Product Catalog Power & Drive Quality Reliability Flexibility Ve r. 2 . 0 - 2 0 1 5 Introduction ROHM Semiconductor, a world leading manufacturer of semiconductor devices is providing a wide line-up of reliable and efficient Power Management ICs for a wide range of applications in the Industrial and Automotive Market. Applications Power Supply Integrated Power Management (PMIC) Based on long term experience with Discrete Power Devices, ROHM Semiconductor offers a broad lineup of integrated Power Management ICs for various MCU platforms and applications. This includes established cooperation with MCU manufacturers like Intel or Freescale as well as customer or application specific PMICs. DC/DC Converters & LDOs ROHM's switching regulator series are available with or without integrated FET (boost/buck/boost-buck) and from singlechannel to multi-channel system power supply configurations for broad compatibility. The new products are especially focusing on low Iq for Green Energy and high reliability applications for the Industrial Market. LED Drivers ROHM offers a broad lineup of LED drivers, such as AC/DC, DC/AC, and constant current types optimized for a variety of applications, including lighting, backlighting, camera flash, displays and automotive systems. ROHM LED drivers combine reliable LED driving with advanced brightness adjustment function and a set of protection features. Motor Drivers ROHM offers a broad lineup of H-Bridge and stepper motor drivers in a wide range of supply voltages, output currents and channels. Features like VREF-PWM conversion for H-bridge drivers, and integrated protection functions grant high reliability operation, making them ideal for a wide range of applications. 1 LED Lighting Motor Drive Providing Power Management to Intelligent Driver and Content Product Map 78 Series Regulator DC/DC Regulator with integrated MOSFET Application Specific System power supply 1117 Series Regulator DC/DC Controller with external MOSFET H3REG/H4REGTM and SLLM DC/DC Low-drop Regulator (LDO) DDR termination Regulator Linear Regulator Switching Regulator Voltage Tracker for Sensors Buck / Boost / Inversion Type Other Power ICs BiCDMOS LDO CMOS LDO Low IQ LDO Chopper / Synchronous Rectifier System DC/DC with Multiple Output Voltage / Current Mode / Constant On-Time Control Voltage Detector / Reset IC Battery Monitoring ICs USB High Side Switches Earth Leakage Detectors Isolated Converters (AC/DC & DC/DC) LED Drivers Motor Drivers Low IQ DC/DC Portfolio from Power Devices, LDOs and DC/DCs Integrated Power Management ICs Table of Contents DC/DC Converter LDOs Integrated Power Management LED Driver for Automotive LED Driver for General Lighting Motor Driver Voltage Detectors & Switches EDLC Cell Balancing IC 03 04 05 07 09 11 14 15 2 DC/DC - Converters Power Supply ROHM Semiconductor offers a large selection of specialized DC/DC – Converters for Automotive, Industrial and Consumer applications. Optimized features for each market: Industrial: Automotive: Guaranteed long lifetime product supply High-efficiency product lineup supports a wide input voltage range Available in 250pc reels High efficiency Low input voltage (<4V) Support for high switching frequencies (>2MHz) Low power consumption for primary DC/DC Wettable flank QFN packages Highlight: BD99010/1: Low quiescent current DC/DC Input Voltage Range: 3.6V to 42V Output: 3.3V or 5.0V; 2A Switching Frequency: 200 to 500kHz High Efficiency Low Quiescent Current: typ. 22μA over temperature range (-40 ~ 105°C) Integrated Power MOSFETs for synchronous rectification Integrated feedback resistors Fixed Soft Start Time (typ. 6ms) Int. Protection Function: OCP, SCP, TSD, UVLO, OVP Highlight: BD906x0: Primary P-channel DC/DC L1 PVIN SW VO D1 VIN CO R1 VIN Cbulk CIN FB RT VEN/SYNC CRT RRT EN/SYNC 3 R2 VC GND R3 C1 C2 Input Voltage Range: 3.5V to 36V Output: 0.8V to VIN; 1A, 2.5A or 4A Switching Frequency: 50KHz to 600kHz Low dropout by 100% maximum duty cycle Integrated P-channel output MOSFET External synchronization Integrated soft start (without external capacitor) Over current protection with auto re-start Int. Protection Function: SCP, TSD, UVLO LDOs ROHM Semiconductor’s lineup of LDOs offers a wide range of packages and features for ultra-low power consumption devices. LDOs for Automotive Applications Optimized Power Consumption Key Features: Offered in a wide range of packages, from high-power to compact solutions that provide greater space saving Compatible not only with conventional tantalum and electrolytic capacitors but with compact ceramic capacitors as well, in order to reduce mounting area Half the current consumption of standard products, contributing to greater energy efficiency of the entire system Applications: Automotive MCU power supplies Power supplies for car infotainment systems Iq Iq Ceramic Capacitor Compatibility Current Lineup: Output Current 1000mA 500mA 450mA BD4xxM5 Series 400mA BD7xxL5 Series BD4275 Series 300mA 200mA 180mA 150mA 100mA 40mA 30mA 10mA BD4xxM2 Series BD7xxL2 Series BD4275FP2-C BD4275FPJ-C BD433M2EFJ-C BD433M2FP3-C BD433M2WEFJ-C BD433M2WFP3-C BD433M5FP-C BD433M5FP2-C BD433M5WFP2-C BD433M5WFPJ-C BD450M2EFJ-C BD450M2FP3-C BD450M2WEFJ-C BD450M2WFP3-C BD450M5FP-C BD450M5FP2-C BD450M5WFP2-C BD450M5WFPJ-C BD733L2EFJ-C BD733L2FP-C BD733L2FP3-C BD733L5FP-C BD750L2EFJ-C BD750L2FP-C BD750L2FP3-C BD750L5FP-C Vin (Max.) [V] Vin (Min.) [V] Vout [V] Iout (Max.) [A] 45 45 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 45 45 45 45 45 45 45 45 5.5 5.5 3.9 3.9 3.9 3.9 3 3 3 3 5.5 5.5 5.5 5.5 3 3 3 3 4.37 4.37 4.37 4.17 5.8 5.8 5.8 5.6 5 5 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 5 5 5 5 5 5 5 5 3.3 3.3 3.3 3.3 5 5 5 5 0.5 0.5 0.2 0.2 0.2 0.2 0.5 0.5 0.5 0.5 0.2 0.2 0.2 0.2 0.5 0.5 0.5 0.5 0.2 0.2 0.2 0.5 0.2 0.2 0.2 0.5 Package TO263-5F TO252-J5F HTSOP-J8 SOT223-4F HTSOP-J8 SOT223-4F TO252-3 TO263-3F TO263-5F TO252-J5F HTSOP-J8 SOT223-4F HTSOP-J8 SOT223-4F TO252-3 TO263-3F TO263-5F TO252-J5F HTSOP-J8 TO252-3 SOT223-4F TO252-3 HTSOP-J8 TO252-3 SOT223-4F TO252-3 4 Power Management IC - PMIC Power Supply Based on our long experience with Discrete Power Devices, ROHM Semiconductor offers a broad lineup of integrated Power Management ICs for various MCU platforms and applications. PMICs for Intel MCU platform Developed in close cooperation with Intel, ROHM’s Power Managements ICs offer complete solutions for Intel’s embedded MCU platforms. Highlight: BD9596 BD9596 from ROHM Semiconductor is a complete system power management IC designed for the next generation Intel® AtomTM processor E3800 product family addressing In-Vehicle-Infotainment (IVI), intelligent vending, point-of-sale terminals as well as portable medical devices. Key Features: AEC-Q100 qualified Integrated 16 channels Power Supply Input voltage range: 3.5V to 5.5V Integrated solution with simple system configuration Start-up sequence and clock function Multiple protection circuits 5 Lineup of PMICs for Intel MCUs: Intel Platform Application Status BD2610GW Bay Trail - T Tablet PC Mass Production BD2614GW Bay Trail - T - CR Tablet PC Mass Production BD99990GU Broadwell - Y (CoreTM M) Mass Production BD9596MWV Bay Trail -M / D / I Ultrabook Automotive Infotainment Part No Mass Production Power Management IC - PMIC Reference Power Supply for Freescale i.MX 6 Series Key Features: Verified i.MX 6 series automotive power supply solution Greater flexibility in layout and thermal design Reference circuit and BOM list available Applications: Infotainment System (IVI : In Vehicle Infotainment) and Cluster Panel Part No BD18GA5MEFJ-M BD15GA3WEFJ-M BU28SD2MG-M BD90520EFV-C BD90540EFV-C BD90640EFJ-C BD90528EFJ-C BD90535EFJ-C BD3575FP-M BD00GA5MEFJ-M PMIC for Freescale i.MX 6 SoloLite: BD71805MWV Key Features: 2.5MHz Buck 4ch Regulators 5 LDO channels 2.0A Li Battery Charger Coulomb Counter with 15bit ADC Real Time Clock with 32kHz Osc. I2C Interface (100kHz, 400kHz, and 3.4MHz) Applications: eReaders Portable / Battery operated Devices Smart Connected Devices FPGA Power Supply Reference Board Key Features: Common power Supply Reference Board designed for Avnet Internix’s FPGA evaluation kit H3RegTM, a ROHM proprietary control method, is utilized for class-leading load response characteristics Ripple voltage less than ±30mV Applications: Power supply for FPGA BD95601MUV Input voltage (V) 4.5 to 25 Output voltage (V) 0.75 to 2.0 Reference voltage (V) Tablet PC Switching frequency Package (kHz) 200 to 500 VQFN020V4040 BD95602MUV 5.5 to 28 1.0 to 5.5 Tablet PC 150 to 500 VQFN032V5050 Part No All devices include: TSD : Thermal Shut Down, UVLO : Under Voltage Lock Out, OVP : Over Voltage Protection, OCP : Over Current Protection General-Purpose Automotive MCU System Power Supplies for Start Stop Systems The newly developed BD39001EKV-C utilizes a proprietary boost-buck switching method that ensures stable voltage supply, even in case of heavy battery voltage drops during start–stop operation, while improving power conversion efficiency by up to 5% vs. conventional products. Part No BD39001EKV Input voltage (V) 4 to 30 Breakdown 40V Output Ch 1 Output Ch 2 Output Ch 3 Frequency (kHz) Sequence Setting Reset Package Variable Boost / buck-Boost DCDC (External ET) Buck DCDC 3.3V (0.9A) LDO 5V (0.6A) 200-550 yes CH2/CH3 HTQFP48 6 LED Driver for Automotive Automotive Lighting ROHM Semiconductor offers dedicated LED drivers for various applications like cluster indicators, display backlighting, rear lamps, blinker, DRL/position/fog light as well as high and low beam. Application / Product Map: Backlight Indicators BD81A04MUV (4ch) BD81A34EFV (4ch) BD81A34MUV (4ch) BD18377EFV (12ch) BD18378EFV (12ch) BD8376FV (8ch) BD8377FV (12ch) BD8378FV (8ch) BD8379FV (12ch) DC/DC converter High Efficiency Serial-in, Parallel-out Rear lamps/ Blinker DRL/ Position/Fog High/Low beam BD8372HFP/EFJ BD8381AEFV BD18392EFV BD83732/3HFP/EFJ BD8374HFP/EFJ Constant-current driver DC/DC converter High Efficiency DC/DC LED Drivers for Exterior Lights: Part Number Topology Output Max .Input Voltage Drive Current Dimmer mode BD8381AEFV-M Buck-Boost 1ch 50V External PWM Dimming BD8362FPS-M BUCK Hysteresis 1ch 60V 2.2A PWM Dimming BD18351EFV-M Boost 1ch 70V External PWM Dimming BD1839X EFV-M Boost –Buck Off Time Control 2ch 70V 1.5A PWM Dimming 7 Oscillator De-rating LEDs Package Status HTSSOP-B28 MP TO252-S7+ In development HTSSOP-B20 In development HTSSOP-B54 In development SPI LED Driver for Automotive Constant Current LED Drivers for Exterior Lights: Part Number Topology Output Input Voltage max Drive Current Dimmer mode BD8372HFP/EFJ-M Sourcing 1ch 50V 200mA High/Low switch current BD8374HFP/EFJ-M Sourcing 1ch 50V 500mA /300mA PWM Dimming BD83732/33HFP-M Sourcing 1ch 50V 500mA PWM Dimming Oscillator Derating LEDs Disable LED OPEN PBUS Package Status HRP-7 / HTSOP-J8 MP HRP-7/ HTSOP-J8 MP HRP-7 In development Serial-in-parallel-out LED driver for Cluster Indicators Channel Number Maximum Input Voltage Maximum Output Voltage ON Resistor Serial Clock Frequency Drive Current Package Status BD8378FV 8ch 7V 35V 6Ω 1.25MHz 50mA SSOP-B16 MP BD8379FV 12ch 7V 35V 6Ω 1.25MHz 50mA SSOP-B20 MP BD18377EFV 12ch 7V 10V 6Ω 1.25MHz 50mA HTSSOP-B20 MP BD18378EFV 12ch 7V 10V 6Ω 1.25MHz 50mA HTSSOP-B28 In development Part Number Backlighting LED driver for Displays Part Number BD81A04EFV DC/DC Channel Number Maximum Input Voltage DC/DC Frequency PWM Dimming Drive Current Package Status Buck-Boost 4ch 40V 0.2-2.2MHz Min. Duty 0.02% 120mA/ch HTSSOP/VQFN MP HTSSOP/VQFN MP BD81A34EFV Buck-Boost 4ch 40V 0.2-2.2MHz Min. Duty 0.02% 120mA/ch External Low Side FET BD81A54MUV Buck-Boost 4ch 60V 0.2-2.2MHz Min. Duty 0.02% 120mA/ch VQFN In development BD9465MUV Buck-Boost 4ch 40V 0.2-2.5MHz Min. Duty 3µs 150mA/ch VQFN MP Highlight BD18377 Key Features: 12 constant current output channels 15….50 mA per output channel Channels can be combined Individual LED calibration 1.6%-100% (6bits) Optimized accuracy at 30mA: channel to channel: ± 2.5% device to device: ± 1.7% 4-line SPI compatible interface Various protection circuits (UVLO, TSD, OPEN, SHORT) ‘global’ PWM dimming 0.1-100% Daisy chain compatible (to BD8377 & BD18377) AEC Q-100 qualified for automotive Highlight BD18378 (in development) Additional Features: 6 PWMs with separate inputs (can be mapped to any channel) Diagnostics on Iref Limp home functionality Active and Passive open/short detection with own error flag PWM diagnostics Communication during over-temperature Emergency warning pin Application Example (individual brightness settings for 12 LEDs) 8 LED Driver for General Lighting General Lighting LED Driver for Lighting ROHM Semiconductor’s lineup of LED drivers for General Lighting includes small Buck controllers for low cost solutions as well as high integrated products which support various dimming options to ensure compatibility to many lighting applications. Lineup Feature BD550FHG BM2Pxxx BM520Q15F BM520Q25F BD552JLF BD552JLFV BD554FL BD555A1AFV BD555BKFV BD9207FPS BM1050F Buck / Flyback Buck / FlyInternal HV start-up & MOSFET back Internal MOSFET Buck / FlyQuasi-resonant back Current dimming Internal MOSFET Buck / FlyQuasi- resonant back Current dimming with PFC AC/DC Buck Converter & quasi Buck / Flyresonant current control back AC/DC Buck Converter & quasi Buck / Flyresonant current control back Low ripple current & quasi Fly-back resonant current control AC/DC Buck Buck / FlyConverter back High Efficiency AC/DC Buck Buck / FlyConverter back Fixed frequency DC/DC Buck Buck Converter High Power PFC Fly-back Controller Low BOM solution Application Examples 9 Topology Vin (Min.) [V] Vin (Max.) Dimming [V] Output Current (Max.) [mA] Frequency (Max.) [MHz] Operating Temperature (Min.) [°C] Operating Temperature (Max.) [°C] Package 8.5 26 - - 0.065 -40 110 SSOP6 8.9 26 - - 0.065 -40 105 SOP8 52 26 - - 0.2 -40 105 SOP8 8.9 26 - - 0.2 -40 105 SOP8 8.5 25.5 - 0.23 -40 105 SOP14 8.5 25.5 - 0.23 -40 105 SSOP-B14 16 39 PWM - 0.4 -40 100 10 38 - 800 0.3 -40 100 SSOP-B14 16 39 PWM - 0.4 -40 110 SSOP-B14 8 35 - 1500 0.9 -20 85 TO252S-5 8.5 24 - - 0.12 -40 85 SOP-24 PWM / Analog PWM / Analog SSOP-B14 LED Driver for General Lighting Highlight: BM520Qxx series for non-dimming applications AC/DC controller IC to be used in a wide range of low-cost non-dimmable LED lighting applications. Main target application is retrofit LED lighting (E27, E14, GU10, T8) Key Features: Max 150kHz switching frequency (quasi-resonant) Buck topology for non-isolated system Integrated 650V MOSFET (with different RDSon) Peak current regulation with leading-edge blanking Optional NTC controlled thermal protection Thermal Shutdown Protection (TSD) Over Voltage Protection (OVP) Under Voltage Lock Out (UVLO) Typical Application with BM520Qxx includes: EMI filter Valley boost circuit – input voltage drop protection Supply circuit - ensures stable supply voltage at the VCC pin AC/DC converter – controls the LED current Works in quasi-resonant mode boosting efficiency and improving EMI Highlight: BM555BKFV High-End solution for dimming applications Key Features: AC voltage range 80…270VAC; <10% LED current ripple Average and/or peak current regulation in buck / fly-back topology Fixed frequency DC/DC 40…400kHz Dimming compatibility Accurate 'true phase-cut' detector allows wide dimming range (<5%) Dynamic Load Current Controller (DLCC) function for stable operation with leading/trailing edge dimmers False LED activation prevention for mains-powered dimmers that require standby current Natural 'linear' dimming through logarithmic compensation Dimmer detector improves efficiency by turning off DLCC current if dimmer is not present Supports PWM and linear dimming (for non-retrofit LED lighting) Internal IC supply voltage regulator Wide input supply voltage range 15~40V Low current consumption 2mA in operation Safety & Protection Over Current Protection (OCP) Thermal Shut Down Protection (TSD) Under Voltage Lock Out Detection (UVLO) For optimal performance with TRIAC / electronic dimmers, the BD555BKFV has three main individual functions: 1. ‘True’ phase-cut detector 2. Dynamic Load Current Controller (DLCC) 3. DC/DC controller for average current and/or peak current feedback 10 Motor Driver Motor Driving Motor Drivers ROHM Semiconductor offers a broad lineup of H-Bridge and stepper motor drivers in a wide range of supply voltages, output currents and channels. Features like VREF-PWM conversion for H-bridge drivers and integrated protection functions grant high reliability operation, making them ideal for a wide range of applications. High Power Low – Mid Power Lineup H-Bridge Drivers Brushed DC Motors 7V to 36V 0.5A to 3A Stepper Driver Bipolar Stepper Motors 4V to 42V 0.8A to 3A 1-, 2- and 3-phase Drivers Brushless DC Motors 5V to 48V 0.6A to 1.2A Automotive Drivers Brushed & Brushless DC Motors 7V to 60V 1A IPM Driver Brushless DC Motors 600V 1.5A to 20A Motor Controllers Brushless DC Motors System Drivers for CD/DVD, Camera, Printer Application Examples 11 Motor Drivers H-Bridge Driver Lineup – Compatible – Easy to Use – High Reliability Rating voltage Number of channels Output current Class 0.5A Class 1.0A Class 2.0A Class 2.5A Class 3.0A 1ch BD6210 HFP / F BD67776FV BD6211 HFP / F BD6212 HFP / FP - - 1ch. - BD6736FV (Peak3.2A) BD65494MUV (Peak 2.5A) BD6376GUL - - - 2ch. - BD6735FV - - - Normal voltage 18V 1ch BD6220 F BD6221 F BD6222 HFP / FP - - 2ch BD6225 FP BD6226 FP - - - Normal voltage 20V 1ch. - BD65491FV (DC1.2A, Peak4A) BD65496MUV (Peak 5A) - - - 2ch. - BD65492MUV - - - 1ch BD6230 F BD6231 HFP / F BD6232 HFP / FP BD62222HFP BD62321HFP 2ch - BD6236 FP / FM BD6237 FM - - Low voltage 7V Low voltage 10V High voltage 36V Highlight: New Stepper Motor Driver Series BD637xx Key Features: Vcc: 36V (internal VREG) Constant current PWM Driver CLK-IN with built-in translator Full/Half/Quarter Step Full Protection (UVLO, OVLO, TSD, OCP) Mixed Decay Mode (Fast/Slow) Integrated 2bit DAC Package HTSSOP-B28 HTSSOP-B54(BD63730EFV) Io max：1.0A Io max：1.5A Io max：2.0A Io max：3.0A (BD63710EFV) (BD63715EFV) (BD63720EFV) (BD63730EFV) Highlight: New High Power BLDC Motor Drivers Key Features: ROHM PrestoMOS™ (600V) built-in Output current: 1.5A (BD6202FS) Output current: 2.5A (BD6203FS) Built-in Gate driver & Bootstrap diode Low on-resistance: 2.7Ω (typ.) Optimized for low electromagnetic interference Protection circuit with fault output (open drain) SSOP-A54_23 package VDC VCC VCC VDC 1 42 41 FOB BU 3 40 FAULT UH 5 UL 6 U SDB 39 LEVEL SHIFT & GATE DRIVER U 38 FAULT TRIP BV 37 VH 12 V VL 13 SDB 36 LEVEL SHIFT & GATE DRIVER V M 35 34 FAULT TRIP 33 VDC VDC BW 32 Applications: Air-conditioner Washing machine Refrigerator WH 20 W WL 21 SDB FOB 23 31 LEVEL SHIFT & GATE DRIVER W 30 PGND FAULT TRIP 29 PGND 28 VCC 25 27 GND SSOP-A54_42 12 Voltage Detectors & Switches Power Control Voltage Detection / Reset ICs The ROHM Semiconductor voltage detector IC series include a wide selection of Reset ICs with high accurate detection of ±1% , low current consumption, small thin packages and wide range of detection voltages. They can be used for every kind of application equipped with micro controllers, CPUs or DSPs. Both CMOS and open drain output are available. Default SSOP packages are pin- and function-compatible, so they can be used as replacement for existing IC. Besides, a lineup of very small and thin packages allows compact layout implementation very close to the micro controllers. Lineup 14 EDLC Cell Balancing IC BD14000EFV-C: EDLC Cell Balancing IC ROHM Semiconductor offers the Industry’s First Monolithic EDLC Cell Balancing IC that contributes to increased miniaturization, greater stability and longer life for EDLCs (Electric Double Layer Capacitors). The BD14000EFV-C integrates over 20 discrete components required for EDLC cell balancing on a single chip. Reducing mounting area by 38% over conventional solutions while eliminating component variations, making it easy to configure compact, high reliability EDLC systems. Key Features: Self-contained EDLC balancing function Supports 4 to 6 cells connected in series Shunt resistor method for simple cell balancing operation Adjustable detection voltage ensures compatibility with a variety of EDLC output voltages (2.4 to 3.1 V in 0.1 V steps) Multi-stage IC connection possible, enabling easy scalability Reliable control/overvoltage detection and self-check functions AEC-Q-100 Qualified Specification Input Voltage Range: 8.0V to 24.0V Cell Detection Voltage: 2.4V to 3.1V Detection Accuracy：±1% Shunt switch FET incl.: 1Ω (Typ.) Ta: -40oC - 105oC HTSSOP-B30 (10.0 x 7.6 x 1.0 mm) Block Diagram Applications: EVs, HEVs, and stop-start-equipped vehicles Regenerative energy storage systems for industrial machinery and construction equipment Power stabilization devices such as UPS *EDLC (Electric Double Layer Capacitor): EDLCs or Supercapacitors provide the highest capacitance values per unit volume and the greatest energy density of all capacitors. They bridge the gap between capacitors and rechargeable batteries. While existing EDLCs have energy densities that are approximately 10% of a conventional battery, their power density is generally 10 to 100 times higher. This makes charge and discharge cycles of EDLCs much faster than batteries. Additionally, they tolerate more charge and discharge cycles than batteries. 15 The content specified in this document is correct as of 1st April, 2015. No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. ROHM Sales Offices San Diego Atlanta Boston Chicago Dallas Denver Detroit Nashville Sunnyvale +1-858-625-3630 +1-770-754-5972 +1-978-371-0382 +1-847-368-1006 +1-972-473-3748 +1-303-708-0908 +1-248-348-9920 +1-615-620-6700 +1-408-720-1900 Mexico Düsseldorf Stuttgart France UK Espoo Salo Oulu Spain Catalog 04.2015 ROHM © 2000 NZ Contact us for further information about the products. +52-33-3123-2001 +49-2154-9210 +49-711-7272-370 +33-1-4060-8730 +44-1-908-272400 +358-9725-54491 +358-2-7332234 +358-8-5372930 +34-9375-24320 Italy Hungary Poland Russia Seoul Dalian Shanghai Shenzhen Hong Kong +39 0362 99 4375 +36-1-4719338 +48-22-5757213 +7-495-739-41-74 +82-2-8182-700 +86-411-8230-8549 +86-21-6279-2727 +86-755-8307-3008 +852-2-740-6262 Taipei Kaohsiung Singapore Philippines Thailand Malaysia Kyoto Yokohama +886-2-2500-6956 +886-7-237-0881 +65-6332-2322 +63-2-807-6872 +66-2-254-4890 +60-3-7958-8355 +81-75-365-1218 +81-45-476-2121