MYBSB3R315ABT DATA Sheet 1 DC-DC Converter DATA Sheet MYBSB3R315ABT 1. Features ・Standard Sixteenth-brick package. ・High efficiency and smll size product. ・Long life and high reliability design. ・Adjustable output voltage range by connecting external resistance. (80%~110%) ・UVLO function,ON/OFF function,Output voltage sense function, Over-current protection,Over-voltage protection,Thermal shutdown are built in. 2. Appearance, Dimensions Marking of No.1 pin 3 3 ±0 . 0. 5 (10.0) . 7. 5 2 2 ±0 (3 . )7 3 ( 2 . 5 4 ) 2 7 .±0 9 4. 2 5 φ 7.0 Pick and place location (13.55) 8 1 7 2P 2 4P 6 2P 5 3 4 MFG,ID Lot No. 8.9±0.4 Parts № P=3.81±0.25 8-φ 1.57 0.10 Marking (1) Parts No. (2) MFG,ID P2N (3) Lot No. [unit:mm] □□□ ①②③ ① Production Factory ② Production Year ③ Production Month (1,2,3・・・9X,Y,Z) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 2 ※Pin Number, Function Pin No. 1 2 3 4 5 6 7 8 Signal Vin(+) ON/OFF Vin(-) Vout(-) SENSE(-) TRIM SENSE(+) Vout(+) Function Positive Input Voltage Remote ON/OFF Negative Input Voltage Negative output Voltage Negative Remote Sense Output Voltage Adjustment Positive Remote Sense Positive output Voltage 3. Block Diagram +SENSE (7) +VOUT (8) +VIN (1) SWITCH CONTROL -VOUT (4) -VIN (3) -SENSE (5) REMOTE ON/OFF CONTROL (2) PROTECTIONS PWM CONTROLLER OPTO COUPLER REFERENCE & ERROR AMP TRIM (6) Figure1. Simplified Schematic 4. Environmenral Conditions 4.1. Operating Temperature Range -40°C ~ +85°C (Please refer the temperature derating.) 4.2. Storage Temperature Range -45°C ~ +105°C 4.3. Operating Humidity Range 20% ~ 85% (No dew deposit) 4.4. Storage Humidity Range 10% ~ 95% (No dew deposit) 5. Absolute Maximum Ratings Item Minimum Input Voltage Time Maximum Input Voltage Continuous 100ms Unit V V V Absolute Rating 0 75 100 Remarks ※No voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to this product. If you apply any voltage over this limit the product characteristics will deteriorate or the product itself will be destroyed. Even though it may continue operating for a while after the over-voltage event, its life will likely be shortened significantly. Reliability and life of the module may degrade similarly if the maximum operating voltage rating is continuously exceeded. This product is designed to operate within the maximum operating voltage rating specification. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 3 6. Electrical Characteristics 6.1. Specific Characteristics (Ta=40~+85 oC with temperature derated.) Test circuit is mentioned in section 9. Value Item Symbol Input Voltage Vin Turn-on Input Voltage UVLO Condition Vin=increasing Input Voltage difference of Turn-on and Turn-off Vin=Min~Max Iout=Min~Max Unit Min. Typ. Max. 36 48 75 V 32 - 36 V - 2.0 - V 3.201 3.3 3.399 V Output Voltage Vout Output Voltage Adjustable Range Vout(adj) -20 - +10 % Output Current Iout 0 - 15.0 A Ripple Voltage Vripl Vin =48V, Iout=Max BW=20MHz - - 100 mV(pp) Efficiency EFF Vin =48V, Iout=15A o Ta=25 C - 90.5 - % Start up delay time ts Vin=Min~Max Iout=Min~Max Vin connection to Vout × 90% - 15 - ms Von 0 - 0.5 Voff 2 - - - 5 - ms ON/OFF pin Control Voltage V Vin=Min~Max Iout=Min~Max RC connected with to Vout × 90% RC start up delay time trc Setting point of Over Current Protection OCP Vin=Min~Max 15.45 - - A Setting point of Over Voltage Protection OVP Vin=Min~Max 3.96 - - V DC for one minute 1500 - - V Ceramic capacitor 0 - 1000 µF Input to Output Isolation Voltage External Output Cout Capacitance Item Value Protection If output is shorted , or output voltage is over the value specified in OVP , or DC-DC converter is heated abnormally, DC-DC converter will enter a hiccup mode where it repeatedly turn on and off. After rejected the abnormal mode, DC-DC converter will automatically restart. However output short, output over voltage, and abnormal heating affect long-term reliability. Safety standards Recognized UL60950 Flame resistance Meet UL94V-0 Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 4 6.2. Temperature Derating <For Reference Only> (1)Air flow 1.0m/s (With no Heat sink) MYBSB3R315ABT Thermal derating Input Voltage 48V Air Flow 1.0m/s Output Current (A) 15 13.7A 10 5 78C 0 -40 -20 0 20 40 60 80 85C 100 Ambient Temperature(℃) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 5 7. Operation information 7.1. To Adjust Output Voltage ・When TRIM-pin (6pin) is left open, DC-DC converter applies nominal output voltage. ・Resistors connected between TRIM-pin(6pin) to SENSE(+)-pin (7pin) will increase the output voltage (Vo,adj) between 100% ~ 110% of the nominal output voltage(Vo,nom). (Vout-Up control) ・Resistors connected between TRIM-pin(6pin) to SENSE(-)-pin (5pin) will decrease the output voltage(Vo,adj) between 80% ~ 100% of the nominal output voltage(Vo,nom). (Vout-Down control) ・The following equations give the required external-resistor value to adjust the output voltage to Vo,adj. After calculating external resistance, it is necessary to check the output voltage and to adjust of the resistance value at your board conditions. ・When you increase the output voltage, 5.11 Vo 100(%) Δ(%) 5.11 100(%) kΩ Radj - up= - 10.22 1.225 Δ(%) Δ(%) where, Δ Vo, adj - Vo, nom 100(%) Vo, nom ・when you decrease the output voltage, 5.11 100(%) kΩ Radj - down= - 10.22 Δ(%) where, Δ Vo, nom - Vo, adj 100(%) Vo, nom ・If you change output voltage, it is necessary to evaluate the characteristics of DC-DC converter at your board conditions. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 6 7.2. ON/OFF control ・On control ON/OFF Pin (2Pin) should be connected to Vin(-) Pin (3Pin), or keeps less than 0.5V. ・Off control ON/OFF Pin (2Pin) should be opened, or the current from ON/OFF Pin (2Pin) to Vin(-) Pin (3Pin) is controlled less than 50uA. MYBSB3R315ABT 2 example 3 Vin(-) ON/OFF or The voltage of maximum 10V appears in the ON/OFF pin at the time of pin opening. 7.3. External input capacitor When a inductance or a switch devise is connected to Input line, or when the transient response of input power supply is bad, input voltage is greatly changed at the time of load sudden change of DC-DC converter. Since the load response of DC-DC converter may not be normally demonstrated by this influence, and DC-DC converter may cause unusual oscillation、in such a case, please connect an external input capacitor. 7.4. Output voltage remote sense It has the remote sense function which corrects a voltage drop by the line drop from the power supply output terminal to the load terminal . A voltage drop by the line drop can be corrected by connecting No.5 pin and No.7 pin to the load terminal part. At the time of a remote sense, a remote sense line is to use a shielding wire, a twist line, a side by side pattern, and so on , and reduce the influence of the noise. A Output Voltage Remote Sense Range is Vout (nom) within +5%. And, use an output voltage within the output adjustment range. Short-circuit No.4 -No.5 terminal and No.7- No.8 terminal respectively when a remote sense shouldn't be necessary. If you use an output voltage remote sense, it is necessary to evaluate the characteristics of DC-DC converter at your board conditions. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 7 8. Reliability 8.1. Humidity Test Subjected to a temperature 40℃±2℃ with 90~95% for 100 hours. Return to room temperature (25℃) for 2 hours and measure. The initial values in item 6.1 should be met. (JIS-C-0022) 8.2. Thermal Cycle Test Subjected to 5 cycle of the following. Placed in room temperature (25℃) for 2 hours and are measured. The initial values in item 6.1 should be met. Step Condition Time 1 -40°C±3°C 30 minutes 2 Room Temp. 5~10 minutes 3 +85°C±2°C 30 minutes 4 Room Temp. 5~10 minutes 8.3. Vibration 10 to 55Hz,1.5mm amplitude,1 hour for each of X,Y,Z directions. No damage in appearance and no deviation from electrical characteristics.(section 6.1) 8. 4. Mechanical Shock 20G,1 time for each X,Y,Z directions. No damage in appearance and no deviation from electrical characteristics.(section 6.1) 8. 5. Soldering Heat Resistance Touch a solder iron to the pin of DC-DC Converter for 3±0.5 seconds. Solder iron : MAX 30W , 350℃ There should be no damage in appearance. Measure the DC-DC Converter after 2 hours and the initial values in item 6.1 should be met. 8. 6. Pull Strength Fasten the body of DC-DC Converter and pull the lead gradually in a radial direction with 5.0N load, keep the load for 5 seconds. The body should not be damaged thereafter. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 8 9. Test Circuit In the following test circuit, the initial values in item 6.1 should be met. 9.1. General Measure Circuit 1 10mΩ v v Vin Vin(+) 8 1mΩ v MYBSB3R3 15ABT C1 3 Vout(+) RL v Vin(-) Short =ON Open =OFF 2 Vout(-) ON/OFF 4 C1: Low Impedance Electrolytic Capacitor 33μF RL: Electronic Load Device :Model EUL150αXL Fujitsu DENSO equivalent Vin: DC Power Supply :Model HP6675A HP equivalent V : Digital Multimeter :Model HP34401A HP equivalent ※When deviating from the above, DC-DC converter may operate abnormally. It should be fully confirmed on your board before use. 9.2. Ripple Nise Test 50mm DC-DC Converter C1 C2 1.5m50Ω Coaxial cable LOAD TRC-50F Terminating resistance Oscilloscope BW=150MHz C1 : Ceramic Capacitor 0.1μF C2 : Low Impedanse Tantalum Capacitor 10μF Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 9 10. Packaging Specification 10.1. Emboss Tape Dimensions φ330±2 10.2. Real Dimension Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 10 10.3. Taping Specification Epmty portion (200mm MIN) Epmty portion (200mm MIN) Leader portion (200mm MIN) Module on tape portion Indication Pulling direction 10.4. Note 1. The adhesive strength of the protective tape must be within 0.1~1.3N. 2. Each reel contains 140pcs. 3. The deficiency per reel is 0 piece. 4. The reel shows customer part number, Murata part number and quantity. 5. The color of reel is not designated. 11. Production factory Komatsu Murata Mfg.Co., Ltd. Kanazu Murata Mfg. Co., Ltd. Wakura Murata Mfg. Co., Ltd. Shenzhen Murata Technology Co., Ltd. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 11 12. Typical Characteristics Data 12.1. Transient Response Iout 5A/div Iout 5A/div Vout(OFFSET:3.3V) 100mV/div Vout(OFFSET:3.3V) 100mV/div Time:200uS/div Time:200uS/div Fig.12-1a. Load Transient Response (25%Load Step) Fig.12-1b.Load Transient Response (50%Load Step) 12.2. Enable Start-up On/Off Control 2V/div On/Off Control Vout 1V/div 2V/div Vout 1V/div Time:4mS/div Time:4mS/div Fig.12-2a. Enable Start-up(Vin=48V Iout=0A) Fig.12-2b. Enable Start-up(Vin=48V Iout=15A) 12.3. Ripple and Noise (0.1μF Ceramic plus 10μF Tantalum) Vout 20mV/div Vout 20mV/div Time:2uS/div Fig.12-3a. Ripple Waveform(Vin=48V Iout=0A) Time:2uS/div Fig.12-3b. Ripple Waveform (Vin=48V Iout=15A) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 12 12.4. Efficiency v.s. Output Current MYBSB3R315A** Efficiency 25C 95 Efficiency (%) 90 85 36Vin 48Vin 75Vin 80 75 70 0 5 10 15 Output current (A) Fig.12-4. Efficiency Curves Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 13 13. Mounting Condition 13. 1. Soldering 13.1.1. Flux Please solder the product with Rosin Flux, which contains chlorine 0.2wt% or less. Please do NOT use acid flux or water-soluble flux, which could corrode metals and glass of the product. 13.1.2. Solder Please use the solder or the solder paste Sn96.5/Ag3/Cu0.5 or the equivalent type. Bismuth and Indium contained solder may affect solder connection of the solder ball pins. Please evaluate solderability enough for products approval. 13. 1.3. Recommended Soldering Conditions Reflow Solder Method : Full convection reflow soldering Reflow Soldering Profiles JEDEC IPC/JEDEC J-STD-020D Table 5-2 Classification Reflow Profile Pb-Free Assembly Large Body Profile details Soldering temperature Soldering time Heating time Preheating time Programming rate Descending rate Total soldering time Times : : : : : : : : 245ºC+0/-5ºC 30 seconds, 240 to 245ºC 60 to 150 seconds, over217ºC 60 to 120 seconds,150 to 200ºC 3ºC/ sec. Max., 217 to 245ºC 6ºC/ sec. Max. 8 minutes Max., 25 to 245ºC 1 time 2 4 5oC 2 17 oC Parts surface temperature [ºC] 200 oC 60~150 (seconds) 1 50 o C 60~120 (seconds) Times ※Do not vibrate for the products on reflow. Please need to take care temperature control because mounted parts may come off if the product are left under the high temperature. Do not reflow DC-DC converter as follows, because DC-DC converter may fall down from a substrate during reflowing. Substrate DC-DC Converter This product adopts solderball pin. The solder ball melts in your reflow and coplanarity≦0.1mm is satisfied. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 14 13.2. Cleaning 13.2.1. When cleaning the products, please wash the products in isopropyl alcohol for up to 5 minutes using the dipping, boiling, and vapor methods. Please inform us if you are to use aqueous or semi-aqueous cleaning or another methods. Do not use ultrasonic cleaning because semiconductor device on the products, bonding wires may be broken by resonance. 13.2.2. After cleaning, please dry the products thoroughly. If you touch the products that have not been dried enough yet, you need to take care because the marking of the products may get thin or blurred. Do not measure electrical characteristics, until the products get dried enough. 13.2.3. If you use no-cleaning type flux and you don’t clean our products, please confirm the reliability of the products fully in advance. 14. Notice 14.1. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may becaused by the abnormal function or the failure of our product. 14.2. Please connect the input terminal by right polarity. If you mistake the connection , it may break the DC-DC converter. In the case of destruction of the DC-DC converter inside, a large input current may flow. Please add a diode and fuse as follows. fuse + + + diode IN - OUT Load - Rated Fuse Current:5A ※Please select a diode and fuse after confirming the operation. 14.3. Storage 14.3.1. Please store the products in room where the temperature/humidity is stable and direct sunlight cannot come in and use the products within 6 months after delivery. Avoid damp heated places or such places where there are large temperature changes, because water may condense on the products, the characteristics may be reduced in quality, and/or be degraded in the solderability. If you store the products for a long time (more than 1 year), use caution because the products may be degraded in the solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 14.3.2. Please do not store the products in the places such as: in a dusty place, in a place exposed directly to sea breeze, in an atmosphere containing corrosive gas (Cl2,NH3,SO2,NOX and so on). Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 15 14. 4. Operational Environment and Operational Conditions 14.4.1. Operational Environment The products are not waterproof, chemical-proof or rustproof. In order to prevent leakage of electricity and abnormal temperature increase of the products , do not use the products under the following circumstances: (1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on) (2) in a dusty place (3) in a place exposed to direct sunlight (4) in such a place where water splashes or in such a humid place where water condenses (5) in a place exposed to sea breeze (6) in any other places similar to the above (1)through (5) 14.4.2. Operational Conditions Please use the products within specified values (power supply, temperature, input, output and load condition, and so on). Input voltage drop for line impedance, so please make sure that input voltage is included in specified values. If you use the products over the specified values, it may break the products, reduce the quality, and even if the products can endure the condition for short time, it may cause degradation of the reliability. 14.4.3. Note prior to use If you apply high static electricity, over rated voltage or reverse voltage to the products, it may cause defects in the products or degrade the reliability. Please avoid the following items: (1) over rating power supply, reverse power supply or not-enough connection of 0 V(DC)line (2) electrostatic discharge by production line and/or operator (3) electrified product by electrostatic induction Do not give an excessive mechanical shock. If you drop the products on the floor, etc., it may occur a crack to the core of inductors and monolithic ceramic capacitors. Do not give a strong shock such as a drop in handling. Do not bend this product much more than 0.1mm. 14.5. Transportation If you transport the products, please pack them so that the package will not be damaged by mechanical vibration or mechanical shock, and please educate and guide a carrier to prevent rough handling. If you transport the products to overseas (in particular, by sea), it is expected that the transportation environment will be the worst, so please pack the products, in the package designed on the consideration of mechanical strength, vibration-resistant and humidity-resistant. The package of the products, which Murata sells in Japan, may not resist over sea transport. Please consult us if you are to use the Murata package of the products sold in Japan for transport to overseas. ! Note 1. Murata recommends that customers ensure that the evaluation and testing of these devices are completed with this product actually assembled on their product. 2. Please contact our main sales office or nearby sales office before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party’s life, body or property or this products for any other applications that described in the above. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22 MYBSB3R315ABT DATA Sheet 16 ①Aircraft equipment ②Aerospace equipment ③Undersea equipment ④Power plant control equipment ⑤Medical equipment ⑥Transportation equipment (vehicles, trains, ships, etc.) ⑦Traffic signal equipment ⑧Disaster prevention /crime prevention equipment ⑨Data-processing equipment ⑩Application of similar complexity and/or reliability requirements to the applications listed in the above. 3. This data sheet is indicated in July 2012. About the written contents, since changing without a preliminary announcement for improvement and supply are sometimes stopped, please confirm in case of ordering. If written contents are unknown, please ask to our main sales office or nearby sales office. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 2013.1.22