Click Here to download this file: /data/power/MYSDM3R306EENL.pdf

MYSDM3R306EENL DATA Sheet
1
DC-DC Converter DATA Sheet
MYSDM3R306EENL
1. Features
・Dual Output Voltage
・High efficiency , smll size and low profile.
・Surface Mount Type of Nom-insulated DC-DC Converter
・Fast Transient Response (Vout2)
・Adjustable output voltage range by connecting external resistors
（Vout2: 0.9V to 1.8V）
・ON/OFF function and short cicuit protection are built in.
2. Appearance, Dimensions
30.2±0.6 （Case width）
18
10
20.9±0.4
MYSDM
3R306 EENL
MURATA
□□□□□□
1
6.9 max.
b
a = 2.54
b = (4.94)
【Unit ： mm】
9
a
a a a a
a a a
b
Top of pin
0.15 max.
Tolerance ±0.3mm
Tolerance is not accumulated.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
2
Marking
(3) Lot No.
MYSDM3R306EENL
MURATA
□□□□□□
(4)Pin No.1 Side Marking
○
(1)Manufacturer Parts Number
(2) Manufacturer ID
※ Pin Number, Function
Pin No.
Symbol
Function
1,2
Vout1
Ch1 Voltage Output Terminal
3,4,7,12,15,16
GND
GND Terminal
5,6
Vin1
Ch1 Voltage Input Terminal
8
ON/OFF1
9
N.C.
No Connection
10
VAR2
Vout2 Output Voltage Adjustment Terminal
11
ON/OFF2
13,14
Vin2
Ch2 Voltage Input Terminal
17,18
Vout2
Ch2 Voltage Output Terminal
Vout1 ON/OFF Control Terminal
Vout2 ON/OFF Control Terminal
3. Block Diagram
Vin1
(5,6)
ON/OFF1
(8)
Vout1
(1,2)
Control
Circuit
N.C.
(9)
GND
（3,4,7）
Vout2
(17,18)
Vin2
(13,14)
ON/OFF2
(11)
Control
Circuit
VAR2
(10)
GND
（12,15,16）
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
3
4. Environmental Conditions
4.1. Operating Temperature Range -10°C ~ +70°C
4.2. Storage Temperature Range
-20°C ~ +85°C
4.3. Operating Humidity Range
10% ~ 85% （No dew deposit）
4.4. Storage Humidity Range
5% ~ 90% （No dew deposit）
5. Absolute Maximum Ratings
Item
Unit
Absolute Rating
Maximum Input Voltage
V
25
ON/OFF1, ON/OFF2
V
Vin
VAR2
V
7
Remarks
※No voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to
this product.
If you apply any voltage over this limit the product characteristics will deteriorate or the product itself will
be destroyed.
Even though it may continue operating for a while after the over-voltage event, its life will likely be shortened
significantly. Reliability and life of the module may degrade similarly if the maximum operating voltage rating
is continuously exceeded. This product is designed to operate within the maximum operating voltage
rating specification.
6. Electrical Characteristics
6.1. Specific Characteristics (Ta=+25°C)
Item
Min.
Typ.
Max.
10.8
12
16.5
3.184
3.300
3.416
RVAR2=33.47kΩ
1.737
1.800
1.863
RVAR2=9.1kΩ
1.158
1.200
1.242
RVAR2=6.6kΩ
1.061
1.100
1.139
RVAR2=5.3kΩ
1.013
1.050
1.087
0.9
-
1.8
Vout1
Output Voltage
Value
Condition
Symbol
Input Voltage
Test circuit is mentioned in section 9.
Vout2
-
Vin=10.8～16.5V
Iout1=0～3A
Iout2=0～6A
Output Voltage
Adjustable Range
Output Current
Iout1
Iout2
Vin=10.8～16.5V
0
3.0
0
6.0
Unit
V
V
A
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
4
Item
Symbol
Efficiency
Eff
Output Ripple
Voltage
Vrip1
Vrip2
Value
Condition
Vin=12.0V
Iout1=3A,Iout2=6A
Vout1=3.3V,Vout2=1.05V
Vin=12.0V
Iout1=3A,Iout2=6A
Vout1=3.3V,Vout2=1.05V
BW=20MHz
OFF
ON/OFF1
Vin=10.8～16.5V
Iout1=0～3A
Remote Voltage
ON
OFF
ON/OFF2
Vin=10.8～16.5V
Iout1=0～3A
ON
Min.
Typ.
Max.
-
90
-
-
20
-
-
20
-
2.5
-
Vin
-
-
0.5
open
2.5
-
Vin
-
-
0.5
Unit
%
mV
(p-p)
V
open
※ Short Circuit Protection
If output is shorted to GND, DC-DC converter shall be operated in a hiccup mode.
After the short circuit event has cleared, the output is automatically brought back into regulation.
※The oscillatory frequency of 1 and 2 has not synchronized. The phase is not suitable either.
6.2. Output Current(Iout1,Iout2) De-rating (Ta=-10～+70°C)
＜Vout1=3.3V、Vout2=1.05V＞
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
5
7. Operation information
7.1. Output Voltage Adjustment
The output voltage can be adjusted by connecting resistors between VAR2-pin(10pin) to Vout2- pin(17,18).
The following chart gives the required external-resistor value to adjust the output voltage.
Vout2 Output Voltage
RVAR2
1.05V
1.2V
1.8V
5.3kΩ
9.1kΩ
33.47kΩ
※When you connect or change the resistance which adjusts output voltage, please carry out after carrying out a
DC-DC converter stop. If it carries out at the time of operation, there is a possibility of damaging a DC-DC
converter.
7.2. ON/OFF control
(Vout1)
When ON/OFF1-pin(8pin) is connected to Vin1(5,6pin)
When ON/OFF1-pin(8pin) is connected to GND or open
------- Output Voltage = OFF
------- Output Voltage = ON
(Vout2)
When ON/OFF2-pin(11pin) is connected to Vin2(13,14pin)
When ON/OFF2-pin(11pin) is connected to GND or open
------- Output Voltage = OFF
------- Output Voltage = ON
Control IC
UVLO
Circuit
7.3. Output Timing Chart
Vin
ON/OFF1
ON/OFF2
t0 ≧ 0 [ms]
t0
Vout1
1ms 5.6ms
Vout2
Note:
1ms
5.6ms
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
6
8. Reliability
8.1. Humidity Test
Subjected to a temperature 40°C±2°C with 90～95% for 100 hours.
Return to room temperature (25°C) for 4 hours and measure. The initial values in item 6.1 should be
met. (JIS-C-0022)
8.2. Thermal Cycle Test
Subjected to 5 cycle of the following.
Placed in room temperature (25°C) for 2 hours and are measured.
The initial values in item 6.1 should be met.
Step
Condition
Time
1
-20°C±3°C
30 minutes
2
Room Temp.
10～15 minutes
3
+85°C±2°C
30 minutes
4
Room Temp.
10～15 minutes
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
7
9. Test Circuit
In the following test circuit, the initial values in item 6.1 should be met.
9.1. General Measure Circuit
MYSDM3R306EENL
Vin
Ａ
Vout1
ON/OFF1
C1
C11
Vin
Vin
Vout2
ON/OFF2
GND
V
A： ：
Vr
RL
Digital Multi meter
C1～C2
C11,C21~C23
C14,C24
RVAR2
VAR2
RVAR2
C21 C22 C23 C24
Vr
( Agilent Technologies)
RM－101 equivalent
( Keisokugiken )
：
Electronic Load Device
EUL－150αXL equivalent
( Fujitsu access )
HP6654A equivalent
Ｖ
RL
Ripple Voltmeter
：
：
：
：
Ａ
GND
HP34401A equivalent
DC Power Supply
Ｖ
RL
：
：
Vr
GND
GND
C2
C14
( Agilent Technologies)
Ceramic Capacitor 22μF/25V (GRM32ER71C226KEA8 : Murata)
Ceramic Capacitor 100μF/6.3V (GRM32EC80J107ME20 : Murata)
Ceramic Capacitor 0.1μF/16V (GRM155R11C104KA88 : Murata)
Chip Resistor ±0.5% , 1/16W
※Please connect GND of the capacitor of C1 and C11 with GND-pin of No.3 and No.4.
※Please connect GND of the capacitor of C2,C21,C22 and C23 with GND-pin of No.15 and No.16.
9.2. Ripple Noise Test
L
L≦3cm
Ripple Voltmeter or Oscilloscope
Keisokugiken RM-101 equivalent
or Tektronix 460A equivalent
DC-DC
Converter
load
Terminating resistance
Keisokugiken TRC-50F equivalent
Output capacitor
Note:
Coaxial cable (1.5D-2V, L=1.5m)
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
8
10. Packaging Specification
10.1. Packing form
These are packed in a tray. (SeeFig.10-1)
10.2. The number of products in pack specification form.
32pcs/tray
If the products have fraction, may not follow this specification.
10.3. Packaging form
These trays packed products are packaging in a corrugated box alternately.
200
9.2
A
32.0
B
B'
32.0
32.0
300
32.0
289.4
A-A'
32.0
32.0
32.0
38.0
A'
44.0
44.0
44.0
34.0
189.4
B-B'
Fig.10-1
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
9
11. Production factory
Kanazu Murata Mfg. Co., Ltd.
Wakura Murata Mfg. Co., Ltd.
12. Typical Characteristics Data
3.416
3.416
3.358
3.358
Vout1 [V]
Vout1 [V]
＜Vin=10.8V~16.5V, Vout1=3.3V, Vout2=1.05V＞
3.300
3.242
3.300
3.242
3.184
3.184
11
12
13
14
15
16
11
12
13
Vin [V]
Ta=-10℃
Ta=+25℃
Ta=+70℃
Ta=-10℃
Fig.12-1a. Vin vs Vout1 (Iout1=0A)
1.087
1.087
1.069
1.069
1.050
1.032
Ta=+25℃
Fig.12-1b. Vin vs
Vout2 [V]
Vout2 [V]
14
15
16
Vin [V]
Ta=+70℃
Vout1 (Iout1=3A)
1.050
1.032
1.013
1.013
11
12
13
14
15
16
11
12
Vin [V]
Ta=-10℃
Ta=+25℃
13
14
15
16
Vin [V]
Ta=+70℃
Fig.12-1c. Vin vs Vout2 (Iout2=0A)
Ta=-10℃
Fig.12-1d. Vin
Ta=+25℃
Ta=+70℃
vs Vout2 (Iout2=6A)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
3.416
1.087
3.358
1.069
Vout2 [V]
Vout1 [V]
10
3.300
3.242
1.050
1.032
3.184
1.013
0.0
1.0
2.0
3.0
0.0
2.0
4.0
Iout1 [A]
Ta=-10℃
Ta=+25℃
Ta=+70℃
Ta=-10℃
100
100
80
80
60
40
Ta=+25℃
Fig.12-2b. Iout2 vs
Vrip2 [mVp-p]
Vrip1 [mVp-p]
Fig.12-2a. Iout1 vs Vout1 (Vin=12V)
20
Ta=+70℃
Vout2 (Vin=12V)
60
40
20
0
0
0.0
1.0
2.0
3.0
0.0
2.0
4.0
Iout1 [A]
Ta=-10℃
Ta=+25℃
6.0
Iout2 [A]
Ta=+70℃
Ta=-10℃
Fig.12-3a. Iout1 vs Vrip1 (Vin=12V)
Ta=+25℃
Fig.12-3b. Iout2 vs
100
100
90
90
Eff [%]
Eff [%]
6.0
Iout2 [A]
80
70
Ta=+70℃
Vrip2 (Vin=12V)
80
70
60
60
0
20
40
60
80
100
0
20
Iout [%]
Ta=-10℃
Ta=+25℃
Fig.12-4a. Iout vs Eff
40
60
80
100
Iout [%]
Ta=+70℃
(Vin=10V)
Ta=-10℃
Ta=+25℃
Fig.12-4b. Iout vs
Ta=+70℃
Eff (Vin=12V)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
11
100
Eff [%]
90
80
70
60
0
20
40
60
80
100
Iout [%]
Ta=-10℃
Ta=+25℃
Fig.12-4c. Iout vs Eff
Ta=+70℃
(Vin=16.5V)
Iout1 (2A/div)
Iout1 (2A/div)
Vout1 (50mV/div)
Vout1 (50mV/div)
(50μs/div)
Fig.12-5a. Load Transient Response
(Iout1=0→3A)
(50μs/div)
Fig.12-5b. Load Transient Response
(Iout1=3→0A)
Iout2 (2A/div)
Iout2 (2A/div)
Vout2 (50mV/div)
Vout2 (50mV/div)
(50μs/div)
Fig.12-5c. Load Transient Response
(Iout2=0→6A)
(50μs/div)
Fig.12-5d. Load Transient Response
(Iout2=6→0A)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
12
OFF→ON (5V/div)
OFF→ON (5V/div)
Vout1 (1V/div)
Vout1 (1V/div)
Vout2 (0.5V/div)
Vout2 (0.5V/div)
(2ms/div)
(2ms/div)
Fig.12-6a. Control Start (Vin=12V,Iout=min)
Fig.12-6b. Control Start (Vin=12V,Iout=Max)
ON→OFF (5V/div)
ON→OFF (5V/div)
Vout1 (1V/div)
Vout1 (1V/div)
Vout2 (0.5V/div)
Vout2 (0.5V/div)
(10ms/div)
(50μs/div)
Fig.12-7a. Control Stop (Vin=12V,Iout=Min)
Fig.12-7b. Control Stop(Vin=12V,Iout=Max)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
13
13. Mounting Condition
13. 1. Recommendable Solder Land Pattern
22.9
20.9
2.0
16.9
2.0
1.0
31.8
29.8
3.94
1pin
0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
3.94
1.0
Area prohibits wirings other than land.
There are wiring coppers or through-hole via at the bottom side of the DC-DC converter.
When you design your PCBs, please be careful not to short the circuit of the DC-DC converter or PCBs.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
14
13.2. Recommended Soldering Conditions
Method
: Infrared ray re-flow soldering
Profile details
Soldering temperature
Soldering time (Over 250°C)
(Over 220°C)
Preheating time
Heating rate
Times
:
:
:
:
:
:
Case surface temperature 260°C Max.
20 seconds Max. (Case surface temperature)
30 ~ 75 seconds (Case surface temperature)
60 ~ 150 seconds (150 ~ 200 °C)
3ºC/ sec. Max., 217～245ºC
1 time
260℃Max.
250℃
Case surface temperature
20 (seconds max.)
Colling curve
2～3℃/s
220℃
200℃
150℃
30～75
(seconds)
60～150
(seconds)
Soldering time
※Do not vibrate for the products on reflow.
Please need to take care temperature control because mounted parts may come off if the product
are left under the high temperature.
Do not reflow DC-DC converter as follows, because DC-DC converter may fall down from a
substrate during reflowing.
Substrate
DC-DC Converter
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
15
14. Notice
14. 1. Both input-side and output side, please make the wiring loop between plus and minus as small as possible.
The influence of leakage inductance can be reduced.
14. 2. Please design the print pattern of the main circuit as wide and short as possible.
14. 3. Please do not use a connector or a socket for connection with your board of this product.
Electrical performance may be deteriorated the influence of contact resistance.
Please be sure to mount this product with solder.
14. 4. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that
may be caused by the abnormal function or the failure of our product.
14. 5. Inrush current protection is not a feature of this product.
14. 6. Please connect the input terminal with proper polarity. If you connect wrong polarity, the DC-DC
Converter may be broken. In the case of the DC-DC Converter is damaged, abnormal input current may
flow in, and abnormal overheat of the DC-DC Converter, or some damage of your products may occur.
Please use a diode and a fuse to as following figure.
fuse
diode
+
+
IN
OUT
-
-
+
Load
Rated Fuse Current：5A
※Please select diode and fuse after confirming the operation.
14. 7 Cleaning
Please do not wash this product.
14. 8 Storage
14.8.1. Please store the products in room where the temperature/humidity is stable and direct sunlight cannot
come in, and use the products within 6 months after delivery.
Avoid damp and heated places or such places where there are large temperature changes, because
water may condense on the products, the characteristics may be reduced in quality, and/or be
degraded in the solder-ability.
If you store the products for a long time (more than 1 year), use caution because the products may
be degraded in the solder-ability and/or rusty.
Please confirm solder-ability and characteristics for the products regularly.
14.8.2. Please do not store the products in the places such as:
in a dusty place, in a place exposed directly to sea breeze, in an atmosphere containing corrosive gas
(Cl2,NH3,SO2,NOX and so on).
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
16
14. 9. Operational Environment and Operational Conditions
14.9.1. Operational Environment
The products are not waterproof, chemical-proof or rustproof.
In order to prevent leakage of electricity and abnormal temperature increase of the products,
do not use the products under the following circumstances:
(1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on)
(2) in a dusty place
(3) in a place exposed to direct sunlight
(4) in such a place where water splashes or in such a humid place where water condenses
(5) in a place exposed to sea breeze
(6) in any other places similar to the above (1) through (5)
14.9.2. Operational Conditions
Please use the products within specified values (power supply, temperature, input, output and load
condition, and so on). Input voltage drop for line impedance, so please make sure that input voltage is
included in specified values.
If you use the products over the specified values, it may break the products, reduce the quality, and even
if the products can endure the condition for short time, it may cause degradation of the reliability.
14.9.3. Note prior to use
If you apply high static electricity, over rated voltage or reverse voltage to the products, it may cause
defects in the products or degrade the reliability.
Please avoid the following items:
(1) over rating power supply, reverse power supply or not-enough connection of 0 V(DC)line
(2) electrostatic discharge by production line and/or operator
(3) electrified product by electrostatic induction
Do not give an excessive mechanical shock.
If you drop the products on the floor, etc., it may occur a crack to the core of inductors and monolithic
ceramic capacitors.
Do not give a strong shock such as a drop in handling.
14.10. Transportation
If you transport the products, please pack them so that the package will not be damaged by mechanical
vibration or mechanical shock, and please educate and guide a carrier to prevent rough handling.
If you transport the products to overseas (in particular, by sea), it is expected that the transportation
environment will be the worst, so please pack the products, in the package designed on the consideration
of mechanical strength, vibration-resistant and humidity-resistant.
The package of the products, which Murata sells in Japan, may not resist over sea transport.
Please consult us if you are to use the Murata package of the products sold in Japan for transport to
overseas.
!
Note
１. Murata recommends that customers ensure that the evaluation and testing of these devices are completed
with this product actually assembled on their product.
２. Please contact our main sales office or nearby sales office before using our products for the applications listed
below which require especially high reliability for the prevention of defects which might directly
cause damage to the third party’s life, body or property or this products for any other applications that
described in the above.
①Aircraft equipment
②Aerospace equipment ③Undersea equipment
④Power plant control equipment
⑤Medical equipment
⑥Transportation equipment (vehicles, trains, ships, etc.)
⑦Traffic signal equipment
⑧Disaster prevention /crime prevention equipment
⑨Data-processing equipment
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.
Note:
This DATA Sheet is indicated in Apr. 2011. About the written contents, since changing without a preliminary
announcement for improvement and supply are sometimes stopped, please confirm in case of ordering.
If written contents are unknown, please ask to our main sales office or nearby sales office.
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24
MYSDM3R306EENL DATA Sheet
17
!
Note
1. Murata recommends that customers ensure that the evaluation and testing of these devices are
completed with this product actually assembled on their product.
2. Please contact our main sales office or nearby sales office before using our products for the applications
listed below which require especially high reliability for the prevention of defects which might directly
cause damage to the third party’s life, body or property or this products for any other applications that
described in the above.
①Aircraft equipment
②Aerospace equipment
③Undersea equipment
④Power plant control equipment
⑤Medical equipment
⑥Transportation equipment (vehicles, trains, ships, etc.)
⑦Traffic signal equipment
⑧Disaster prevention /crime prevention equipment
⑨Data-processing equipment
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.
3. This data sheet is indicated in Mar 2014. About the written contents, since changing without a preliminary
announcement for improvement and supply are sometimes stopped, please confirm in case of ordering.
If written contents are unknown, please ask to our main sales office or nearby sales office.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
株式会社 村田製作所
http://murata.co.jp/
2014.4.24