Click Here to download this file: /data/power/MYBEA01212AZTB.pdf

MYBEA01212AZT DATA Sheet
1
DC-DC Converter DATA Sheet
MYBEA01212AZT/ MYBEA01212AZTB
Feature:
th
1/8 Brick type
Vin 36Vdc-75Vdc
Vout 12Vdc
I out 12Adc
144W
Application:
This specification applies to DC-DC Converter MYBEA01212AZT for telecommunication equipment.
Please contact us before using our products for the application except this application.
If any uncertain thing and/or suspicion arise on this English translation, such shall be entirely construed by the Japanese
original.
1. Appearance
MYBEA01212AZT,
MYBEA01212AZTB
2. Part Number
Part Number
MYBEA01212AZT
MYBEA01212AZTB
Base Plate Option
No Base Plate
With Base Plate
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
2
3. Appearance, Dimensions
3.1MYBEA01212AZT
Marking of No.1pin
58.4±0.5
Lot No.
P=3.81±0.25
3.80
P P
8
7
P
6
2
5
ZT
3
8.46±0.5
(3.68)
6-φ 1.02±0.15
4
Last two digits of
Product No.
0.50min
MFG,ID
Product No.
P
2P
22.8±0.5
2P
1
④
①②③
MYBEA 01212A_ _
3.78
50.8±0.2
2-φ 1.57±0.15
MYBEA01212AZT
Marking
(1) Parts No.
(2) MFG,ID
(3) Lot No.
Pin No.
MYBEA01212AZT
1,2,3,5,6,7
4,8
□□□□
A:Stand-off
portion
φ1.57±0.15
φ2.36±0.15
B:PCB Via
hole Insert
portion
φ1.02±0.15
φ1.57±0.15
①②③④
①Production Factory N: Wakura Murata Manufacturing Co., Ltd., T: Murata manufacturing (Thailand), Ltd
②Production Year Last number of year
③Production Month
1,2,3,…9,O,N,D
④Revision symbol
Blank (no revision)
3.2 MTBSA01212AZTB (MYBSA01212AZT with Cooling Block)
P=3.81±0.25
11.3±0.5
①②③④
MYBEA
01212
AZTB
22.8±0.5
P
3.78
58.4±0.50
(3.68)
0.5min
MYBEA01212AZTB
Terminal Specification
Sn(100%),Ni over Cupper base
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
3
P in Number, Function
Pin No.
Signal
Function
1
Vin(+)
Positive Input Voltage
2
ON/OFF
Remote ON/OFF
3
Vin(-)
Negative Input Voltage
4
Vout(-)
Negative output Voltage
5
SENSE(-)
Negative Remote Sense
6
TRIM
Output Voltage Adjustment
7
SENSE(+)
Positive Remote Sense
8
Vout(+)
Positive output Voltage
4. Absolute Maximum Ratings
Unit
Absolute Rating
V
0
Continuous
V
75
100ms
V
100
Maximum
V
7
Minimum
V
0
Item
Minimum Input Voltage
Maximum Input Voltage
Time
ON/OFF pin
Control Voltage
Remarks
Slew rate 52V/10μs
5.Rating
6.1 Operating Temperature Range
6.2 Operating Humidity Range
6.3 Storage Temperature Range
6.4 Storage Humidity Range
6.5 Maximum Wet Bulb temperature
-40℃ ~ +85℃(Please refer the temperature derating.)
20% ~ 85% (No dew deposit)
-45℃ ~ +90℃
10% ~ 95%(No dew deposit)
39℃
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
4
6. Electrical Characteristics
6.1 General Characteristics
Value
Item
Input Voltage Range
Symbol
Condition
Vin
Vin=increasing
Turn-on Input Voltage
Input Voltage difference of
Turn-on and Turn-off
Voltage applied for 1 minute
Cutoff Current:1mA
Ta=25℃±10℃,60%±15RH
Galvanic Isolation Voltage
Unit
Min.
Typ.
Max.
36
48
75
V
32
-
36
V
2.0
-
-
V
1500
-
-
Vdc
6.2 EMI,Safety Standard
Item
Noise (Radiation,
Conduction)
Safety Standard
Standard
Note
In accordance with VCCI Class A
Refer to Test Circuit in clause 10
Recognized UL60950(UL/C-UL),
Complied IEC 60950
UL file No.E190503
CE Marking
CE Mark is shown on a package
box.
6.3 Protection Cuircuit
Item
Value
Protection
If output is shorted , or output voltage is over the value specified in OVP ,
or DC-DC converter is heated abnormally, DC-DC converter will enter a hiccup
mode where it repeatedly turn on and off. After rejected the abnormal mode,
DC-DC converter will automatically restart. However output short, output over
voltage, and abnormal heating affect long-term reliability.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
5
6.4 Specific Characteristics (Ta= -40 to +85℃ with temperature derated.)
Test circuit is mentioned in section 7.
Value
Item
Symbol
Unit
Condition
Vin =Min~Max
Iout=Min~Max
Min.
Typ.
Max.
11.64
12
12.36
V
Output Voltage
Vout
Output Voltage
Adjustable Range
Vout(adj)
-20
-
+10
%
Output Current
Iout
0
-
12.0
A
Ripple Noise Voltage
Vripl
-
-
200
mV(p_p)
Efficiency
η
-
92.5
-
%
ON/OFF pin
Control Voltage
Von
0
-
0.7
V
Voff
2
-
-
V
-
5
-
ms
Vin =48V, Iout=12A
Ta=25℃
Vin =Min~Max
Iout=Min~Max
RC connected with
–Vin to Vout×90%
RC start up delay time
trc
Setting point of Over
Current Protection
OCP
Vin =Min~Max
12.36
-
-
A
Setting point of Over
Voltage Protection
OVP
Vin =Min~Max
14.4
-
-
V
External Output
Capacitance
Cout
Ceramic
capacitor
100
-
2000
μF
6.5 Weight
Value
Item
Weight
Min.
Typ.
-
21.4
Max.
Unit
g
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
6
6.6 To Adjust Output Voltage
When TRIM-pin (6pin) is left open, DC-DC converter applies nominal output voltage.
Resistors connected between TRIM-pin(6pin) to SENSE(+)-pin (7pin) will increase the output
voltage (Vo,adj) between 100% ~ 110% of the nominal output voltage(Vo,nom). (Vout-Up control)
Resistors connected between TRIM-pin(6pin) to SENSE(-)-pin (5pin) will decrease the output
voltage(Vo,adj) between 80% ~ 100% of the nominal output voltage(Vo,nom). (Vout-Down control)
The following equations give the required external-resistor value to adjust the output voltage to Vo,adj.
After calculating external resistance, it is necessary to check the output voltage and to adjust of
the resistance value at your board conditions.
1)When you increase the output voltage,
 5.1 Vo 100(%) Δ(%)  5.1 100(%)

kΩ
Radj - up=
- 10.22 1.225Δ(%)
Δ(%)


where,
Δ
Vo, adj - Vo, nom
 100(%)
Vo, nom
when you decrease the output voltage,
 5.1  100(%)

kΩ
Radj - down=
- 10.22 Δ
(%)


where,
Δ
Vo, nom - Vo, adj
 100(%)
Vo, nom
If you change output voltage, it is necessary to evaluate the characteristics of DC-DC converter at your board conditions.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
6.7
7
ON/OFF control
1) On control
ON/OFF Pin (2Pin) should be connected to Vin(-) Pin (3Pin), or keeps less than 0.7V.
2) Off control
ON/OFF Pin (2Pin) should be opened, or the current from ON/OFF Pin (2Pin) to Vin(-) Pin (3Pin) is controlled less than
30uA.
MYBEA01212AZT
2
example
3
Vin(-)
ON/OFF
or
The voltage of maximum 5V appears in the ON/OFF pin at the time of pin opening.
6.8
External input capacitor
When a inductance or a switch devise is connected to Input line, or when the transient response of input power supply is
bad, input voltage is greatly changed at the time of load sudden change of DC-DC converter.
Since the load response of DC-DC converter may not be normally demonstrated by this influence, and DC-DC converter
may cause unusual oscillation、in such a case, please connect an external input capacitor.
6.9
Output voltage remote sense
It has the remote sense function which corrects a voltage drop by the line drop from the power supply output terminal to
the load terminal .
A voltage drop by the line drop can be corrected by connecting No.5 pin and No.7 pin to the load terminal part.
At the time of a remote sense, a remote sense line is to use a shielding wire, a twist line, a side by side pattern, and so on ,
and reduce the influence of the noise.
A Output Voltage Remote Sense Range is Vout (nom) within +5%. And, use an output voltage within the output
adjustment range.
Short-circuit No.4 -No.5 terminal and No.7- No.8 terminal respectively when a remote sense shouldn't be necessary.
If you use an output voltage remote sense, it is necessary to evaluate the characteristics of DC-DC converter at your
board conditions.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
7
8
Test Circuit
In the following test circuit, the initial values in item 7 should be met.
1
10mΩ
v
v
Vin
Vin(+)
8
1mΩ
R1
v
MYBEA01212
AZT
C1
3
Vout(+)
RL
v
R2
Vin(-)
Short =ON
Open =OFF
C1:
RL:
Vin:
V :
2
Vout(-)
ON/OFF
4
Low Impedance Electrolytic Capacitor 100μf
Electronic Load Device :Model ELL355 KEISOKUGIKEN equivalent
DC Power Supply :Model HP6675A HP equivalent
Digital Multimeter :Model HP34401A HP equivalent
※When deviating from the above, DC-DC converter may operate abnormally. It should be fully confirmed on your board
before use.
※ Ripple Noise Test
50mm
DC-DC
Converter
C1
C2
LOAD
1.5m50Ω Coaxial cable
Terminating resistance
TRC-50F
Oscilloscope
BW=150MHz
C1 :
C2 :
Ceramic Capacitor
Ceramic Capacitor
0.1μF
10μF
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
9
※ Radiation Noise
Resistive load
48V
1
Clamper
KT10
(KYORITSU
CORPORATION)
3
Clamper※
100
uF
DCDC Convertor
Clamper※
MYBEA01212AZT
5pcs
External input filter
9pcs
4
2
5
※Clamper:ZCAT3035-1330(TDK)
※Conduction Noise
48V
1
LISN
(KNW407)
3
100u
F
External input
filter
2
Resistive load
DCDC Convertor
MYBEA01212AZT
4
5
External input filter
1
1mH
1mH
0.68uF
3
1uF 1uF
1uF 1uF
2
0.022uF
4
0.022uF
5
Measurement at Radiation Noise, Conductive Noise, Output ripple & Noise.
Please measure Radiation Noise, Conductive Noise and Output ripple & Noise with conforming to the Test Circuit
in section 8
Otherwise the noise might not meet the specified values.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
10
8. Mechanical Tests
8.1 Vibration
Vibration frequency
: 10~55Hz
Amplitude
: 1.5mm max
10 to 55Hz,1.5mm amplitude,1 hour for each of X,Y,Z directions.
No damage in appearance and no deviation from electrical characteristics.
8.2
Mechanical Shock
20G,1 time for each X,Y,Z directions.
No damage in appearance and no deviation from electrical characteristics.
8.3
Soldering Heat Resistance
Touch a solder iron to the pin of DC-DC Converter for 3±0.5 seconds.
Solder iron : MAX 30W , 350℃
There should be no damage in appearance.
Measure the DC-DC Converter after 2 hours and the initial values in item 7 should be met.
8.4
Pull Strength
Fasten the body of DC-DC Converter and pull the lead gradually in a radial direction with 5.0N load, keep the load for
5 seconds. The body should not be damaged thereafter.
9. Environmental Tests
1)Humidity Test
Subjected to a temperature 40℃土2℃ with 90~95% for 100 hours.
Return to room temperature (25℃) for 2 hours and measure. The initial values in item 7 should be met. (JIS-C-0022)
2) Thermal Cycle Test
Subjected to 5 cycle of the following.
Placed in room temperature (25℃) for 2 hours and are measured.
The initial values in item 6 should be met.
Step
Condition
Time
1
-40℃±3℃
30 minutes
2
Room Temp.
5~10 minutes
3
+85℃±3℃
30 minutes
4
Room Temp.
5~10 minutes
9.1 MTBF Reliability Prediction (For reference only)
MTBF is2.04million hours = 233 years
at 50% nominal output current ,Ambient Temperature Ta=40℃, calculated by Telcordia SR-332.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
11
10. Packaging Information
10.1 MYBEA01212AZT
10.1.1 Packaging form
Like the below figure, put the products on a conductive mat. (1row×8column)
Pile these conductive mats and pack maximum 4 units.
8ケ
8pcs in row
導電性マット
Conductive matt
1ケ
1pcs in
column
図4
上面図
Top view
製品
Product
Cardboard(Vary)
Corrugated
Bubble wrap
(antistatic finish)
Product
図5
Conductive
matt (2sheet)
Corrugated
Side view
Cardboard (1sheet)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
12
Item
Specification
Packaging form typical classification
Box
Dimensions of packaging box
W
= 245 ( mm )
D =
78 ( mm )
H
H = 104 ( mm )
D
W
Maximum number in a box
32( p c s )
Remark
The number of contained products may not reach to the maximum number.
Marking on the box
1. MURATA Parts Number
2. Quantity
3. Inspection No.
4. CE Mark
5. ROHS-Y / ROHS-Y
Products must not scattered in the box or product pins must not be bended in transportation.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
13
10.2 MYBEA01212AZTB
10.2.1 Tray Dimensions
DC-DC converters are packaged in the conductive trays. (See Fig.1)
Each tray is covered by tray cover.(See Fig.2)
322.5
75.0
75.0
75.0
48.8
21.45
6.0
31.0
135.9
31.0
3.5
3.5
31.0
3.5
3.5
14.0
General tolerance:±1.0
Fig.1
ESD Mark(IEC60417-5134)
5.0
B'
322.6
5.0
R5
Tray No. 2
6P
S
3.0
Recycle
Mark 1
06P
S
013
6
B-B’Cross Section
135.9
Recycle
Mark 2
A
A'
B
Tray No. 1
5.0
General tolerance:±1.0
A-A’Cross Section
Fig.2
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
10.2.2 Pieces of contained products per corrugated box.
Maximum contained products pieces 64 pcs/corrugated box.
14
Further plural sheets of corrugated cardboard are placed on the top of the tray cover according to number of contained trays in
order to full up the space in a corrugated box.
10. 2.3 Packaging Form
①
②
①Corrugated cardboard
(Suitable Adjustment)
②Tray Cover
③Tray
③
Containning products
4 tray max.
①
(330)
(68)
MURATA
PRODUCT
S
(155)
Lebel
Corrugated box
Dimension [unit : mm]of corrugated
box is reference only.
Fig.3
※
Marking on the box
・MURATA Parts Number
・Quantity
・Inspection No.
・RoHS-Y
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
15
11 Reference data
11.1 Temperature Derating <For Reference Only> of
MYBEA01212AZT
Temperature derating [ 48Vin]
14
Output Current(A)
12
Air flow
10
0.2m/s
8
0.5m/s
6
1.0m/s
4
1.5m/s
2
2.0m/s
0
0
20
40
60
80
100
Ambient Temperature Ta(℃)
MYBEA01212AZT is tested on the evaluation board (size 237x237 ,12 layers Cupper),
and the output voltage setting is 12V(Trim pin is Open).
237mm
237mm
Thermal mesurement points
①
Air flow
12Layers Cupper
Cool the thermal measure points less than 119deg show in the next page.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
16
11.2
Temperature Derating <For Reference Only> of MYBEA01212AZTB
Air flow
MYBEA01212AZTB is tested on the evaluation board (size 237x237 ,12 layers Cupper),
and the output voltage setting is 12V(Trim pin is Open).
237mm
237mm
温度測定箇所
Thermal mesurement points
①
風
Air flow
12層基板
12Layers Cupper
Cool the thermal measure points less than 100deg show in the next page.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
17
12. Electrical data
12.1. Efficiency
Ta=25℃
12.2. Output Ripple noise
Vin=48Vdc Full Load
Ta=25℃
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
12.3. Remote Control Start
Vin=48Vdc Full Load
18
Ta=25℃
RC Signal
Output Voltage
12.4. Remote Control Stop
Vin=48Vdc Full Load
Ta=25℃
RC Signal
Output Voltage
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
19
13 Notice
13.1 Soldering
13.1.1 Flux
Please solder the product with Rosin Flux, which contains chlorine 0.2wt% or less.
Please do NOT use acid flux or water-soluble flux, which could corrode metals and glass of the product.
13.1.2 Solder
Lead Free Solder
Please use solder Sn-3Ag-0.5Cu
13.1.3 Please solder under the following condition.
Condition of iron Soldering
Preheating
Iron temperature
Soldering time
:120±10℃ 30 minutes max
:350℃ max
:3 seconds max
13.1.4 Recommendable Solder Land Pattern
Pin No
Pin Size
1.Vin(+)
2.ON/OFF
3.Vin(-)
φ1.02
5.Vsens(-)
6.Trim
7.Vsens(+)
4.Vout(-)
8.Vout(+)
φ1.57
Hole diameter
Land diameter
φ1.5
φ3.0
φ2.0
φ4.0
[Unit:mm]
Recommended footprint
50.8±0.25
TROUGH HOLE φ1.5
PAD φ3.0
P
TROUGH HOLE φ2.0
PAD φ4.0
P
P
P
P=3.81±0.25
[unit:mm]
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
20
13.2 Cleaning
13.2.1 When cleaning the products, please wash the products in isopropyl alcohol for up to 5 minutes using the dipping, boiling,
and vapor methods.
Please inform us if you are to use aqueous or semi-aqueous cleaning or another methods.
Do not use ultrasonic cleaning because semiconductor device on the products, bonding wires may be broken by
resonance.
13.2.2 After cleaning, please dry the products thoroughly. If you touch the products that have not been dried enough yet,
you need to take
care because the marking of the products may get thin or blurred.
Do not measure electrical characteristics, until the products get dried enough.
13.2.3 If you use no-cleaning type flux and you don’t clean our products, please confirm the reliability of the products fully in
advance.
13.3 Storage
13.3.1 Please store the products in room where the temperature/humidity is stable and direct sunlight cannot come in and use
the products within 6 months after delivery.
Avoid damp heated places or such places where there are large temperature changes, because water may condense on
the products, the characteristics may be reduced in quality, and/or be degraded in the solderability.
If you store the products for a long time (more than 1 year), use caution because the products may be degraded in the
solderability and/or rusty.
Please confirm solderability and characteristics for the products regularly.
13.3.2 Please do not store the products in the places such as:
in a dusty place, in a place exposed directly to sea breeze, in an atmosphere containing corrosive gas (Cl2,NH3,SO2,NOX
and so on).
13.4 Operational Environment and Operational Conditions
13.4.1 Operational Environment
The products are not waterproof, chemical-proof or rustproof.
In order to prevent leakage of electricity and abnormal temperature increase of
the products, do not use the products under the following circumstances:
(1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on)
(2) in a dusty place
(3) in a place exposed to direct sunlight
(4) in such a place where water splashes or in such a humid place where water condenses
(5) in a place exposed to sea breeze
(6) in any other places similar to the above (1)through (5)
13.4.2 Operational Conditions
Please use the products within specified values (power supply, temperature, input, output and load condition, and so on).
Input voltage drop for line impedance, so please make sure that input voltage is included in specified values.
If you use the products over the specified values, it may break the products, reduce the quality, and even if the products
can endure the condition for short time, it may cause degradation of the reliability.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
21
13.4.3 Note prior to use
If you apply high static electricity, over rated voltage or reverse voltage to the products,
it macause defects in the products or degrade the reliability.
Please avoid the following items:
(1) over rating power supply, reverse power supply or not-enough connection of 0 V(DC)line
(2) electrostatic discharge by production line and/or operator
(3) electrified product by electrostatic induction
Do not give an excessive mechanical shock.
If you drop the products on the floor, etc., it may occur a crack to the core of inductors and monolithic ceramic
capacitors.
Do not give a strong shock such as a drop in handling.
Do not bend this product much more than 0.1mm.
13.5 Transportation
If you transport the products, please pack them so that the package will not be damaged by mechanical vibration or
mechanical shock,
and please educate and guide a carrier to prevent rough handling.
If you transport the products to overseas (in particular, by sea), it is expected that the transportation environment will be
the worst, so
please pack the products, in the package designed on the consideration of mechanical strength, vibration-resistant and
humidity-resistant.
The package of the products, which Murata sells in Japan, may not resist over sea transport.
Please consult us if you are to use the Murata package of the products sold in Japan for transport to overseas.
14 Production factory
Wakura Murata Manufacturing Co.,Ltd.
Murata Manufacturing(Thailand), Ltd.
!
Caution
1.Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the
abnormal function
or the failure of our product.
2. Please connect the input terminal by right polarity. If you mistake the connection , it may break the DC-DC converter. In the
case of
destruction of the DC-DC converter inside, a large input current may flow. Please add a diode and fuse as follows.
fuse
+
diode
Rated Fuse Current :
+
IN
OUT
-
-
+
Load
7A
Please select a diode and fuse after confirming the operation.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9
MYBEA01212AZT DATA Sheet
22
3.The intended use
3.1 This product is designed/manufactured for the general applications such as computers, office appliances, communication
equipment, machine tools, factory equipment, audiovisual equipment and home appliances, etc.
3.2 Please contact us before using this product for the applications, which require high reliability, such as transportation
equipment
(aircraft, trains, vehicles, etc.), traffic lights equipment, disaster prevention/crime prevention equipment, etc.
3.3 Please do NOT use this product for the applications which require especially high reliability, such as aerospace equipment,
undersea equipment, nuclear power plant control equipment, medical equipment, etc.
!
Note
1. Please make sure that your product has been evaluated and confirmed against your specifications
when our product is mounted to your product.
2. All the items and parameters in this product specification have been prescribed on the
premise that our product is used for the purpose, under the condition and in the environment agreed upon between you
and us.
You are requested not to use our roduct deviating from such agreement.
3. We consider it not appropriate to include other terms and conditions for transaction warranty in product specifications,
drawings or other technical documents.
Therefore, if your technical documents as above include such terms and conditions as warranty clause, product liability
clause,
or intellectual property infringement liability clause, we will not be able to accept such terms and conditions unless they
are based
on the governmental regulation or they are stated in a separate contract agreement.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.4.9