IM-6-RFCS-40 Vishay Dale Inductors, Commercial, Molded, Axial Leaded FEATURES • • • • ELECTRICAL SPECIFICATIONS Inductance Tolerance: ± 10 % on Q-meter for 0.10 μH to 22 μH, ± 5 % 1000 cps bridge for 27 μH to 100 μH, ± 5 % on Q-meter for 120 μH to 1000 μH Classification is grade 1, class B Inductance range is 0.10 μH to 1000 μH Proven reliability molded inductors Compliant to RoHS directive 2002/95/EC MECHANICAL SPECIFICATIONS Note • L and Q are not always tested at the same frequency, inductance values that are tested on Q-meter, are tested at standard test frequencies Terminal Strength: Meets 5 lb pull per MIL-PRF-15305 (latest revision) Dielectric Strength: 700 VRMS at sea level ENVIRONMENTAL SPECIFICATIONS Operating Temperature: - 55 °C to + 125 °C Self-Resonant Frequency: Minimum SRF measured with full length leads on grid-dip meter Q: Measured on Q-meter Moisture and Shock Resistance: Meets requirements of MIL-PRF-15305, grade 1, class B Vibration: High frequency, 10 Hz to 2000 Hz at 20 g ± 10 % maximum for 12 logarythmic swings, each of 20 min duration repeated for each of three mutually perpendicular planes DENSITY SPECIFICATIONS Weight: 0.9 g maximum DIMENSIONS in inches [millimeters] 1.30 [33.02] Typ. Min. # 22 0.025 ± 0.002 0.440 ± 0.010 [0.635 ± 0.051] [11.35 ± 0.254] TCW 0.190 ± 0.010 [4.83 ± 0.254] STANDARD ELECTRICAL SPECIFICATIONS IND. (μH) TOL. (%) Q MIN. TEST FREQUENCY (MHz) SRF MIN. (MHz) DCR MAX. (Ω) IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 75 75 75 75 75 70 70 65 60 55 55 50 50 45 45 45 45 50 50 50 50 50 45 40 40 25 25 25 25 20 20 15 15 15 400 400 400 400 400 376 352 320 288 264 240 220 200 176 160 144 132 0.02 0.025 0.03 0.03 0.03 0.04 0.05 0.08 0.08 0.10 0.12 0.18 0.24 0.35 0.43 0.65 0.80 RATED DC CURRENT (mA) 4000 3500 3000 3000 3000 2700 2500 2000 2000 1700 1500 1300 1100 1000 850 720 610 PHENOLIC CORE MODEL (1) Note (1) Model electricals and tolerances shown www.vishay.com 18 For technical questions, contact: [email protected] Document Number: 34034 Revision: 15-Jul-09 IM-6-RFCS-40 Inductors, Commercial, Molded, Axial Leaded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS Q MIN. 55 55 60 70 65 65 60 60 65 80 75 75 75 85 80 80 75 75 75 75 65 65 65 65 65 65 65 65 65 65 65 65 65 60 60 60 60 60 60 TEST FREQUENCY (MHz) 10 10 10 7.9 7.9 7.9 7.9 5.0 5.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 SRF MIN. (MHz) 88 80 76 72 64 56 52 48 42 38 34 32 29 26 21 18 15 13 10 8.0 5.7 5.4 5.0 4.7 4.5 4.2 4.0 3.8 3.6 3.4 3.2 3.0 2.9 2.8 2.7 2.6 2.5 2.4 2.2 DCR MAX. (Ω) 0.12 0.15 0.23 0.30 0.45 0.55 0.65 0.73 1.1 1.4 1.6 1.8 2.7 3.5 3.8 4.0 4.4 4.7 5.3 6.0 5.0 5.8 6.6 7.4 8.0 8.6 8.9 9.6 9.9 10.4 10.9 11.6 11.8 12.5 13.5 14.0 15.0 15.5 16.5 RATED DC CURRENT (mA) 1600 1400 1200 1000 900 800 720 650 590 500 460 430 360 300 290 275 265 250 235 220 170 164 158 155 150 145 142 137 135 131 128 124 123 120 115 113 110 107 104 IRON CORE IND. TOL. MODEL (1) (μH) (%) IM-6RFCS-40 2.7 ± 10 IM-6RFCS-40 3.3 ± 10 IM-6RFCS-40 3.9 ± 10 IM-6RFCS-40 4.7 ± 10 IM-6RFCS-40 5.6 ± 10 IM-6RFCS-40 6.8 ± 10 IM-6RFCS-40 8.2 ± 10 IM-6RFCS-40 10 ± 10 IM-6RFCS-40 12 ± 10 IM-6RFCS-40 15 ± 10 IM-6RFCS-40 18 ± 10 IM-6RFCS-40 22 ± 10 IM-6RFCS-40 27 ±5 IM-6RFCS-40 33 ±5 IM-6RFCS-40 39 ±5 IM-6RFCS-40 47 ±5 IM-6RFCS-40 56 ±5 IM-6RFCS-40 68 ±5 IM-6RFCS-40 82 ±5 IM-6RFCS-40 100 ±5 IM-6RFCS-40 120 ±5 IM-6RFCS-40 150 ±5 IM-6RFCS-40 180 ±5 IM-6RFCS-40 220 ±5 IM-6RFCS-40 270 ±5 IM-6RFCS-40 300 ±5 IM-6RFCS-40 330 ±5 IM-6RFCS-40 360 ±5 IM-6RFCS-40 390 ±5 IM-6RFCS-40 430 ±5 IM-6RFCS-40 470 ±5 IM-6RFCS-40 510 ±5 IM-6RFCS-40 560 ±5 IM-6RFCS-40 620 ±5 IM-6RFCS-40 680 ±5 IM-6RFCS-40 750 ±5 IM-6RFCS-40 820 ±5 IM-6RFCS-40 910 ±5 IM-6RFCS-40 1000 ±5 Note (1) Model electricals and tolerances shown MARKING - Color coded per MIL-PRF-15305 (latest revision) ORDERING INFORMATION IM-6RFCS-40 10 μH ± 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M 0 6 R MODEL Document Number: 34034 Revision: 15-Jul-09 F C S E R PACKAGE CODE 1 0 INDUCTANCE VALUE For technical questions, contact: [email protected] 0 K INDUCTANCE TOLERANCE 4 0 SERIES www.vishay.com 19 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000