OPTOTRONIC Compact LED drivers (01/16)

www.osram.com/optotronic
Light is reliable
OPTOTRONIC® Compact
LED drivers
Compact indoor drivers with a multitude of features:
OPTOTRONIC® Intelligent DALI, FIT and ECO
Light is OSRAM
OPTOTRONIC® Compact | Introduction
Excellent reasons to choose
OPTOTRONIC® drivers
With our OPTOTRONIC® drivers, users benefit from high-performance products that are
characterized by high reliability, efficiency, flexibility and quality:
1. M
aximum reliability thanks to long experience:
Re-use of know-how from well-proven OSRAM ECGs
­(electronic control gears) such as HALOTRONIC®,
­POWERTRONIC® and ­QUICKTRONIC®.
2. P
remium lighting quality: Applications such as hospitality,
museums or offices require the latest technology for the
best quality of light (analog dimming and low ripple). The
latest generation of OPTOTRONIC® Compact can be used
when “mobile-camera-friendly”, “slow motion r­ ecording”
and “smooth dimming” are key for success.
3. High energy efficiency: Up to 91 % (full load) and further
energy saving with proprietary OSRAM light management
systems (LMS).
4. Freedom of design: Same driver for built-in and in­
dependent mounting through optional kits, small form
­factors and similar to ECGs for traditional lamps.
2
5. F
lexibility of application: Suitable for PrevaLED® ­modules,
CoB (chip-on-board) LEDs and other modules available in
the market.
6. W
ide product portfolio: Various product families, ­window
drivers, dimmable products and different wattages.
Future-proof solutions
Using OPTOTRONIC® drivers not only means using durable,
high-performance products but also staying flexible in terms
of future application: OPTOTRONIC® drivers can be perfectly
adjusted for their respective tasks and, if required, also be
optimized later on by means of top-quality accessories
(e.g. cable clamps) from OSRAM.
OPTOTRONIC® Compact | Introduction
OPTOTRONIC® Compact LED drivers
OPTOTRONIC® Compact drivers are the perfect solution for a wide variety of luminaire types and applications.
Developed for spotlight and downlight applications as well as LED panels, the OPTOTRONIC® Compact drivers offer
you ­maximum flexibility in the design of all your LED-based luminaires. Designed for the needs of your customer!
OPTOTRONIC® is a global brand with products suitable for the Americas. Please consult your sales contact for
more information.
Main benefits at a glance
—— Extensive portfolio: The right driver for each application
—— Compact size for more creative freedom in luminaire design
—— Housing adapted from well-known and proven traditional
ECGs for easy installation into existing luminaires
—— High level of efficiency and reliability
—— Fully programmable and digital platform – see
­OPTOTRONIC® Intelligent DALI on pages 8 to 11
Where can OPTOTRONIC® Compact drivers be used?
Pendant luminaires (round)
Wall and ceiling luminaires
Home and decorative lighting
(round)
Application areas
—— Offices, e.g. reception areas and
boardrooms
—— Restaurants
—— Public buildings, e.g. airports,
­cinemas, ­theaters, exhibition halls,
schools and gyms
—— High-end shops
—— Retail outlets, e.g. supermarkets,
bakeries, butcher shops and shops
for leather goods
Spotlights
Downlights
3
OPTOTRONIC® Compact | Introduction
Our OPTOTRONIC® Compact portfolio
OSRAM is proud to present: Three product families that meet all your requirements
OTi
DALI
OT
FIT
OTe
4
OPTOTRONIC® Intelligent DALI
Highest efficiency, full flexibility and maximum reliability
OPTOTRONIC® FIT
High efficiency and maximum reliability
OPTOTRONIC® ECO
Cost-efficient and compact
OPTOTRONIC® Compact | Introduction
OPTOTRONIC® Compact driver portfolio
OTi
DALI
OT
FIT
OTe
Dimmable (DALI): Fixed output:
OPTOTRONIC®
Dimming
Intelligent DALI
Comfort dimming AM+PWM/FULL AM
Lowest dimming level
1 %
Fixed output:
Dimmable (PC):
OPTOTRONIC® FIT OPTOTRONIC® ECO
OPTOTRONIC® ECO
3 currents settable
Phase Cut
10 %
DALI DT6
Type of dimming
OTe
Trailing- or leadingedge phase control
Touch DIM®
Corridor function
DC operation
Emergency lighting 1)
Fixed DC level
Output current
Adjustable DC level
(by software)
Adjustable
(by software
(CS)
(CS)
and/or resistor)
Current tolerances [%]
5 10 5
10
Ripple at 100 Hz [%]
< 2
< 5
< 20...< 30
< 25...< 35
Functions and
Overtemperature protection
performances
Hot plug-in
CLO
Stand-by losses [W]
< 0.5
Input voltage range [V]
220-240
220-240
220-240
220-240
Lifetime [h]
100 000 2)
100 000 2)
50 000 3)
50 000 2)
Ta range [°C]
-20…+50
-25…+50
-20…+50
-20…+50
Suitable for luminaire class
I + II
I + II
I + II
I + II
1) A
ccording to IEC 61347-2-13
2) Operation at max. Tc -10 K, maximum failure rate of 10 %
3) Operation at max. Tc -5 K, maximum failure rate of 10 %
AM = Amplitude Modulation
PWM = Pulse Width Modulation
DT6 = DALI Device Type 6
CS = Current Setting
CLO = Constant Lumen Output
Ceiling installation with cable clamps
OPTOTRONIC® Compact indoor drivers from
­OSRAM can easily be retrofitted with suitable
cable clamps, if required. This way, in case an
­independent installation is required, the same
­driver can be used with the additional cable clamp.
For through-wiring, the TL version is available for
on/off and DALI ­versions.
OTe 35/220-240/700 CS
OTe 25/220-240/700 CS
OT cable clamp
B-Style TL
5
OPTOTRONIC® Compact | Introduction
6
OPTOTRONIC® Compact | Introduction
Guarantee and product identification
Applicable guarantee periods and OSRAM nomenclature/marking
Guarantee
OSRAM is committed to the high quality of its products.
Any product that has failed because of a material or manufacturing defect will be refunded or given a credit note. The
following guarantee periods apply to the OPTOTRONIC®
Compact drivers:
OPTOTRONIC®
OPTOTRONIC®
OPTOTRONIC®
OPTOTRONIC®
Intelligent DALI
FIT
ECO CS/CS S
ECO PC
5
5
5
5
years 1)
years 1)
years 1)
years 2)
5
Year
OSRAM
Guarantee
All details on relevant guarantees and the
general requirements can be found at:
www.osram.com/guarantee
Project-specific guarantees on request.
1) O
perating time of no more than 5 000 hours per year, not ­exceeding
max. allowed Tc temperature
2) O
perating time of no more than 5 000 hours per year, o
­ peration at
max. Tc -10 K
Nomenclature and marking (example)
Product family and dimming
OTi DALI: OPTOTRONIC® Intelligent DALI
OT FIT: OPTOTRONIC® FIT
OTe: OPTOTRONIC® ECO
Power (out) 3)
10: 10 W
13: 13 W
15: 15 W
18: 18 W
25: 25 W
35: 35 W
50: 50 W
Supply voltage
220-240: 220-240 V
Output current (max.)
350: 350 mA
420: 420 mA
500: 500 mA
700: 700 mA
1A0: 1000 mA
1A4: 1400 mA
Control (current)
CS: Current setting
PC: Phase cut
LT2: LEDset 2nd Generation
Additional features
S: For built-in installation only
FAN: 12 V auxiliary output for
active cooling (fan)
OTe 35 220-240 700 CS S
3) For detailed power values, please see product data sheet (www.osram.com)
7
OPTOTRONIC® Compact | OTi DALI
OTi
DALI
OPTOTRONIC® Intelligent DALI
Highest efficiency, full flexibility and maximum reliability
EL
5
Year
OSRAM
Guarantee*
Through
DALI
DALI
wiring Mains
CORRIDOR
ON
OFF
Soft
switch off
FUNCTION
TOUCH DIM
SENSOR
SMART
GRID
OPTOTRONIC® Intelligent (OTi) DALI driver
Product features
— Window driver with adjustable output current via DALI
or LEDset2 interface (resistor)
— Suitable for class I and class II luminaires
— Lifetime of up to 100 000 hours 1) and high ambient
temperature of up to +50 °C
— Improved protection of LED modules thanks to hot
plug-in function with automatic switch-on of light
— Stepless and color-consistent dimming with DALI
(from 100 % to 1 %, hybrid (comfort) dimming/full
amplitude dimming)
— Amplitude dimming (OTi DALI 15)
— Programmable features: CLO (constant lumen output), corridor function, Touch DIM® (Sensor), emergency lighting
— Suitable for emergency lighting systems with central
battery according to IEC 61347-2-13
— Soft switch-off; enabling best experience of light (recommended for cinemas, theaters, decorative lighting etc.)
Technical data
NEW
Uout
Pout
Eff. max.
Ta
Isolation
Ripple at
(%)
88
(°C)
(°C)
(%)
-20…50 70/60 50 k 2)/100 k 1) 5
SELV
100 Hz (%)
<1
12…54 86
-20…50 75/65 50 k 2)/100 k 1) 5
SELV
<2
15…54 86
-20…50 75/65 50 k 2)/100 k 1) 5
SELV
<2
15…54 91
-20…50 75/65 50 k 2)/100 k 1) 5
SELV
<2
Product reference
Iout
OTi DALI 15/220-240/1A0 LT2
(mA)
(V)
(W)
150-1050 7.5-54 3-18
OTi DALI 25/220-240/700 LT2
180-700
12-54
OTi DALI 35/220-240/1A0 LT2
350-1050 15-54
OTi DALI 50/220-240/1A4 LT2 FAN 600-1400 15-54
Product reference
Product
LxWxH (mm)
Tc
Lifetime (h)
Cable clamp
Product number Packaging PrevaLED®
number
OTi DALI 15/220-240/1A0 LT2
OTi DALI 25/220-240/700 LT2
OTi DALI 35/220-240/1A0 LT2
4052899324879 95x53x30
4052899919457 103x67x29.5
4052899919440 103x67x29.5
OTi DALI 50/220-240/1A4 LT2 FAN 4052899919433 110x75x25
Iout accur.
Cable clamp
(pcs)
OT CABLE CLAMP F-STYLE
4052899325555
20
OT CABLE CLAMP B-STYLE
4052899077881
20
OT CABLE CLAMP B-STYLE TL
4052899268227
20
OT CABLE CLAMP B-STYLE
4052899077881
20
OT CABLE CLAMP B-STYLE TL
4052899268227
20
OT CABLE CLAMP A-STYLE
4052899089570
20
OT CABLE CLAMP A-STYLE TL
4052899325982
20
match
OT cable clamps
Thanks to additional cable clamps, each OTi DALI driver can be used
for built-in as well as independent installation. The cable clamp with
through-wiring (A-Style TL and B-Style TL) allows for the easy and costefficient installation of multiple luminaires.
A-Style
A-Style TL
B-Style
B-Style TL
F-Style
* For details on our guarantee requirements, go to www.osram.com/guarantee
1) Operation at max. Tc -10 K, maximum failure rate of 10 %
2) At max. Tc temperature, maximum failure rate of 10 %
8
OPTOTRONIC® Compact | OTi DALI
Individual DALI programming
OTi DALI Compact drivers offer wide operating windows and
thus ensure a high degree of flexibility. Therefore, LED generation upgrades can be easily managed, allowing for futureproof solutions, and the number of different product versions
in the warehouse can be reduced.
OPTOTRONIC® Intelligent DALI operating range
Adjustment of the current is possible in three different ways:
—— Programming by OSRAM software (T4T Proggy Probe 48 V)
—— Use of a simple resistor (LEDset2)
—— Automatic recognition via the LEDset2 interface when
connected to certain PrevaLED® or other LED modules
with LEDset wire
54
OTi DALI 15/220-240/1A0 LT2
OTi DALI 25/220-240/700 LT2
OTi DALI 35/220-240/1A0 LT2
OTi DALI 50/220-240/1A4 LT2 FAN
Voltage [V]
40
25
Various operating windows are optimized for different general
lighting applications and target lumen packages. Please find
out more about the programming feature on page 10.
10
0
350
700
1050
1400
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
Example:
OTi DALI 50/220-240/1A4 LT2 FAN:
Voltage: 15–54 V
Current: 600–1400 mA
9
OPTOTRONIC® Compact | OTi DALI
OPTOTRONIC® Intelligent DALI
OTi
DALI
Special OTi features go way beyond the normal DALI standard
New flexibility thanks to programmable
DALI LED ­drivers
The DALI LED drivers of the second generation (OSRAM D
­ ALI)
allow for full digital programming via the DALI magic hardware
and a specific free OEM software:
—— Tuner4TRONIC® (T4T)
—— No need for an external resistor to set the current in case
of digital programming
—— Settings can be locked to prevent unauthorized changes
OEMs can download T4T at:
www.osram.com/T4T
CORRIDOR
FUNCTION
Corridor function 1)
The corridor function provides direct connection to commercially available motion sensors. A pre-installed program runs
“out of the box” in the device. It can be individually adjusted via
DALI magic and Tuner4TRONIC®. Three dimming levels and
the associated overrun times can be adjusted individually as
­required. Advantage: Simple and energy-efficient lighting in
­application areas such as stairwells, corridors and parking blocks.
EL
SMART
GRID
SMART GRID
The OSRAM DALI LED drivers can monitor the power consumption, the lamp operating hours (resettable) and the operating temperature of the driver. Advantage: SMART GRID
can also analyze the lighting, thus allowing for an even more
efficient operation of the system.
TOUCH DIM
SENSOR
Touch DIM® function 1)
The Touch DIM® function offers a simple and cost-effective
way of manual dimming and switching of up to 20 OTi DALI
LED drivers via standard pushbuttons. Moreover, the lighting
level can be automatically controlled with special, directly
connectable Touch DIM® light and presence sensors, leading
to energy savings of more than 50 %. In addition to this plug
& play functionality, the Touch DIM® function also allows an
­individual parameterization via DALI magic and Tuner4TRONIC®.
Emergency light (according to IEC 61347-2-13)
OTi DALI and OT FIT drivers have an EL quality label and are
designed for emergency lighting according to IEC 61347-2-13.
In addition to the functions used in accordance with the DALI
standard, e.g. system failure level (fractionation of the control
line), DALI LED drivers offer an optional automatic detection
of the DC supply, which sets a pre-programmed luminous
flux between 0 and 100 % (factory setting: 15 %). This variably
adjustable luminous flux value is protected from inadvertent
overwriting by a locking bit. The setting can be carried out
via the bus system or DALI magic and Tuner4TRONIC®.
CLO
CLO (constant lumen output)
The CLO functionality is an essential part of OSRAM DALI
LED drivers. Activating this function provides stable lighting
conditions over the entire lifetime of LED modules. Year by
year, the lumen output of LED modules decreases due to the
loss of phosphoric components. In order to balance this out,
the CLO function increases the output current smoothly over
the entire lifetime of the modules – it typically starts with 85 %
of the LED power. This not only ensures stable lighting but
also saves energy and increases the lifetime of the LEDs.
1) Useful information for the installation of the Touch DIM® and corridor function can be found in the technical application guide Q
­ UICKTRONIC®
­Intelligent DALI DIM (www.osram.com/oem-download)
10
OPTOTRONIC® Compact | OTi DALI
LEDset 2nd Generation standardization
With the experience gained from the LEDset technology and
as a reaction to the growing demand of OEMs to introduce a
standardized multi-vendor electrical interface for SSL systems,
OSRAM now presents an enhanced version of LEDset with
plenty of new features: LEDset 2nd Generation.
A smart electrical interface between the LED driver and the
LED modules is the missing link essential to the maturity of
the SSL components business. With the LEDset 2nd Generation standardized electrical interface for SSL systems,
­OSRAM offers a technology that closes this link and fully
matches the requirements:
—— Cost-efficient
—— Reliable
—— Easy and ready to use
LEDset 2nd Generation is an analog 3-wire interface, including
LED supply, allowing basic communication between an LED
driver and one or more LED modules. The interface supports
the following main functions:
—— Output current setting of constant-current drivers to single
LED modules as well as to series/parallel-connected LED
modules
—— Best matching of driver and modules working point
(e.g. lm/W)
—— Self-configuration according to system structure, automatic tracking of technology development (future-proof)
—— Easy mode of operation (plug & play)
—— Additional monitoring and protection features
(e.g. ­thermal protection of the LED modules)
—— Added value for OEMs: reliable TCO proposition,
reduced structural costs
Several OSRAM LED modules, e.g. PrevaLED® Cube and
PrevaLED® Core, support the LEDset 2nd Generation and
therefore offer huge advantages in system combinations.
Hybrid (comfort) dimming technology
OPTOTRONIC® Intelligent DALI LED drivers dim from 100 %
to 1 %. In order to achieve optimum dimming, e.g. by ensur­
ing that it is not visible and by avoiding stroboscopic effects,
OSRAM combines two dimming methods: amplitude modulation and pulse width modulation (PWM).
From 100 % to around 30 %, the drivers are dimmed by
amplitude modulation. This is done by the adjustment of the
current amplitude: the amplitude is decreased to dim the
lighting down. The dimming levels between 1 % and around
30 % are con­trolled by pulse width modulation (PWM). This
combination offers the best way to ensure a smooth, non-­
flicker dimming behavior.
Hybrid dimming
Integral current value
(PWM with ~ 500 Hz)
Output current [%]
50
0
100
Amplitude
modulation
~ 30
PWM
1
Dimming level [%]
High-quality, smooth and mobile-camera-friendly dimming is
realized by amplitude dimming. OTi DALI 15 is the first product
enabling high-quality dimming down to 1 % in the entire
­operating window.
Amplitude dimming
Output current [%]
50
0
100
Amplitude
modulation
1
Luminous flux [%]
11
OPTOTRONIC® Compact | OT FIT
OT
FIT
OPTOTRONIC® FIT
High efficiency and maximum reliability
EL
5
Year
OSRAM
Guarantee*
Through
wiring Mains
OPTOTRONIC® FIT (OT FIT) driver
Product features
—— Three selectable output currents (CS = current setting)
—— Suitable for class I and class II luminaires
—— Lifetime of up to 100 000 hours 1) and high ambient
­temperature of up to +50 °C
—— Improved protection of LED modules thanks to hot
­plug-in function
—— Low ripple for a higher quality of light
—— Suitable for emergency lighting systems with central
­battery according to IEC 61347-2-13
Technical data
Product reference
Iout
Uout
Pout
Eff. max. Ta
Lifetime (h) Iout accur.
Isolation
Ripple at
OT FIT 15/220-240/350 CS
(mA)
250/300/350
(V)
27-54
(W)
7-19
(%)
≥ 83
(°C)
(°C)
-25…50 75/65
(%)
50 k 2)/100 k 1) 10
SELV
100 Hz (%)
< 5
OT FIT 25/220-240/500 CS
400/450/500
27-54
11-27
≥ 85
-25…50 75/65
50 k 2)/100 k 1) 10
SELV
< 5
OT FIT 35/220-240/700 CS
OT FIT 50/220-240/1A0 CS
550/600/700 27-54
800/900/1050 27-54
15-37.5
56
≥ 87
≥ 89
-25…50 75/65
-25…50 75/65
50 k 2)/100 k 1) 10
50 k 2)/100 k 1) 10
SELV
SELV
< 5
< 6
Tc
Product reference
Product number
LxWxH (mm)
Cable clamp
Product number Packaging PrevaLED®
OT FIT 15/220-240/350 CS
4052899919426
103x67x29.5
OT CABLE CLAMP B-STYLE, ... TL see page 8
20
OT FIT 25/220-240/500 CS
4052899919419
103x67x29.5
OT CABLE CLAMP B-STYLE, ... TL see page 8
20
OT FIT 35/220-240/700 CS
OT FIT 50/220-240/1A0 CS
4052899919402
103x67x29.5
103x67x29.5
OT CABLE CLAMP B-STYLE, ... TL see page 8
20
OT CABLE CLAMP B-STYLE, ... TL see page 8
20
Cable clamp
4052899166318
OT cable clamps
Thanks to additional cable clamps, each OT FIT driver can
be used for built-in as well as independent i­nstallation. The
cable clamp with through-wiring (B-Style TL) allows for the
easy and cost-efficient installation of multiple luminaires.
B-Style
* For details on our guarantee requirements, go to www.osram.com/guarantee
1) O
peration at max. Tc -10 K, maximum failure rate of 10 %
2) A
t max. Tc temperature, maximum failure rate of 10 %
12
B-Style TL
(pcs)
match
OPTOTRONIC® Compact | OT FIT
Multiple current setting
Each OPTOTRONIC® FIT driver offers three selectable
currents. Multiple current setting has two main advantages:
It reduces the number of different product versions in the
warehouse and steps between currents are kept small
(starting from 50 mA), avoiding any need for LED drivers
with intermediate currents.
OPTOTRONIC® FIT operating range
Features of the current setting
—— CS (current setting) of OT FIT offers the easiest way to
choose the output current and to avoid typical m
­ istakes
when using DIP switches
—— Each product offers at least one or two typical currents
used in the market and, by default, the highest standard
current is provided
40
OT
OT
OT
OT
Voltage [V]
FIT 15/220-240/350 CS
FIT 25/220-240/500 CS
FIT 35/220-240/700 CS
FIT 50/220-240/1A0 CS
54
25
10
0
350
700
1050
1400
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
Example:
OT FIT 50/220-240/1A0 CS:
Voltage: 27–54 V
Current: 800/900/1050 mA
13
OPTOTRONIC® Compact | OTe
OTe
OPTOTRONIC ECO
®
Cost-efficient and compact
5
Year
OSRAM
Guarantee*
Through
wiring Mains
Product features
—— Three selectable output currents (CS = current setting)
—— Suitable for class I and class II luminaires
—— Lifetime of up to 50 000 hours 1) and high ambient
­temperature of up to +50/55 °C
—— Several housing designs for different applications (track
lighting, downlights and spotlights) with form factor
derived from conventional ECGs
—— More than 10 different selectable currents for o
­ verdriving/
underdriving of LEDs
OPTOTRONIC® ECO driver (OTe 35/220-240/700 CS S)
Housing (A)
Technical data
Product reference
Iout
Uout
Pout
Eff. max. Ta
Iout accur.
Isolation
Ripple at
OTe 25/220-240/420 CS
OTe 25/220-240/700 CS
(mA)
290/350/420
500/600/700
(V)
27-54
18-36
(W)
8-23
9-25
(%)
≥ 85
≥ 85
(°C)
(°C)
(h)
-20…50 75/65 35 k 2)/50 k 1)
-20…50 80/70 35 k 2)/50 k 1)
(%)
5
5
SELV
SELV
100 Hz (%)
< 20
< 25
OTe 35/220-240/700 CS
500/600/700
27-54
13-37
≥ 87
-20…50 75/65 35 k 2)/50 k 1)
5
SELV
< 25
OTe 35/220-240/700 CS S
500/600/700
27-54
13-37
≥ 87
-20…50 80/70 35 k 2)/50 k 1)
5
SELV
< 25
OTe 35/220-240/1A0 CS
800/925/1050
17-34
14-36
≥ 87
-20…50 80/70 35 k 2)/50 k 1)
5
SELV
< 30
OTe 35/220-240/1A0 CS S
800/925/1050
17-34
14-36
≥ 87
-20…50 80/70 35 k 2)/50 k 1)
5
SELV
< 25
OTe 50/220-240/1A0 CS
800/925/1050
27-54
22-56
≥ 87
-20…50 85/75 35 k 2)/50 k 1)
5
SELV
< 20
OTe 50/220-240/1A4 CS
1150/1250/1400 18-36
21-50
≥ 87
-20…50 80/70 35 k 2)/50 k 1)
5
SELV
< 25
22-56
≥ 88
-20…50 95/85 35 k 2)/50 k 1)
5
SELV
< 30
OTe 50/220-240/1A0 CS FAN 700/900/1050
27-54
Tc
Lifetime
Product reference
Product number LxWxH (mm)
Cable clamp
Product number Packaging PrevaLED®
Cable clamp
(pcs)
OTe 25/220-240/420 CS
4052899917538
97x43x29.5 (C)
OT CABLE CLAMP D-STYLE
4052899077904
40 3)
OTe 25/220-240/700 CS
4052899917545
97x43x29.5 (C)
OT CABLE CLAMP D-STYLE
4052899077904
40 3)
OTe 35/220-240/700 CS
4052899917569
4052899917552
OTe 35/220-240/1A0 CS
4052899917668
OTe 35/220-240/1A0 CS S
4052899917651
103x67x29.5 (B) OT CABLE CLAMP B-STYLE, ... TL see page 8
110x43x29.5 (A) built-in installation only
–
103x67x29.5 (B) OT CABLE CLAMP B-STYLE, ... TL see page 8
110x43x29.5 (A) built-in installation only
–
20
OTe 35/220-240/700 CS S
OTe 50/220-240/1A0 CS
4052899917576
20
OTe 50/220-240/1A4 CS
4052899917583
103x67x29.5 (B) OT CABLE CLAMP B-STYLE, ... TL see page 8
103x67x29.5 (B) OT CABLE CLAMP B-STYLE, ... TL see page 8
OTe 50/220-240/1A0 CS FAN 4052899919396
103x67x29.5 (B) OT CABLE CLAMP B-STYLE, ... TL see page 8
20
match
–
20
–
20
OT cable clamps
Thanks to addi­tional cable clamps, most of the OTe drivers can be used
for built-in as well as independent installation. The cable clamp with through-­
wiring (B-Style TL) allows for the easy and cost-efficient i­nstallation of
­multiple luminaires.
B-Style
B-Style TL
D-Style
* For details on our guarantee requirements, go to www.osram.com/guarantee
1) Operation at max. Tc -5 K, maximum failure rate of 10 %
2) At max. Tc temperature, maximum failure rate of 10 %
3) Two cable clamps D-Style needed per OTe
14
OPTOTRONIC® ECO driver
OPTOTRONIC® ECO driver
(OTe 50/220-240/1A0 CS)
(OTe 25/220-240/420 CS)
Housing (B)
Housing (C)
OPTOTRONIC® Compact | OTe
Multiple current setting
Each non-dimmable OPTOTRONIC® ECO driver offers three
selectable currents. Multiple current setting has two main
­advantages: It reduces the number of different product versions
in the warehouse and steps between currents are kept small
(starting from 60 mA), avoiding any need for LED drivers with
intermediate currents.
Freedom of LED current setting
—— Each product offers at least one or two typical currents
used in the market
—— More than 10 different currents are available up to 1.4 A
—— Two voltage ranges with partial overlapping ­(18–36 V/27–54 V
or 17–34 V/27–54 V) provide high flexibility, ensuring that
the right driver is used for existing and coming CoB technologies as well as single LED chains
Features of the current setting
—— CS (current setting) of OTe offers the easiest way to
choose the output current without the need for acces­
sories (resistor, wire etc.) and to avoid typical mistakes
when using DIP switches
—— Current setting is provided at the output side, isolated
from the mains and at a low safety voltage below 60 V
OPTOTRONIC® ECO operating range – OTe 25
OPTOTRONIC® ECO operating range – OTe 35
OTe 25/220-240/420 CS
OTe 25/220-240/700 CS
Voltage [V]
Voltage [V]
40
40
25
25
10
10
0
350
700
1050
1400
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
0
OTe 35/220-240/700 CS
OTe 35/220-240/1A0 CS
350
700
OTe 35/220-240/700 CS S
OTe 35/220-240/1A0 CS S
1050
1400
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
OPTOTRONIC® ECO operating range – OTe 50
OTe 50/220-240/1A0 CS
OTe 50/220-240/1A0 CS FAN
OTe 50/220-240/1A4 CS
Voltage [V]
40
25
10
0
350
700
1050
1400
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
Example:
OTe 50/220-240/1A0 CS FAN:
Voltage: 27–54 V
Current: 700/900/1050 mA
15
OPTOTRONIC® Compact | OTe
OPTOTRONIC® ECO operating range – OTe 10 (dimmable)
OPTOTRONIC® ECO operating range – OTe 13 (dimmable)
Voltage [V]
Voltage [V]
OTe 10/220-240/700 PC
40
40
25
25
10
10
0
600
700
800
900
0
OTe 13/220-240/350 PC
250
350
450
Current [mA]
550
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
For detailed data, please see product data sheet (www.osram.com)
OPTOTRONIC® ECO operating range – OTe 18 (dimmable)
OPTOTRONIC® ECO operating range – OTe 25 (dimmable)
OTe 18/220-240/350 PC
OTe 18/220-240/500 PC
Voltage [V]
Voltage [V]
40
40
25
25
10
10
0
250
350
450
550
0
OTe 25/220-240/700 PC
600
700
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
For detailed data, please see product data sheet (www.osram.com)
OTe 35/220-240/700 PC
40
25
10
0
600
700
800
900
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
900
Current [mA]
OPTOTRONIC® ECO operating range – OTe 35 (dimmable)
Voltage [V]
800
Example:
OTe 35/220-240/700 PC
Voltage: 27–50 V
Current: 700 mA
OPTOTRONIC® Compact | OTe
OPTOTRONIC® ECO
New versions now available: Dimmable via trailing- or leading-edge phase control
5
Product features
—— Dimmable via trailing- or leading-edge phase control
(10–100 %, ­depending on dimmer)
—— Overtemperature, overload and short-circuit protection
—— Compact housing for installation in tight spaces
—— Lifetime of up to 50 000 hours 1) and high ambient
­tem­perature
—— Suitable for class I and class II luminaires
(OTe 35 only for class II)
—— Compatible with common trailing- or leading-edge
phase dimmers 2)
Year
OSRAM
Guarantee*
OPTOTRONIC® ECO driver (OTe 25/220-240/700 PC)
Housing (A)
Technical data
Product reference
Iout
Uout
Pout
Eff. max. Ta
Tc
Lifetime
Iout accur.
Isolation
Ripple at
OTe 10/220-240/700 PC
(mA)
700
(V)
7-14
(W)
5-10
(%)
≥ 79
(°C)
-20…55
(°C)
80/70
(h)
35 k 3)/50 k 1)
(%)
10
SELV
100 Hz (%)
35
OTe 13/220-240/350 PC
OTe 18/220-240/350 PC
OTe 18/220-240/500 PC
350
350
500
18-38
27-54
18-36
6.5-13.5
9.5-19
9-18
≥ 82
≥ 84
≥ 84
-20…55
-20…55
-20…55
85/75
75/65
75/65
35 k 3)/50 k 1)
35 k 3)/50 k 1)
35 k 3)/50 k 1)
10
10
10
SELV
SELV
SELV
25
< 30
< 30
OTe 25/220-240/700 PC
700
18-36
12.5-25
≥ 85
-20…50
75/65
35 k 3)/50 k 1)
10
SELV
< 30
OTe 35/220-240/700 PC
700
27-50
19-35
≥ 85
-20…45
80/70
35 k 3)/50 k 1)
5
SELV
< 25
Product reference
Product number
LxWxH (mm)
Cable clamp
OTe 10/220-240/700 PC
OTe 13/220-240/350 PC
4052899105300
OT CABLE CLAMP E-STYLE 4052899167896
20
4052899105324
95x53x25 (A/B)
95x53x25 (A/B)
OT CABLE CLAMP E-STYLE 4052899167896
20
OTe 18/220-240/350 PC
4052899105348
95x53x30 (A/B)
OT CABLE CLAMP E-STYLE 4052899167896
20
OTe 18/220-240/500 PC
4052899105362
95x53x30 (A/B)
OT CABLE CLAMP E-STYLE 4052899167896
20
OTe 25/220-240/700 PC
4052899105386
95x53x30 (A/B)
OT CABLE CLAMP E-STYLE 4052899167896
20
OTe 35/220-240/700 PC
4008321825520
153x54x36 (C)
Product number Packaging PrevaLED®
Cable clamp
(pcs)
match
20
OT cable clamp
Thanks to the additional cable clamp,
most of the OTe drivers can be used for
built-in as well as independent installation.
E-Style
* For details on our guarantee requirements, go to ­
www.osram.com/guarantee
1) Operation at max. Tc -10 K, maximum failure rate of 10 %
2) A
list of tested dimmers can be found at
www.osram.com/oem-download (see “Control gears OPTOTRONIC”)
3) At max. Tc temperature, maximum failure rate of 10 %
OPTOTRONIC® ECO driver
OPTOTRONIC® ECO driver
(OTe 25/220-240/700 PC)
(OTe 35/220-240/700 PC)
Housing (B)
Housing (C)
OPTOTRONIC® Compact | System solutions
System solutions with OSRAM
­ odules
­OPTOTRONIC® drivers and LED m
OSRAM always offers you the perfect match of light source and driver
PrevaLED® Coin
PrevaLED® Core
PrevaLED® Cube
PrevaLED® Bar Value
Optimum lighting does not only depend on the performance of the single components but
also on the clever combination of these components to create a unique system s­ olution.
By combining OPTOTRONIC® Compact drivers with PrevaLED® or other modules (CC) from
­OSRAM, you can rest assured that you have found the perfect match for your lighting ­solution.
OSRAM OPTOTRONIC® drivers in combination with OSRAM
LED modules offer you unique added value:
—— Perfect system match, tested by OSRAM
—— Just one provider for your lighting system
—— LEDset2 functionality with PrevaLED® Core and
­PrevaLED® Cube (see page 11)
For further details regarding driver and module ­compatibility,
please contact your local OSRAM sales r­ epresentative.
16
DRAGONpuck®
OPTOTRONIC® Compact | System solutions
Matchmaker
Combine and test LED modules and drivers
For general lighting applications, OSRAM offers a quick and convenient way to select the
­optimum system solution for a specific project and thus simplifies your daily work.
For OSRAM LED systems, the independent selection tool Matchmaker is available online and
can be downloaded for offline use with individual requirements.
Matchmaker is based on Microsoft Excel. With the convenient tool, a specific LED module
can be combined with a suitable driver. Furthermore, all corresponding parameters (e.g.
­system efficacy, operating current, luminous flux as well as temperature values) can also be
tested in advance and adjusted to match each other. All data in the tool are based on real
measurements and have been checked by the OSRAM Quality Department.
Matchmaker is regularly updated. The latest version can be found in the OSRAM Download
Center at www.osram.com/oem-download (“Control gears OPTOTRONIC” or “LED light
­engines Spot- and Downlights”).
17
OPTOTRONIC® Compact | System solutions
System solutions with OSRAM
­OPTOTRONIC® drivers and light
­management systems (LMS)
For higher levels of efficiency, flexibility and customization
Combining OSRAM OPTOTRONIC® LED drivers and light
management systems (LMS) allows you to create unique
lighting solutions that offer plenty of benefits to your c
­ ustomers.
Your flexibility during projects is increased tremendously as
the LMS provide a simple way to address OTi DALI LED
­drivers for easy dimming and setting of the d
­ esired lighting
level. And the best thing about it: You also save huge
amounts of energy. With LMS from OSRAM, you will always
find the ideal solution – for various applications, luminaires
and customer demands.
Touch DIM® LS LI and LS/PD LI sensor
OPTOTRONIC® and Touch DIM®
The Touch DIM® functionality, integrated in all
OTi DALI LED drivers, is as easy as it gets. Via
­standard pushbuttons, up to 20 OTi DALI LED
­drivers can be manually dimmed and switched in
a convenient way and a scene can be stored – all
without the need for a controller. Moreover, with
special Touch DIM® light and presence sensors,
which can be connected directly to the OTi DALI
LED drivers, energy savings of more than 50 %
can be achieved.
18
OPTOTRONIC® Compact | System solutions
DALIeco® Control unit and PC configuration software
OPTOTRONIC® and DALIeco® Control – configuration by mouse click
With the DALIeco® Control unit for up to 32 OTi DALI LED drivers, you can increase comfort
and energy efficiency of your lighting in no time at all. No matter if used for a single luminaire
or luminaire group, in individual or open-plan offices, corridors or production and storage
areas – with the multi-functional DALIeco® Control, individual function profiles can be set up by
a few mouse clicks and transmitted via remote control at the push of a button. ­Purely manual
control or a time sequence control can be r­ealized just as easy as the convenient automation by
­presence and light sensors.
DALI PRO CONT-4 RTC controller
DALI PRO Touch Panel
DALI LS/PD LI sensor
DALI HIGHBAY
­ADAPTER
OPTOTRONIC® and DALI PROFESSIONAL
The combination of OPTOTRONIC® LED drivers and DALI PROFESSIONAL is the perfect
choice for anyone looking for maximum flexibility in the control of a larger number of luminaires, groups or scenes. With just one controller, up to 256 OTi DALI LED drivers can be
controlled in 4 x 16 groups via 4 DALI lines. In addition, up to 50 sensors or pushbutton
couplers can be connected to the DALI line. Via DALI SWITCH SO switch actuators, nondimmable OT FIT LED drivers can also be integrated. DALI PROFESSIONAL offers a flexible
configuration: Changes can be made quickly and conveniently at all times via a free PC software – without the need for rewiring. Thanks to the wide choice of user interfaces and sensors as well as an integrated real-time clock, DALI PROFESSIONAL is suitable for industrial
buildings and warehouses and also for office spaces with single and open-plan offices.
19
400W050GB 01/16 Subject to change without notice. Errors and omissions excepted.
www.osram.com/optotronic
For more information, please go to:
—— OPTOTRONIC®: www.osram.com/optotronic
—— Light management systems: www.osram.com/lms
—— PrevaLED®: www.osram.com/prevaled
—— Tuner4TRONIC®: www.osram.com/t4t
—— LEDset: www.osram.com/ledset
—— News: www.osram.com/oem
OSRAM GmbH
Head office:
Marcel-Breuer-Strasse 6
80807 Munich, Germany
Phone +49 89 6213-0
Fax
+49 89 6213-2020
www.osram.com