IMS-5SWD-65 Vishay Dale Inductors, Commercial, Miniature, Molded, Shielded, Axial Leaded FEATURES • Ultra-reliable molded shielded miniature RF inductor • Epoxy molded envelope and shielding ELECTRICAL SPECIFICATIONS Inductance Range: 0.1 μH to 820 μH • Offers reliability, electrical performance and minimum coupling in high density packaging Inductance Tolerance: ± 10 % • Compliant to RoHS directive 2002/95/EC Dielectric Strength: 700 VRMS at sea level DENSITY SPECIFICATIONS Operating Temperature: - 55 °C to + 125 °C Self-Resonant Frequency: Measured per MIL-PRF-15305 (latest revision) Q: Measured on a Q-meter Weight: 0.75 g maximum Shielding: At the test frequency, two units assembled side by side exhibit less than 3 % coupling Maximum Current: Based on temperature rise not to exceed 35 °C at + 90 °C ambient ENVIRONMENTAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Vibration: High frequency, 10 Hz to 2000 Hz at 20 G ± 10 % maximum for 12 logarythmic swings each of 20 min duration repeated for each of three mutually perpendicular planes Terminal Strength: Meets 5 lb pull test, three 360° rotations in alternate directions when tested per MIL-PRF-15305 (latest revision) Moisture: Per MIL-STD-202, method 106 Shock: 100 g, 6 ms DIMENSIONS in inches [millimeters] 1.438 ± 0.188 [36.52 ± 4.78] #22 0.025 ± 0.002 [0.635 ± 0.051] TCW 0.162 ± 0.010 [4.11 ± 0.254] 0.410 ± 0.020 [10.41 ± 0.508] STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. (μH) TOL. (%) Q MIN. TEST FREQUENCY Q (MHz) SRF MIN. (MHz) DCR MAX. (Ω) RATED DC CURRENT (mA) IMS-5SWD-65 0.10 ± 10 50 25 250 0.025 2900 2900 IMS-5SWD-65 0.12 ± 10 51 25 250 0.034 2800 2800 IMS-5SWD-65 0.15 ± 10 51 25 250 0.037 2750 2750 IMS-5SWD-65 0.18 ± 10 50 25 250 0.047 2200 2200 IMS-5SWD-65 0.22 ± 10 49 25 250 0.067 1700 1700 IMS-5SWD-65 0.27 ± 10 47 25 250 0.11 1500 1500 IMS-5SWD-65 0.33 ± 10 46 25 250 0.13 1300 1300 IMS-5SWD-65 0.39 ± 10 44 25 250 0.18 1100 1100 IMS-5SWD-65 0.47 ± 10 44 25 235 0.25 1000 1000 IMS-5SWD-65 0.56 ± 10 43 25 210 0.33 900 900 IMS-5SWD-65 0.68 ± 10 42 25 190 0.45 750 750 IMS-5SWD-65 0.82 ± 10 40 25 180 0.59 600 600 PHENOLIC CORE INCREMENTAL CURRENT (mA) (1) Note (1) Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value Document Number: 34050 Revision: 15-Jul-09 For technical questions, contact: [email protected] www.vishay.com 1 IMS-5SWD-65 Inductors, Commercial, Miniature, Molded, Shielded, Axial Leaded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS Q MIN. 47 46 45 43 45 46 44 44 44 47 50 50 49 55 44 45 46 49 45 53 52 49 51 45 52 57 56 60 58 60 54 67 60 60 60 57 TEST FREQUENCY Q (MHz) 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 SRF MIN. (MHz) 140 130 115 105 100 92 85 75 70 65 55 50 46 44 49 45 41 38 34 29 27 25 21 10.5 10 9.7 8.5 8.0 7.5 7.0 6.5 6.2 5.7 4.7 4.5 4.2 DCR MAX. (Ω) 0.07 0.093 0.12 0.14 0.19 0.28 0.35 0.40 0.55 0.72 1.02 1.32 1.62 2.0 0.80 0.89 0.96 1.19 1.37 1.93 2.11 2.23 2.70 2.44 3.12 3.6 4.1 4.4 5.0 5.8 6.4 7.4 9.5 10.5 11.8 13.0 MODEL IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 Note (1) Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value RATED DC CURRENT (mA) 1900 1600 1300 1200 1100 950 800 750 650 550 500 475 450 400 620 610 600 500 490 410 400 380 370 360 325 290 275 260 250 240 225 200 180 174 168 152 INCREMENTAL CURRENT (mA) (1) 1900 1600 1300 1200 1100 950 800 750 650 550 500 475 450 400 250 235 220 200 190 180 175 160 150 140 120 95 90 85 80 70 65 60 58 55 50 45 IRON CORE TOL. (%) ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 FERRITE CORE IND. (μH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 MARKING - Color coded per MIL-PRF-15305 ORDERING INFORMATION IMS-5SWD-65 0.47 μH 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M S 5 MODEL www.vishay.com 2 S W D E R PACKAGE CODE R 4 INDUCTANCE VALUE For technical questions, contact: [email protected] 7 K 6 INDUCTANCE TOLERANCE 5 SERIES Document Number: 34050 Revision: 15-Jul-09 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000