cable ladder and protective gloves should be worn to avoid risk of injury. Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Introduction Cable ladder Thomas & Betts cable ladder delivers the complete, versatile solution for cable management, with straight sections, fittings, and covers etc., developed to overcome the design constraints found in all kinds of buildings and locations. Straight section Fittings Pre-fabricated steel or aluminium sections with siderails connected by transverse rungs. Including bends, reducers, wyes, tees and crosses, fittings enable a cable ladder system to change direction, elevation or size to meet building design/cable run constraints. Available in a range of materials, lengths and bottom types to cover all installation options. T&B aluminum cable ladder is composed of two distinct systems H-style & U-style. Supplied complete with 7” splice plates for connection to fittings, other sections etc. (aluminium splice plates ‘snap-in’ for easy installation). These systems are interchangeable. Covers Accessories Available for all cable ladder widths and material types, covers provide mechanical protection and should be installed where falling objects may damage cables or where vertical cable ladder runs are accessible by pedestrian or vehicular traffic. A complete line of accessories and supports to supplement the function of straight sections and fittings, including drop-outs, hold down clamps, splice plates, barrier strips, and Superstrut® support solutions. Barrier strips are fully adjustable (side to side) for use in straight sections and fittings. Styled as solid, ventilated or peaked, for varying installation needs. Straight sections and fittings provide the flexibility to allow cable ladder installations to follow cable runs which are either planned for new projects or already exist in buildings, as shown in the illustration right. C G H E D I L P A Barrier strip B Box connector C Flat cover D Horizontal cross E Horizontal 45° F Horizontal 90° G Horizontal tee H Ladder section I Peaked cover J Right reducer K Solid trough section L Splice plate Q N F K A O J M M Solid channel tray N Ventilated section O Vertical 90º outside P Vertical 90º inside Q Vertical tee Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com B 5 Cable ladder Straight section Aluminium Straight section Pre-fabricated aluminium section with siderails connected by rungs. Pre-fabricated steel section with siderails connected by rungs. Features Features ● 6063 T6 Aluminium alloy construction ● H-beam siderail design with nominal height 4” to 7” ● Loading height 3” to 6” ● Extra wide rung design with continuous open slot, reverse position every second rung and Ty-Rap® cable tie slots (5/8” x 5/8”) on 1” centres Straight sections are available in aluminium, or steel in a range of finishes. Straight sections utilize a 7” splice plate and the fittings have tangents at the extremities. This style offers enhanced aesthetics and rigidity to the end-user. Steel ● Choice of pre-galvanized, hot dip galvanized or type 316 stainless steel (type 304 stainless steel to special order) ● Nominal siderail height 3 5/8” to 7” ● Loading height 2 5/8” to 6” ● Extra wide rung design with continuous open slot, reverse position every second rung and Ty-Rap® cable tie slots (5/8” x 5/8”) on 1” centres ● Snap-in splice plates included with straight section ● Choice of two styles of fitting siderail (U-style & H-style) ● Splice plates included with straight section 1. Select the material best suited to the installation environment 4. Specify the bottom type based on the cables/spacing required 2. Define the ladder series to NEMA class/loadings (see tables below for aluminium/steel loadings) 5. Establish the length of cable ladder in metres or inches 3. Select the nominal siderail height (depth) and width of ladder Product selection - straight section Straight section part numbers are created using a range of selection criteria. Determine the most suitable cable ladder type based on the parameters 1 - 5 shown right, then use the tables on the following page to create the exact part number for your needs. Load rating/NEMA Class - aluminium Siderail height 4” 5” 6” 6 7” Series Load depth (nominal) NEMA Class MAH-0-4 MAH-1-4 MAH-2-4 MAH-3-4 MAH-4-4 MAH-5-4 3” MAH-2-5 MAH-3-5 MAH-4-5 4” MAH-0-6 MAH-1-6 MAH-2-6 MAH-3-6 MAH-4-6 MAH-5-6 MAH-6-6 5” MAH-2-7 MAH-2C-7 MAH-3-7 6” Note: All straight section types are suitable for use with both U-style and H-style fitting systems. Load rating/NEMA Class - steel Load lb/ft kg/m Span ft m Siderail height 8B 12A 12B 12C 20A 20B 75 50 75 100 50 75 112 74 112 149 74 112 8 12 12 12 20 20 2.4 3.7 3.7 3.7 6.0 6.0 12C 20A 20B 100 50 75 149 74 112 12 20 20 3.7 6.0 6.0 12B 12C 20A 20B 20C 20C 20C 75 100 50 75 100 100 100 112 149 74 112 149 149 149 12 12 20 20 20 20 20 3.7 3.7 6.0 6.0 6.0 6.0 6.0 20B 20C 20C 75 100 100 112 149 149 20 20 20 6.0 6.0 6.0 Series Load depth (nominal) NEMA Class Load lb/ft kg/m Span ft m 3 5/8” MS*-1-3 2 5/8” 12A 50 74 12 3.7 4” MS*-1-4 MS*-3-4 3” 12C 20A 100 50 149 74 12 20 3.7 6.0 5” MS*-2-5 MS*-4-5 MS*-5-5 4” 20A 20B 20C 50 75 100 74 112 149 20 20 20 6.0 6.0 6.0 6” MS*-0-6 MS*-1-6 MS*-3-6 MS*-4-6 5” 12C 20A 20B 20C 100 50 75 100 149 74 112 149 12 20 20 20 3.7 6.0 6.0 6.0 7” MS*-3-7 6” 20C 100 149 20 6.0 Replace * with letter reference for material type: P = Pre-galvanized Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com H = Hot dip galvanized S = Stainless steel 316 Straight section Cable ladder Straight section - aluminium Select the preferred component parts and create the specific part number as per the example shown. Material MAH I Aluminium Series 0 1 2 3 4 5 I I I I I I Series 0* Series 1** Series 2 Series 3 Series 4 Series 5 2 I Series 2 3 I Series 3 4 I Series 4 * Series 0 is not available in 24 ft or 6 m lengths. ** Series MAH-1-4 is not available in 24 ft or 6 m lengths. Siderail height 4 I 4” 5 I 5” Ladder width Bottom type Length 06 I 6” L06 I 6” rung spacing 144 I 12 ft 09 I 9” L09 I 9” rung spacing 288 I 24 ft 12 I 12” L12 I 12” rung spacing 18 I 18” V I Ventilated 24 I 24” S I Solid trough 3 I 3m 6 I 6m 30 I 30” 36 I 36” Series 0* Series 1 Series 2 Series 3 Series 4 Series 5 Series 6 6 I 6” 2 I Series 2 2C I Series 2C 3 I Series 3 7 I 7” 0 1 2 3 4 5 6 I I I I I I I MAH-1-6-24-L09-144 Straight section - steel Select the preferred component parts and create the specific part number as per the example shown. Material Series Siderail height MSP I Pre-galvanized steel 1 I Series 1** 3 I 3 5/8” MSH I Hot dip galvanized steel MSS I Stainless steel 316* * MSP-1-6-24-L09-144 Stainless steel 304 is available to special order. ** Series 1-3, 1-4 and 0-6 is not available in 24 ft or 6 m lengths. 1 I Series 1** 3 I Series 3 4 I 4” 2 I Series 2 4 I Series 4 5 I Series 5 5 I 5” 0 1 3 4 6 I 6” I I I I Series 0** Series 1 Series 3 Series 4 3 I Series 3 Ladder width Bottom type Length 06 I 6” L06 I 6” rung spacing 144 I 12 ft 09 I 9” L09 I 9” rung spacing 288 I 24 ft 12 I 12” L12 I 12” rung spacing 18 I 18” V I Ventilated 24 I 24” S I Solid trough 3 I 3m 6 I 6m 30 I 30” 36 I 36” 7 I 7” Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com 7 Cable ladder Fittings U-Style fitting (Aluminium/steel) Fittings Fittings enable a cable ladder system to change direction, elevation or size in order to meet building design and cable run constraints. Fittings constructed with the siderail flanges on the inside only, creating a U-shaped fitting style. Fittings constructed with the siderail having inner and outer flanges, creating a H-shaped fitting style. Features: Features: ● Simple, functional design ● Premium yet simple design ● Tangents on fittings ● 3” tangents on fittings ● 7” splice plate (aluminium splice plates ‘snap-in’ for added convenience) ● 7” splice plate (aluminium splice plates ‘snap-in’ for added convenience) Benefits: Offers maximum quality versus cost ratios of the installation ● Enhanced aesthetics and customer appeal ● Easy to install ● Easy to install ● Occupies less space in areas where space is restricted ● Improved system rigidity ● ● Easy alignment between straight sections and fittings Easy alignment between straight sections and fittings ● ● Splice plate holds components while hardware is inserted Splice plate holds components while hardware is inserted ● Lighter fittings are easy to handle Horizontal bends ● Vertical bends ● Tees and crosses ● Reducers ● Reducing tees and crosses ● Expanding tees ● Horizontal wyes ● Cable support Benefits: ● The range includes: ● H-Style fitting (Aluminium only) For aluminium cable ladder, two styles of fitting are available H-style and U-style. Select the fitting style that is preferred or best meets the project criteria and budget. Note: H-style and U-style aluminium fittings are interchangeable. 3” Now with tangents 1.96” 1.96” 7” 7” 3” Product selection - fittings Fitting part numbers are based on a range of selection criteria, dependent on the type of fitting and the role undertaken in the cable ladder system. Specifiers should choose the appropriate component part from the lists shown in the tables and create the part number following the example shown. Over the following pages, the selection criteria for each fitting type is established in table form. Images of fittings are provided to assist with selection. 8 Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com The variables for selection include: ● Material type ● Siderail height & ladder width(s) ● Bottom type and fitting type ● Angle ● Nominal radius Horizontal bends Cable ladder Horizontal bends enable the cable ladder system to change direction in the same plane. Horizontal bends are available in all material types, siderail heights, ladder widths and bottom types to match straight sections, and have a nominal radius of either 12”, 24”, 36” or 48”. ● Available with angles of 30º, 45º, 60º or 90º Horizontal bend Select the preferred component parts and create the specific part number as per the example shown. Siderail height Fitting material & siderail style MAUF-4-24-L-HB-45-12 Ladder width Bottom type Fitting type Angle Nominal radius HB I Horizontal bend 30 I 30º 12 I 12” 45 I 45º 24 I 24” 60 I 60º 36 I 36” 90 I 90º 48 I 48” MAUF I Aluminium U-style 4 I 4” 06 I 6” L I Ladder MAHF I Aluminium H-style 5 I 5” 09 I 9” V I Ventilated 6 I 6” 12 I 12” S I Solid trough 7 I 7” 18 I 18” 24 I 24” MSPF I Pre-galvanized steel U-style MSHF I Hot dip galvanized steel U-style MSSF I Stainless steel 316* U-style 3 I 3 5/8” 30 I 30” 4 I 4” 36 I 36” 5 I 5” 6 I 6” 7 I 7” Note: Aluminium U-style and H-style fittings are interchangeable. * Stainless steel 304 is available to special order. 90º 60º 45º 30º Aluminium U-style/steel Aluminium H-style 9 Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Cable ladder Vertical bends Vertical bends enable the cable ladder system to change direction to a different plane. An inside vertical bend changes direction upward from the horizontal plane. An outside vertical bend changes direction downward from the horizontal plane. Vertical bends are available in all material types, siderail heights, ladder widths and bottom types to match straight sections, and have a nominal radius of either 12”, 24”, 36” or 48”. ● Available with angles of 30º, 45º, 60º or 90º Vertical bend Select the preferred component parts and create the specific part number as per the example shown. Siderail height Fitting material & siderail style MAUF-4-24-L-VO-45-12 Ladder width Bottom type MAUF I Aluminium U-style 4 I 4” 06 I 6” L I Ladder MAHF I Aluminium H-style 5 I 5” 09 I 9” V I Ventilated 6 I 6” 12 I 12” S I Solid trough 7 I 7” 18 I 18” Fitting type VI VO I Vertical inside bend I Vertical outside bend Angle Nominal radius 30 I 30º 12 I 12” 45 I 45º 24 I 24” 60 I 60º 36 I 36” 90 I 90º 48 I 48” 24 I 24” MSPF I Pre-galvanized steel U-style MSHF I Hot dip galvanized steel U-style MSSF I Stainless steel 316* U-style 3 I 3 5/8” 30 I 30” 4 I 4” 36 I 36” 5 I 5” 6 I 6” 7 I 7” Note: Aluminium U-style and H-style fittings are interchangeable. * Stainless steel 304 is available to special order. Inside bend 90º 60º 45º 30º 90º 60º 45º 30º Aluminium U-style/steel Aluminium H-style Outside bend Aluminium U-style/steel 10 Aluminium H-style Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Tees, crosses & cable support Cable ladder Horizontal tees and crosses enable joins to be made in the cable ladder system at 90º angles, in the same plane. Vertical tees enable joins to be made in the cable ladder system at 90º angles, between horizontal and vertical planes. Cable support provides a corner support which changes direction of the cable run downwards by 90º to a different plane. Available in all material types, siderail heights, ladder widths and bottom types to match straight sections, with a nominal radius of either 12”, 24”, 36” or 48”. Horizontal tee, horizontal cross & cable support Select the preferred component parts and create the specific part number as per the example shown. Fitting material & siderail style Siderail height MAUF-4-24-L-VTD-12 Ladder width Bottom type MAUF I Aluminium U-style 4 I 4” 06 I 6” L I Ladder MAHF I Aluminium H-style 5 I 5” 09 I 9” V I Ventilated 6 I 6” 12 I 12” S I Solid trough 7 I 7” 18 I 18” Fitting type 24 I 24” MSPF I Pre-galvanized steel U-style MSHF I Hot dip galvanized steel U-style MSSF I Stainless steel 316* U-style 3 I 3 5/8” 30 I 30” 4 I 4” 36 I 36” HT I Horizontal tee 12 I 12” HX I Horizontal cross 24 I 24” VTU I Vertical tee up 36 I 36” VTD I Vertical tee down 48 I 48” CS I Cable support 5 I 5” 6 I 6” 7 I 7” Note: Aluminum U-style and H-style fittings are interchangeable. * Stainless steel 304 is available to special order. Horizontal tee Horizontal cross Cable support Aluminium U-style/steel Aluminium U-style/steel Aluminium H-style Aluminium H-style Vertical tee - up Nominal radius Vertical tee - down Aluminium U-style/steel Aluminium H-style Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com 11 Cable ladder Horizontal expanding tees & crosses Horizontal expanding tees and crosses enable joins to be made in the cable ladder system to wider ladder widths, at 90º angles in the same plane. Available in all material types, siderail heights, ladder widths and bottom types to match straight sections, with a nominal radius of either 12”, 24”, 36” or 48”. ● For expansion, ladder width 2 should be greater than ladder width 1 Horizontal expanding tee & cross Select the preferred component parts and create the specific part number as per the example shown. Fitting material & siderail style Siderail height MAUF-4-24-36-L-EX-12 Ladder width 1 Ladder width 2 Bottom type MAUF I Aluminium U-style 4 I 4” 06 I 6” 09 I 9” L I Ladder MAHF I Aluminium H-style 5 I 5” 09 I 9” 12 I 12” V I Ventilated 6 I 6” 12 I 12” 18 I 18” S I Solid trough 7 I 7” 18 I 18” 24 I 24” 24 I 24” 30 I 30” 30 I 30” 36 I 36” MSPF I Pre-galvanized steel U-style MSHF I Hot dip galvanized steel U-style MSSF I Stainless steel 316* U-style 3 I 3 5/8” Fitting type ET I Horizontal expanding tee EX I Horizontal expanding cross Nominal radius 12 I 12” 24 I 24” 36 I 36” 48 I 48” 4 I 4” 5 I 5” 6 I 6” 7 I 7” Note: Aluminium U-style and H-style fittings are interchangeable. * Stainless steel 304 is available to special order. Expanding tee Expanding cross Aluminium U-style/steel Aluminium U-style/steel Aluminium H-style Aluminium H-style 12 Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Horizontal reducing tees Cable ladder Horizontal reducing tees enable joins to be made in the cable ladder system to more narrow ladder widths, at 90º angles in the same plane. Available in all material types, siderail heights, ladder widths and bottom types to match straight sections, with a nominal radius of either 12”, 24”, 36” or 48”. ● For reduction, ladder width 2 should be less than ladder width 1 Horizontal reducing tee Select the preferred component parts and create the specific part number as per the example shown. Fitting material & siderail style Siderail height MAUF-4-36-24-L-RT-12 Ladder width 1 Ladder width 2 Bottom type MAUF I Aluminium U-style 4 I 4” 09 I 9” 06 I 6” L I Ladder MAHF I Aluminium H-style 5 I 5” 12 I 12” 09 I 9” V I Ventilated 6 I 6” 18 I 18” 12 I 12” S I Solid trough 7 I 7” 24 I 24” 18 I 18” 30 I 30” 24 I 24” 36 I 36” 30 I 30” MSPF I Pre-galvanized steel U-style MSHF I Hot dip galvanized steel U-style MSSF I Stainless steel 316* U-style 3 I 3 5/8” Fitting type RT I Horizontal reducing tee Nominal radius 12 I 12” 24 I 24” 36 I 36” 48 I 48” 4 I 4” 5 I 5” 6 I 6” 7 I 7” * Stainless steel 304 is available to special order. Note: Aluminum U-style and H-style fittings are interchangeable. Horizontal reducing tee Aluminium U-style/steel Aluminium H-style 13 Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Cable ladder Reducers Reducers enable joins to be made in the cable ladder system to fittings or straight sections of different widths, in the same plane. An offset reducer has the reduction set to a single side (right or left). A straight reducer has two symmetrical offset sides. Available in all material types, siderail heights, ladder widths and bottom types to match straight sections. ● For reduction, ladder width 2 should be less than ladder width 1 Offset & straight reducer Select the preferred component parts and create the specific part number as per the example shown. Siderail height Fitting material & siderail style MAUF-4-36-24-L-HLR Ladder width 1 Ladder width 2 Bottom type Fitting type MAUF I Aluminium U-style 4 I 4” 09 I 9” 06 I 6” L I Ladder MAHF I Aluminium H-style 5 I 5” 12 I 12” 09 I 9” V I Ventilated HSR I Straight reducer 6 I 6” 18 I 18” 12 I 12” S I Solid trough HRR I Offset reducer - right 7 I 7” 24 I 24” 18 I 18” 30 I 30” 24 I 24” 36 I 36” 30 I 30” MSPF I Pre-galvanized steel U-style 3 I 3 5/8” 4 I 4” MSHF I Hot dip galvanized steel U-style MSSF I Stainless steel 316* U-style 5 I 5” 6 I 6” 7 I 7” Note: Aluminium U-style and H-style fittings are interchangeable. * Stainless steel 304 is available to special order. Reducer HLR I Offset reducer - left Left Straight Aluminium U-style/steel Aluminium H-style 14 Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Right Horizontal wyes Cable ladder Horizontal wyes enable joins to be made in the cable ladder system in three directions, at a 45º interval in the same plane. Available in all material types, siderail heights, ladder widths and bottom types to match straight sections. Horizontal wye Select the preferred component parts and create the specific part number as per the example shown. Siderail height Fitting material & siderail style MAUF-4-36-L-HYL Ladder width Bottom type Fitting type MAUF I Aluminum U-style 4 I 4” 06 I 6” L I Ladder HYL I Horizontal wye - left MAHF I Aluminum H-style 5 I 5” 09 I 9” V I Ventilated HYR I Horizontal wye - right 6 I 6” 12 I 12” S I Solid trough 7 I 7” 18 I 18” 3 I 3 5/8” 30 I 30” 4 I 4” 36 I 36” 24 I 24” MSPF I Pre-galvanized steel U-style MSHF I Hot dip galvanized steel U-style 5 I 5” 6 I 6” MSSF I Stainless steel 316* U-style 7 I 7” Note: Aluminum U-style and H-style fittings are interchangeable. * Stainless steel 304 is available to special order. Horizontal wye Left Right Aluminium U-style/steel Aluminium H-style 15 Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Cable ladder Covers Covers are available for all cable ladder widths and material types, in a range of styles - solid, ventilated or peaked - for varying installation needs. Covers provide mechanical protection to cable runs and should be installed where falling objects may damage cables or where vertical cable ladder run is accessible by pedestrian or vehicular traffic. Outside cable ladder runs should be covered with a peaked flanged cover to protect cable from adverse weather conditions. Solid cover Solid covers provide maximum mechanical protection for cables which have limited heat build up. This version is supplied without a flange. Solid flanged cover The solid flanged cover is comparable to the solid cover, providing maximum mechanical protection for cables which have limited heat build up, but also includes a 1/2” flange. Ventilated flanged cover Ventilated flanged covers offer excellent mechanical protection while allowing heat produced by cables to dissipate through vents in the surface. Peaked flanged cover Peaked covers have 15° rise at the peak, and offer mechanical protection plus prevent accumulation of liquids on the cover (due to adverse weather condition or accident). Covers greater than 12” wide are available in 72” and 3 m lengths only. 16 Note: cover mounting hardware must be ordered separately for all cover types. Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Covers Cable ladder Product selection - covers Cover part numbers are based on a range of selection criteria, dependent on the type of cover required, and the need to cover straight sections or fittings. Covers are suitable for use with both U-style and H-style fittings. The variables for selection include: Over the following pages, the selection criteria for each cover type is established in table form. Specifiers should choose the appropriate component part from the lists shown in the tables and create the part number following the example shown. ● Material type & series ● Siderail height & ladder width(s) ● Cover and fitting type ● Angle ● Nominal radius Cover - aluminium straight section Select the preferred component parts and create the specific part number as per the example shown. Material type MABW I Aluminium MABW-1-12-SNC-72 Ladder width Series 1 I For cable ladder series: MAH-0-4, MAH-1-4 2 I For cable ladder series: MAH-2-4, MAH-3-4, MAH-4-4, MAH-5-4, MAH-2-5, MAH-3-5, MAH-4-5, MAH-0-6, MAH-1-6, MAH-2-6 * Peaked covers greater than 12” wide available in 72” and 3 m lengths only. 3 I For cable ladder series: MAH-3-6, MAH-4-6, MAH-5-6, MAH-6-6, MAH-2-7, MAH-2C-7, MAH3-7 06 I 6” 09 I 9” 12 I 12” 18 I 18” 24 I 24” 30 I 30” Cover type Length SNC I Solid non-flanged cover 72 I 72” SFC I Solid flanged cover 144 I 12 ft 3 I 3m VFC I Ventilated flanged cover PFC I Peaked flanged cover* 36 I 36” Cover - steel straight section Select the preferred component parts and create the specific part number as per the example shown. MSPW-12-SNC-3 Ladder width Cover type Length MSPW I Pre-galvanized steel 06 I 6” SNC I Solid non-flanged cover 72 I 72” MSHW I Hot dip galvanized steel* 09 I 9” SFC I Solid flanged cover MSSW I Stainless steel 316** 12 I 12” VFC I Ventilated flanged cover 18 I 18” PFC I Peaked flanged cover Material type 144 I 12 ft 3 I 3m 15 I 1.5 m* 24 I 24” 30 I 30” * Hot dip galvanized covers are available in 72” & 1.5 m lengths only. Other materials available in 72”, 12 ft & 3 m lengths only. 36 I 36” ** Stainless steel 304 is available to special order. 17 Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Cable ladder Covers Cover - aluminium & steel - horizontal bend & vertical inside bend Select the preferred component parts and create the specific part number as per the example shown. Material & fitting style Ladder width MAUW I Aluminium U-style 06 I 6” MAHW I Aluminium H-style 09 I 9” 12 I 12” MSPW I Pre-galvanized steel 18 I 18” MSHW I Hot dip galvanized steel 24 I 24” MSSW I Stainless steel 316* 36 I 36” * 30 I 30” MAUW-24-SNC-HB-60-12 Fitting type Angle Nominal radius HB I Horizontal bend 30 I 30º 12 I 12” 45 I 45º 24 I 24” 60 I 60º 36 I 36” 90 I 90º 48 I 48” Cover type SNC I Solid non-flanged cover SFC I Solid flanged cover VI I Vertical inside bend VFC I Ventilated flanged cover PFC I Peaked flanged cover** PVC I Peaked vented flanged cover** Stainless steel 304 is available to special order. ** Peaked covers are not available in pre-galvanized steel. Cover - aluminium & steel - vertical outside bend Select the preferred component parts and create the specific part number as per the example shown. Material & fitting style Siderail height MAUW-4-24-SNC-VO-90-12 Ladder width MAUW I Aluminium U-style 4 I 4” 06 I 6” MAHW I Aluminium H-style 5 I 5” 09 I 9” 6 I 6” 12 I 12” 7 I 7” 18 I 18” 24 I 24” MSPW I Pre-galvanized steel MSHW I Hot dip galvanized steel MSSW I Stainless steel 316* 3 I 3 5/8” 30 I 30” 4 I 4” 36 I 36” 5 I 5” 6 I 6” Cover type SNC I Solid non-flanged cover SFC I Solid flanged cover VFC I Ventilated flanged cover PFC I Peaked flanged cover** PVC I Peaked vented flanged cover** 7 I 7” * Stainless steel 304 is available to special order. ** Peaked covers are not available in pre-galvanized steel. 18 Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Fitting type VO I Vertical outside bend Angle Nominal radius 30 I 30º 12 I 12” 45 I 45º 24 I 24” 60 I 60º 36 I 36” 90 I 90º 48 I 48” Covers Cable ladder Cover - aluminium & steel - horizontal tee & cross, vertical tee up Select the preferred component parts and create the specific part number as per the example shown. MAUW-24-SNC-HT-12 Material & fitting style Ladder width MAUW I Aluminium U-style 06 I 6” MAHW I Aluminium H-style 09 I 9” 12 I 12” VFC I Ventilated flanged cover 18 I 18” PFC I Peaked flanged cover** MSHW I Hot dip galvanized steel 24 I 24” PVC I Peaked vented flanged cover** MSSW I Stainless steel 316* 36 I 36” MSPW I Pre-galvanized steel * Fitting type Nominal radius SNC I Solid non-flanged cover HT I Horizontal tee** 12 I 12” SFC I Solid flanged cover HX I Horizontal cross 24 I 24” Cover type VTU I Vertical tee up 36 I 36” 48 I 48” 30 I 30” Stainless steel 304 is available to special order. ** Peaked covers are not available in pre-galvanized steel, and are only available as horizontal tee. Cover - aluminium & steel - vertical tee down & cable support Select the preferred component parts and create the specific part number as per the example shown. Material & fitting style Siderail height MAUW-6-24-SNC-VTD-12 Ladder width Cover type Fitting type Nominal radius SNC I Solid non-flanged cover VTD I Vertical tee down 12 I 12” MAUW I Aluminium U-style 4 I 4” 06 I 6” MAHW I Aluminium H-style 5 I 5” 09 I 9” SFC I Solid flanged cover 6 I 6” 12 I 12” 7 I 7” 18 I 18” VFC I Ventilated flanged cover CS I Cable support 24 I 24” 36 I 36” 48 I 48” 24 I 24” MSPW I Pre-galvanized steel MSHW I Hot dip galvanized steel MSSW I Stainless steel 316* 3 I 3 5/8” 30 I 30” 4 I 4” 36 I 36” 5 I 5” 6 I 6” 7 I 7” * Stainless steel 304 is available to special order. 19 Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Cable ladder Covers Cover - aluminium & steel - horizontal reducing tee, horizontal expanding tee & cross Select the preferred component parts and create the specific part number as per the example shown. MAUW-36-12-SNC-RT-12 Ladder width 1 Ladder width 2 MAUW I Aluminium U-style 06 I 6” 06 I 6” MAHW I Aluminium H-style 09 I 9” 09 I 9” 12 I 12” 12 I 12” 18 I 18” 18 I 18” MSHW I Hot dip galvanized steel 24 I 24” 24 I 24” MSSW I Stainless steel 316* 30 I 30” 30 I 30” 36 I 36” 36 I 36” Material & fitting style MSPW I Pre-galvanized steel * Cover type Fitting type SNC I Solid non-flanged cover SFC I Solid flanged cover VFC I Ventilated flanged cover Stainless steel 304 to special order. Nominal radius RT I Horizontal reducing tee 12 I 12” ET I Horizontal expanding tee 24 I 24” EX I Horizontal expanding cross 36 I 36” 48 I 48” Note: for reduction, ladder width 2 should be less than ladder width 1. For expansion, ladder width 2 should be greater than ladder width 1. Cover - aluminium & steel - horizontal reducer Select the preferred component parts and create the specific part number as per the example shown. Material & fitting style MAUW-36-12-SNC-HLR Ladder width 1 Ladder width 2 MAUW I Aluminium U-style 09 I 9” 06 I 6” MAHW I Aluminium H-style 12 I 12” 09 I 9” 18 I 18” 12 I 12” 24 I 24” 18 I 18” MSHW I Hot dip galvanized steel 30 I 30” 24 I 24” MSSW I Stainless steel 316* 36 I 36” 30 I 30” MSPW I Pre-galvanized steel * Cover type Fitting type HLR I Horizontal reducer - left SNC I Solid non-flanged cover HSR I Horizontal reducer- straight HRR I Horizontal reducer - right SFC I Solid flanged cover VFC I Ventilated flanged cover Note: for reduction, ladder width 2 should be less than ladder width 1. Stainless steel 304 to special order. Cover - aluminium & steel - horizontal wye Select the preferred component parts and create the specific part number as per the example shown. Material & fitting style Cover type HYR I Horizontal wye - right 09 I 9” SFC I Solid flanged cover HYL I Horizontal wye - left 12 I 12” VFC I Ventilated flanged cover 06 I 6” MAHW I Aluminium H-style 18 I 18” MSHW I Hot dip galvanized steel 24 I 24” MSSW I Stainless steel 316* 30 I 30” 36 I 36” * Fitting type SNC I Solid non-flanged cover MAUW I Aluminium U-style MSPW I Pre-galvanized steel 20 Ladder width MAUW-24-SNC-HYL Stainless steel 304 to special order. Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Accessories Cable ladder Accessories and supports supplement installation of straight sections, covers and fittings. Quantity of standard cover clamps required: Accessories enable clamping of covers, separation of cables within the ladder rack and variable mounting, support and suspension of the cable ladder system. Straight section 6 ft 4 pieces 12 ft/3 m 6 pieces Horizontal and vertical bends 4 pieces Tees 6 pieces Crosses 8 pieces Note: when using the heavy duty cover clamp, only half the quantity of pieces are required. IMPORTANT NOTE: where the aluminium accessory part number prefix includes ‘B’ (e.g. ‘WAB’), this accessory can be used with both U-style and H-style fittings. Economical cover clamp Rigid indoor cover clamp for flat and flanged covers. Cannot be used with U-style fittings - use with MAH straights and MAHW fittings only. Part No. WAB-SCC Material Zinc plated steel Siderail height All sizes Cover clamp Rigid indoor cover clamp for flat and flanged covers. Part No. Material WAB-(*)-FCC Zinc plated steel WSP-(*)-SCC Steel (pre-galvanized) WSS-(*)-SCC Stainless steel 316 Part No. variable (*) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Heavy duty cover clamp Wrap around design offers added protection for rugged applications and outdoor conditions. Hardware included. Part No. Material/Ladder type WAB-(*)-(+)-HCC Aluminium WSP-(*)-(+)-HCC Steel (pre-galvanized) WSH-(*)-(+)-HCC Steel (hot dip galvanized) WSS-(*)-(+)-HCC Stainless steel 316 Steel Part No. variable (*) Part No. variable (+) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Replace (+) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. 21 Aluminium Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Cable ladder Accessories Extreme heavy duty cover clamp Wraparound design offers added protection for rugged applications and outdoor conditions. Hardware included. Part No. WAB-(*)-(+)-ECC Material/Ladder type Aluminium Part No. variable (*) Part No. variable (+) Replace (*) with single digit reference for siderail height: 4 = 4” 5 = 5” 6 = 6” 7 = 7” Replace (+) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Heavy duty peaked cover clamp Wraparound design formed to fit peaked cover for outdoor applications. Hardware included. Aluminium Part No. Material/Ladder type WAB-(*)-(+)-HPC Aluminium WSP-(*)-(+)-HPC Steel (pre-galvanized) WSH-(*)-(+)-HPC Steel (hot dip galvanized) WSS-(*)-(+)-HPC Stainless steel 316 Part No. variable (*) Part No. variable (+) Replace (*) with single digit reference for siderail height: 4 = 4” 3 = 3 5/8” 5 = 5” 6 = 6” 7 = 7” Replace (+) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Steel Combination hold down cover clamp Designed to secure flat and flanged covers with hold down feature. Part No. Material/Ladder type WAB-(*)-CCC Aluminium WSP-(*)-CCC Steel (pre-galvanized) WSS-(*)-CCC Stainless steel 316 Part No. variable (*) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Raised cover clamp Designed to raise cover above cable ladder for added ventilation. Cover Part No. WAB-(*)(+)-RCC Siderail Material/Ladder type Aluminium Part No. variable (*) Part No. variable (+) Replace (+) with single digit reference for cover offset: 1 = 1” 3 = 3” WSP-(+)-RCC Steel (pre-galvanized) Replace (*) with single digit reference for cover series: WSS-(+)-RCC Stainless steel 316 1 = Series 1 2 = Series 2 3 = Series 3 2 = 2” Note: cover series reference is only required for aluminium cable ladder. Stainless steel 304 available to special order. 22 Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Accessories Cable ladder Peaked end cap Used for transition between peaked covers and straight covers. Part No. Material/Ladder type Aluminium WAB-(*)-PEC WSP-(*)-PEC Steel (pre-galvanized) WSH-(*)-PEC Steel (hot dip galvanized) WSS-(*)-PEC Stainless steel 316 Part No. variable (*) Replace (*) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Stainless steel 304 available to special order. Cover joint strip Strip used for joining covers end to end. Manufactured from durable plastic material. Part No. For ladder type WAB-(*)-SCS Aluminium WSP-(*)-SCS Steel (pre-galvanized) Steel (hot dip galvanized) Stainless steel 316 Part No. variable (*) Replace (*) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Splice plate Packaged in pairs with zinc plated hardware. Aluminium versions ‘snap-in’ and are designed to lock into place for easy alignment and installation. Part No. WAB-(*)-SSP For ladder type Aluminium WSP-(*)-SSP Steel (pre-galvanized) WSH-(*)-SSP Steel (hot dip galvanized) WSS-(*)-SSP Stainless steel 316 Part No. variable (*) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Steel Note: splice plates provided as standard with each straight and/or fitting. 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Aluminium Expansion splice plate Allows for a 1” expansion or contraction of the cable ladder system. Aluminium versions ‘snap-in’ and are designed to lock into place for easy alignment and installation. Packaged in pairs with hardware. Part No. Material/Ladder type WAB-(*)-ESP Aluminium WSP-(*)-ESP Steel (pre-galvanized) WSH-(*)-ESP Steel (hot dip galvanized) WSS-(*)-ESP Stainless steel 316 Part No. variable (*) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Steel Aluminium 23 Cable ladder Accessories Reducing splice plate Use in pairs to provide a straight reduction or with a standard splice plate for an offset reduction. Packaged with hardware. Note: (+) For offset reduction: insert width to be reduced. For straight reduction: insert half width to be reduced (2 required). Example: MABW-4-03-RSP = 3” offset reducer. Part No. Material/Ladder type WAB-(*)-(+)-RSP Aluminium WSP-(*)-(+)-RSP Steel (pre-galvanized) WSH-(*)-(+)-RSP Steel (hot dip galvanized) WSS-(*)-(+)-RSP Stainless steel Part No. variable (*) Part No. variable (+) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Replace (+) with double digit reference for reduction value single figures are preceded by ‘0’ and decimals use first digit. e.g.: 03 = 3” 15 = 15” 01 = 1.5” 04 = 4.5” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Step down splice plate Connects siderails of different heights. Hardware included. Part No. Material/Ladder type Part No. variable (*) Part No. variable (+) WAB-(*)-(+)-SDS Aluminium WSP-(*)-(+)-SDS Steel (pre-galvanized) Replace (*) with single digit reference for siderail height 1: Replace (+) with single digit reference for siderail height 2: WSH-(*)-(+)-SDS Steel (hot dip galvanized) WSS-(*)-(+)-SDS Stainless steel 316 4 = 4” 6 = 6” 3 = 3 5/8” 5 = 5” 5 = 5” 7 = 7” 4 = 4” 6 = 6” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. When ordering, siderail height 2 should be less than siderail height 1. Horizontal adjustable plate Adjustable hinge plates provide maximum horizontal installation flexibility. Furnished in pairs with hardware. Part No. WAB-(*)-(+)-HAP Material/Ladder type Aluminium WSP-(*)-(+)-HAP Steel (pre-galvanized) WSH-(*)-(+)-HAP Steel (hot dip galvanized) WSS-(*)-(+)-HAP Stainless steel 316 Part No. variable (*) Part No. variable (+) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Replace (+) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Vertical adjustable plate Hinged vertical plates provide maximum flexibility for changes in elevation. Furnished in pairs with hardware. Part No. WAB-(*)-VSP Material/Ladder type Aluminium WSP-(*)-VSP Steel (pre-galvanized) WSH-(*)-VSP Steel (hot dip galvanized) WSS-(*)-VSP Stainless steel 316 Part No. variable (*) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 24 4 = 4” 5 = 5” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com 6 = 6” 7 = 7” Accessories Cable ladder Closure end plate Provides closure for any cable ladder end. Packaged with hardware. Part No. WAB-(*)-(+)-CEP Material/Ladder type Aluminium WSP-(*)-(+)-CEP Steel (pre-galvanized) WSH-(*)-(+)-CEP Steel (hot dip galvanized) WSS-(*)-(+)-CEP Stainless steel 316 Part No. variable (*) Part No. variable (+) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Replace (+) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Box to cable ladder plate Designed to secure cable ladder to electrical panels or boxes, walls or end supports. Furnished in pairs with hardware. Part No. Material/Ladder type WAB-(*)-BSP Aluminium WSP-(*)-BSP Steel (pre-galvanized) WSH-(*)-BSP Steel (hot dip galvanized) WSS-(*)-BSP Stainless steel 316 Part No. variable (*) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Frame type cable ladder to box plate Designed to secure cable ladder to electrical enclosures and panels. Hardware included. Part No. WAB-(*)-(+)-FBP Material/Ladder type Aluminium WSP-(*)-(+)-FBP Steel (pre-galvanized) WSH-(*)-(+)-FBP Steel (hot dip galvanized) WSS-(*)-(+)-FBP Stainless steel 316 Part No. variable (*) Part No. variable (+) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Replace (+) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Wall penetration sleeve Designed to pass through walls and fire walls. Hardware included. Note: Not Fire Rated. Fire Stop not included. Part No. Material/Ladder type WAB-(*)-(+)-WPS Aluminium WSP-(*)-(+)-WPS Steel (pre-galvanized) WSH-(*)-(+)-WPS Steel (hot dip galvanized) WSS-(*)-(+)-WPS Stainless steel 316 Part No. variable (*) Part No. variable (+) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7 Replace (+) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com 25 Cable ladder Accessories Drop-out Designed to provide a smooth radiused surface at any position on the ladder or trough bottom. Drop-outs are easily attached using hardware provided. Standard Radius = 4”. Part No. WAB-(*)-DO WAB-(*)-DOS WSP-(*)-DO Material Bottom type Aluminium Ladder/Ventilated Aluminium Solid Steel (pre-galvanized) Ladder/Ventilated WSP-(*)-DOS Steel (pre-galvanized) Solid WSH-(*)-DO Steel (hot dip galvanized) Ladder/Ventilated WSH-(*)-DOS Steel (hot dip galvanized) Solid WSS-(*)-DO Stainless steel 316 Ladder/Ventilated WSS-(*)-DOS Stainless steel 316 Solid Part No. variable (*) Replace (*) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Stainless steel 304 available to special order. Barrier strip Barrier strips provide a method for separating cables in cable ladder systems. Easily installed using supplied hardware or barrier strip clamps (sold separately). SBH 72” Barriers are flexible for use with horizontal fittings. WSH hot dip galvanized available in 72” and 1.5 m lengths only. Other materials available in 72”, 144” and 3 m lengths only. Part No. SB Length (*)-(+)-SBH-72 72” (*)-(+)-SB-144 144” (*)-(+)-SB-3 3m (*)-(+)-SB-15 1.5 m Part No. variable (*) Part No. variable (+) Replace (*) with three letter reference for material type: Replace (+) with single digit reference for siderail height: WAB = Aluminium WSP = Steel (pre-galvanized) WSH = Steel (hot dip galvanized) WSS = Stainless steel 316 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7 Note: 3 5/8” siderail available for steel cable ladder only. 72” barriers supplied as standard with 3 WSP-10-SCR (self-drilling tapping screw), 144” & 3 m barriers supplied as standard with 6 WSP-10-SCR. Stainless steel 304 available to special order. Inside/outside vertical bend barrier Pre-formed to fit all standard vertical bends. Provided with hardware. Part No. Siderail height Part No. variable (*) Part No. variable (+) (%) Replace (*) with three letter reference for material type: Replace (+) with bend angle: Vertical inside bend (*)-3-VIB-(+)-(%) 3 5/8” (*)-4-VIB-(+)-(%) 4” (*)-5-VIB-(+)-(%) 5” (*)-6-VIB-(+)-(%) 6” (*)-7-VIB-(+)-(%) 7” WAB = Aluminium WSP = Steel (pre-galvanized) WSH = Steel (hot dip galv.) WSS = Stainless steel 316 90 = 90º 45 = 45º 60 = 60º 30 = 30º Replace (%) with bend radius: 12 = 12” 36 = 36” 24 = 24” 48 = 48” Vertical outside bend 26 (*)-3-VOB-(+)-(%) 3 5/8” (*)-4-VOB-(+)-(%) 4” (*)-5-VOB-(+)-(%) 5” (*)-6-VOB-(+)-(%) 6” (*)-7-VOB-(+)-(%) 7” Replace (*) with three letter reference for material type: WAB = Aluminium WSP = Steel (pre-galvanized) WSH = Steel (hot dip galv.) WSS = Stainless steel 316 Replace (+) with bend angle: 90 = 90º 45 = 45º Replace (%) with bend radius: 12 = 12” 36 = 36” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com 60 = 60º 30 = 30º 24 = 24” 48 = 48” Accessories Cable ladder Barrier strip clamp Barrier strip clamps mount barrier strips to ladder rungs and ventilated bottoms. Complete mounting hardware supplied. Part No. Material WSP-BSC Zinc plated steel WSS-BSC Stainless steel 316 Stainless steel 304 available to special order. Barrier strip splice Alignment splice for joining connecting barrier strips. Part No. Material WAB-BSS Plastic Standard hold down clamp Designed for most indoor installations. Easy to use and install. Order 3/8“ hardware separately. Part No. WSP-(*)-SHC WSS-(*)-SHC Material Zinc plated steel Stainless steel 316 WSP-(*)-SHC-HDW Zinc plated steel, supplied with 1/4” hardware WSS-(*)-SHC-HDW Stainless steel 316, supplied with 1/4” hardware Stainless steel 304 available to special order. Combination hold down/expansion guide clamp Order hardware separately. Part No. Aluminium Material WAB-HEC Aluminium WSP-HEC Steel (pre-galvanized) WSH-HEC Steel (hot dip galvanized) WSS-HEC Stainless steel 316 Stainless steel 304 available to special order. 27 Steel Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Cable ladder Accessories Hold down clamp Designed to secure cable ladder to support system. Hardware included. Part No. WAB-(*)-HDC Material/Ladder type Aluminium WSP-(*)-HDC Steel (pre-galvanized) WSH-(*)-HDC Steel (hot dip galvanized) WSS-(*)-HDC Stainless steel Part No. variable (*) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Conduit to cable ladder clamp Standard finish: electro-galvanized steel. Part No. Conduit size M6210 1/2” - 3/4” M6212 1” - 1 1/4” Conduit to cable ladder swivel clamp Swivel clamp for aluminium and steel cable ladder with regular or reinforced flanges. Material: zinc plated malleable iron hub, with steel U-bolt included. ● Serrations and biting teeth on clamping saddle provide a high quality bond between conduit and clamp ● 1/2” to 4” can be clamped to any position in a 90º arc Part No. Conduit size M6209 1/2” - 3/4” M6211 1” - 1 1/4” M6214 1 1/2” - 2” M6216 2 1/2” - 3” M6218 3 1/2” - 4” Vertical cable ladder hanger Part No. WAB-(*)-VTH Material/Ladder type Aluminium WSP-(*)-VTH Steel (pre-galvanized) WSH-(*)-VTH Steel (hot dip galvanized) WSS-(*)-VTH Stainless steel 316 Part No. variable (*) Replace (*) with single digit reference for siderail height: 3 = 3 5/8” 28 4 = 4” 5 = 5” Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com 6 = 6” 7 = 7” Accessories Cable ladder Cable ladder guide Expansion guide for single or double runs of cable ladder. No need to field drill the channel or H-beam. Part No. Material WSP-CTG Zinc plated steel WSH-CTG Steel (hot dip galvanized) WSS-CTG Stainless steel 316 Stainless steel 304 available to special order. Cable ladder clamp Clamps for single run of cable ladder. No need to field drill the channel or H-beam. Part No. Material WSP-CTC Zinc plated steel WSH-CTC Steel (hot dip galvanized) WSS-CTC Stainless steel 316 Stainless steel 304 available to special order. Cantilever support Standard finish: hot dip galvanized steel. A B Design load MS203-14HDG Part No. 14 1/2” 5 3/8” 1200 lbs MS203-20HDG 20 1/2” 6 11/16” 1200 lbs MS203-26HDG 26 1/2” 8” 1200 lbs MS203-32HDG 32 1/2” 8” 1200 lbs MS203-38HDG 38 1/2” 8” 1200 lbs Note: order hold down clips separately - Part No. WSS-SHC. Cross member Standard finish: hot dip galvanized steel. Hanging rods not included. Part No. A B C MS202-6HDG 6” 5” - MS202-9HDG 9” 8” 2” MS202-15HDG 15” 14” 8” MS202-21HDG 21” 20” 14” MS202-27HDG 27” 26” 20” MS202-33HDG 33” 32” 26” Note: order hold down clips separately - Part No. WSS-SHC. Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com 29 Cable ladder Accessories Centre support bracket Cable support brackets are designed to reduce cable pulling by allowing access from both sides of the cable ladder. Installation cost and time are reduced significantly by single point suspension. ● Supplied as a complete kit ● Uses 1/2’’ threaded rod (order separately) ● For use with up to 24’’ wide cable ladder ● Load capacity : 700 lb per kit Part No. WSP-(*)-CSB Description Steel (hot dip galvanized) Part No. variable (*) Replace (*) with double digit reference for channel width: 18 = 18” (for 6” cable ladder) 30 = 30” (for 9” to 24” cable ladder) Trapeze kit Trapeze kits are designed to support various cable ladder widths in a suspending installation. Kit consists of 1 piece of strut cut to length, 4 x 3/8’’ strut nuts, 2 hold down clips, 4 x 1/2’’ hex nuts, 2 x 3/8’’ x 7/8’’ hex head cap screws, 4 x 1/2’’ square washers. Uses 1/2’’ threaded rod (order separately). Part No. Description WSP-(*)-TPK Steel (pre-galvanized) WSH-(*)-TPK Steel (hot dip galvanized) WSS-(*)-TPK Stainless steel 316 Part No. variable (*) Replace (*) with double digit reference for ladder width: 06 = 6” 09 = 9” 12 = 12” 18 = 18” 24 = 24” 30 = 30” 36 = 36” Ladder width:channel width ratio: 6”:16 7/8” 9”:18 3/4” 12”:22 1/2” 18”:28 1/8” 24”:35 5/8” 30”:41 1/4” 36”:46 7/8” Stainless steel 304 available to special order. Tray hardware Carriage bolt Part No. WSP-1/4-CB Self-drilling tapping screw Material Zinc plated steel Description Square shoulder self-positioning 1/4” carriage bolt WSP-3/8-CB Zinc plated steel Square shoulder self-positioning 3/8” carriage bolt WSP-1/4-HN Zinc plated steel 1/4” Hex. nut WSP-3/8-HN Zinc plated steel WSS-3/8-CB Stainless steel 316 3/8” Carriage bolt WSS-3/8-HN Stainless steel 316 3/8” Hex. nut WSS-3/8-HWK Stainless steel 316 Hardware kit inc. 8 nuts, 8 bolts & 8 lockwashers WSP-10-SCR Zinc plated steel 3/8” Hex. nut Self-drilling tapping screw Stainless steel 304 available to special order. Hardware available in metric sizes to special order - contact Thomas & Betts. 30 Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Accessories Cable ladder Threaded rod Part No. Size Threads/inch Design load H104-1/4x3(*) 1/4” 20 150 lb H104-3/8x3(*) 3/8” 16 610 lb H104-1/2x3(*) 1/2” 13 1130 lb H104-5/8x3(*) 5/8” 11 1810 lb H104-3/4x3(*) 3/4” 10 2710 lb H104-7/8x3(*) 7/8” 9 3770 lb 1” 8 4960 lb H104-1x3(*) Part No. variable (*) Replace (*) with reference for material type: EG = Electro-galvanized HDG = Hot dip galvanized SS4 = Stainless steel 304 SS6 = Stainless steel 316 Standard length 3 m. Rod available in metric sizes to special order - contact Thomas & Betts. Threaded rod coupling Rod size A H119-1/4(*) Part No. 1/4” 7/8” Replace (*) with reference for material type: H119-5/16(*) 5/16” 7/8” H119-3/8(*) 3/8” 1 1/8” EG = Electro-galvanized HDG = Hot dip galvanized SS4 = Stainless steel 304 SS6 = Stainless steel 316 H119-1/2(*) 1/2” 1 1/4” H119-5/8(*) 5/8” 2 1/8” H119-3/4(*) 3/4” 2 1/4” H119-7/8(*) 7/8” 2 1/2” 1” 2 1/4” H119-1(*) Part No. variable (*) A Coupling available in metric sizes to special order - contact Thomas & Betts. 31 Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com Superstrut® Metal framing channel Superstrut® 2.5 mm (12 Ga.) & 2 mm (14 Ga.) channel - type A and type B Metal framing channel available in 2.5 mm (12 Gauge) and 2 mm (14 Gauge) thickness. Aluminium, hot dip galvanized or stainless steel channels are recommended to support aluminium, steel or stainless steel cable ladder. Offered in lengths of 10 ft, 20 ft, 3 m or 6 m. Punched Solid base 1-7/8" Part No. (12 Ga.) Part No. (14 Ga.) Description Part No. variable (*) Part No. variable (+) Replace (*) with ref. for length: Replace (+) with ref. for material/finish type: A Series channel - 1 5/8” x 1 5/8” / 41 mm x 41 mm 2" 4" Half slots Long slots A1200-(*)-(+)M A1400-(*)-(+)M Solid base A1200-P-(*)-(+)M A1400-P-(*)-(+)M Punched A1200-HS-(*)-(+)M A1400-HS-(*)-(+)M Half slots A1200-S-(*)-(+)M A1400-S-(*)-(+)M Long slots A1202-(*)-(+)M A1402-(*)-(+)M 10 = 10 ft 20 = 20 ft 3=3m 6=6m AL = Aluminium HDG = Hot dip galvanized PG = Pre-galvanized T304 = Stainless steel 304 T316 = Stainless steel 316 Back to back B Series channel - 1 5/8” x 13/16” / 41 mm x 21 mm Back to back 1 5/8” 41 mm 7/8” 22 mm nominal 1 5/8” 41 mm 1 5/8” 41 mm 7/8” 22 mm nominal A Series B1200-(*)-(+)M B1400-(*)-(+)M Solid base B1200-P-(*)-(+)M B1400-P-(*)-(+)M Punched B1200-HS-(*)-(+)M B1400-HS-(*)-(+)M Half slots B1200-S-(*)-(+)M B1400-S-(*)-(+)M Long slots B1202-(*)-(+)M B1402-(*)-(+)M 13/16” 21 mm Replace (*) with ref. for length: 10 = 10 ft 20 = 20 ft 3=3m 6=6m Replace (+) with ref. for material/finish type: AL = Aluminium HDG = Hot dip galvanized PG = Pre-galvanized T304 = Stainless steel 304 T316 = Stainless steel 316 Back to back B Series Channel nuts B100 A100 Standard finish: electro-galvanized. Stainless steel channel nuts are recommended for aluminium channel - change suffix to SS4 or SS6 as required. A100 is designed for A Series channel, and B100 is for B Series. A100 and B100 available in imperial sizes ranging from 1/4” to 7/8”, and metric sizes from M6 to M22. AB100 available in imperial sizes ranging from 1/4” to 3/4”, and metric sizes from M6 to M20. Nut is square over 1/2” size Part No. Description A100-(*)-(+) Spring nut B100-(*)-(+) Spring nut AB100 Nut is square over 1/2” size AB100-(*)-(+) Springless nut Part No. variable (*) Part No. variable (+) Replace (*) with reference for thread size: Replace (+) with ref. for material/finish type: 1/4 = 1/4”/M6 5/16 = 5/16”/M8 3/8 = 3/8”/M10 1/2 = 1/2”/M12 5/8 = 5/8”/M16 3/4 = 3/4”/M20 7/8 = 7/8”/M22 EG = Electro-galvanized HDG = Hot dip galvanized SS4 = Stainless steel 304 SS6 = Stainless steel 316 Hex head cap screw Standard finish: electro-galvanized. Stainless steel channel nuts are recommended for aluminium channel - change suffix to SS4 or SS6 as required. Part No. E142-(*)-(+) 32 Description Hex head cap screw Part No. variable (*) Part No. variable (+) Replace (*) with reference for size: Replace (+) with reference for material/finish type: 1/4x100 = 1/4” x 1” 1/4x150 = 1/4” x 1 1/2” 3/8x100 = 3/8” x 1” 3/8x150 = 3/8” x 1 1/2” 1/2x100 = 1/2” x 1” 1/2x150 = 1/2” x 1 1/2” EG = Electro-galvanized HDG = Hot dip galvanized SS4 = Stainless steel 304 SS6 = Stainless steel 316 Cap screw available in metric sizes to special order - contact Thomas & Betts. Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Fittings and brackets Superstrut® Superstrut® fittings and brackets Fittings and brackets are available in four materials. To create specific part numbers, replace the part number variable (*) with the relevant material code shown right: Note: Hot dip galvanized HDG or stainless steel fittings (SS6 or SS4) are recommended to assemble aluminum channel. Standard dimensions: Hole spacing: 13/16” from end, 1 7/8” centres Part No. EG HDG SS4 SS6 = = = = Electro-galvanized Hot dip galvanized Stainless steel 304 Stainless steel 316 Hole size: 9/16” diameter, fitting width 1 5/8” Hole size AB241-1/4(*) 1/4” AB241-3/8(*) 3/8” AB241-1/2(*) 1/2” AB241-3/4(*) 3/4” AB206(*) AB207(*) X207(*) AB201(*) AB204(*) AB205(*) AB202(*) AB203(*) AB213(*) AB214(*) AB254-L(*) AB254-R(*) X289(*) AP235H(*) AP232(*) A 45⁄8" 3" Part No. A B Load S249-8(*) 8 1/2” 8” 1500 lb S249-14(*) 14 1/2” 9” 1500 lb S249-20(*) 20 1/2” 9” 1500 lb S249-26(*) 26 1/2” 11 1/2” 1500 lb S249-32(*) 32 1/2” 11 1/2” 1500 lb S249-38(*) 38 1/2” 11 1/2” 1500 lb Part No. A Load A Load S250-6(*) 6” 1500 lb S251-14(*) Part No. 14 1/2” 1650 lb S250-12(*) 12” 800 lb S251-20(*) 20 1/2” 800 lb S250-18(*) 18” 550 lb S251-26(*) 26 1/2” 650 lb S250-24(*) 24” 400 lb S251-32(*) 32 1/2” 500 lb S251-38(*) 38 1/2” 500 lb Note: may be installed inverted with no change in load ratings. Strut section made from half slot channel. Superstrut® channel brackets are available in other lengths on request. Contact Thomas & Betts for further information. Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com 33 Cable ladder Perforated cable tray Additional solutions Channel tray Available in aluminium, or steel in a range of finishes, with formats from medium duty to ultra heavy duty, T&B perforated tray is the all-round performer in our portfolio of cable tray solutions. T&B channel tray systems provide the ideal light duty solution to cable support. Suitable for supporting a wide range of telecoms, data, signal, computer and light power cables, channel tray is available in solid or ventilated straight sections together with a full suite of fittings & accessories, to meet the demands of even the most complex installations. The perforation pattern includes vertical and square slots for fixing Ty-Rap® cable ties etc, to enable better segregation and easier bundling of cables. Non-metallic cable tray ExpressTrayTM wire frame cable tray Non-metallic cable tray is tested and proven in the harsh environment of the offshore oil & gas industry, where exposure to adverse and corrosive conditions demands a solution with unique material properties. The ExpressTrayTM cable management system is a complete solution for managing light power, voice & data cables in commercial and industrial facilities, that delivers simplicity, efficiency, versatility and performance. Non-metallic cable tray is lightweight, neither rusts nor requires painting, and provides the load capacity of steel. Requiring no corner, cross or bend elements, any layout can be achieved simply with a length of tray and a pair of wire cutters. E-Klips spring steel fasteners Large radius cable tray E-Klips spring steel fasteners offer a quick, easy and reliable method of fixing services to steelwork without the need for bracket making, drilling holes or use of nuts and bolts. E-Klips fasteners are suitable for almost every application, including cables, cable tray, ducting, pipework, trunking, light fittings, conduit and suspended ceilings. 34 Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567, Dubai, UAE Tel: +971 (0)4 609 1635 ● Email: [email protected] ● Web: www.tnb-europe.com Custom-built cable support for petrochemical project tanks or towers. This cable tray system is usually installed around the outer perimeter of the catwalks and stairs which are mounted on the tank or vessel. Designed to special order to meet specific project needs. Additional solutions Cable ladder Cable ties and fasteners Terminals and connectors Thomas & Betts offers a broad range of cable ties designed to make the task of fastening, bundling, clamping and managing wires easier for all types of commercial, industrial and OEM applications. Sta-Kon®, Shield-Kon®, Color-Keyed® and Dragon Tooth® connectors offer secure, reliable, and highly conductive termination of shielded cables, power cables and magnet wire. Strength and reliability are hallmarks of the Thomas & Betts cable tie range, which are available in a variety of styles under the core brands: Ty-Rap®, Ty-Met®, Ty-Fast®, Ty-Grip® and Deltec® . All T&B connectors are complemented by manual and hydraulic crimping tools to enable fast, high quality crimps with the minimum of effort. Flexible conduit systems Heat shrink technologies Shrink-Kon® heavy, medium and thin wall heat shrink products protect cables and connectors against moisture, corrosion and abrasion. Thomas & Betts flexible conduit provides excellent protection for electrical cables against aggressive/corrosive environments, moisture and liquids, pressure loads, oil, dust, chemical pollutants and extreme temperatures. Additionally providing mechanical and electrical insulation, Shrink-Kon® products range from highly flexible to semi-rigid for a multitude of applications in industry and OEM. Flexible conduit is available under the Thomas & Betts core brands: Adaptaflex®, Kopex, Kopex-Ex, PMAFIX, PMAFLEX, Shureseal® and Shureflex®. Imperial to metric conversion chart All cable ladder measurements in this publication are based on imperial sizes. Please use the following chart for conversions of imperial measurements to metric as required when assessing cable ladder projects. inches mm inches mm inches mm inches mm inches mm 1/4” 6.35 mm 1 1/2” 38.1 mm 4” 101.6 mm 12” 304.8 mm 26 1/2” 673.1 mm 5/16” 7.94 mm 1 5/8” 41.28 mm 4 1/8” 104.78 mm 14” 355.6 mm 27” 685.8 mm 3/8” 9.53 mm 1 11/16” 42.86 mm 4 5/8” 117.48 mm 14 1/2” 368.3 mm 28 1/8” 714.38 mm 1/2” 12.7 mm 1 7/8” 47.63 mm 5” 127 mm 15” 381 mm 30” 762 mm 9/16” 14.29 mm 2” 50.8 mm 5 3/8” 136.53 mm 16 7/8” 428.63 mm 32” 812.8 mm 5/8” 15.9 mm 2 1/8” 53.98 mm 6” 152.4 mm 18” 457.2 mm 32 1/2” 825.5 mm 3/4” 19.05 mm 2 1/4” 57.15 mm 6 11/16” 169.86 mm 18 3/4” 476.25 mm 33” 838.2 mm 13/16” 20.64 mm 2 1/2” 63.5 mm 7” 177.8 mm 20” 508 mm 35 5/8” 904.88 mm 7/8” 22.23 mm 2 5/8” 66.68 mm 7 1/4” 184.15 mm 20 1/2” 520.7 mm 36” 914.4 mm 1” 25.4 mm 3” 76.2 mm 8” 203.8 mm 21” 533.4 mm 38 1/2” 977.9 mm 1 1/8” 28.58 mm 3 1/4” 82.55 mm 8 1/2” 215.9 mm 22 1/2” 571.5 mm 41 1/4” 1047.75 mm 1 1/4” 31.75 mm 3 1/2” 88.9 mm 9” 228.6 mm 24” 609.6 mm 46 7/8” 1190.63 mm 1 7/16” 36.51 mm 3 5/8” 92.08 mm 11 1/2” 292.1 mm 26” 660.4 mm 48” 1219.2 mm Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952, Saudi Arabia Tel: +966 (0)3 812 1222 ● Email: [email protected] ● Web: www.tnb-europe.com 35 K.S.A. PROJECT OFFICE EUROPEAN HEADQUARTERS Thomas & Betts Saudi Arabia Thomas & Betts Building 128 European Centre SA Dammam Industrial Area #2 200 Chaussée de Waterloo PO Box 514 B-1640 Rhode-St-Genèse Al Khobar 31952 Belgium Saudi Arabia Tel +32 (0)2 359 8200 Tel +966 (0)3 812 1222 Fax +32 (0)2 359 8201 Fax +966 (0)3 812 2981 [email protected] UK OFFICE MIDDLE EAST SALES OFFICE Thomas & Betts Limited Wilford Road Thomas & Betts Ltd. Br. Nottingham Office 724 6WA West Wing NG2 1EB Dubai Airport Free Zone United Kingdom PO Box 54567 Dubai Tel +44 (0)115 964 3700 United Arab Emirates Fax +44 (0)115 986 0538 Tel +971 (0)4 609 1635 [email protected] Fax +971 (0)4 609 1636 [email protected] www.tnb-europe.com The content of this Thomas & Betts catalogue has been carefully checked for accuracy at the time of print. However, Thomas & Betts doesn’t give any warranty of any kind, express or implied, in this respect and shall not be liable for any loss or damage that may result from any use or as a consequence of any inaccuracies in or any omissions from the information which it may contain. E&OE. Copyright Thomas & Betts Corp. 2011. Copyright in these pages is owned by Thomas & Betts except where otherwise indicated. No part of this publication may be reproduced, copied or transmitted in any form or by any means, without our prior written permission. Images, trade marks, brands, designs and technology are also protected by other intellectual property rights and may not be reproduced or appropriated in any manner without written permission of their respective owners. Thomas & Betts reserves the right to change and improve any product specifications or other mentions in the catalogue at its own discretion and at any time. These conditions of use are governed by the laws of the Netherlands and the courts of Amsterdam shall have exclusive jurisdiction in any dispute. TB-AS-CL-1011