США

Station and Intermediate Class
Surge Arresters
Product Overview
www.siemens.com/energy/arrester
Answers for energy.
High Voltage – Reliable Protection
Siemens surge arresters have successfully
­defied high winds, severe weather, harsh
­environments and even earthquakes for
­decades. Our surge arresters exhibit the
­properties and ­provide the benefits that
­ensure they will ­perform as intended –
­protecting equipment and systems from
­lightning and switching overvoltages.
With decades of experience in the design and manu­facturing of
high voltage power supply components, Siemens also specializes
in advanced Silicone Rubber (SR) insulated surge arresters providing the highest levels of mechanical strength, performance
and safety even in the most demanding environments, such as
in contaminated, industrially polluted, high seismic and vandal
prone critical installations.
The product family of our surge arresters offers the right solution
to any specific need. They have a proven fit for protecting transmission lines and transformers, as well as complete switchgear
from the hazards of high voltage start-up surges, line transients
and lightning. Siemens surge arresters have been succesfully
tested to the latest ANSI/IEEE Standard C62.11.
2
As pioneers in the field of Silicone Rubber
(SR) insulation and one of the few suppliers
with comprehensive inhouse research and
development capabilities in this industry,
we can also provide surge arresters customized to very special requirements. The
cost-effectiveness of our products is underscored by uncompromising quality ensuring the long service life and reliability of
each application.
Available off-the-shelf, the 3EL standard
series of our SR surge arresters have been
designed to meet the requirements of
a wide range of common installation
­environments. For more demanding applications, our high-end 3EQ series will maintain at least 75 % of its nominal mechanical
strength in the event of a pressure relief,
and can thus also be used as a “regular”
support (station post) insulator.
Siemens Promise System Reliability
Silicone Rubber (SR) Insulation for Safety
Siemens offers two different types of arresters with SR housing:
The 3EL series for standard applications, and the advanced
3EQ series for the highest performance needs. Both are
­designed u
­ sing the same glass collared MOV-blocks resulting
in outstanding electrical performance.
SR has been used as an outdoor insulation material for over
25 years, with excellent service experience even under severe
climatic and environmental conditions. Today, it is among the
most widely used materials for HV outdoor equipment.
Further key advantages of SR especially
compared to EPDM based alloy rubber
­include:
■■ High resistance to tracking erosion
■■ Excellent resistance to flashover
■■ Superior UV stability
■■ Self-extinguishing flame retardancy
■■ Adaptability to variable design and
ease of processing
For additional information call for our
publication on Silicone Rubber insulation.
Silicone is highly hydrophobic. While there are many polymeric
materials with similar initial hydrophobic properties, most of
them lose their hydrophobicity after a relatively short period such
as EPDM based alloy rubber. Only the true SR is capable of maintaining its hydrophobicity throughout its entire lifetime. This
­ensures the long service life of our 3EL and 3EQ arresters.
3
One Goal – 3 Designs
3EL Silicone Rubber (SR)
Surge Arresters with Cage Design™
3EQ Silicone Rubber (SR)
Surge Arresters with Tube Design
3EP Porcelain Surge Arresters
The standard 3EL series is
based on a cage of p
­ restressed
fiber glass ­reinforced rods
for high ­mechanical strength.
The SR insulation is molded
­directly onto the MOV-Blocks.
The design provides an
­optimum price/performance
­ratio for applications up to
345 kV system voltage. The
3EL1 series as lower voltage
station class surge arrester
is an ­enhancement of our
3EL product line.
The fiber reinforced plastic
(FRP) tube material has been
chosen to provide the highest
possible mechanical strength.
Due to its excellent pro­cessi­
bility, the SR insulation is
molded directly onto the
FRP tube.
The 3EQ tube design is
considered the best choice
for applications up to
1200 kV system voltage,
particularly in locations
or installations with demanding environmental or
extremely high mechanical/
seismic requirements.
The high-quality porcelain
housing of the 3EP as well
as the special grade sulfur
­cement bonding of housing
and flanges en­sure
­outstanding mechanical
strength, for applications
up to 800 kV.
3EL
Total encapsulation of all components
to avoid partial discharges and moisture
­ingress
■■ High mechanical performance for
­standard applications
■■ Silicone Rubber shielding provides
low-pressure release of the arc in
the event of a short circuit
■■ Significant weight savings vs.
­comparable porcelain arresters,
­facilitating transport and installation
of the arresters
■■ Suitable for use as substation and/or
line surge arresters
■■
4
3EQ
FRP tube design for outstanding
­mechanical stability (much stronger
than porcelain), combined with an
­excellent sealing system for long-life
protection against ingress of moisture
and partial discharges
■■ Highest level of safety in the event
of short circuits, no ejection of any
­internal components
■■ Retention of at least 75 % of initial
­mechanical strength even after short
circuit, permits the use of the arrester
as a support insulator
■■ Weight savings vs. comparable
porcelain arresters
■■ Ideal for applications in areas exposed
to high seismic activity, heavy wind loads
and any other ­demanding mechanical
requirements
■■ Available as single-unit arrester rated
up to 300 kV or two-unit arresters for
up to 550 kV, minimizing the required
number of units
■■ High reliability over a wide range of
temperatures and extreme temperature
changes from – 67 F to + 122 F
(– 55 °C to + 50 °C)
■■
3EP
Reliable technology with a proven
­history
■■ Optimized glass collared MOV-block
design
■■ Pressure relief system for very fast
venting, providing the highest possible
means of safety in areas requiring
­special protection
■■ Very high cantilever strength
■■ Highly reliable sealing system and state
of the art seal test set-up make Siemens
arresters completely reliable
■■
Product Range
We offer multiple models for each family of arresters.
They differ mainly in diameter and length of the
housings and size of the M
­ OV-blocks to fulfill different
customer ­requirements.
3EL5
3EL1
3EL2
3EQ1
3EQ4
3EQ3
3EP5
Silicone Rubber
3EP4
3EP2
3EP3
Porcelain
Reliable power transmission …
... even in extreme climates ...
... and high seismic impact locations
Application: Fixed series capacitor
­protected by arrester banks, consisting of
multi-column 3EP3 arresters connected
in parallel
Key benefits: Improved power trans­
mission quality.
Application: Three advanced series
3-phase static compensators protected
by arrester banks, consisting of multi-­
column arresters connected in parallel
Key benefits: Enhanced power trans­
mission quality at high reliability under
extreme climatic conditions. All of these
­arresters are capable of with­standing
temperature extremes of – 67 F to + 122 F
(– 55 °C to + 50 °C).
Application: Innovative installation of
3EQ3 surge arresters for protection of
hanging thyristor valves in a 500 kV
HVDC long-distance power transmission
system
Key benefits: Superior resistance to seismic shock for optimum reliability of HVDC
transmission. These arresters are capable
of with­standing seismic forces up to 1 g.
Customer: ENTERGY Services Inc.
Project name: Jacinto
Location: Near Cleveland, Texas
Customer: Hydro-Québec
Project name: Montagnais FSC
Location: Montagnais, Quebec, Canada
Customer: Los Angeles Department
of Water and Power
Project name: Sylmar East,
Valve Reconstruction
Location: Sylmar, California
5
Rating and Specifications
Intermediate Class – Silicone Rubber Housed Arrester, Type 3EL5
Electrical Characteristics
Duty cycle
voltage
MCOV
TOV
Capability
w/o Duty
Protective Level
Maximum discharge voltage
FOW
for 8/20 µs
[kV]
for 0.1 s
[kV]
3
2.55
3.6
8.1
6.8
7.1
7.4
8.0
9.1
10.6
6.0
6.1
3EL5 003-0PB11-4YH5
6
5.1
7.1
16.2
13.5
14.2
14.8
15.9
18.3
21.1
11.9
12.2
3EL5 006-0PB11-4YH5
[kV cr]
1.5 kA
[kV cr]
3 kA
[kV cr]
5 kA
[kV cr]
10 kA
[kV cr]
for 45/90 µs
[kV]
20 kA
[kV cr]
40 kA
[kV cr]
250 A
[kV cr]
500 A
[kV cr]
9
7.7
10.7
24.3
20.3
21.2
22.2
23.9
27.4
31.7
17.9
18.4
3EL5 009-0PB11-4YH5
10
8.4
11.7
27.0
22.5
23.6
24.6
26.5
30.5
35.2
19.9
20.4
3EL5 010-0PB11-4YH5
12
10.2
14.2
32.4
27.0
28.3
29.6
31.8
36.6
42.3
23.9
24.5
3EL5 012-0PC11-4YH5
15
12.7
17.7
40.5
33.8
35.4
37.0
39.8
45.7
52.9
29.8
30.6
3EL5 015-0PC11-4YH5
18
15.3
21.3
48.7
40.5
42.5
44.4
47.7
54.9
63.4
35.8
36.7
3EL5 018-0PD11-4YH5
21
17.0
23.7
56.8
47.3
49.5
51.8
55.7
64.0
74.0
41.7
42.9
3EL5 021-0PD11-4YH5
24
19.5
27.2
64.9
54.1
56.6
59.1
63.6
73.1
84.6
47.7
49.0
3EL5 024-0PE11-4YH5
27
22.0
30.7
73.0
60.8
63.7
66.5
71.6
82.3
95
53.7
55.1
3EL5 027-0PE11-4YH5
30
24.4
34.0
81.1
67.6
70.8
73.9
79.5
91.4
106
59.6
61.2
3EL5 030-0PF11-4YH5
36
29.0
40.5
97.3
81.1
84.9
88.7
95.4
110
127
71.6
73.5
3EL5 036-0PH11-4YH5
39
31.5
43.9
105
87.8
92.0
96.1
103
119
137
77.5
79.6
3EL5 039-0PH11-4YH5
45
36.5
50.9
122
101
106
111
119
137
159
89.4
91.8
3EL5 045-0PH11-4YH5
48
39.0
54.4
130
108
113
118
127
146
169
95.4
97.9
3EL5 048-0PH11-4YH5
54
42
58.6
146
122
127
133
143
165
190
107
110
3EL5 054-0PJ11-4YH5
60
48
67.0
162
135
142
148
159
183
211
119
122
3EL5 060-0PK11-4YH5
72
57
79.5
195
162
170
177
191
219
254
143
147
3EL5 072-0PH12-4YH5
90
70
97.7
243
203
212
222
239
274
317
179
184
3EL5 090-0PH12-4YH5
96
76
106
259
216
226
237
254
293
338
191
196
3EL5 096-0PH12-4YH5
108
84
117
292
243
255
266
286
329
381
215
220
3EL5 108-0L J12-4ZH9
111
88
123
300
250
262
274
294
338
391
221
226
3EL5 111-0LK12-4ZH9
120
98
137
324
270
283
296
318
366
423
239
245
3EL5 120-0LK12-4ZH9
Table 1: Intermediate Class – Silicone Rubber Housed Arrester, Type 3EL5
(The table shows only standard arresters, other special types are available on request.)
6
Arrester part number
Mechanical Characteristics
Short
circuit
current
0.2 s
Creepage
distance
Height
“H”
(see fig. 1)
Grading
ring
diameter
Cantilever
strength*
Weight
[kJ/kV
mcov]
[inch]
[inch]
[inch]
[inch–lbf]
[lbs]
20
2.0
15
7
–
3098
6
20
2.0
15
7
–
3098
6
20
2.0
15
7
–
3098
7
20
2.0
15
7
–
3098
7
20
2.0
19
8
–
3098
7
20
2.0
19
8
–
3098
7
20
2.0
24
9
–
3098
8
20
2.0
24
9
–
3098
8
20
2.0
31
11
–
3098
9
20
2.0
31
11
–
3098
9
20
2.0
35
12
–
3098
10
20
2.0
48
16
–
3098
12
20
2.0
48
16
–
3098
12
20
2.0
48
16
–
3098
13
20
2.0
48
16
–
3098
13
20
2.0
56
19
–
3098
14
20
2.0
63
20
–
3098
15
20
2.0
97
31
–
3098
20
20
2.0
97
31
–
3098
22
20
2.0
97
31
–
3098
23
20
2.0
112
37
–
3098
19
20
2.0
126
40
–
3098
20
20
2.0
126
40
–
3098
21
[kA]
Energy
[thermal]
Fig. 1: Height of a surge arrester
(applies to all surge arresters of this catalog)
* MDCL-static (Maximum design cantilever load-static) = Designed to continuously carry working load, and this applies to polymer housed arresters
UMS-static (Ultimate mechanical strength-static) = Ultimate Cantilever Strength (Design Load), and this applies to porcelain housed arresters
7
Rating and Specifications
Station Class – Silicone Rubber Housed Surge Arrester, Type 3EL1 and 3EL2
Electrical Characteristics
Duty cycle
voltage
MCOV
TOV
Capability
w/o Duty
Protective Level
Maximum discharge voltage
FOW
for 8/20 µs
[kV]
[kV]
3
2.55
4.0
8.6
6.6
6.9
7.3
7.8
8.7
10.0
5.9
6.0
3EL1 003-1PC21-4YH5
6
5.10
8.0
17.2
13.3
13.9
14.5
15.6
17.5
20.0
11.7
12.0
3EL1 006-1PC21-4YH5
[kV cr]
1.5 kA
[kV cr]
3 kA
[kV cr]
5 kA
[kV cr]
10 kA
[kV cr]
for 45/90 µs
for 0.1 s
[kV]
20 kA
[kV cr]
40 kA
[kV cr]
250 A
[kV cr]
500 A
[kV cr]
9
7.65
11.9
25.7
19.9
20.8
21.8
23.4
26.2
30.0
17.6
18.0
3EL1 009-1PC21-4YH5
10
8.40
13.1
28.6
22.1
23.1
24.2
26.0
29.1
33.3
19.5
20.0
3EL1 010-1PC21-4YH5
12
10.2
15.9
34.3
26.5
27.8
29.0
31.2
34.9
39.9
23.4
24.0
3EL1 012-1PC21-4YH5
15
12.7
19.8
42.9
33.2
34.7
36.3
39.0
43.7
49.9
29.3
30.0
3EL1 015-1PC21-4YH5
18
15.3
23.9
51.5
39.8
41.7
43.5
46.8
52.4
59.9
35.1
36.0
3EL1 018-1PC21-4YH5
21
17.0
26.5
60.1
46.4
48.6
50.8
54.6
61.2
69.9
41.0
42.0
3EL1 021-1PC21-4YH5
24
19.5
30.4
68.6
53.0
55.5
58.0
62.4
69.9
79.9
46.8
48.0
3EL1 024-1PC21-4YH5
27
22.0
34.3
77.2
59.7
62.5
65.3
70.2
78.6
89.9
52.7
54.1
3EL1 027-1PC21-4YH5
30
24.4
38.1
85.8
66.3
69.4
72.5
78.0
87.4
99.8
58.5
60.1
3EL1 030-1PE21-4YH5
36
29.0
45.2
103
79.6
83.3
87.0
93.6
105
120
70.2
72.1
3EL1 036-1PE21-4YH5
39
31.5
49.1
112
86.2
90.2
94.3
101
114
130
76
78
3EL1 039-1PE21-4YH5
45
36.5
56.9
129
99.5
104
109
117
131
150
87.8
90.1
3EL1 045-1PH21-4YH5
48
39.0
60.8
137
106
111
116
125
140
160
93.6
96.1
3EL1 048-1PH21-4YH5
54
42.0
65.5
154
119
125
131
140
157
180
105
108
3EL1 054-1PH21-4YH5
60
48.0
74.9
157
124
130
135
144
160
181
112
115
3EL2 060-2PF31-4XH5
72
57.0
88.9
188
149
156
162
173
192
218
135
138
3EL2 072-2PF31-4XH5
90
70.0
109
235
186
194
203
216
240
272
168
173
3EL2 090-2PJ31-4XH5
96
76.0
119
251
198
207
217
230
256
290
180
184
3EL2 096-2PJ31-4XH5
108
84.0
131
283
223
233
244
259
288
327
202
207
3EL2 108-2PJ31-4XH5
111
88.0
137
290
229
240
250
266
296
336
208
213
3EL2 111-2PJ31-4XH5
120
98.0
153
314
248
259
271
288
320
363
225
230
3EL2 120-2PJ31-4XH5
132
106
165
345
272
285
298
317
352
399
247
253
3EL2 132-2PM31-4XH5
144
115
179
377
297
311
325
346
384
435
270
276
3EL2 144-2PM31-4XH5
168
131
204
439
347
363
379
403
448
508
314
323
3EL2 168-2PQ32-4XH5
172
140
218
450
355
372
388
413
458
520
322
330
3EL2 172-2PQ32-4XH5
180
144
225
471
372
389
406
432
480
544
337
346
3EL2 180-2PQ32-4XH5
192
152
237
502
396
415
433
461
511
581
359
369
3EL2 192-2PQ32-4XH5
228
180
281
596
471
492
514
547
607
689
427
438
3EL2 228-2PJ32-4XH5
240
190
296
628
495
518
541
576
639
726
449
461
3EL2 240-2PJ32-4XH5
258
209
326
682
516
534
558
593
653
712
469
481
3EL2 258-2PM32-4XH5
264
212
331
698
528
546
571
607
668
729
480
492
3EL2 264-6PW42-4XH5
276
220
343
730
552
571
597
635
698
762
501
514
3EL2 276-6PM42-4XH5
288
230
359
762
576
596
623
662
729
795
523
537
3EL2 288-6PM42-4XH5
294
235
367
778
588
609
636
676
744
811
534
548
3EL2 294-6PX43-4XH5
Table 2: Station Class – Silicone Rubber Housed Surge Arrester, Type 3EL1 and 3EL2
(The table shows only standard arresters, other special types are available on request.)
8
Arrester part number
Mechanical Characteristics
Short
circuit
current
0.2 s
Creepage
distance
Height
“H”
(see fig. 1)
Grading
ring
diameter
Cantilever
strength*
Weight
[kJ/kV
mcov]
[inch]
[inch]
[inch]
[inch-lbf]
[lbs]
65
6.3
35
18
–
7435
13
65
6.3
35
18
–
7435
13
65
6.3
35
18
–
7435
13
65
6.3
35
18
–
7435
14
65
6.3
35
18
–
7435
14
65
6.3
35
18
–
7435
14
65
6.3
35
18
–
7435
15
65
6.3
35
18
–
7435
15
65
6.3
35
18
–
7435
16
65
6.3
35
18
–
7435
16
65
6.3
55
24
–
7435
19
65
6.3
55
24
–
7435
20
65
6.3
55
24
–
7435
21
65
6.3
81
31
–
7435
24
65
6.3
81
31
–
7435
24
65
6.3
81
31
–
7435
25
65
10.0
92
28
–
24782
51
65
10.0
92
28
–
24782
53
65
10.0
150
42
–
24782
66
65
10.0
150
42
–
24782
67
65
10.0
150
42
–
24782
70
65
10.0
150
42
–
24782
71
65
10.0
150
42
–
24782
73
65
10.0
177
49
–
24782
80
65
10.0
177
49
–
24782
83
65
10.0
243
70
–
24782
112
65
10.0
243
70
–
24782
112
65
10.0
243
70
–
24782
115
65
10.0
243
70
–
24782
117
65
10.0
301
84
31
24782
135
65
10.0
301
84
31
24782
137
65
12.5
354
98
31
24782
149
65
12.5
327
91
31
24782
140
65
12.5
354
98
31
24782
146
65
12.5
354
98
31
24782
149
65
12.5
393
111
47
24782
168
[kA]
Energy
[thermal]
*MDCL-static (Maximum design cantilever load-static) = Designed to continuously
carry working load, and this applies to polymer housed arresters
UMS-static (Ultimate mechanical strength-static) = Ultimate Cantilever Strength
(Design Load), and this applies to porcelain housed arresters
9
Rating and Specifications
Station Class – Silicone Rubber Arrester, Type 3EQ
and Porcelain Arrester, Type 3EP
If the offered values of our standard arresters type 3EQ
and 3EP do not meet your requirements customized arresters
can be provided on special request.
Porcelain type 3EP3
(500 kV)
Silicone Rubber type 3EQ4 (500 kV)
Electrical Characteristics for 3EQ and 3EP
Duty cycle
voltage
MCOV
TOV
Capability
w/o Duty
Protective Level
Maximum discharge voltage
FOW
Arrester part number
for 8/20 µs
for 45/90 µs
[kV]
[kV]
for 0.1 s
[kV]
[kV cr]
1.5 kA
[kV cr]
3 kA
[kV cr]
5 kA
[kV cr]
10 kA
[kV cr]
15 kA
[kV cr]
20 kA
[kV cr]
40 kA
[kV cr]
500 A
[kV cr]
1 kA
[kV cr]
2 kA
[kV cr]
30
24.4
38.1
85.8
66.3
69.4
72.5
78.0
83.5
87.4
99.8
60.1
62.4
65.5
3EQ1 030-1PB21-4XH5
36
29.0
45.2
103
79.6
83.3
87.0
93.6
100
105
120
72.1
74.9
78.6
3EQ1 036-1PB21-4XH5
39
31.5
49.1
112
86.2
90.2
94.3
101
108
114
130
78.1
81.1
85.2
3EQ1 039-1PB21-4XH5
45
36.5
56.9
118
92.9
97.2
102
108
114
120
136
86.4
88.6
92.9
3EQ1 045-2PB31-4XH5
48
39.0
60.8
126
99.1
104
108
115
122
128
145
92.2
94.5
99.1
3EQ1 048-2PB31-4XH5
54
42.0
65.5
141
111
117
122
130
137
144
163
104
106
111
3EQ1 054-2PB31-4XH5
60
48.0
74.9
157
124
130
135
144
153
160
181
115
118
124
3EQ1 060-2PB31-4XH5
72
57.0
88.9
188
149
156
162
173
183
192
218
138
142
149
3EQ1 072-2PB31-4XH5
90
70.0
109
235
186
194
203
216
229
240
272
173
177
186
3EQ1 090-2PB31-4XH5
96
76.0
119
251
198
207
217
230
244
256
290
184
189
198
3EQ1 096-2PB31-4XH5
108
84.0
131
283
223
233
244
259
275
288
327
207
213
223
3EQ1 108-2PE31-4XH5
111
88.0
137
290
229
240
250
266
282
296
336
213
218
229
3EQ1 111-2PE31-4XH5
120
98.0
153
314
248
259
271
288
305
320
363
230
236
248
3EQ1 120-2PE31-4XH5
132
106
165
345
272
285
298
317
336
352
399
253
260
272
3EQ1 132-2PJ31-4XH5
144
115
179
377
297
311
325
346
366
384
435
276
283
297
3EQ1 144-2PJ31-4XH5
168
131
204
439
347
363
379
403
427
448
508
323
331
347
3EQ1 168-2PP31-4XH5
172
140
218
450
355
372
388
413
438
458
520
330
338
355
3EQ1 172-2PP31-4XH5
180
144
225
471
372
389
406
432
458
480
544
346
354
372
3EQ1 180-2PP31-4XH5
192
152
237
502
396
415
433
461
488
511
581
369
378
396
3EQ1 192-2PS31-4XH5
228
180
281
596
471
492
514
547
580
607
689
438
449
471
3EQ1 228-2PJ32-4XH5
240
190
296
628
495
518
541
576
611
639
726
461
472
495
3EQ1 240-2PJ32-4XH5
258
209
326
675
533
557
582
619
656
687
780
495
508
533
3EQ4 258-2PV31-4XH5
264
212
331
691
545
570
596
634
672
703
798
507
520
545
3EQ4 264-2PV31-4XH5
276
220
343
722
570
596
623
662
702
735
835
530
543
570
3EQ4 276-2PV31-4XH5
288
230
359
753
594
622
650
691
733
767
871
553
567
594
3EQ4 288-2PN32-4XH5
294
235
367
769
607
635
663
706
748
783
889
564
579
607
3EQ4 294-2PN32-4XH5
312
245
382
816
644
674
704
749
794
831
943
599
614
644
3EQ4 312-2PN32-4XH5
396
318
496
1070
810
838
875
931
977
1024
1117
754
772
810
3EQ4 396-3PV42-4XH5
420
335
523
1135
859
888
928
987
1036
1086
1184
799
819
859
3EQ4 420-3PV42-4XH5
444
353
551
1200
908
939
981
1043
1096
1148
1252
845
866
908
3EQ4 444-3PV42-4XH5
468
372
580
1265
957
990
1034
1100
1155
1210
1320
891
913
957
–
468
372
580
1281
947
990
1023
1076
1130
1173
1281
883
915
947
3EQ4 468-4PV52-4XH5
540
428
668
1421
1072
1108
1144
1204
1252
1301
1421
1012
1036
1072
3EQ3 540-5PN53-4XH6
564
448
699
1484
1119
1157
1195
1258
1308
1358
1484
1056
1082
1119
3EQ3 564-5PP53-4XH6
576
462
721
1516
1143
1182
1220
1284
1336
1387
1516
1079
1105
1143
3EQ3 576-5PQ53-4XH6
588
470
733
1547
1167
1206
1246
1311
1364
1416
1547
1101
1128
1167
3EQ3 588-5PQ53-4XH6
612
485
757
1610
1215
1256
1297
1365
1419
1474
1610
1146
1174
1215
3EQ3 612-5PR53-4XH6
Table 3: Station Class – Silicone Rubber Arrester, Type 3EQ and Porcelain Arrester, Type 3EP
(The table shows only standard arresters, other special types are available on request.)
10
Electrical Character
p.u. MCOV
1.8
1.7
Preheating to 140 °F/60 °C
no prior duty
Preheating to 140 °F/60 °C
prior duty
1.6
1.5
1.4
1.3
1.2
1.1
t/s
1
0.01
0.1
1
10
100
1000
10000
TOV characteristics – valid for all station class surge arresters in this catalog
ristics for 3EQ
Mechanical Characteristics for 3EQ (Silicone)
Short
Energy
Grading
Height
Cantilever
circuit
Creepage
ring
“H”
strength
current
distance
[thermal]
(see fig. 1) diameter
0.2 s
Weight
Electrical Characteristics for 3EP
Arrester part number
[kJ/kV
mcov]
[inch]
[inch]
[inch]
[inch-lbf]
[lbs]
50
6.3
82
35
–
37173
55
3EP5 030-1PC21-3XH5
50
6.3
82
35
–
37173
56
50
6.3
82
35
–
37173
50
10
82
35
–
50
10
82
35
50
10
82
35
50
10
82
50
10
50
10
50
40
Mechanical Characteristics for 3EP (Porcelain)
Short
Energy
Grading
Height
Cantilever
circuit
Creepage
ring
“H”
strength*
current
distance
[thermal]
(see fig. 1) diameter
0.2 s
Weight
[kJ/kVmcov]
[inch]
[inch]
[inch]
[inch-lbf]
[lbs]
40
6.3
26
14
–
21242
39
3EP5 036-1PE21-3XH5
40
6.3
50
22
–
21242
54
57
3EP5 039-1PE21-3XH5
40
6.3
50
22
–
21242
54
37173
60
3EP5 045-2PE31-3XH5
40
10
50
22
–
21242
58
–
37173
61
3EP5 048-2PE31-3XH5
40
10
50
22
–
21242
59
–
37173
62
3EP5 054-2PE31-3XH5
40
10
50
22
–
21242
60
35
–
37173
64
3EP5 060-2PE31-3XH5
40
10
50
22
–
21242
62
82
35
–
37173
66
3EP5 072-2PH31-3XH5
40
10
74
30
–
21242
78
82
35
–
37173
70
3EP4 090-2PD31-3XH5
65
10
98
41
–
47794
112
10
82
35
–
37173
71
3EP4 096-2PD31-3XH5
65
10
98
41
–
47794
113
10
104
41
–
37173
78
3EP4 108-2PD31-3XH5
65
10
98
41
–
47794
115
40
10
104
41
–
37173
79
3EP4 111-2PD31-3XH5
65
10
98
41
–
47794
116
40
10
104
41
–
37173
81
3EP4 120-2PD31-3XH5
65
10
98
41
–
47794
119
40
10
133
49
–
37173
88
3EP4 132-2PE31-3XH5
65
10
134
52
–
47794
148
40
10
133
49
–
37173
91
3EP4 144-2PE31-3XH5
65
10
134
52
–
47794
150
40
10
170
58
–
37173
103
3EP4 168-2PF31-3XH5
65
10
151
57
–
47794
167
40
10
170
58
–
37173
103
3EP4 172-2PF31-3XH5
65
10
151
57
–
47794
167
40
10
170
58
–
37173
106
3EP4 180-2PF31-3XH5
65
10
151
57
–
47794
170
40
10
193
64
–
37173
113
3EP4 192-2PD32-3XH5
65
10
196
83
31
47794
234
40
10
267
97
31
37173
163
3EP4 228-2PE32-3XH5
65
10
268
104
31
47794
295
40
10
267
97
31
37173
165
3EP4 240-2PF32-3XH5
65
10
302
115
39
47794
324
65
10
304
97
31
130106
297
3EP4 258-2PF32-3XH5
65
10
302
115
39
47794
328
65
10
304
97
31
130106
298
3EP4 264-2PF32-3XH5
65
10
302
115
39
47794
329
65
10
304
97
31
130106
301
3EP2 276-2PG32-4XH5
65
10
284
128
39
132761
626
65
10
400
139
47
130106
409
3EP2 288-2PH32-4XH5
65
10
323
142
47
132761
684
65
10
400
139
47
130106
419
3EP2 294-2PH32-4XH5
65
10
323
142
47
132761
685
65
10
400
139
47
130106
423
3EP2 312-2PH32-4XH5
65
10
323
142
47
132761
689
65
12.5
607
194
71
130106
515
3EP2 396-3PF43-4XH5
80
12.5
377
173
71
132761
861
65
12.5
607
194
71
130106
522
3EP2 420-3PG43-4XH5
65
12.5
426
191
71
132761
942
65
12.5
607
194
71
130106
530
3EP2 444-3PG43-4XH5
65
12.5
426
191
71
132761
951
–
–
–
–
–
–
–
3EP2 468-3PH43-4XH5
65
12.5
485
213
71
132761
1043
65
16.3
607
194
71
130106
625
–
–
–
–
–
–
–
–
80
20
667
224
71
260212
1173
3EP3 540-5PK54-4XH5
78
20
868.5
294.5
104.3
361110
2644
80
20
711
236
87
260212
1214
3EP3 564-5PK54-4XH5
78
20
868.5
294.5
104.3
361110
2665
80
20
756
248
87
260212
1282
3EP3 576-5PK54-4XH5
78
20
868.5
294.5
104.3
361110
2674
80
20
756
248
87
260212
1331
3EP3 588-5PK54-4XH5
78
20
868.5
294.5
104.3
361110
2687
80
20
800
260
87
260212
1331
3EP3 612-5PK54-4XH5
78
20
868.5
294.5
104.3
361110
2704
[kA]
[kA]
* MDCL-static (Maximum design cantilever load-static) = Designed to continuously carry working load, and this applies to polymer housed arresters
UMS-static (Ultimate mechanical strength-static) = Ultimate Cantilever Strength (Design Load), and this applies to porcelain housed arresters
11
Accessories
NEMA terminal 3EL2 and
3EQ1/3/4 and 3EP1/3/4/5
thickness 0.4"
4.1"
3.15"
1.75"
"
55
55
0.
"
0.
1.75"
0.39"
1.75"
1.75"
4"
1.75"
3"
1.75"
3"
3.15"
4.5"
thickness 0.2"
Standard cable clamp
M12
NEMA terminal 3EL1/3EL5
2.56"
All types are equipped with NEMA 4-hole HV-terminal and cable clamp
≤ 0.6"
4YH5
grounded
75"
–
10.0
"
0.5
5"
Ø 8.
75"
–
BC
0
12
°
4YH1
insulated
10.0
"B
0.5
5"
C
0
12
Ø 0.24" … Ø 0.89"
Grounding eye-bolt terminal for all arresters
12
4YH5
grounded
≤ 0.6"
4YH1
insulated
≤ 0.6"
Ø 8.
Mounting base 3EL2
≤ 0.6"
Mounting base 3EL1/5
min 0
.59"
max 1
.34"
°
Adapter Plates for Varying Mounting Requirements
3EQ1
3EQ4
C
4YH5
grounded
≤ 0.6"
M12
n
so
olt
b
3
C
"B
10
≤ 0.8"
"B
≤ 0.6"
10
3YH5
grounded
3YH1
insulated
"B
C
≤ 0.6"
10
≤ 0.6"
4YH7
insulated
3EP4
≤ 0.6"
BC
≤ 0.6"
4YH5
grounded
n
so
olt
b
3
C
"B
10
.9"
4YH7
insulated
3EP5
"
10
Ø0
.9"
≤ 0.8"
Ø0
3YH5
grounded
3YH7
insulated
3EP2
Ø0
≤ 0.6"
≤ 0.6"
C
"B
10
n
so
olt
3b
.9"
4YH5
grounded
4YH7
insulated
All dimensions in inches
13
Monitoring devices for surge arresters
These monitoring devices can be connected to all surge arresters shown in this catalog
ACM basic
ACM advanced
Arrester Condition Monitor (ACM) basic
Order number: 3EX5 080-0
Arrester Condition Monitor (ACM) advanced
Order number: 3EX5 080-1
Order number: 3EX5 085 (USB wireless module)
Arrester Condition Indicator (ACI)
The arrester condition indicator shows the
arrester status at a glance. Its easy-to-understand
“traffic light” visualization is based on a 3rdharmonic-evaluation of the leakage current.
Order number: 3EX5 070
Surge counter
Surge counter with
leakage current meter
Surge counter
Order number: 3EX5 030
Surge counter with leakage current meter
Order number: 3EX5 050
Sensor
Order number: 3EX5 060
Sensor
Display
Display
Order number: 3EX5 062
Connecting lead*
Order number: 3EX5 963-xx
Up to 600 ft
Connecting leads available in fixed lengths from
3 to 30 meters. You can also order a connector and
a socket and configure a connecting lead on your
own up to 600 feet.
Connector and socket
Order number: 3EX5 960-0
Control spark gap
To estimate the current that flows through the
surge arrester in case of an overvoltage and to
count the surges.
Order number: 3EX6 040
14
*Required for operation
Available in different lengths
Part number (example)
3
E
L
Silicone rubber-housed surge arrester cage design
3
E
L
Silicone rubber-housed surge arrester tube design
3
E
Q
Porcelain-housed surge arrester
3
E
P
Surge arrester type
Rated voltage in kV
–
2
132
– 2
P M 3 1 – 4 X H 5
2
132
–
Long-duration current max. values
550 A
0
750 A
1
1100 A
2
1600 A
3
1600 A
4
2100 A
5
1200 A
6
Application
Phase surge arrester
P
Neutral point surge arrester
S
Transmission line surge arrester
L
Housing size of single unit
M
Line discharge class
LD 2
2
LD 3
3
LD 4
4
LD 5
5
Number of units
1 unit
1
2 units
2
3 units
3
4 units
4
–
–
Form of sheds
Standard sheds
3
Alternating sheds
4
High-voltage terminal
NEMA 4 hole pad, hot-dip galvanized
X
NEMA 4 hole pad, stainless steel
Y
Name plate
English IEEE/ANSI
H
Mounting
3EL, 3 hole insulated, Ø 8.75”–10.85”
1
3EL/3EP/3EQ, 3 hole not insulated, Ø 8.75”–10.85”
5
3EP3, 3 hole not insulated Ø 16.5”
6
3EP/3EQ, 3 hole insulated Ø 8.75”–10.85”
7
The top row shows an example of the build-up on our complete part numbers.
15
Published by and copyright © 2011:
Siemens AG
Energy Sector
Freyeslebenstrasse 1
91058 Erlangen, Germany
US Location
Siemens Energy, Inc.
Power Transmission Division
444 Highway 49 South
Richland, MS 39218
www.siemens.com/energy/arrester
Please contact us at:
Toll-free: +1 (877) 742-3309
Phone: +1 (601) 932-9800
Power Transmission Division
Order No. E50001-F630-A128-V1-4AUS | Printed in Germany
Dispo 30002 |
TH 263-100757 | SCH | 471920 | WS | 10111.0
Printed on elementary chlorine-free bleached paper.
All rights reserved.
Trademarks mentioned in this document
are the property of Siemens AG, its affiliates,
or their respective owners.
Subject to change without prior notice.
The information in this document contains general
descriptions of the technical options available, which
may not apply in all cases. The required technical
options should therefore be specified in the contract.