Download Catalog

CH
EA ce
/R lian
HSmp
Ro Co
High Frequency
Ceramic Solutions
Antennas (88 MHz-10 GHz)
Baluns
Capacitors (Hi Q, Low Loss)
Chipset-Specific Impedance
Matched Balun-Filters
Couplers
Diplexers
Filters (Band-Pass, Low-Pass, etc)
Inductors (Wirewound & Monolithic)
IPC’s (Integrated Passive Components)
Modules
90 Hybrids
Substrates
4001 CALLE TECATE, CAMARILLO, CALIFORNIA 93012 • Tel (805) 389-1166 • Fax (805) 389-1821
2
www.johansontechnology.com
Your Technology Partner
The mission of the Johanson companies is to
translate our customer needs into quality electronic
components, produced in factories that are models
of excellence, supported by innovative service. With
over 20 years of experience, Johanson Technology
can provide both standard and custom technology
solutions tailored to your specific RF/Microwave
applications. Our software design tools, library
of more than 20 dielectric materials and various
metal systems, and our thin-film and thick-film
manufacturing capabilities enable us to produce
components that are ideally suited to your specific
needs.
Johanson Technology’s ISO 9001 Certified
design and manufacturing operations are
located in Camarillo, California. Our quality
minded management system utilizes the latest in
computerized SPC systems and continuous
improvement programs focused on increased
product reliability, manufacturing through-put,
and production yields. Our broad experience,
applications support, software libraries, and
responsive service enhance our ability to drive down
your total cost of procurement and speed your time
to market.
CONTENTS
Prototyping Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
JTISoft® Capacitor & Inductor Modeling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Multi-Layer High-Q Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18
Monolithic Ceramic Chip Inductors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21
Wire Wound Ceramic Chip Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-27
Integrated Passive Component Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Band Pass Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-33
High Pass Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
EMI Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Low Pass Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-36
Directional Couplers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37
Baluns & Balun Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-40
Diplexers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42
Integrated Passive Component Case Size Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-44
Custom LTCC Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
LASERtrim® RF Tuning Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-49
Broadband Single Layer Capacitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-51
Single Layer Microwave Capacitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-57
Custom Substrates & Thin Film Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59
Chip Capacitor Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Chip Inductor & Wirewound Inductor Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Technical Notes List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Additional application notes may be found on our web site.
Johanson Technology, Inc. reserves the right to make design and price changes without notice. All sales are subject to the
terms and conditions printed on the back side of our sales order acknowledgment forms including a limited warranty and
remedies for non-conforming goods or defective goods. We will be pleased to provide a copy of these terms and conditions
for your review.
www.johansontechnology.com
3
RF Ceramic Component Proto-Typing Kits
Johanson Technology’s engineering prototype kits provide RF designers with a broad selection
of high frequency ceramic components. Each kit contains a selection of components as well as
the latest product data on Johanson’s full line of “High Frequency Ceramic Solutions”. List price
is $100.00 each, but price may be waived for qualified high volume applications. The selections
listed below represents typical kit contents. Johanson reserves the right to make limited value/tolerance
substitutions when necessary. Please advise any critical values at time of order.
Capacitor and Inductor Design Kits
0201 L-Series Capacitors & Ceramic Inductors
(Values {pF or nH} & tolerances)
P/N : L/C-201DL
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.8 C, 8.2 C, 9.1 C, 10 J, 12
J, 15 J, 18 J, 22 J, 27 J, 33 J
50 PCS. EA. MLCI (nH): 0.6 C, 0.8 C, 1.0 S, 1.2 S, 1.5 S, 1.8 S, 2.2 S, 2.4 S, 2.7 S, 3.0 S, 3.3 S, 3.7 S, 3.9 S, 4.7 S, 5.1 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 13 J, 15 J, 18 J, 20 J,
22 J, 27 J, 33 J, 39 J
0402 S-Series Capacitors & Ceramic Inductors
(Values {pF or nH} & tolerances)
P/N : L/C-402DS
50 PCS. EA. MLCC (pF): 0.2 B, 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.6 B, 4.3 B, 4.7 B, 5.6 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10
J, 12 J, 15 J, 22 J, 27 J, 30 J
50 PCS. EA. MLCI (nH): 1.0 S, 1.2 S, 1.5 S, 1.8 S, 2.2 S, 2.4 S, 2.7 S, 3.0 S, 3.3 S, 3.9 S, 4.3 S, 4.7 S, 5.1 S, 5.6 S, 6.8 J, 7.5 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J,
39 J, 47 J, 68 J, 100 J
0603 S-Series Capacitors & Ceramic Inductors
(Values {pF or nH} & tolerances)
P/N : L/C-603DS
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.8 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.6 B, 3.9 B, 4.7 B, 5.6 C, 6.8 C, 8.2 C, 10 J, 12 J, 15 J, 18 J, 20 J, 24 J, 27 J, 33
J, 39 J, 47 J, 68 J, 82 J
50 PCS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120
J, 150 J, 180 J, 220 J
0805 S-Series Capacitors & WireWound High Q Chip Inductors
(Values {pF or nH} & tolerances)
P/N : L/C-805DS
50 PCS. EA. MLCC (pF): 4.7 B, 5.6 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J, 18 J, 20 J, 22 J, 24 J, 27 J, 30 J, 33 J, 36 J, 39 J, 43 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J,
150 J, 180 J, 220 J
20 PCS. EA. (nH): 2.7 C, 3.9 C, 5.6 C, 6.8 J, 8.2 J, 12 J, 16 J, 20 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J, 150 J, 180 J, 220 J, 270 J, 330 J, 390 J, 560 J, 1000
J, 2200 J, 6800 J, 10000 J
Non-Magnetic Capacitor Designer Kit
EIA 1111 S42E-Series Capacitors (Values {pF} & tolerances) Non-Magnetic
P/N: S111DUE
10 PCS. EACH (pF): 1.0 B 3.9 B, 4.7 B, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J, 18 J, 20 J, 27 J, 33 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J, 150 J, 180 J, 220 J, 270 J, 390
J, 470 J, 560 K, 1000 K
Tuning Capacitor Kits
0201 L-Series Capacitors (Values {pF} & tolerances)
P/N: S201TL
0201 L-Series Ultra High-Q Capacitors (Values {pF} & tolerances)
P/N: S201DS
0402 S-Series Capacitors (Values {pF} & tolerances)
P/N: S402TS
50 PCS. EACH (pF): 0.2 A, 0.3 A, 0.4 A, 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B,
4.7 B, 5.1 C, 5.6 C, 6.2 C, 6.8 C
50 PCS. EACH (pF): 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.3 B, 1.5 B, 1.6 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.8 C,
8.2 C, 9.1 C, 10 J, 12 J, 15 J
50 PCS. EACH (pF): 0.2 A, 0.3 A, 0.4 A, 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B,
4.7 B, 5.1 C, 5.6 C, 6.2 C, 6.8 C
0603 S-Series Capacitors (Values {pF} & tolerances)
50 PCS. EACH (pF): 0.2 B, 0.3 B, 0.4 B, 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B,
4.7 B, 5.1 C, 5.6 C, 6.2 C, 6.8 C
0805 S-Series Capacitors (Values {pF} & tolerances)
50 PCS. EACH (pF): 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.2 C,
6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J
1111 E-Series Capacitors (Values {pF} & tolerances)
P/N: S603TS
P/N: S805TS
P/N: S111TVE
10 PCS. EACH (pF): 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.2 C,
6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J
Non-Magnetic Capacitor Tuning Kit
EIA 1111 S42E-Series Capacitors (Values {pF} & tolerances) Non-Magnetic
P/N: S111TUE
10 PCS. EACH (pF): 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.2 C,
6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J
Broadband Single Layer Capacitors
Single Layer Capacitor Kits
10 PCS. EACH: 500V01A470MT4W, 500U01A800MT4W, 500U01A101MT4W, 160U01A331MT4W, 160U01A471MT4W, 250U02A471MT4W, 250U02A471MT4W-10,
160U02A102MT4W, 500U03A561MT4W-10, 160U03A222MN4W
4
www.johansontechnology.com
P/N: GBBL
Standard Single Layer Capacitors
Broadband Single Layer Capacitors
10 PCS. EACH: 500U10N0R4BT4W, 101V10L1R5MT4W, 500U10B5R1KT4W, 500V15W100KN4W, 101U15T500MT4W, 101U20X390MT4W, 500U20T101KT4W,
500U25N2R0CN4W, 101V25T101MN4W, 101V30Y471MT4W
P/N: SLC
Tuning Capacitor
Kits
WireWound
Inductor
Kits
0402 WireWound High Q Chip Inductors (Values {nH} & tolerances)
P/N: L402W
20 PCS. EACH (nH): 1.0 C, 1.8 C, 2.0 C, 2.7 C, 3.3 C, 3.9 C, 4.7 C, 5.6 C, 6.8 J, 7.5 J, 8.2 J, 9.0 J, 10 J, 12 J, 15 J, 18 J, 20 J, 22 J, 24 J, 27 J, 30 J, 33 J, 39 J, 47 J, 56 J,
82 J, 100 J, 120 J
0603 WireWound High Q Chip Inductors (Values {nH} & tolerances)
P/N: L603W
20 PCS. EACH (nH): 1.6 C, 1.8 C, 2.0 C, 3.9 C, 4.7 C, 5.1 C, 5.6 C, 6.8 J, 7.5 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 72 J, 82 J, 100 J, 150 J,
180 J, 270 J, 330 J
0805 WireWound High Q Chip Inductors (Values {nH} & tolerances)
P/N: L805W
20 PCS. EACH (nH): 2.7 C, 3.9 C, 5.6 C, 6.8 J, 8.2 J, 12 J, 16 J, 20 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J, 150 J, 180 J, 220 J, 270 J, 330 J, 390 J, 560 J,
1000 J, 2200 J, 6800 J, 10000 J
(Individual) Capacitor, Inductor Designer Kits
0201 L-Series Capacitors (Values {pF} & tolerances)
P/N: S201DL
50 PCS. EACH (pF): 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.8 C, 8.2 C, 9.1 C, 10 J, 12 J,
15 J, 18 J, 22 J, 27 J, 33 J
0201 L-Series Ultra High-Q Capacitors Horizontal Electrode Orientation (Values {pF} & tolerances)
P/N: S201DS
Contains 50 PCS. EACH of the following 0201 capacitor sizes
(pF): 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.8 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J
P/N: L201DC
0201 Inductors (Values {nH} & tolerances)
50 PCS. EACH (nH): 0.6 C, 0.8 C, 1.0 S, 1.2 S, 1.5 S, 1.8 S, 2.2 S, 2.4 S, 2.7 S, 3.0 S, 3.3 S, 3.7 S, 3.9 S, 4.7 S, 5.1 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 13 J, 15 J, 18 J, 20 J,
22 J, 27 J, 33 J, 39 J
0402 S-Series Capacitors (Values {pF} & tolerances)
P/N: S402DS
50 PCS. EACH (pF): 0.2 B, 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.6 B, 4.3 B, 4.7 B, 5.6 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J,
12 J, 15 J, 22 J, 27 J, 30 J
P/N: L402DC
0402 Inductors (Values {nH} & tolerances)
50 PCS. EACH (nH): 1.0 S, 1.2 S, 1.5 S, 1.8 S, 2.2 S, 2.4 S, 2.7 S, 3.0 S, 3.3 S, 3.9 S, 4.3 S, 4.7 S, 5.1 S, 5.6 S, 6.8 J, 7.5 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J, 39
J, 47 J, 68 J, 100 J
0603 S-Series Capacitors (Values {pF} & tolerances)
P/N: S603DS
50 PCS. EACH (pF): 0.3 B, 0.5 B, 0.8 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.6 B, 3.9 B, 4.7 B, 5.6 C, 6.8 C, 8.2 C, 10 J, 12 J, 15 J, 18 J, 20 J, 24 J, 27 J, 33 J,
39 J, 47 J, 68 J, 82 J
P/N: L603DC
0603 Inductors (Values {nH} & tolerances)
50 PCS. EACH (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J,
150 J, 180 J, 220 J
0805 S-Series Capacitors (Values {pF} & tolerances)
P/N: S805DS
50 PCS. EACH (pF): 4.7 B, 5.6 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J, 18 J, 20 J, 22 J, 24 J, 27 J, 30 J, 33 J, 36 J, 39 J, 43 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J,
150 J, 180 J, 220 J
1111 E-Series Capacitors (Values {pF} & tolerances)
P/N: S111DVE
10 PCS. EACH (pF): 1.0 B, 3.9 B, 4.7 B, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J, 18 J, 20 J, 27 J, 33 J, 47 J, 56 J, 68 J, 82 J, 100 K, 120 K, 150 K, 180 K, 220 K, 270 K,
390 K, 470 K, 560 K, 1000 K
2.45GHz Designer Kit for WLAN, Bluetooth, Zigbee, ISM and 802.11
0402 S-Series Capacitors, 0402 Inductors & 2.45 GHz RF Components
P/N: 2450L/C402D
6 PCS. EA. BAND PASS FILTERS: 2450BP07A100 , 2450BP15B100
6 PCS. EA. CHIP ANTENNA: 2450AT18A100, 2450AT18B100, 2450AT42A100, 2450AT42B100, 2450AT43A100 , 2450AT43B100, 2450AT45A100
6 PCS. EA. LOW PASS FILTER: 2450LP14A100, 2450LP14B100, 2450LP15A050
6 PCS. EA. HIGH PASS FILTER: 2450HP14A100
6 PCS. EA. BALUN: 2450BL14C050, 2450BL14C100, 2450BL15B050, 2450BL15B100, 2450BL15B200
6 PCS. EA. FILTER BALUN: 2450FB15A050, 2450FB39A050
6 PCS. EA. DIPLEXER: 2450DP15A5512, 2450DP15D5400
50 PCS. EA. MLCC (pF): 0.3 B. 0.5 B. 1.0 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 C, 6.8 C, 8.2 C, 10 J
50 PCS. EA. MLCI (nH): 1.0 S,1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 15 J, 18 J, 27 J
0603 S-Series Capacitors, 0603 Inductors & 2.45 GHz RF Components
P/N: 2450L/C603D
6 PCS. EA. BAND PASS FILTERS: 2450BP07A100 , 2450BP15B100
6 PCS. EA. CHIP ANTENNA: 2450AT18A100, 2450AT18B100, 2450AT42A100, 2450AT42B100, 2450AT43A100, 2450AT43B100, 2450AT45A100
6 PCS. EA. LOW PASS FILTER: 2450LP14A100, 2450LP14B100, 2450LP15A050
6 PCS. EA. HIGH PASS FILTER: 2450HP14A100
6 PCS. EA. BALUN: 2450BL14C050, 2450BL14C100, 2450BL15B050, 2450BL15B100, 2450BL15B200
6 PCS. EA. FILTER BALUN: 2450FB15A050, 2450FB39A050
6 PCS. EA. DIPLEXER: 2450DP15A5512, 2450DP15D5400
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 1.0 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 C, 5.6 C, 6.8 C, 8.2 C, 10 J
50 P CS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 15 J, 18 J, 27 J
www.johansontechnology.com
5
5.5GHz Designer Kit for WLAN, Bluetooth, ISM and 802.11
0402 S-Series Capacitors, 0402 Inductors & RF Components
P/N: 5500L/C402D
6 PCS. EA. BAND PASS FILTERS: 5515BP15C1020, 5515BP15B725, 5515BP15B730, 5515BP15C975, 5487BP15B675, 5487BP15C675
6 PCS. EA. CHIP ANTENNA: 2450AD46A5400, 5250AT43A200, 5400AT18A1000, 5500AT07A0900
6 PCS. EA. LOW PASS FILTER 5515LP15A730
6 PCS. EA. BALUN: 5400BL15B050, 5400BL15B100, 5400BL15K050, 5400BL14B100, 5800BL15B100
6 PCS. EA. DIPLEXER: 2450DP15A5512, 2450DP15K5400, 2450DP15D5400, 2450DP15E5400
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.8 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 C
50 PCS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J
0603 S-Series Capacitors, 0603 Inductors & RF Components
P/N: 5500L/C603D
6 PCS. EA. BAND PASS FILTERS: 5515BP15C1020, 5515BP15B725, 5515BP15B730, 5515BP15C975, 5487BP15B675, 5487BP15C675
6 PCS. EA. CHIP ANTENNA: 2450AD46A5400, 5250AT43A200, 5400AT18A1000, 5500AT07A0900
6 PCS. EA. LOW PASS FILTER 5515LP15A730
6 PCS. EA. BALUN: 5400BL15B050, 5400BL15B100, 5400BL15K050, 5400BL14B100, 5800BL15B100
6 PCS. EA. DIPLEXER: 2450DP15A5512, 2450DP15K5400, 2450DP15D5400, 2450DP15E5400
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.8 B,1.0 B, 1.2 B,1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 C
50 PCS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J
Internet of Things, ISM Development Kit (IoT)
0402 RFCC - Internet of Things ISM Development Kit, S-Series Capacitors, RF Chip Inductors
P/N: IOT-L/C402D-1
8 PCS. EA. 400MHz HiRej LPF: 0400LP15A0122
8 PCS. EA. 2.4G ANT Hi-Gain: 2450AT45A100
8 PCS. EA. 430MHz ISM Ant: 0433AT62A0020
8 PCS. EA. 2.4G BPF EIA0805: 2450BP15B100
8 PCS. EA. TI CC11XX 400MHz: 0433BM15A0001
8 PCS. EA. 2.4G Balun 1:2: 2450BL15B100
8 PCS. EA. 500MHz LPF: 0500LP15A500
8 PCS. EA. 2.4G Balun 1:1: 2450BL15B050
8 PCS. EA. TI CC11XX 900MHz: 0896BM15A0001
8 PCS. EA. nRF51 BAL-BPF: 2450BM14E0003
8 PCS. EA. AT86RF215 900MHz: 0896BM15E0025
8 PCS. EA. CC26XX BAL-BPF: 2450BM14G0011
8 PCS. EA. 868/915 Antenna: 0900AT43A0070
8 PCS. EA. CC25/24XX BAL-FL: 2450BM15A0002
8 PCS. EA. 868/928 HiRejLPF: 0900LP15B0063
8 PCS. EA. AT86RF23X SAMR21: 2450BM15A0015
8 PCS. EA. 868/915 LPF: 0915LP15B026
8 PCS. EA. 2.4G BPF EIA0603: 2450BP14F0100
8 PCS. EA. CC12xx BAL FIL: 0900PC15J0013
8 PCS. EA. 2.4G BPF EIA0805: 2450BP15H0100
8 PCS. EA. 2.4GHz Micro ANT: 2450AT07A0100
8 PCS. EA. 2.4G LPF EIA0603: 2450LP14B100
8 PCS. EA. 2.4GHz Mini ANT: 2450AT18A100
8 PCS. EA. 2.4G LPF EIA0805: 2450LP15B050
8 PCS. EA. 2.4GHz ANT Gain: 2450AT18D0100
8 PCS. EA. AT86RF23X Mega12: 2450FB15L0001
8 PCS. EA. 2.4G ANT Corner: 2450AT42B100
8 PCS. EA. 2.4G METAL GND: 2450AT42E0100
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.8 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 B, 6.8 C
50 PCS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J
Standard Termination for all kits - 100% Sn. Consult Factory for other termination options
JTISOFT® 2.0 CAPACITOR & INDUCTOR MODELING SOFTWARE
®
®
JTIsoft consists of two advanced design simulation software programs which offer component modeling from 1 MHz to 20 GHz. MLCsoft provides S-Parameter
®
and SPICE modeling data for six different size high frequency multi-layer ceramic capacitors (MLCCs) chip sizes while MLIsoft provides S-Parameter and SPICE
modeling on four different size high frequency multi-layer ceramic inductors (MLCIs). The main interface screen displays electrical parameters such as SRF, PRF1,
PRF2, ESR, Q, Ceff, Leff, Rdc, and Idc which are updated dynamically as chip size, value, and frequency parameters are varied by the user. The complete part
number is also dynamically displayed for ordering accuracy.
Both programs also provide highly detailed graphical plots of device performance over a user specified frequency range. The chart displays are instantly updated
as the user makes component or frequency changes. Smith chart displays of both impedance and S11/S22 are available as point plots, line plots, and line-point
plots. Traditional X-Y graphs are available for parameters of S21 and S11 both phase and magnitude, Impedance magnitude, as well as Q, ESR and effective
capacitance. Display formats include standard, log Y, and log/log. Chart may be exported in BMP or Metafile format. Numerical S-Parameter data may be
displayed and exported as an .S2P format file.
JTIsoft® is available for download from our web site.
6
www.johansontechnology.com
MulTi-layer HigH-Q CapaCiTors
These lines of multilayer capacitors have been developed for
High-Q and microwave applications.
• The S-Series (R07S, R14S, R15S) capacitors give an ultrahigh Q performance, and exhibit NP0 temperature characteristics.
• The L-Series (R05L) capacitors give mid-high Q performance,
and exhibit NP0 temperature characteristics.
• The E-Series (S42E, S48E, S58E) capacitors give excellent
high-Q performance from HF to Microwave frequencies.
Typical uses are high voltage, high current applications. They
are offered in chip (Ni barrier or Non-Magnetic Pt.-Ag) or in
Non-Magnetic leaded form.
• RoHS compliance is standard for all unleaded parts (see
termination options box).
How To order
252
S48
470
E
V
K
4
E
2
WVDC
250 = 25 V
201 = 200 V
251 = 250 V
501 = 500 V
102 = 1000 V
152 = 1500 V
252 = 2500 V
362 = 3600 V
722 = 7200 V
CASE SIZE
R05 (0201)
R07 (0402)
R14 (0603)
R15 (0805)
S42 (1111)
S48 (2525)
S58 (3838)
CAPACITANCE (pF)
1st two digits are
significant; third digit
denotes number of
zeros, R = decimal.
100 = 10 pF
101 = 100 pF
DIELECTRIC
S = Ultra High Q NPO
L = High Q NPO
E = Ultra High Q NPO,
High Voltage, High Power
TOLERANCE
< 10pF
A = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
≥ 10pF
F = ±1 %
G = ±2%
J = ±5%
K = ± 10%
For tolerance
availability, see chart.
TERMINATION
Nickel Barrier
V = Ni/Sn (Green)
T = Ni/SnPb
G = Ni/Au (Green)
Non-Mag1
U = Cu/Sn (Green)
C = Cu/SnPb
Leaded (All Non-Mag)1
1 = Microstrip
2 = Axial Ribbon
3 = Axial Wire
4 = Radial Ribbon
5 = Radial Wire
Part Number written: 252S48E470KV4E
MARKING
3 = Cap Code
& Tolerance
4 = No Marking
6 = EIA Code
(Marking option is
only available on
PACKAGING
S = Bulk
W = Waffle Pack
0201 - 0603
Y = Paper 5” Reel
T = Paper 7” Reel
R1 = Paper 13” Reel
J1 = Paper 5” Reel Horizontally Oriented Electrodes
1
N = Paper 5” Reel -
Vertically Oriented Electrodes
1
L = Paper 7” Reel -
Horizontally Oriented Electrodes
1
V = Paper 7” Reel -
Vertically Oriented Electrodes
0805 - 3838
Z = Embossed 5” Reel
E = Embossed 7” Reel
U1 = Embossed 13” Reel
M1 = Embossed 5” Reel Horizontally Oriented Electrodes
1
Q = Embossed 5” Reel -
Vertically Oriented Electrodes
1
G = Embossed 7” Reel -
Horizontally Oriented Electrodes
1
P = Embossed 7” Reel -
Vertically Oriented Electrodes
Tape specifications
conform to EIA RS481
0805 and larger
case sizes)
1
2
- Not available for all MLCC - Call factory for info.
- WVDC - Working Voltage DC.
www.johansontechnology.com
7
low esr / HigH-Q CapaCiTor seleCTion CHarT
RF Power Applications
EIA Size
0201 (R05)
Cap. Value
NPO
(R05L)
NPO
(R05G)
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
0402
(R07S)
0603
(R14S)
0805
(R15S)
0805
(R15G)
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/250 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50 V
50 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1111
(S42E)
2525
(S48E)
3838
(S58E)
Capacitance
pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
Code
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
240
270
300
330
A
B
C
D
A**
B
C
D
F
G
J
K
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
Consult factory for Non-Standard values.
**A tolerance only available for R07S (0402) and R14S(0603) caps
8
www.johansontechnology.com
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
low esr / HigH-Q CapaCiTor seleCTion CHarT
RF Power Applications
EIA Size
0201 (R05)
Cap. Value
Capacitance
pF
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1200
1500
1800
2200
2700
3300
3900
4700
5100
10000
Code
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
122
152
182
222
272
332
392
472
512
103
NPO
(R05L)
NP0
(R05G)
0402
(R07S)
0603
(R14S)
0805
(R15S)
0805
(R15G)
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1111
(S42E)
2525
(S48E)
3838
(S58E)
Tolerance
F
G
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
J
K
G
J
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
300V
300V
300V
300V
300V
300V
300V
200V
200V
200V
200V
200V
200V
200V
200V
200V
200V
200V
200V
200V
200V
200V
200V
200V
K
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1500V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
600V
600V
600V
600V
600V
500V
500V
500V
500V
500V
500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
1500V
1500V
1500V
1500V
1500V
1500V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
500V
500V
300V
300V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
1000V
1000V
1000V
1000V
1000V
1000V
500V
500V
500V
500V
500V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
Consult factory for Non-Standard values.
www.johansontechnology.com
9
dieleCTriC CHaraCTerisTiCs
npo
TEMPERATURE COEFFICIENT:
0 ± 30ppm /°C, -55 to 125°C
QUALITY FACTOR / DF:
Q >1,000 @ 1KHz (C>1,000pF), Typical 10,000 (C<1,000 pF)
INSULATION RESISTANCE:
>100 GΩ @ 25°C,WVDC1;
125°C IR is 10% of 25°C rating
DIELECTRIC STRENGTH:
500 V ≤ 2.5 X WVDC1 Min., 25°C, 50 mA max
1000 V ≤ 1.5 X WVDC1 Min., 25°C, 50 mA max
> 1500 = 1 X WVDC1 Min., 25°C, 50 mA max
1MHz ±50kHz, 1.0±0.2 VRMS, 25°C
TEST PARAMETERS::
AVAILABLE CAPACITANCE:
Size 0201:
Size 0402:
Size 0603:
Size 0805:
0.2 - 100 pF
0.2 - 33 pF
0.2 - 100 pF
0.3 - 220 pF
Size 1111: 0.2 - 1000 pF
Size 2525: 1.0 - 2700 pF
Size 3838: 1.0 - 5100 pF
MeCHaniCal & environMenTal CHaraCTerisTiCs
SPECIFICATION
SOLDERABILITY:
RESISTANCE TO
SOLDERING HEAT:
TERMINAL
ADHESION:
PCB DEFLECTION:
LIFE TEST:
THERMAL CYCLE:
HUMIDITY,
STEADY STATE:
HUMIDITY,
LOW VOLTAGE:
VIBRATION:
Solder coverage ≥ 90% of metalized areas
No termination degradation
No mechanical damage
Capacitance change: ±2.5% or 0.25pF
Q>500 I.R. >10 G Ohms
DWV2: 2.5 x WVDC1
Termination should not pull off.
Ceramic should remain undamaged.
No mechanical damage.
Capacitance change: 2% or 0.5pF Max
MIL-STD-202, Method 108l
No mechanical damage
Capacitance change: ±3.0% or 0.3 pF
Q>500 I.R. >1 G Ohms
DWV2: 2.5 x WVDC1
No mechanical damage.
Capacitance change: ±2.5% or 0.25pF
Q>2000 I.R. >10 G Ohms
DWV2: 2.5 x WVDC1
No mechanical damage.
Capacitance change: ±5.0% or 0.50pF max.
Q>300 I.R. ≥ 1 G-Ohm
DWV2: 2.5 x WVDC1
No mechanical damage.
Capacitance change: ±5.0% or 0.50pF max.
Q>300 I.R. = 1 G-Ohm min.
DWV2: 2.5 x WVDC1
No mechanical damage.
Capacitance change: ±2.5% or 0.25pF
Q>1000 I.R. ≥ 10 G-Ohm
DWV2: 2.5 x WVDC1
TEST PARAMETERS
Preheat chip to 120°-150°C for 60 sec., dip terminals in rosin flux
then dip in Sn62 solder @ 240°±5°C for 5±1 sec
Preheat device to 80°-100°C for 60 sec.
followed by 150°-180°C for 60 sec.
Dip in 260°±5°C solder for 10±1 sec.
Measure after 24±2 hour cooling period
Linear pull force3 exerted on axial leads soldered to each terminal.
Glass epoxy PCB: 0.5 mm deflection
Applied voltage: 200% of WVDC1 for capacitors rated at 500 volts DC or less.
100% of WVDC1 for capacitors rated at 1250 volts DC or less.
Temperature: 125°±3°C
Test time: 1000+48-0 hours
5 cycles of: 30±3 minutes @ -55°+0/-3°C,
2-3 min. @ 25°C, 30±3 min. @ +125°+3/-0°C,
2-3 min. @ 25°C
Measure after 24±2 hour cooling period
Relative humidity: 90-95%
Temperature: 40°±2°C
Test time: 500 +12/-0 Hours
Measure after 24±2 hour cooling period
Applied voltage: 1.5 VDC, 50 mA max.
Relative humidity: 85±2% Temperature: 40°±2°C
Test time: 240 +12/-0 Hours
Measure after 24±2 hour cooling period
Cycle performed for 2 hours in each of three perpendicular directions
Frequency range 10Hz to 55 Hz to 10 Hz traversed
in 1 minute. Harmonic motion amplitude: 1.5mm
1
- WVDC - Working Voltage DC.
- DWV - Dielectric Withstanding Voltage.
- 0402 ≥ 2.0lbs, 0603 ≥ 4.0lbs (min).
4
- Whichever is less.
2
3
10
www.johansontechnology.com
MeCHaniCal CHaraCTerisTiCs
Size
Units
EIA 0201
Metric (0603)
EIA 0402
Metric (1005)
EIA 0603
Metric (1608)
EIA 0805
Metric (2012)
In
Length
Width
Thickness
End Band
.024 ±.001
.012 ±.001
.012 ±.001
.008 Max.
(0.20 Max.)
(0.60 ±0.03)
(0.30 ±0.03)
(0.30 ±0.03)
In
.040 ±.004
.020 ±.004
.020 ±.004
.010 ±.006
mm
(1.02 ±0.1)
(0.51 ±0.1)
(0.51 ±0.1)
(0.25 ±.15)
.062 ±.006
.032 ±.006
.030 +.005/-.003
.014 ±.006
(1.57 ±0.15)
(0.81 ±0.15)
(0.76 +.13-.08)
(0.35 ±.15)
mm
In
mm
In
mm
.080 ±.008
.050 ±.008
.040 ±.006
.020 ±.010
(2.03 ±0.20)
(1.27 ±0.20)
(1.02 ±.15)
(0.50 ±.25)
HorizonTal and verTiCle orienTed CapaCiTors
Horizontal Electrode Orientation
Vertical Electrode Orientation
APPLICATIONS & FEATURES
Size:
Performance:
Termination:
Applications:
EIA 0201, 0402
SRF’s up to 20 GHz, Ultra High Q, Tight tolerance, Ultralow ESR
Ni/Au, Ni/Sn, Ni/SnPb
High Frequency Wireless Communications, Portable Wireless Products, Battery Powered
Products
RoHS Compliant
BENIFITS OF USING ORIENTED CAPACITORS
•
•
•
•
•
Consistent Orientation - Improved repeatability of production circuits.
Consistent Orientation - More consistent filter performance.
Vertical Orientation - The elimination of parallel frequencies.
Vertical Orinetation - Lower inductance for a given capacitor.
Horizontal Orientation - Lower coupling between adjacent capacitors.
www.johansontechnology.com
11
e-series TerMinaTions and leads
CHIP DIMENSIONS
Size
Termination
S42E
V,T
U,C
S48E
S58E
Units
In
mm
In
mm
In
mm
L
Tol
0.110
2.79
0.230
5.84
0.380
9.65
+.020
+0.51
+.025
+0.63
+.015
+0.38
-.010
-0.25
-.010
-0.25
-.010
-0.25
For all E-Series Models:
W
Tol
T
E/B
Tol
0.110
2.79
0.250
6.35
0.380
9.65
+/- .015
+/- 0.38
+/- .015
+/- 0.38
+/- .010
+/- 0.25
0.102 Max.
2.59 Max.
0.150 Max.
3.81 Max.
0.170 Max.
4.32 Max.
0.015 Typ.
0.38 Typ.
0.025 Typ.
0.63 Typ.
0.025 Typ.
0.63 Typ.
+/- 0.008
+/- 0.20
OPERATING TEMP. :
INSULATION RESISTANCE:
TEMPERATURE COEFFICIENT:
-55 to +125°C
>10G Ω @ 25°C
0 ± 30ppm /°C, -55 to
125°C
DISSIPATION FACTOR (TYP.):
< 0.05% @ 1 MHz
Drawings not to scale
Unleaded Termination Codes “V” (Ni/Sn),
“T” (Ni/SnPb), “U” (Cu/Sn non-mag), “C”
(Cu/SnPb non-mag)
Microstrip Ribbon Leads (Non-Magnetic),
Termination Code “1”
Axial Ribbon Leads (Non-Magnetic), Termination Code “2”
e
e
W
L
X
E/B
X
T
LL
Axial Wire Leads (Non-Magnetic),
Termination Code “3”
LL
Radial Ribbon Leads (Non-Magnetic), Termination Code “4”
e
LL
LL
LL
Radial Wire Leads (Non-Magnetic),
Termination Code “5”
e
X
LL
T
LL
LL
W
W
LL
T
LL
W
X
X
LL
e
Lead
1
Size
LL(min)
X
Tol
e
e-Tol
S42E
0.25
6.40
0.394
10.0
0.748
19.00
0.25
6.40
0.394
10.00
0.748
19.00
0.25
6.40
0.394
10.00
0.748
19.00
0.093
2.36
0.217
5.5
0.35
8.90
0.093
2.36
0.217
5.50
0.35
8.90
+/-0.005
+/- 0.13
+/- 0.02
+/- 0.50
+/- 0.02
+/- 0.50
+/-0.005
+/- 0.13
+/- 0.02
+/- 0.50
+/- 0.02
+/- 0.50
0.004
0.102
0.009
0.220
0.010
0.250
0.004
0.102
0.009
0.220
0.010
0.25
+/- 0.002
+/- 0.051
- 0.0019/+ 0.0031
- 0.050/+ 0.080
- 0.0019/+ 0.0039
- 0.050/+ 0.100
+/- 0.002
+/- 0.051
- 0.0019/+ 0.0031
- 0.050/+ 0.080
- 0.0019/+ 0.0039
- 0.050/+ 0.100
S48E
S58E
S42E
2
S48E
S58E
S42E
3
S48E
S58E
12
e
Lead
4
Size
LL(min)
X
Tol
e
e-Tol
S42E
0.352
8.90
0.501
12.70
0.886
22.50
0.25
6.40
0.394
10.00
0.748
19.00
0.093
2.36
0.217
5.50
0.35
8.90
+/-0.005
+/- 0.13
+/- 0.02
+/- 0.50
+/- 0.02
+/- 0.50
0.004
0.102
0.009
0.220
0.010
0.25
+/- 0.002
+/- 0.051
- 0.0019/+ 0.0031
- 0.050/+ 0.080
- 0.0019/+ 0.0039
- 0.050/+ 0.100
S48E
S58E
S42E
5
S48E
S58E
0.020in (0.511) diameter wire
www.johansontechnology.com
0.020in (0.511) diameter wire
series resonanCe CHarT
Typical Series Resonant Frequency (Series Mounted)
25.0
Frequency (GHz)
10.0
R05/0201
R07/0402
R14/0603
1.0
R15/0805
0.5
1
0.1
200
100
10
Capacitance (pF)
rF CHaraCTerisTiCs - l-series
ESR vs Frequency: 0201/R05L
Q vs Frequency: 0201/R05L
1
10000
ESR (Ohms)
0.5 pF
1.2 pF
3.3 pF
8.2 pF
5.6 pF
22 pF
1000
Q
3.3 pF
8.2 pF
1.2 pF
5.6 pF
22 pF
0.1
0.5 pF
100
10
0.01
1
0
500
1000
1500
2000
2500
0
500
1000
1500
Frequency (MHz)
Frequency (MHz)
ESR vs Capacitance: 0201/R05L
2500
Q vs Capacitance: 0201/R05L
1
10000
ESR (Ohms)
2000
150-250MHz
1900-2000MHz
900-1000MHz
2100-2250MHz
1
10
50
10
0.5
100
0.01
0.5
2100-2250MHz
Q
1900-2000MHz
0.1
900-1000MHz
1000
150-250MHz
1
Capacitance (pF)
10
50
Capacitance (pF)
www.johansontechnology.com
13
s-series rF CHaraCTerisTiCs versus FreQuenCy
Equivalent Series Resistance: 0402/R07S
Q Factor: 0402/R07S
1
10000
ESR (Ohms)
0.1
1000
Q
100
0.5 pF
4.7 pF
10 pF
1.2 pF
8.2 pF
15 pF
10
0.01
0.5 pF
4.7 pF
10 pF
1.2 pF
8.2 pF
15 pF
1
0
500
1000
1500
2000
2500
0
500
1000
Frequency (MHz)
1500
2000
2500
Frequency (MHz)
Equivalent Series Resistance: 0603/R14S
Q Factor: 0603/R14S
10000
1
3.3 pF
10 pF
15 pF
33 pF
47 pF
1000
ESR (Ohms)
H
0.1
15 pF
10 pF
33 pF
Q
100
3.3 pF
47 pF
10
0.01
1
0
500
1000
1500
Frequency (MHz)
2000
2500
0
500
1000
1500
2000
2500
Frequency (MHz)
Equivalent Series Resistance: 0805/R15S
Q Factor: 0805/R15S
10000
1
4.7 pF
15 pF
47 pF
100 pF
220pF
4.7pF
15pF
100pF
220pF
47pF
Q
ESR (Ohms)
1000
0.1
100
10
1
0.01
0
500
1000
1500
2000
2500
0
500
1000
1500
Frequency (MHz)
Frequency (Mhz)
Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.
14
www.johansontechnology.com
2000
2500
s-series rF CHaraCTerisiTCs versus CapaCiTanCe
Q Factor: 0402/R07S
Equivalent Series Resistance: 0402/R07S
10000
1
0.1
150-250MHz
1900-2000MHz
900-1000MHz
2100-2250MHz
0.01
0.5
100
Q
10
150-250MHz
1900-2000MHz
2100-2250MHz
900-1000MHz
1
10
1
0.5
20
1
10
Capacitance (pF)
20
Capacitance (pF)
Equivalent Series Resistance: 0603/R14S
Q Factor: 0603/R14S
1
10000
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
1000
ESR (Ohms)
1000
ESR (Ohms)
0.1
100
Q
10
150-250MHz
900-1000MHz
0.01
1
10
Capacitance (pF)
1900-2000MHz
2100-2250MHz
1
50
1
Equivalent Series Resistance: 0805/R15S
10
Capacitance (pF)
50
Q Factor: 0805/R15S
1
10000
150-250MHz
900-1000MHz
1900-2000MHz
150-250MHz
1900-2000MHz
2100-2250MHz
900-1000MHz
2100-2250MHz
ESR (Ohms)
ESR (Ohms)
1000
0.1
100
10
1
0.01
1
10
100
1000
1
10
Capacitance (pF)
100
1000
Capacitance (pF)
Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.
www.johansontechnology.com
15
s42e series rF CHaraCTerisTiCs versus FreQuenCy
Equivalent Series Resistance: 1111/S42E
Q Factor: 1111/S42E
10000
1
1.5pF
3.9pF
9.1pF
15pF
27pF
82pF
Q
ESR (Ohms)
1000
100
0.1
10
1.5pF
3.9pF
9.1pF
15pF
27pF
82pF
0.01
0
1
200
400
600
800
1000
1200
1400
0
200
400
600
Frequency (MHz)
800
1000
1200
1400
Frequency (MHz)
s42e series rF CHaraCTerisTiCs versus CapaCiTanCe
S42E Equivalent Series Resistance vs Capacitance, Typical
S42E Q vs. Capacitance, Typical
10000
1
140 - 250 MHz
350 - 750 MHz
600 - 1200 MHz
Q
ESR (Ohms)
1000
0.1
100
10
140 - 250 MHz
1
10
100
1000
1
Capacitance (pF)
S42E SRF (Series Mount), Typical
JTI S42E SRF
1
0.1
1
10
10
100
Capacitance (pF)
10
F re q u e n c y (G H z )
600 - 1200 MHz
1
0.01
100
1000
Capacitance (pF)
16
350 - 750 MHz
www.johansontechnology.com
1000
JTi s48e grapHiCal daTa
SRF (Shunt Mount), S48E, Typical (Preliminary)
Current Rating vs. Capacitance, S48E, Typical (Preliminary)
10
100
Current Rating (amps)
Frequency (GHz)
JTI S48E SRF
1
10
1
30 MHz
64 MHz
128 MHz
0.1
0.1
1
10
100
1
1000
10
Capacitance (pF)
100
1000
10000
Capacitance (pF)
Solid traces show voltage limited current (Vrms)
As measured on a 8720C VNA, using a ShuntThrough fixture, and using the S11 magnitude dip
to determine the SRF
Dotted traces show power dissipation limited
current (Based on 4 Watts Power Dissipation, and
125 degrees C case temp.)
S48E Q vs. Capacitance, Typical (Preliminary)
S48E ESR vs. Capacitance, Typical (Preliminary)
0.100
100000
ESR (ohms)
Q
10000
1000
100
ESR vs. C @ 64 MHz
Q vs C @ 64 MHz
Q vs C @ 128 MHz
ESR vs. C @ 128 MHz
10
0.010
1
10
100
1000
Capacitance (pF)
As measured on a 4287A LCR meter, using a
16092A fixture
10000
1
100
10
1000
10000
Capacitance (pF)
As measured on a 4287A LCR meter, using a
16092A fixture
www.johansontechnology.com
17
JTi s48e grapHiCal daTa
S48E (EIA 2525) 12pF* (ESR vs. Freq)
0.060
ESR (Ohms)
0.055
0.050
0.045
0.040
S48E
0.035
0
200
400
600
800
Frequency (MHz)
*Actual data from Boonton 34A resonant line.
JTi s58e grapHiCal daTa
S58E (EIA 3838) 47pF* (ESR vs. Freq)
0.045
ESR (Ohms)
0.040
0.035
0.030
0.025
S58
0.020
0
100
200
300
400
500
600
Frequency (MHz)
*Actual data from Boonton 34A resonant line.
18
www.johansontechnology.com
700
rF CeraMiC CHip induCTors
High frequency multi-layer chip inductors feature a monolithic body
made of low loss ceramic and high conductivity metal electrodes to
achieve optimal high frequency performance.
These RF chip inductors are compact in size and feature lead-free tin
plated nickel barrier terminations and tape and reel packaging which
makes them ideal for small size/high volume wireless applications.
APPLICATIONS & FEATURES
• CELL/PCS Modules
• Wireless LAN
• Broadband Components
• RFID
• RF Tranceivers
• RoHS Compliant (Standard, “V” Code)
Polarity Half-Marked Inductors (0201 only)
• Sn/Pb Terminations Optional (“T” Code)
produCT range suMMary
EIA SIZE (mm)
SIZE CODE
0201 (0603)
0402 (1005)
0603 (1608)
L-05
L-07
L-14
L RANGE
Q FACTOR (Min.)
0.6 - 39 nH
1.0 - 120 nH
1.0 - 220 nH
SRF (Typ.)
4 (100 MHz)
8 (100 MHz)
12 (100 MHz)
TEMPERATURE
>21 GHz (1.0 nH)
>21 GHz (1.0 nH)
>23 GHz (1.0 nH)
W
MeCHaniCal CHaraCTerisTiCs
0402 (1005)
0201 (0603)
Inches
Length
Width
Thickness
End Band
mm
Inches
L
0603 (1608)
mm
Inches
E/B
mm
.024 ±.001”
(0.6 ±0.03)
.039 ±.004”
(1.00 ±.10)
.063 ±.006”
(1.60 ±.15)
.012 ±.001”
(0.3 ±0.03)
.020 ±.004”
(0.50 ±.10)
.031 ±.006”
(0.80 ±.15)
.012 ±.001”
(0.3 ±0.03)
.020 ±.004”
(0.50 ±.10)
.031 ±.006”
(0.80 ±.15)
(0.15 ±0.05)
.009 ±.004”
(0.23 ±.10)
.012 ±.008”
(0.30 ±.20)
.006 ±.002”
-40°C to +100°C
-40°C to +100°C
-40°C to +100°C
T
W
L
E/B
How To order
L-
07
T
C
10N
DEVICE
SIZE
TYPE
VALUE
Inductor
05 = 0201
07 = 0402
14 = 0603
B = Polarity
Half-Marked
(all 0201)
C = 0402 and
0603 (see
“Marking”)
See Table
J
TOLERANCE
C = ± 0.2 nH
S= ± 0.3 nH
J = ± 5%
K= ± 10%
≤ 1.0 nH
1.0 to 5.6 nH
6.8 nH and above
3.3 nH and above
V
6
TERMINATION
V = Ni/Sn
T = Ni / SnPb
T
MARKING
4 = No Marking
(all 0603)
6 = Orientation
Mark
(all 0201 and 0402*)
Part number written: L-07C10NJV6T
Orientation Full Marking (all 0402)
PACKAGING
Tape and Reel
Size
0201
0402
0603
Code
T
T
T
Tape
Paper
Paper
Paper
Reel
7”
7”
7”
Qty
15,000
10,000
4,000
Bulk (Loose Pcs.)
Size
All
Code
S
*Please note that all 0402 inductors (L-07C) have orientation full marking only.
www.johansontechnology.com
19
rF CHip induCTor seleCTion CHarT
EIA Size
Inductor
Value
Inductance
nH
0.6
0.7
0.8
0.9
1.0
1.2
1.3
1.5
1.8
1.9
2.0
2.2
2.3
2.4
2.5
2.7
3.0
3.3
3.6
3.7
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
10
12
13
15
18
22
23
27
33
39
43
47
56
68
82
100
120
150
180
220
270
330
390
420
560
680
Code
0N6
0N7
0N8
0N9
1N0
1N2
1N3
1N5
1N8
1N9
2N0
2N2
2N3
2N4
2N5
2N7
3N0
3N3
3N6
3N7
3N9
4N3
4N7
5N1
5N6
6N2
6N8
7N5
8N2
10N
12N
13N
15N
18N
22N
23N
27N
33N
39N
43N
47N
56N
68N
82N
R10
R12
R15
R18
R22
R27
R33
R39
R42
R56
R68
0201
(L-05)
0402
(L-07)
0603
(L-14)
300 mA
300 mA (S only)
300 mA (S only)
300 mA (S only)
300 mA (S only)
300 mA
300 mA
300 mA
300 mA
300 mA (S only)
300 mA
Tolerance
C
S
K
S
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
250 mA
250 mA
250 mA
250 mA
250 mA
250 mA
200 mA
200 mA
J
200 mA
200 mA
200 mA
K
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
250 mA
250 mA
250 mA
250 mA
250 mA
250 mA
250 mA
200 mA
200 mA
200 mA
200 mA
200 mA
150 mA
150 mA
150 mA
150 mA
100 mA
100 mA
100 mA
100 mA
300 mA
Consult factory for Non-Standard values. C tolerance are non-standard terms
See web page for Chip Inductor Product Detail Summary by part number
20
300 mA
www.johansontechnology.com
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
300 mA
rF CHaraCTerisTiCs CHaraCTerisTiCs (TypiCal)
INDUCTANCE VS FREQUENCY: SIZE 0201
Q VS FREQUENCY: SIZE 0201
60
11000
1N5
40
100
Q
Inductance (nH)
3N3
33N
6N8
22N
10
10N
10N
20
22N
6N8
3N3
33N
1N5
0
0.01
1
0.01
0.1
1
10
0.1
Frequency (GHz)
INDUCTANCE VS FREQUENCY: SIZE 0402
60
500
10
Q VS FREQUENCY: SIZE 0402
100
1N5
1N 5
80
40
100
3N3
Q
47N
27N
15N
10
20
6N 8
22N
1.0
0.1
0
0.01
10
1
10
0.1 Frequency (GHz) 1.0
Frequency
Frequency
(GHz) (GHz)
Frequency
(GHz)(GHz)
Frequency
INDUCTANCE VS FREQUENCY: SIZE 0603
6N 8
27N
47N
0
0.01
0.1
3N 3
15N
33N
20
1N 5
0.01
6N8
10N
40
3N 3
1.0
60
QQ
Inductance
(nH) (nH)
Inductance
1
Frequency (GHz)
10
Q VS FREQUENCY: SIZE 0603
100
1000
100
R 10
56N
60
27N
10
12N
56N
27N
20
2N 2
0.01
12N
40
4N 7
1.0
4N 7
Q
Q
Inductance
Inductance
(nH) (nH)
2N 2
80
R 10
0.1
1.0
10
0
0.01
Frequency
(GHz)(GHz)
Frequency
0.1
1.0
10
Frequency
Frequency
(GHz)(GHz)
www.johansontechnology.com
21
rF wirewound CHip induCTors
These high frequency High-Q chip inductors feature a
monolithic body made of low loss ceramic wound with wire to
achieve optimal high frequency performance.
These RF chip inductors are compact in size and are provided on
tape and reel packaging which makes them ideal for high volume RF
applications. They feature a nickel barrier with a top plating of gold
for the ceramic core types (all 0402, all 0603, and most 0805 types),
and with a top plating of 100% tin for the ferrite core types (0805
size, 470 nH and higher).
Most inductance values between those
listed are available on request.
APPLICATIONS
• CELL/PCS Modules
• Wireless LAN
• Broadband Components
• RFID
• RF Tranceivers
• Cordless Phone
• Cable Modem
• Computer Peripherals
• Bluetooth
• ASDL
produCT range suMMary
EIA SIZE (mm)
SIZE CODE
0402 (1005)
0603 (1608)
0805 (2012)
L-07
L-14
L-15
L RANGE
1.0 - 120 nH
2.0 - 470 nH
2.2 - 10,000 nH
Q FACTOR (Typ.)
SRF (Typ.)
TEMPERATURE
55 (900 MHz)
60 (900 MHz)
60 (500 MHz)
>11 GHz (1.0 nH)
>13 GHz (2.0 nH)
>11 GHz (2.2 nH)
-40°C to + 125°C
-40°C to + 125°C
-40°C to + 125°C*
*-40 deg. C to +85 deg. C for ferrite core types
MeCHaniCal CHaraCTerisTiCs
0402 (1005)
T
W
Inches
S
Length
Width
Thickness
End Band
L
mm
0603 (1608)
0805 (2012)
Inches
Inches
mm
mm
.039 ±.004”
(1.00 ±.10)
.063 ±.008”
(1.60 ±.20)
.079 ±.008”
(2.00 ±.20)
.022 ±.004”
(0.55 ±.10)
.041 ±.008”
(1.05 ±.20)
.049 ±.008”
(1.25 ±.20)
.020 ±.004”
(0.50 ±.10)
.041 ±.008”
(1.05 ±.20)
.047 ±.008”
(1.20 ±.20)
.008 ±.004”
(0.20 ±.10)
.014 ±.004”
(0.35 ±.10)
.016 ±.004”
(0.40 ±.10)
How To order
L-
07
DEVICE
Inductor
SIZE
07 = 0402
14 = 0603
15 = 0805
W
4N3
TYPE
VALUE
See Table
W = Wirewound on
Ceramic Core
F = Wirewound on
Ferrite Core
V
S
TOLERANCE*
C = ± 0.2 nH
S= ± 0.3 nH
G = ± 2%
J = ± 5%
K = ± 10%
TERMINATION
V = Ni / Au for “W”types,
4
PACKAGING
MARKING
4 = No Marking
and V = Ni / 100% Sn for
“F” types
Example Part Number:
L-07W4N3SV4T is: 0402 Wirewound, 4.3 nanohenry, +/- 0.3 nH tolerance, Ni / Au termination,
No Marking, Paper tape on a 7” reel.
22
T
www.johansontechnology.com
Tape and Reel
Size
0402
0603
0805
Code Tape
T
Paper
E Embossed
E Embossed
Bulk (Loose Pcs.)
Size
All
Code
S
Reel
7”
7”
7”
Qty
10,000
3,000
2,000
rF wirewound CHip induCTor seleCTion CHarT
Inductance
nH
Code
1.0
1N0
1.2
1N2
1.6
1N6
1.8
1N8
1.9
1N9
2.0
2N0
2.2
2N2
2.4
2N4
2.6
2N6
2.7
2N7
3.3
3N3
3.6
3N6
3.9
3N9
4.3
4N3
4.7
4N7
5.1
5N1
5.6
5N6
6.2
6N2
6.8
6N8
7.5
7N5
8.2
8N2
8.7
8N7
9.0
9N0
9.5
9N5
10
10N
11
11N
12
12N
13
13N
15
15N
16
16N
18
18N
19
19N
20
20N
22
22N
23
23N
24
24N
27
27N
30
30N
33
33N
36
36N
39
39N
40
40N
43
43N
47
47N
51
51N
56
56N
68
68N
72
72N
82
82N
100
R10
110
R11
120
R12
150
R15
180
R18
220
R22
270
R27
Tolerance
Rated
Current
C, S
C, S
1360 mA
1300 mA
C, S
C, S
C, S
C, S
C, S
C, S
C, S
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
J, K
J, K
J, K
1040 mA
1040 mA
1040 mA
960 mA
790 mA
640 mA
640 mA
840 mA
840 mA
840 mA
700 mA
640 mA
800 mA
760 mA
760 mA
680 mA
680 mA
680 mA
480 mA
680 mA
680 mA
480 mA
640 mA
640 mA
560 mA
560 mA
560 mA
420 mA
480 mA
420 mA
400 mA
400 mA
400 mA
400 mA
400 mA
400 mA
320 mA
320 mA
320 mA
100 mA
100 mA
100 mA
100 mA
100 mA
J, K
J, K
J, K
J, K
100 mA
100 mA
100 mA
100 mA
0603
(L-14)
Tolerance
Rated
Current
C, S
C, S
700 mA
700 mA
C, S
700 mA
0805
(L-15)
Tolerance
Rated
Current
C, S
800 mA
C, S
C, S
800 mA
800 mA
C, S
600 mA
C, S
600 mA
C, J, K
600 mA
C, G J, K
600 mA
600 mA
600 mA
C, S
C, S
C, S
C, S
C, S
C, J, K
C, J, K
700 mA
700 mA
700 mA
700 mA
700 mA
700 mA
700 mA
C, J, K
C, J, K
C, J, K
C, J, K
700 mA
700 mA
700 mA
700 mA
C, J, K
G, J, K
G, J, K
G, J, K
700 mA
700 mA
700 mA
700 mA
G, J, K
G, J, K
G, J, K
700 mA
700 mA
700 mA
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
700 mA
700 mA
700 mA
700 mA
600 mA
700 mA
600 mA
G, J, K
600 mA
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
700 mA
600 mA
600 mA
600 mA
600 mA
400 mA
400 mA
400 mA
J, K
G, J, K
J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
300 mA
280 mA
240 mA
200 mA
170 mA
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
J, K
C, G, J, K
G, J, K 600 mA
G, J, K
J, K
G, J, K
G, J, K
G, J, K
Core
Type
600 mA
600 mA
600 mA
600 mA
600 mA
G, J, K 600 mA
G, J, K 600 mA
EIA Size
Inductor
Value
Inductance
nH
Code
330
R33
390
R39
470
R47
560
R56
680
R68
820
R82
1000
1R0
1200
1R2
1500
1R5
1800
1R8
2200
2R2
2700
2R7
3300
3R3
3900
3R9
4700
4R7
5600
5R6
6800
6R8
8200
8R2
10000 10R
0402
(L-07)
Tolerance
Rated
Current
0603
(L-14)
0805
(L-15)
Core
Type
Tolerance
Rated
Current
Tolerance
Rated
Current
J, K
J, K
J, K
150 mA
100 mA
100 mA
G, J, K
G, J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
300 mA
Ceramic
210 mA
500 mA
450 mA
400 mA
300 mA
180 mA
150 mA
130 mA
120 mA
110 mA
100 mA
210 mA
200 mA
180 mA
160 mA
130 mA
120 mA
80 mA
FERRITE CORE (“F” Type)
Inductor
Value
0402
(L-07)
Consult factory for Non-Standard values.
CERAMIC CORE (“VV” Type)
EIA Size
J, K 600 mA
G, J, K 600 mA
G, J, K 500 mA
J, K 600 mA
G, J, K 500 mA
600 mA
500 mA
600 mA
500 mA
500 mA
G, J, K 500 mA
G, J, K 500 mA
500 mA
400 mA
400 mA
400 mA
350 mA
See web page for WireWound Inductor Product Detail
Summary by part number
www.johansontechnology.com
23
rF CHaraCTerisTiCs CHaraCTerisTiCs (TypiCal)
Q vs Frequency for 0402 Size
180
2.2 nH
5.6 nH
15 nH
160
3.3 nH
8.2 nH
36 nH
120
Q
2.2 nH
5.6 nH
15 nH
50
Inductance (nH)
140
L vs Frequency for 0402 Size
60
100
80
60
3.3 nH
8.2 nH
36 nH
40
30
20
40
10
20
0
100
1000
0
10000
100
Frequency (MHz)
2.0 nH
22 nH
180 nH
100
L vs Frequency for 0603 Size
400
10 nH
100 nH
2.0nH
350
10 nH
300
Inductance (nH)
80
60
40
22 nH
250
100 nH
200
180 nH
150
100
20
50
0
0
100
1000
10000
100
Frequency (MHz)
Q vs Frequency for 0805 Size
1400
70
2.7nH
27.0nH
100nH
270nH
10000
470nH
680nH
60
50
40
30
L vs Frequency for 0805 Size
1200
Inductance (nH)
80
1000
Frequency (MHz)
90
Q
Q
10000
Frequency (MHz)
Q vs Frequency for 0603 Size
120
1000
1000
2.7nH
27.0nH
100nH
270nH
470nH
680nH
800
600
400
20
200
10
0
100
24
1000
Frequency (MHz)
10000
0
100
1000
Frequency (MHz)
www.johansontechnology.com
10000
0402 induCTanCe range / eleCTriCal CHaraCTerisTiCs
Part Number
(Standard Tol.)
Inductance
@ 250MHz
Availiable Tolerances
@ 250MHz
Q (min.)
@ 250MHz
Q (Typ.)
@ 900MHz
Q (Typ.)
@ 1.8GHz
SRF
(min.)
DC Resistance
(max.)
Rated Current
(max.)
L-07W1N0SV4T
L-07W1N2SV4T
L-07W1N8SV4T
L-07W1N9SV4T
L-07W2N0SV4T
L-07W2N2SV4T
L-07W2N4SV4T
L-07W2N7SV4T
L-07W3N3JV4T
L-07W3N6JV4T
1.0 nH
1.2 nH
1.8 nH
1.9 nH
2.0 nH
2.2 nH
2.4 nH
2.7 nH
3.3 nH
3.6 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
13
13
16
16
16
18
15
16
19
19
49
49
50
50
51
52
52
50
53
55
60
60
60
60
62
65
65
65
72
72
6.0 GHz
6.0 GHz
6.0 GHz
6.0 GHz
6.0 GHz
6.0 GHz
6.0 GHz
6.0 GHz
6.0 GHz
6.0 GHz
0.045 Ω
0.060 Ω
0.070 Ω
0.070 Ω
0.070 Ω
0.070 Ω
0.068 Ω
0.120 Ω
0.066 Ω
0.066 Ω
1360 mA
1300 mA
1040 mA
1040 mA
1040 mA
960 mA
790 mA
640 mA
840 mA
840 mA
L-07W3N9JV4T
3.9 nH
±0.2 nH, ±5%, ±10%
19
60
76
5.8 GHz
0.066 Ω
840 mA
L-07W4N3JV4T
4.3 nH
±0.2 nH, ±5%, ±10%
18
55
82
6.0 GHz
0.091 Ω
700 mA
L-07W4N7JV4T
4.7 nH
±0.2 nH, ±5%, ±10%
15
55
82
4.8 GHz
0.130 Ω
640 mA
L-07W5N1JV4T
L-07W5N6JV4T
L-07W6N2JV4T
L-07W6N8JV4T
L-07W7N5JV4T
L-07W8N2JV4T
5.1 nH
5.6 nH
6.2 nH
6.8 nH
7.5 nH
8.2 nH
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
20
20
20
20
22
22
58
61
57
58
59
60
83
89
80
80
90
87
5.8 GHz
5.8 GHz
5.8 GHz
4.8 GHz
5.8 GHz
4.4 GHz
0.083 Ω
0.083 Ω
0.083 Ω
0.083 Ω
0.104 Ω
0.104 Ω
800 mA
760 mA
760 mA
680 mA
680 mA
680 mA
L-07W8N7JV4T
8.7 nH
±0.2 nH, ±5%, ±10%
18
60
83
4.1 GHz
0.200 Ω
480 mA
L-07W9N0JV4T
9.0 nH
±0.2 nH, ±5%, ±10%
22
60
83
4.2 GHz
0.104 Ω
680 mA
L-07W9N5JV4T
L-07W10NJV4T
L-07W11NJV4T
L-07W12NJV4T
L-07W13NJV4T
9.5 nH
10.0 nH
11.0 nH
12.0 nH
13.0 nH
±0.2 nH, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
18
21
24
24
24
55
56
61
58
60
76
76
86
77
77
4.0 GHz
3.9 GHz
3.7 GHz
3.6 GHz
3.5 GHz
0.200 Ω
0.195 Ω
0.120 Ω
0.120 Ω
0.210 Ω
680 mA
480 mA
640 mA
640 mA
560 mA
L-07W15NJV4T
15.0 nH
±2%, ±5%, ±10%
24
61
86
3.3 GHz
0.172 Ω
560 mA
L-07W16NJV4T
L-07W18NJV4T
L-07W19NJV4T
L-07W20NJV4T
16.0 nH
18.0 nH
19.0 nH
20.0 nH
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
24
24
24
24
58
58
58
54
77
77
77
74
3.1 GHz
3.1 GHz
3.0 GHz
3.0 GHz
0.220 Ω
0.230 Ω
0.202 Ω
0.250 Ω
560 mA
420 mA
480 mA
420 mA
L-07W22NJV4T
22.0 nH
±2%, ±5%, ±10%
24
54
73
2.7 GHz
0.300 Ω
400 mA
L-07W23NJV4T
L-07W24NJV4T
L-07W27NJV4T
L-07W30NJV4T
L-07W33NJV4T
L-07W36NJV4T
L-07W39NJV4T
L-07W40NJV4T
L-07W43NJV4T
L-07W47NJV4T
L-07W51NJV4T
L-07W56NJV4T
L-07W68NJV4T
23.0 nH
24.0 nH
27.0 nH
30.0 nH
33.0 nH
36.0 nH
39.0 nH
40.0 nH
43.0 nH
47.0 nH
51.0 nH
56.0 nH
68.0 nH
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
+/-5%, +/-10%
+/-5%, +/-10%
+/-5%, +/-10%
24
24
24
24
24
24
24
24
24
22@200MHz
22@200MHz
22@200MHz
22@200MHz
55
54
55
52
52
52
51
51
50
50
49
49
42
73
74
75
64
64
64
48
48
46
46
N/A
N/A
N/A
2.7 GHz
2.7 GHz
2.5 GHz
2.3 GHz
2.3 GHz
2.3 GHz
2.1 GHz
2.3 GHz
2.0 GHz
2.1 GHz
1.7 GHz
1.7 GHz
1.6 GHz
0.214 Ω
0.300 Ω
0.298 Ω
0.300 Ω
0.350 Ω
0.403 Ω
0.550 Ω
0.438 Ω
0.810 Ω
0.830 Ω
0.820 Ω
0.970 Ω
1.120 Ω
400 mA
400 mA
400 mA
400 mA
400 mA
320 mA
320 mA
320 mA
100 mA
100 mA
100 mA
100 mA
100 mA
www.johansontechnology.com
25
0402 induCTanCe range / eleCTriCal CHaraCTerisTiCs
Part Number
(Standard Tol.)
Inductance
@ 250MHz
Availiable Tolerances
@ 250MHz
Q (min.)
@ 250MHz
Q (Typ.)
@ 900MHz
Q (Typ.)
@ 1.8GHz
SRF
(min.)
DC Resistance
(max.)
Rated Current
(max.)
L-07W82NJV4T
L-07WR10JV4T
L-07WR11JV4T
L-07WR12JV4T
82.0 nH
100.0 nH
110.0 nH
120.0 nH
+/-5%, +/-10%
+/-5%, +/-10%
+/-5%, +/-10%
+/-5%, +/-10%
16@150 MHz
16@150 MHz
14@150 MHz
14@150 MHz
39
36
35
35
N/A
N/A
N/A
N/A
1.5 GHz
1.3 GHz
1.2 GHz
1.1 GHz
1.250 Ω
2.520 Ω
2.660 Ω
2.660 Ω
100 mA
100 mA
100 mA
100 mA
0603 induCTanCe range / eleCTriCal CHaraCTerisTiCs
26
Part Number
(Standard Tol.)
Inductance
@ L/Q Freq.
L/Q Test
Freq.
Availiable Tolerances
@ L/Q Freq.
Q (min.)
@ L/Q Freq.
SRF (min.)
DC Resistance
(max.)
Rated Current
(max.)
L-14W1N6SV4E
L-14W1N8SV4E
L-14W2N0SV4E
L-14W3N3SV4E
L-14W3N6SV4E
L-14W3N9SV4E
L-14W4N3SV4E
L-14W4N7SV4E
L-14W5N1JV4E
L-14W5N6JV4E
1.6 nH
1.8 nH
2.0 nH
3.3 nH
3.6 nH
3.9 nH
4.3 nH
4.7 nH
5.1 nH
5.6 nH
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
14
16
16
17
20
22
22
20
18
16
7.0 GHz
6.9 GHz
6.9 GHz
6.1 GHz
6.0 GHz
5.9 GHz
5.8 GHz
5.8 GHz
5.4 GHz
5.0 GHz
0.080 Ω
0.080 Ω
0.080 Ω
0.080 Ω
0.080 Ω
0.080 Ω
0.060 Ω
0.110 Ω
0.110 Ω
0.110 Ω
700 mA
700 mA
700 mA
700 mA
700 mA
700 mA
700 mA
700 mA
700 mA
700 mA
L-14W6N8JV4E
6.8 nH
250 MHz
±0.2 nH, ±5%, ±10%
30
4.6 GHz
0.110 Ω
700 mA
L-14W7R5JV4E
7.5 nH
250 MHz
±0.2 nH, ±5%, ±10%
30
4.7 GHz
0.110 Ω
700 mA
L-14W8N2JV4E
8.2 nH
250 MHz
±0.2 nH, ±5%, ±10%
30
4.8 GHz
0.100 Ω
700 mA
L-14W8N7JV4E
L-14W10NJV4E
L-14W11NJV4E
L-14W12NJV4E
L-14W15NJV4E
L-14W18NJV4E
8.7 nH
10.0 nH
11.0 nH
12.0 nH
15.0 nH
18.0 nH
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
±0.2 nH, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
30
31
33
35
35
38
4.6 GHz
4.0 GHz
4.0 GHz
4.0 GHz
3.1 GHz
3.0 GHz
0.120 Ω
0.130 Ω
0.086 Ω
0.130 Ω
0.170 Ω
0.170 Ω
700 mA
700 mA
700 mA
700 mA
700 mA
700 mA
L-14W22NJV4E
22.0 nH
250 MHz
±2%, ±5%, ±10%
38
3.0 GHz
0.220 Ω
700 mA
L-14W27NJV4E
27.0 nH
250 MHz
±2%, ±5%, ±10%
40
2.8 GHz
0.220 Ω
600 mA
L-14W33NJV4E
L-14W39NJV4E
L-14W47NJV4E
L-14W51NJV4E
L-14W56NJV4E
33.0 nH
39.0 nH
47.0 nH
51.0 nH
56.0 nH
250 MHz
250 MHz
200 MHz
200 MHz
200 MHz
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
43
43
40
40
40
2.3 GHz
2.2 GHz
2.0 GHz
1.9 GHz
1.9 GHz
0.220 Ω
0.250 Ω
0.280 Ω
0.300 Ω
0.310 Ω
600 mA
600 mA
600 mA
600 mA
600 mA
L-14W68NJV4E
68.0 nH
200 MHz
±2%, ±5%, ±10%
40
1.7 GHz
0.340 Ω
600 mA
L-14W72NJV4E
L-14W82NJV4E
L-14WR10JV4E
L-14WR12JV4E
72.0 nH
82.0 nH
100.0 nH
120.0 nH
150 MHz
150 MHz
150 MHz
150 MHz
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
35
35
35
35
1.7 GHz
1.7 GHz
1.4 GHz
1.3 GHz
0.490 Ω
0.540 Ω
0.630 Ω
0.650 Ω
400 mA
400 mA
400 mA
300 mA
L-14WR15JV4E
150.0 nH
150 MHz
±2%, ±5%, ±10%
35
1.0 GHz
0.920 Ω
280 mA
L-14WR18JV4E
L-14WR22JV4E
L-14WR27JV4E
L-14WR33JV4E
L-14WR39JV4E
L-14WR47JV4E
180.0 nH
220.0 nH
270.0 nH
330.0 nH
390.0 nH
470.0 nH
100 MHz
100 MHz
100 MHz
100 MHz
100 MHz
100 MHz
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
30
30
30
25
24
23
1.0 GHz
1.0 GHz
1.0 GHz
900 MHz
750 MHz
700 MHz
1.25 Ω
1.70 Ω
1.80 Ω
3.60 Ω
5.30 Ω
5.60 Ω
240 mA
200 mA
170 mA
150 mA
100 mA
100 mA
www.johansontechnology.com
0805 induCTanCe range / eleCTriCal CHaraCTerisTiCs
Part Number
(Standard Tol.)
Inductance
@ L Test
Freq.
L-15W2N2SV4E
L-15W2N7SV4E
L-15W3N3SV4E
L-15W3N9SV4E
L-15W4N7SV4E
L-15W5N6SV4E
L-15W6N8SV4E
L-15W8N2SV4E
L-15W10NJV4E
L-15W12NJV4E
L Test
Freq.
Availiable Tolerances
@ L Test Freq.
Q (min.)
@ Q Test Freq.
Q Test
Freq.
SRF (min.)
DC Resistance
(max.)
Rated Current
(max.)
2.2 nH
2.7 nH
3.3 nH
3.9 nH
4.7 nH
5.6 nH
6.8 nH
8.2 nH
10.0 nH
12.0 nH
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±0.3 nH
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
±0.2 nH, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
50
30
60
60
60
60
60
60
60
60
1000 MHz
1000 MHz
1000 MHz
1000 MHz
1000 MHz
1000 MHz
1000 MHz
1000 MHz
500 MHz
500 MHz
>6000 MHz
>6000 MHz
>6000 MHz
>6000 MHz
5800 MHz
5800 MHz
5500 MHz
5500 MHzz
4800 MHz
4100 MHz
0.06 Ω
0.08 Ω
0.08 Ω
0.06 Ω
0.06 Ω
0.08 Ω
0.06 Ω
0.06 Ω
0.08 Ω
0.08 Ω
800 mA
800 mA
800 mA
600 mA
600 mA
600 mA
600 mA
600 mA
600 mA
600 mA
L-15W15NJV4E
15.0 nH
250 MHz
±2%, ±5%, ±10%
60
500 MHz
3600 MHz
0.08 Ω
600 mA
L-15W16NJV4E
16.0 nH
250 MHz
±2%, ±5%, ±10%
60
500 MHz
3500 MHz
0.08 Ω
600 mA
L-15W18NJV4E
18.0 nH
250 MHz
±2%, ±5%, ±10%
60
500 MHz
3400 MHz
0.08 Ω
600 mA
L-15W20NJV4E
L-15W22NJV4E
L-15W27NJV4E
L-15W33NJV4E
L-15W39NJV4E
L-15W47NJV4E
20.0 nH
22.0 nH
27.0 nH
33.0 nH
39.0 nH
47.0 nH
250 MHz
250 MHz
250 MHz
250 MHz
250 MHz
200 MHz
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
60
60
60
60
60
60
500 MHz
500 MHz
500 MHz
500 MHz
500 MHz
500 MHz
3400 MHz
3300 MHz
2600 MHz
2400 MHz
2100 MHz
1700 MHz
0.08 Ω
0.10 Ω
0.12 Ω
0.15 Ω
0.18 Ω
0.15 Ω
600 mA
600 mA
600 mA
500 mA
500 mA
500 mA
L-15W56NJV4E
56.0 nH
200 MHz
±2%, ±5%, ±10%
60
500 MHz
1600 MHz
0.25 Ω
500 mA
L-15W68NJV4E
68.0 nH
150 MHz
±2%, ±5%, ±10%
60
500 MHz
1450 MHz
0.27 Ω
500 mA
L-15W82NJV4E
L-15WR10JV4E
L-15WR12JV4E
L-15WR15JV4E
L-15WR18JV4E
82.0 nH
100 nH
120 nH
150 nH
180 nH
150 MHz
100 MHz
100 MHz
100 MHz
100 MHz
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
60
57
50
50
50
500 MHz
250 MHz
250 MHz
250 MHz
250 MHz
1350 MHz
1200 MHz
1100 MHz
950 MHz
900 MHz
0.32 Ω
0.43 Ω
0.48 Ω
0.56 Ω
0.78 Ω
500 mA
500 mA
500 mA
400 mA
400 mA
L-15WR22JV4E
220 nH
100 MHz
±2%, ±5%, ±10%
50
250 MHz
860 MHz
1.00 Ω
400 mA
L-15WR27JV4E
L-15WR33JV4E
L-15WR39JV4E
L-15FR47JV4E
270 nH
330 nH
390 nH
470 nH
100 MHz
25 MHz
25 MHz
25 MHz
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
±5%, ±10%
45
45
45
45
250 MHz
250 MHz
250 MHz
100 MHz
850 MHz
800 MHz
780 MHz
375 MHz
1.46 Ω
1.65 Ω
2.20 Ω
0.95 Ω
350 mA
300 mA
210 mA
500 mA
L-15FR56JV4E
560 nH
25 MHz
±5%, ±10%
45
100 MHz
340 MHz
1.10 Ω
450 mA
L-15FR68JV4E
L-15FR82JV4E
L-15F1R0JV4E
L-15F1R2JV4E
L-15F1R5JV4E
L-15F1R8JV4E
L-15F2R2JV4E
L-15F2R7JV4E
L-15F3R3JV4E
L-15F3R9JV4E
L-15F4R7JV4E
L-15F5R6JV4E
L-15F6R8JV4E
L-15F8R2JV4E
L-15F10RJV4E
680 nH
820 nH
1000 nH
1200 nH
1500 nH
1800 nH
2200 nH
2700 nH
3300 nH
3900 nH
4700 nH
5600 nH
6800 nH
8200 nH
10000 nH
25 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
±5%, ±10%
35
35
35
15
15
15
15
15
15
15
15
15
15
15
10
100 MHz
100 MHz
50 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
8 MHz
188 MHz
210 MHz
200 MHz
200 MHz
200 MHz
120 MHz
110 MHz
100 MHz
70 MHz
60 MHz
50 MHz
45 MHz
45 MHz
40 MHz
40 MHz
1.20 Ω
1.50 Ω
2.13 Ω
2.38 Ω
2.90 Ω
3.00 Ω
3.10 Ω
3.50 Ω
2.30 Ω
2.50 Ω
2.80 Ω
3.00 Ω
3.20 Ω
3.50 Ω
5.00 Ω
400 mA
300 mA
180 mA
150 mA
130 mA
120 mA
110 mA
100 mA
210 mA
200 mA
180 mA
160 mA
130 mA
120 mA
80 mA
www.johansontechnology.com
27
inTegraTed passive CoMponenTs
Johanson Technology has developed a line of small,
highly reliable RF ceramic components manufactured with
a proprietary LTCC (low temperature co-fired ceramic)
process. These components operate over several bands
from 900MHz to 6 GHz covering Cellular, DECT, WLAN,
Bluetooth, 802.11 (a,b and g) and GPS applications.
In addition to the array of listed components we can
support custom solutions for high volume applications with
design flexibility and short development times. Contact us
today with your specific technical requirements.
Key FeaTures
•
•
•
•
•
•
•
•
Custom Solutions
LTCC Based Designs
Low Insertion Loss
Miniature Size / Low Profile
Temperature Stable
Surface Mount
RoHS Compliant, Standard, Use No Suffix
Tin / Lead Term. Option, Add “/Pb” Suffix
SUPPORTED APPLICATION BANDS
• Wireless LAN, Bluetooth, Home RF
• 2.4 GHz & 5.5 GHz ISM Band
• GPS
• GSM/EDGE/GPRS/DCS/PCS/WCDMA
• Zigbee
• UNII
• WiMAX 802.16 d/e
• MIMO
• UWB
BP FILTER
BALUN
BP FILTER
BP FILTER
DEMOD.
ANTENNA
LNA
VCO
DIVIDER
DIPLEXER
PA
COUPLER
28
MOD.
LP FILTER
BALUN
www.johansontechnology.com
CeraMiC CHip anTennas
Part
Number
Frequency
(MHz)
Peak Gain
Ave. Gain
Return Loss
(min)
Case Size
0433AT62A0020
0783AT43A0008
0868AT43A0020
0920AT50A080
0915AT43A0026
0953AT43A0006
1575AM55B0001
1575AT43A0040
423 - 443
779 - 787
858 - 878
880 - 960
902 - 928
950 - 956
1575.42 ± 5 MHz
1555 - 1595
-4 dBi typ. (XZ-total)
-2.0 dBi typ. (XZ-total)
-1.0 dBi typ (XZ-total)
-0.7 dBi typ (XZ-V)
-1.0 dBi typ (XZ-total)
-1.0 dBi typ.(XZ-total)
1.3 dBi typ (YZ-total)
- 1.5 dBi typ (XZ-V)
-4 dBi typ. (XZ-total)
-5.0 dBi typ. (XZ-total)
-4.0 dBi typ (XZ-total)
-2.6 dBi typ (XZ-V)
-4.0 dBi typ (XZ-total)
-1.0 dBi typ.(XZ-total)
-0.7 dBi typ (YZ-total)
-2.5 dBi typ (XZ-V)
9.5 dB
9.5 dB
9.5 dB
8.5 dB
8.5 dB
9.5 dB
9.5 dB
9.5 dB
See Spec Sheet
43-1
43-1
50
43-1
43-1
See Spec Sheet
43-1
1575AT47A0040
1555 - 1595
-1.0 dBi typ (XZ-V)
-3.0 dBi typ (XZ-V)
9.5 dB
47-1
1575AT54A0010
1570 - 1580
1.3 dBi typ (YZ-Total)
-0.7 dBi typ (YZ-Total)
9.5 dB
See Spec Sheet
1600AT45A0040
1580 - 1620
0.0 dBi typ (XZ-Total)
-1.0 dBi typ (XZ-Total)
9.5 dB
45-1
2000AT18A0075
1965 - 2040
0.3 dBi typ (XZ-V)
-3 dBi typ (XZ-V)
9.5 dB
18-4
2450AT18A100
2450AT18A0150
2450AT18B100
2450AT18D0100
2450AT42A100
2450AT42B100
2400 - 2500
2375 - 2525
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
0.5 dBi typ (XZ-V)
0.5 dBi typ (XZ-V)
0.5 dBi typ (XZ-V)
1.5 dBi typ.(XZ-V)
0 dBi typ (XZ-V)
0 dBi typ (XZ-V)
-0.5 dBi typ (XZ-V)
-0.5 dBi typ (XZ-V)
-0.5 dBi typ (XZ-V)
-1.0 dBi typ.(XZ-V)
-1 dBi typ (XZ-V)
-1.5 dBi typ (XZ-V)
9.5 dB
9.5 dB
9.5 dB
6.0 dB
9.5 dB
9.5 dB
18-4
18-4
18-4
18-5
42-1
42-1
2450AT42D0100
2400 - 2500
0.5 dBi typ (XZ-total)
-2.0 dBi typ (XZ-V)
6.0 dB
42-1
2450AT43A100
2400 - 2500
2.0 dBi typ (XZ-V)
0.5 dBi typ (XZ-V)
9.5 dB
43-1
2450AT43B100
2450AT43F0100
2450AT43H0100
2450AT45A100
2450AD46A5400
(Dual Band)
2500AT43A0100
2500AT44M0400
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
LB: 2400 - 2500
HB: 4900 - 5900
2450 - 2550
2300 - 2700
1.3 dBi typ (XZ-V)
2.1 dBi typ (XZ-total)
2.1 dBi typ. (XZ-V)
3.0 dBi typ (XZ-V)
1.0 dBi typ (XZ-V)
-1.5 dBi typ (XZ-V)
0.6 dBi typ (YZ-total)
2.5 dBi typ
-0.5 dBi typ (XZ-V)
1.0 dBi typ (XZ-total)
1.0 dBi typ. (XZ-V)
1.0 dBi typ (XZ-V)
-2.5 dBi typ (YZ-V)
-2.5 dBi typ (YZ-V)
-2.1 dBi typ (XZ-total)
0.5 dBi typ
9.5 dB
--9.5 dB
9.5 dB
8.5 dB
8.5 dB
3.0 dB
9.5 dB
43-2
See Spec Sheet
See Spec Sheet
45-1
2600AT44A0600
2300 - 2900
2.0 dBi
0.0 dBi typ.
9.5 dB
42-2
2650AT43A0100
3100AT51A7200
4000AT44A1800
5250AT43A200
5400AT18A1000
5500AT18A0725
5500AT07A0900
2600 - 2700
3100 - 10300
3100 - 4900
5150 - 5350
4900 - 5900
5150 - 5875
5725 - 5825
0.5 dBi typ (YZ-total)
1.5 dBi typ
2.7 dBi typ
3.6 dBi typ (XZ-V)
2.0 dBi typ (XZ-V)
2.0 dBi typ. (XZ-V)
3.9 dBi typ (XZ-V)
-1.7 dBi typ (XZ-total)
-3.5 dBi typ
-3.5 dBi typ
-2.3 dBi typ (XZ-V)
-2.5 dBi typ (XZ-V)
-2.5 dBi typ. (XZ-V)
-1.5 dBi typ (XZ-V)
3.0 dB
9.5 dB
7.4 dB
9.5 dB
8.5 dB
9.5 dB
9.5 dB
50
51-1
See Spec Sheet
43-1
18-4
18-4
43-1
46-1
43-1
44-2
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
www.johansontechnology.com
29
Band-pass FilTers: 2.45 gHz
Part
Number
Frequency
(MHz)
Insertion
Loss (max.)
2450BP07A0100
2400 - 2500
2.5 dB
2450BP14D0100
2400 - 2500
1.7 dB
2450BP14E0100
2400 - 2500
2.5 dB
2450BP15B100
2400 - 2500
2.2 dB
2450BP15C100
2400 - 2500
2.2 dB
2450BP15D100
2400 - 2500
2.6 dB
2450BP15E0100
2400 - 2500
1.5 dB
2450BP15F0100
2400 - 2500
2.5 dB
2450BP15G0100
2400 - 2500
2.0 dB
2450BP15H0100
2400 - 2500
1.5 max.@ 25°C
1.8 max.
@ -40 - 85°C
Attenuation
(min)
25 dB @ 824 - 960 MHz
25 dB @ 1710 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
30 dB @ 880 - 915 MHz
30 dB @ 1710 - 1785 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
35 dB @ 824 - 960 MHz
38 dB @ 1710 - 1910 MHz
25 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
25 @ 1200 - 1300 MHz
10 @ 2000 MHz
12 @ 3000 MHz
30 @ 3600 - 3800 MHz
34 @ 4800 - 5000 MHz
30 dB @ 1200 - 1300 MHz
15 dB @ 2000 MHz
25 dB @ 3000 MHz
20 dB @ 3600 - 3800 MHz
20 dB @ 4800 - 5000 MHz
30 dB @ 880 - 1990 MHz
20 dB @ 2110 - 2170 MHz
30 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
30 dB @ 880 - 915 MHz
30 dB @ 1710 - 1785 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
35 dB @ 824 - 960 MHz
38 dB @ 1710 - 1910 MHz
25 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
30 dB @ 824 - 960 MHz
28 dB @ 1710 - 1910 MHz
20 dB @ 1910 - 1990 MHz
30 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
25 dB @ 1200 - 1300 MHz
10 dB @ 2000 MHz
12 dB @ 3000 MHz
30 dB @ 3600 - 3800 MH
34 dB @ 4800 - 5000 MHz
Return Loss
(min)
Case Size
(EIA)
9.5 dB
0402
9.5 dB
0603
9.5 dB
0603
9.5 dB
0805
9.5 dB
0805
9.5 dB
0805
9.5 dB
0805
9.5 dB
0805
9.5 dB
0805
9.5 dB
0805
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
30
www.johansontechnology.com
Band-pass FilTers: 2.45 gHz
Part
Number
Frequency
(MHz)
Insertion
Loss (max.)
2450BP18C100E
2400 - 2500
2.5 dB
2450BP39C100A
2400 - 2500
2.5 dB
2450BP39C100B
2400 - 2500
1.8 dB
2450BP39C100C
2400 - 2500
1.5 dB
2450BP39C100D
2450 ± 50
2.2 dB
2450BP39D100B
2400 - 2500
2.5 dB
2450BP39D100C
2400 - 2500
1.2 dB
Attenuation
(min)
40 dB @ 1200 - 1800 MHz
25 dB @ 2100 MHz
35 dB @ 4800 - 5000 MHz
25 dB @ 7200 - 7500 MHz
42 dB @ 1710 - 1990 MHz
30 dB @ 2100 MHz
30 dB @ 4800 - 5000 MHz
30 dB @ 1710 - 1780 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
30 dB @ 800 - 915 MHz
30 dB @ 1710 - 1785 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
30 dB @ 880 - 915MHz
30 dB @ 1710 - 1785MHz
25 dB @ 1850 - 1910MHz
25 dB @ 2100MHz
25 dB @ 4800 - 5000MHz
15 dB @ 7200 - 7500MHz
35 dB @ 880 - 915 MHz
18 dB @ 1710 - 1990 MHz
12 dB @ 2100 MHz
35 dB @ 3200 MHz
22 dB @ 4800 - 5000 MHz
22 dB @ 7200 - 7500 MHz
30 dB @ 880 - 915 MHz
30 dB @ 1710 - 1785 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
Return
Loss (min)
Case Size
(EIA)
9.5 dB
1206
9.5 dB
2520
9.5 dB
2520
9.5 dB
2520
9.5 dB
2520
9.5 dB
2520
9.5 dB
2520
We design, develop, and manufacture passive RF
Diplexers/Triplexer for GPS/GLNSS+BLE/WiFi +
WLAN for portable applications. Small EIA 0603 or
0805 are achievable using LTCC technology integrated to receive and filter, and split 1.5, 2.45, and
5.5GHz signals for various RF chipsets who offer
combined functionality. These components are also
used in wideband antenna systems where diplexing/
triplexing RF signals is required
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
www.johansontechnology.com
31
Band-pass FilTers: 2.45 gHz
Part
Number
Frequency
(MHz)
Insertion
Loss (max.)
2450BP39D100E
2400 - 2500
1.2 dB
2450BP39F100A
2400 - 2500
2.4 dB
2450BP41D100A
2400 - 2500
2.3 dB
2450BP41D100B
2400 - 2500
1.3 dB
2500BP15M400
2300 - 2700
2.0 dB
Attenuation
(min)
30 @ 880 - 915 MHz
30 @ 1710 - 1785 MHz
25 @ 1850 - 1910 MHz
2 @ 2700 MHz
25 @ 4800 - 5000 MHz
15 @ 7200 - 7500 MHz
45 dB @ 880 - 915 MHz
48 dB @ 1710 - 1990 MHz
20 dB @ 2110 - 2170 MHz
30 dB @ 4800 - 5000 MHz
36 dB @ 7200 - 7500 MHz
40 dB @ 1200 - 1800 GHz
30 dB @ 2100 GHz
12 dB @ 2200 GHz
35 dB @ 4800 - 5000 GHz
30 dB @ 880 - 915 MHz
30 dB @ 1710 - 1785 MHz
20 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
15 dB @ 100 - 1800 MHz
20 dB @ 3400 - 11700 MHz
Return Loss
(min)
Case Size
(EIA)
9.5 dB
2520
9.5 dB
2520
9.5 dB
See Spec Sheet
9.5 dB
See Spec Sheet
9.5 dB
2520
Band-pass FilTers: 5.5 gHz
Part
Number
Frequency
(MHz)
Insertion
Loss (max.)
5515BP15B975
4900 - 5875
1.5 dB
5515BP15C725
5150 - 5875
2.0 dB
5515BP15C975
4900 - 5875
1.8 dB
5515BP15C1020
4900 - 5920
1.5 dB
Attenuation
(min)
Return Loss
(min)
Case Size
30 dB @ 3500 MHz
9.5 dB
0805
9.5 dB
0805
8.5 dB
0805
9.5 dB
0805
30 dB @ 500 - 4000 MHz
20 dB @ 4600 MHz
15 dB @ 10300 - 11800 MHz
30 dB @ 500 - 4000MHz
20 dB @ 4200MHz
15 dB @ 9800 - 11750MHz
30 dB @ 3500 MHz
.
Compact SMD filters developed with “easy RF” in mind provide
passive >35dB attenuation levels very close to passband without compromising insertion loss. The recommended application
is MoCA D-Band. This cost effective filter was designed to use
a small effective footprint and easily matched to 75ohm systems. p/n 1400BP41A0550
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
32
www.johansontechnology.com
Band-pass FilTers: oTHer
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
(min)
Return Loss
(min)
Case Size
(EIA)
1200BP44A575
950 - 1525
2.8 dB
25 dB @ 100 - 480 MHz
25 dB @ 1900 - 3050 MHz
7.0 dB
1812
1810BP07B200
1700 - 1900
1.8 dB
TBD
0402
1906BP18C027
1893 - 1920
3.0 dB
9.5 dB
See Spec Sheet
1906BP39B027
1893 - 1920
2.8 dB
9.5 dB
See Spec Sheet
2593BP44B186
2500 - 2686
2.0 dB
9.5 dB
1812
2598BP39A0205
2495 - 2700
3.0 dB
9.5 dB
See Spec Sheet
2500 - 2700
2.2 dB max @
25°C
2.5 dB max @
-40 - 85°C
9.5 dB
See Spec Sheet
3600BP14M0600
3300 - 3700
1.8 dB max @
25°C
2.0 dB max @
-40 - 85°C
12 dB
See Spec Sheet
3600BP15M600
3300 - 3900
1.8 dB
9.5 dB
0805
3960BP39A1584
3168 - 4752
2.5 dB
9.5 dB
See Spec Sheet
4000BP15U1800
3100 - 4900
2.0 dB
8.5 dB
0805
4560BP39A0180
4470 - 4650
2.97 dB
17.5 dB
See Spec Sheet
2600BP14M0200
20 dB @ 855-955 (Prelim.)
10 dB @ 2565-2865 (Prelim.)
40 dB @ 1427 - 1454 MHz
35 dB @ 1660 - 1687 MHz
15 dB @ 2126 - 2153 MHz
40 dB @ 1660 MHz
12 dB @ 2139 MHz
40 dB @ 1870 - 2056 MHz
12 dB @ 2039 - 2244 MHz
24 dB @ 2951 - 3156 MHz
12 dB @ 4990 - 5400 MHz
30 dB @ 806 - 915MHz
30 dB @ 1710 - 1785MHz
30 dB @ 1850 - 1910MHz
30 dB @ 1920 - 1980MHz
13 dB @ 3300 - 3900MHz
20 dB @ 4900 - 5900MHz
30 dB @ 806 - 915MHz
30 dB @ 1710 - 1785MHz
30 dB @ 1850 - 1910MHz
30 dB @ 1920 - 1980MHz
31 dB @ 2400 - 2500MHz
18 dB @ 4900 - 5900MHz
15 dB @ 100 - 2600 MHz
9 dB @ 4400 MHz
20 dB @ 6000 - 9900 MHz
30 dB @ 2400 - 2500 MHz
12 dB @ 5150 MHz
25 dB @ 5950 MHz
25 dB @ 1.75 GHz
13 dB @ 2.10 GHz
48.3 dB @ < 2540 MHz
19.1 dB @ 4020 MHz
19 dB @ 5150 - 5350 MHz
35.9 dB @ 5725 - 7000 MHz
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
www.johansontechnology.com
33
HigH-pass FilTers
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
(min)
Return Loss
(min)
Case Size
(EIA)
1900HP41B500
1900HP41C0500
1650 - 2150
1650 - 2150
2.0 dB (Prelim)
2.0 dB
8.5 dB
8.5 dB
1210
1210
2450HP14A100
2400 - 2500
1.0 dB
9.5 dB
1210
2450HP15A100
2400 - 2500
0.85 dB
27 dB @ 950 - 1450 MHz (Prelim)
27 dB @ 950 - 1450 MHz
9 dB @ 824 - 960 MHz
20 dB @ 1917 MHz
25 dB @ 875 - 920 MHz
20 dB @ 1705 - 1790 MHz
19 dB @ 1845 - 1915 MHz
9.5 dB
See Spec
Sheet
3550HP15A0500
3300 - 3800
0.6 dB max. @
25°C
0.8 dB max. @ -4085°C
40 dB @ 1710-1910 MHz
9.5 dB
See Spec
Sheet
5200HP15A4200
3100 - 7300
2.5 dB
30 dB @ < 2540 MHz
12 dB @ 2800 MHz
9.5 dB
See Spec
Sheet
EMI FILTER
Part
Number
No. of
Sections
Cutoff
Freq (MHz)
Attenuation
(min)
Case Size
0400FA15A0400
4
400
20 dB @ 800 - 1000 MHz
See Spec Sheet
JoHanson-Texas insTruMenTs reFerenCe design - CC2530
Complete passive component integration for RF Chipsets layout
and design.
Johanson matched-impedance balun-filter integrated passive
with TI CC2530 RF chipset.
Note: Only one component between chip and antenna SMA
Johanson p/n: 2450BM15A0002
T.I. CC2530 Reference Design using Johanson
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
34
www.johansontechnology.com
low-pass FilTers
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
0500LP15A500
0 - 500
0.7 dB
0868LP15A020
858 - 878
0.5 dB
0869LD14D1810
824 - 915
1710 - 1910
0.6 dB
0.6 dB
0869LP14A090
824 - 915
0.6 dB
0892LP07A136
824 - 960
0.7 dB
0898LP18A035
880 - 915
0.6 dB
0915LP15A026
902 - 928
0.65 dB
0915LP15B026
902 - 928
0.5 dB
1175LP15A0550
1200LP41B0500
1200LP41C0500
900 - 1450
950 - 1450
950 - 1450
2.5 dB
2.0 dB
2.0 dB
1748LP18A075
1710 - 1785
0.6 dB
1810LP07A200
1710 - 1910
0.5 dB
1810LP07B200
1710 - 1910
0.6 dB
1810LP14A200
1710 - 1910
0.6 dB
1880LP14A060
1850 - 1910
0.6 dB
2450LP15B050
2400 - 2500
0.5 dB
2400LP18A0200
2300 - 2500
0.6 dB
2450LP07A0100
2450LP14A100
Attenuation
(min)
Return Loss
(min)
Case Size
(EIA)
9.5 dB
See Spec Sheet
14.0 dB
0805
14 dB
0603
10.9 dB
0603
9.5 dB
See Spec Sheet
10.9 dB
1206
9.5 dB
0805
14.0 dB
0805
9.5 dB
8.5 dB
8.5 dB
0805
See Spec Sheet
See Spec Sheet
10.9 dB
1206
10.9 dB
0402
9.5 dB
0402
30 dB @ 3420 - 3570 MHz
25 dB @ 3700 - 3820 MHz
20 dB @ 5130 - 5730 MHz
11.7 dB
0603
27 dB @ 2xFo
19 dB @ 3xFo
32 dB @ 2 x Fo
30 dB @ 3 x Fo
30 dB @ 4 x Fo
27 dB @ 2 x Fo
18 dB @ 3 x Fo
11.7 dB
0603
10.9 dB
See Spec Sheet
10.9 dB
See Spec Sheet
2400 - 2500
0.45 dB max
@ 25°C
0.55 dB max
@ -40-85°C
21 dB @ 4800 - 5000 MHz
21 dB @ 7200 - 7500 MHz
11.7 dB
0402
2400 - 2500
0.5 dB
25 dB @ 2xFo
18 dB @ 3xFo
14.0 dB
0603
9 dB @ 824 - 960 MHz
25 dB @ 1710 - 1990 MHz
25 dB @ 2400 - 4000 MHz
30 dB @ 2 x Fo
40 dB @ 3 x Fo
25 dB @ 1648-1830 - 25 dB
@ 3420-3820
25 dB @ 2472 - 2745 - 25 dB
@ 5130-5730
20 dB @ 2xFo
15 dB @ 3xFo
18 dB @ 1648 - 1920 MHz
25 dB @ 2472 - 2880 MHz
25 dB @ 3296 - 3840 MHz
30 dB @ 2xFo
18 dB @ 3xFo
25 dB @ 2xFo
25 dB @ 3xFo
30 dB @ 2xFo
30 dB @ 3xFo
25 dB @ 1650 - 2200 MHz
24 dB @ 1650-2150 (+25°C)
24 dB @ 1650-2150 (+25°C)
30 dB @ 3500 MHz
20 dB @ 5240 MHz
20 dB @ 2xFo
20 dB @ 3xFo
26 dB @ 3420 - 3570 MHz
21 dB @ 3700 - 3820 MHz
21 dB @ 5130 - 5730 MHz
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
www.johansontechnology.com
35
low-pass FilTers
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
(min)
Return Loss
(min)
Case Size
(EIA)
2450LP14B100
2400 - 2500
0.5 dB
14.0 dB
0603
2450LP15A050
2400 - 2500
0.5 dB
10.9 dB
0805
2500LP14A0400
2300 - 2700
0.55 dB
11.7 dB
0603
2500LP14B0400
2300 - 2700
0.62 dB
14.0 dB
0603
3550LP14A300
3400 - 3700
0.65 dB
14.0 dB
0603
5515LP15A730
5150 - 5875
0.5 dB
35 dB @ 2xFo
25 dB @ 3xFo
27 dB @ 2xFo
25 dB @ 3xFo
35 dB @ 2 x Fo
25 dB @ 3 x Fo
27 dB @ 2 x Fo
25 dB @ 3 x Fo
25 dB @ 3xFo
25 dB @ 2xFo
18 dB @ 3xFo
10.9 dB
0805
Return Loss
(min)
Case Size
(EIA)
18 dB
20 dB
9.5 dB
0603
LOW PASS FILTER, DUAL
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
0869LD14C1810
824 - 915
1710 - 1910
0.6 dB
0.6 dB
Attenuation (min)
2xFo 3xFo
25 dB
22 dB
COUPLERS, DIRECTIONAL
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return Loss
(min)
Coupling
(dB)
Isolation
(min.)
Case Size
(EIA)
0450CP14A0040
0869CP14A090
0898CP14A035
0898CP15A035
0967CP14A024
1810CP14A200
430 - 470
824 - 915
880 - 915
880 - 915
955 - 979
1710 - 1910
0.2 dB
0.3 dB
0.28 dB
0.50 dB
0.50 dB
0.30 dB
20.8 dB
15.6 dB
15.6 dB
14.0 dB
15.6 dB
15.6 dB
27.5 ± 2.0 dB
17 ± 1.0 dB
18 ± 1.0 dB
20 ± 1.0 dB
12.5 ± 1.0 dB
20 ± 1.0 dB
45.0 dB
26.0 dB
26.0 dB
25.0 dB
19.0 dB
25.0 dB
0603
0603
0603
0805
0603
0603
2450CP14A100
2400 - 2500
0.74 dB
TBD dB
10 ± 1.0 dB
22.0 dB
0603
2450CP14B100
2400 - 2500
0.34 dB
TBD dB
17.65 ± 1.0 dB
25.0 dB
0603
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
36
www.johansontechnology.com
COUPLER, DIRECTIONAL – DUAL BAND
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return Loss
(min)
Coupling
(dB)
Isolation
(min.)
Case Size
(EIA)
0869CP14B1050
B1) 824 - 915
B2) 999 - 1102
0.4 dB
0.6 dB
15.5 dB
15.5 dB
14.2 ± 1.0
12.7 ± 1.0
23.0 dB
22.0 dB
0603
Coupler, direCTional - dual Band, dual paTH
Part
Number
0898CD15D1748
Frequency
(MHz)
Insertion
Loss (max)
B1) 1710-1785
B2) 880-915
Return
Loss (min)
0.50 dB
0.35 dB
Coupling
(dB)
14.0 dB
14.0 dB
14.0 ± 1.5
19.2 ± 1.0
Isolation
(min.)
B1 In > B2 Out:
B1 In > B2 In:
B1 Out > B2 In:
B1 In > Term:
B2 In > Term:
Case Size
(EIA)
25.5 dB
21.0 dB
22.0 dB
17.0 dB
24.0 dB
0805
Coupler, direCTional wiTH low pass FilTer
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return
Loss (min)
Coupling
(dB)
Isolation
(min.)
0898CF15A035
880 - 915
0.7 dB
14 dB
20 ± 1.0
25.0 dB
0910CF15B0100
860 - 960
1.2 dB
20 dB
10 ± 1.0
30.0 dB
1748CF15A075
2450CF15A0100
5300CF15A0950
1710 - 1785
2400 - 2500
4900 - 5850
0.5 dB
0.8 dB
0.8 dB
14 dB
20 dB
20 dB
20 ± 1.0
15 ± 1.0
15 ± 1.0
25.0 dB
22.0 dB
22.0 dB
Attenuation (min.)
2 x Fo 3 x Fo
22.0 dB 17.0 dB
27 dB @ 2 x Fo
30 dB @ 3 x Fo
30 dB @ 4 x Fo
30 dB @ 5 x Fo
22.0 dB
20.0 dB
20.0 dB
Case
Size (EIA)
0805
See Spec
Sheet
0805
0805
0805
Coupler, direCTional 3dB HyBrid
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return Loss
(min)
Isolation
(min.)
Case Size
(EIA)
0880CH15A060
1575CH15A0030
1950CH15A100
850 - 910
1560 - 1590
1900 - 2000
3.3 ± 0.5 dB
3.3 ± 0.5 dB max.
3.3 ± 0.5 dB
14.0 dB
10.0 dB
14.0 dB
20.0 dB
0805
0603
0805
16.0 dB
Reference design Co-development solutions
with full RF Chipset impedance characterizations in all modes to design conjugate impedance balun, add a low pass, band pass or high
pass filter. Integrating 25+ passives in small
case size (i.e.EIA0402 -1206)
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
www.johansontechnology.com
37
Baluns, CeraMiC CHip
Part
Number
Frequency
(MHz)
Impedance
Unbal./Bal.
Insertion
Loss (max)
Return Loss
(min)
Phase
Difference
Amplitude
Difference
(max)
Case Size
(EIA)
0430BL15A0100
0465BL15B100
0896BL14B050
0866BL15C200
0900BL15C050
0900BL18B100
0900BL18B200
0900BL15A100
0917BL18B100
1450BL15A200
1600BL15B050
1600BL15B100
1800BL18B200
1850BL15B050
1850BL15B100
1850BL15B200
2100BL18B200
2100BL15A100
2450BL07A0100
400 - 460
460 - 470
851 - 941
800 - 900
800 - 1000
800 - 1000
800 - 1000
900 - 1000
889 - 945
1400 - 1500
1500 - 1700
1500 - 1700
1700 - 1900
1700 - 2000
1700 - 2000
1700 - 2000
2000 - 2200
2100 - 2200
2400 - 2500
50/100
50/100
50/50
50/200
50/50
50/100
50/200
50/100
50/100
50/200
50/50
50/100
50/200
50/50
50/100
50/200
50/200
50/100
50/100
1.0 dB
1.0 dB
1.5 dB
1.2 dB
1.2 dB
1.0 dB
1.0 dB
1.2 dB
1.0 dB
1.0 dB
1.0 dB
1.0 dB
0.8 dB
1.0 dB
1.0 dB
1.0 dB
0.8 dB
1.0 dB
1.3 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
2.0 dB
1.5 dB
0.7 dB
1.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2450BL14B050
2450BL14B100
2450BL14C050
2450BL14C100
2450BL14B200
2450BL14C200
2450BL15B050
2450BL15B100
2450BL15B150
2450BL15B200
2450BL15K050
2450BL15K100
2500BL14M050
2500BL14M100
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2300 - 2700
2300 - 2700
50/50
50/100
50/50
50/100
50/200
50/200
50/50
50/100
50/150
50/200
50/50
50/100
50/50
50/100
1.5 dB
1.3 dB
1.2 dB
1.2 dB
1.2 dB
1.3 dB
1.0 dB
1.0 dB
1.0 dB
1.0 dB
1.2 dB
1.0 dB
1.2 dB
1.2 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±15°
180°±15°
2.0 dB
2.0 dB
2.0 dB
1.5 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
1.5 dB
1.5 dB
0805
0805
0603
0805
0805
1206
1206
0805
1206
0805
0805
0805
1206
0805
0805
0805
1206
0805
See Spec
Sheet
0603
0603
0603
0603
0603
0603
0805
0805
0805
0805
0805
0805
0603
0603
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
38
www.johansontechnology.com
Baluns, CeraMiC CHip
Part
Number
3600BL14M100
3700BL15B050
3700BL15B100
3700BL15B200
4000BL14U100
5425BL07A0200
5250BL15B100
5400BL14B100
5400BL15B050
5400BL15B100
5400BL15B200
5400BL15K050
5500BL15U0100
5400BL14B100
5800BL15B100
Frequency
(MHz)
Impedance
Unbal./Bal.
Insertion
Loss (max)
Return Loss
(min)
Phase
Difference
Amplitude
Difference
(max)
Case Size
(EIA)
3300 - 3900
3400 - 4000
3400 - 4000
3400 - 4000
3100 - 4800
4900 - 5950
5150 - 5350
4900 - 5875
4900 - 5900
4900 - 5900
4900 - 5875
4900 - 5875
3000 - 8000
5150 - 5875
5725 - 5875
50/100
50/50
50/100
50/200
50/100
50/200
50/100
50/100
50/50
50/100
50/200
50/50
50/100
50/100
50/100
1.2 dB
1.2 dB
1.0 dB
1.2 dB
1.2 dB
1.2 dB
1.2 dB
1.0 dB
1.0 dB
1.0 dB
1.0 dB
1.2 dB
1.8 dB
1.0 dB
1.0 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
8.5 dB
9.5 dB
11.7 dB
9.5 dB
180°±15°
180°±25°
180°±20°
180°±20°
180°±20°
180°±15°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±10°
180°±20°
180°±10°
180°±8°
1.5 dB
2.0 dB
1.0 dB
1.0 dB
1.5 dB
2.0 dB
2.0 dB
1.5 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
2.0 dB
0.75 dB
0603
0805
0805
0805
0603
0402
0805
0603
0805
0805
0805
0805
0805
0805
0805
Baluns, CeraMiC CHip - DUAL BAND
Part
Number
Frequency
(MHz)
Impedance
Unbal./Bal.
Insertion
Loss (max)
Return Loss
(min)
Phase
Difference
Case Size
(EIA)
0918BD41B050
B1: 900 - 940
B2: 1850 - 1920
50/50
50/50
1.2 dB
1.7 dB
8.5 dB
8.5 dB
180°±10°
180°±10°
1210
speCiFiC rF CHipseT iMpedeanCe-MaTCHed Balun/FilTers inTegraTed passives; reFerenCe designs
Part
Number
Frequency
(MHz)
Unbalanced
Impedance
Differential
Balanced Imp.
Insertion
Loss (max)
Return
Loss (min)
Phase
Difference
0896BM15A0001
863 - 928
50
1.5 dB
9.5 dB
180°±10°
0896FB15A0100
0953BM15A0001
2450BM15B0009
863 - 928
950 - 956
2400 - 2500
50
50
50
1.5 dB
2.1 dB
1.5 dB
9.5 dB
9.5 dB
9.5 dB
180°±10°
180°±10°
180°±10°
2450FB15K0002
2400 - 2500
50
Conj match to T.I. CC11XX
and CC430
Conj match to AT86RF212
Conj. match to T.I. CC11XX
Conj match to ZIC2410
Conj match to CSR BC03,
BC04(16-j40)
3 dB
9.54 dB
180°±10°
2450FB15K0005
2400 - 2500
50
Conj match to BC series of CSR
3.5 dB
9.5 dB
180°±10°
2450FB15K0008
2400 - 2500
50
Conj match to BC series of CSR
3.5 dB
9.5 dB
180°±10°
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
www.johansontechnology.com
39
speCiFiC rF CHipseT iMpedeanCe-MaTCHed Balun/FilTers inTegraTed passives; reFerenCe designs
Part
Number
Frequency
(MHz)
Unbalanced
Impedance
Differential
Balanced Imp.
Insertion
Loss (max)
Return
Loss (min)
Phase
Difference
2450FB15L0001
2400 - 2500
50
1.5 dB
9.5 dB
180°±10°
2450FB15M0001
2400 - 2500
50
3.0 dB
9.5 dB
180°±15°
2450BM14A0002
2400 - 2500
50
2.0 dB
9.5 dB
160°±15°
2450BM15A0001
2400 - 2500
50
1.0 dB
10.0 dB
180°±15°
2450BM15B0003
2400 - 2500
50
2.2 dB
10.0 dB
180°±12°
2450BM15B0002
2400 - 2500
50
1.5 dB
10.0 dB
180°±15°
2450BM15A0002
2400 - 2500
50
Imp. match to AT86RF230/231
& ATmega128RFA1
Conj match to MTK
and BC05 chipsets
Conj match to nRF24L01/
nRF24L01
Conj match to T.I.
Chipsets CC2430 and CC2480
Conj match to T.I. Chipset 2500
Conjugate match to
TI Chipset 2520
Conjugate match to
T.I. CC253X and CC2540
1.5 dB
10.0 dB
180°±15°
Balun-FilTer, CeraMiC CHip
Part
Number
Frequency
(MHz)
Impedance
Unbal./Bal.
Insertion
Loss (max)
Return Loss
(min)
Phase
Difference
Case Size
(EIA)
0783FB15A0100
0896FB15A0100
2345FB16A0100
2345FB39A0050
2450FB15A0100
2450FB15K0002
779 - 787
868 - 915
2300 - 2390
2300 - 2390
2400 - 2500
2400 - 2500
1.5 dB
1.5 dB
2.8 dB
3.2 dB
1.5 dB
3.0 dB
9.5 dB
11.7 dB
9.5 dB
11.7 dB
9.5 dB
9.54 dB
180°±15°
180°±15°
180°±10°
180°±10°
180°±10
180°±10°
0805
0805
0805
1008
0805
0805
2450FB15M0001
2400 - 2500
3.0 dB
9.5 dB
180°±15°
0805
2450FB39A050
2450FB39A0150
2450FB39B100
2595FB39A0050
2500FB16A0400
2595FB16A0100
2400 - 2500
2400 - 2500
2400 - 2500
2500 - 2690
2300 - 2690
2300 - 2690
50/100
50/100
50/100
50/50
50/100
50 / 16+j40
50 / Conjugate match
(20+j60) to MTK &
BC05 Chipset
50/50
50/150
50/100
50/50
50/50+2.4nH
50/100
2.0 dB
2.5 dB
2.0 dB
3.2 dB
3.8 dB
2.5 dB
9.5 dB
9.5 dB
9.5 dB
11.73 dB
9.5 dB
9.5 dB
180°±10°
180°±10°
180°±10°
180°± 10°
180°± 10°
180°± 10°
2025
2025
2025
See Spec Sheet
See Spec Sheet
See Spec Sheet
3500FB16A0100
3400 - 3600
50/100
2.7 dB
9.5 dB
180°± 10°
See Spec Sheet
3500FB39A0050
3400 - 3600
50/50
2.9 dB
9.5 dB
180°± 12°
See Spec Sheet
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
40
www.johansontechnology.com
diplexers, CeraMiC CHip - lpF / HpF
Part
Number
0859DP18A1920
0892DP14A1850
Frequency
(MHz)
Insertion
Loss (max)
824 - 894
1850 - 1990
824 - 960
1710 - 1990
0.75 dB
0.55 dB
0.5 dB
0.8 dB
824 - 960
0.7 dB
0892DP15A1940
1710 - 1990
824 - 960
0.8 dB
0.7 dB
0892DP15D1940
0920DP18A1795_
0967DP18A1795_
2450DP15A5512
2450DP15K5400
Attenuation
Low Band
Attenuation
High Band
Return Loss
(min)
20 dB min
20 dB min
12 dB
15 dB min
25 dB min
12 dB
16 min. @
1648 - 1830 MHz
22 min. @
2472 - 2745 MHz
15 min. @
3300 - 3680 MHz
12 min. @
4100 - 4600 MHz
15 min. @
4920 - 5520 MHz
15 min. @
5740 - 6440 MHz
15 min. @
6560 - 7360 MHz
18 min. @
3420 - 3820 MHz
20 min. @
5130 - 5730 MHz
15 min. @
6800 -7680 MHz
18 min. @
3420 - 3820 MHz
20 min. @
5130 - 5730 MHz
15 min. @
6800 - 7680 MHz
15 dB
16 min. @
1648 - 1830 MHz
22 min. @
2472 - 2745 MHz
15 min. @
3300 - 3680 MHz
12 min. @
4100 - 4600 MHz
15 min. @
4920 - 5520 MHz
15 min. @
5740 - 6440 MHz
15 min. @
6560 - 7360 MHz
18 min. @
3420 - 3820 MHz
20 min. @
5130 - 5730 MHz
15 min. @
6800 -7680 MHz
18 min. @
3420 - 3820 MHz
20 min. @
5130 - 5730 MHz
15 min. @
6800 - 7680 MHz
15 dB
1710 - 1990
0.8 dB
880 - 960
1710 - 1880
954 - 980
1710 - 1880
2400 - 2500
5150 - 5875
0.75 dB
0.55 dB
0.75 dB
0.55 dB
0.70 dB
0.90 dB
20 dB min
20 dB min
12 dB
20 dB min.
20 dB min.
12 dB
20 dB min
15 dB min
9.5 dB
2400 - 2500
5150 - 5875
0.70 dB
0.90 dB
20 dB min
15 dB min
9.5 dB
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
www.johansontechnology.com
41
diplexers, CeraMiC CHip - lpF / BpF
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
0892DP15B1850
824 - 960
1710 - 1990
1.3 dB
1.35 dB
2450DP15D5400
2400 - 2500
4900 - 5875
0.7 dB
1.4 dB
2450DP15E5400
2400 - 2500
4900 - 5900
0.7 dB
1.6 dB
2450DP15F5400
2400 - 2500
4900 - 5900
0.7 dB
1.0 dB
2450DP15G5400
2400 - 2500
4900 - 5900
0.7 dB
1.0 dB
2450DP15H5400
2400 - 2500
4900 - 5900
0.7 dB
1.0 dB
2450DP15J5400
2400 - 2500
4900 - 5900
0.7 dB
1.0 dB
Attenuation
Low Band
Attenuation
High Band
16 dB min @
1628 - 1830 MHz
30 dB min @
2472 - 2745 MHz
27 dB min @
3296 - 4575 MHz
20 dB min. @
4.8 - 6.0 GHz
20 dB min. @
7.2 - 7.5 GHz
20 dB min @
4.8 - 6.0 GHz
17 dB min @
1.8 - 2.5 GHz
18 dB min @
4.8 - 6.0 GHz
19 dB min @
1.8 - 2.5 GHz
18 dB min @
4.8 - 6.0 GHz
19 dB min @
1.8 - 2.5 GHz
18 dB min @
4.8 - 6.0 GHz
19 dB min @
1.8 - 2.5 GHz
18 dB min @
4.8 - 6.0 GHz
19 dB min @
1.8 - 2.5 GHz
18 dB min @
824 - 960 MHz
20 dB min @
3420 - 3820 MHz
27 dB min @
5130 - 5730 MHz
19 dB min @
1.8 - 2.5 GHz
20 dB min. @
10.3 - 10.7 GHz
20 dB min @
7.2 - 7.5 GHz
20 dB typ. @
10.3 - 10.7 GHz
18 dB min @
7.2 - 7.5 GHz
25 dB typ. @
10.3 - 10.7 GHz
18 dB min @
7.2 - 7.5 GHz
25 dB typ. @
10.3 - 10.7 GHz
18 dB min @
7.2 - 7.5 GHz
25 dB typ. @
10.3 - 10.7 GHz
18 dB min @
7.2 - 7.5 GHz
25 dB typ. @
10.3 - 10.7 GHz
Return Loss
(min)
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
9.5 dB
diplexers, CeraMiC CHip - BpF / nF
Part
Number
Frequency
(MHz)
950 - 1450
0500DP44A1215
200 - 750
1650 - 2150
Insertion
Loss
Attenuation
Case
Size
3.6 max. (25°C)
3.9 max. (-40 - +85°C)
2.0 max. (25°C)
2.3 max. (-40 - +85°C)
3.5 max. (25°C)
3.8 max. (-40 - +85°C)
30.0 min. @ 200 - 750MHz
30.0 min. @ 1650 - 2150MHz
30.0 min. @ 950 - 1450MHz
See Spec
Sheet
diplexers, CeraMiC CHip - BpF / nF
Part
Number
1407DP15A2450
Frequency
(MHz)
Insertion
Loss
824 - 960
0.6 dB
1710 - 1880
1.0 dB
1990
2400 - 2500
1.5 dB
2.0 dB
Attenuation Low
Band
Attenuation High
Band
9.5 dB min.
15 min. @
2400 - 2500 MHz
20 min. @
824 - 1990 MHz
Basic case size drawings for above part numbers are located on pages 43-44.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
42
Return
Loss
www.johansontechnology.com
9.5 dB min.
9.5 dB min.
ANTENNAS
Case 42-1
Case 18-4
.079 In.
(2.0 mm)
.063 In
(1.6 mm)
Case 42-2
.079 In.
(2.0 mm)
(Top)
.079 In.
(2.0 mm)
42-1A Th = 1.10 mm
42-1B Th = 3.00 mm
(End)
(Bottom)
(Bottom)
.047 In.
(1.2 mm)
.079 In.
(2.0 mm)
.079 In.
(2.0 mm)
(End)
Case 44-1
(Top)
(Top)
.276 In.
(7.0 mm)
Case 43-3
Case 43-2
.079 In.
(2.0 mm)
(Top)
.197 In.
(5.0 mm)
(Side)
Th.
.051 I
(1.3 mm
.079 In.
(2.0 mm)
(Top)
.197 In.
(5.0 mm)
.126 In.
(3.2 mm)
Case 43-1
(Top)
(End)
.098 In.
(2.5 mm)
(End)
.138 In.
(3.5 mm)
(End)
.276 In.
(7.0 mm)
.236 In
(6.0 mm)
(Bottom)
.079 In
(2.0 mm)
.299 In.
(7.6mm)
.051 In.
(1.3 mm)
Case 44-2
Case 45-1
(Top)
.039 In.
(1.0 mm)
(Top)
.079 In.
(2.0 mm)
Case 46-1
.047 In.
(1.2 mm)
(Top)
0.63 In.
(1.6 mm)
(End)
.335 In.
(8.5 mm)
.374 In.
(9.5 mm)
.315 In.
(8.0 mm)
(Side)
.047 In.
(1.2 mm)
(Bottom)
.039 In
(1.0 mm)
(Bottom)
Case 50
Case 47-1
Case 51-1
(Top)
.118 In.
(3.0 mm)
(Top)
(End)
(End)
(Top)
.201 In
(5.1 mm)
.394 In.
(10.0 mm)
.
.236 In
(6.0 mm)
.
(Bottom)
.433 In .
(11.0mm)
.030 In.
(0.77 mm)
.394 In
(10.0 mm)
.059 In.
(1.5 mm)
(End)
.047 In.
(1.2 mm)
ipC exCepT anTenna
Case 07-2 (EIA 0402/ 1005)
Case 07-1 (EIA 0402/ 1005)
.020 In.
(0.50 mm)
Case 14-1 (EIA 0603/ 1608)
.020 In.
(0.50 m m )
.039 In.
(1.0 mm)
.039 In.
(1.0 m m )
.015 In.
(.38 mm)
.031 In.
(0.80 mm)
.063 In.
(1.6 mm)
.015 In.
(.38 m m )
14-1A Th = 0.60
mm
14-1B Th = 0.55
mm
14-1C Th = 0.35
Th.
www.johansontechnology.com
0.079
(2.0)
0.031
(0.8)
In
(mm)
Case 14-2
.031 In.
(0.80 mm)
.063 In.
(1.6 mm)
.022 In..022 In.
(0.55 mm)
(0.55 mm)
43
ipC exCepT anTenna
Case 15-2 (EIA 0805 / 2012)
Case 15-1 (EIA 0805 / 2012)
.049 In.
(1.25 mm)
.079 In.
(2.0 mm)
15-1A Th = 0.95 mm
15-1B Th = 0.90 mm
15-1C Th = 0.85 mm
15-1D Th = 0.80 mm
15-1E Th = 0.70 mm
15-1F Th = 0.60 mm
15-1G Th = 0.55 mm
15-1H Th = 0.45 mm
Case 15-3 (EIA 0805 / 2012)
15-3A Th = 0.95 mm
15-3B Th = 0.65 mm
.049 In15-3C Th = 0.55 mm
(1.25 mm
15-2A Th = 0.85 mm
15-2B Th = 0.70 mm
.049 In.
(1.25 mm) 15-2C Th = 0.98 mm
15-2D Th = 0.40 mm
.079 In.
(2.0 mm)
.079 In.
(2.0 mm)
Th.
Th.
Th.
Case 18-2 (EIA 1206 / 3216)
Case 18-1 (EIA 1206 / 3216)
Case 15-4 (EIA 0805 / 2012)
15-4A Th = 0.98 mm
15-4B Th = 0.70 mm
.064 In.
(1.6 mm)
.064 In.
(1.6 mm)
.061 In.
(1.55 mm)
.126 In.
(3.2 mm)
.126 In.
(3.2 mm)
.080 In.
(2.03 mm)
Case 18-3 (EIA 1206 / 3216)
.034 In.
(.85 mm)
.034 In.
(.85 mm)
Th.
Case 18-4 (EIA 1206 / 3216)
.063 In.
(1.6 mm)
.063 In.
(1.6 mm)
Case 39-2 (2520)
Case 39-1 (2520)
.079 In.
(2.0 mm)
.079 In.
(2.0 mm)
.126 In.
(3.2 mm)
.098 In.
(2.5 mm)
.126 In.
(3.2 mm)
.098 In.
(2.5 mm)
.05 1In .
Th.
(1 .3m
m m )
.035 In.
(.90 mm)
18-3A Th = .034 (.85 mm)
18-3B Th = .061 (1.3 mm)
18-3C Th = .022 (0.55 mm)
Case 39-3 (2520)
Case 39-4 (2520)
.079 In
(2.0 mm
.098 In.
(2.5 mm
)
Th.
Case 41-1 (EIA 1210 / 3225)
.079 In.
(2.0 mm)
.098 In.
(2.5 mm
)
39-4A Th = 1.2 mm
39-4B Th = 1.1 mm
Th.
39-1A Th = 1.10 mm
39-1B Th = 0.95 mm
39-1C Th = 0.70 mm
39-1D Th = 0.90 mm
Th.
39-2A Th = 1.2 mm
39-2B Th = 1.1 mm
Case 41-2 (EIA 1210 / 3225)
.098 In.
(2.5 mm)
.098 In.
(2.5 mm)
Th.
.126 In.
(3.2 mm)
.059 In.
(1.5 mm)
.126 In.
(3.2 mm)
39-3A Th = .85 mm
39-3B Th = .75 mm
39-3C Th = .70 mm
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
44
www.johansontechnology.com
.0
59 In
(1.5 mm)
CusToM lTCC Module Foundry serviCe
Johanson Technology has the capability to produce a wide range of application specific components for
wireless communication such as Diplexer Switch, VCO, PA and highly integrated RF modules using LTCC (Low
Temperature Co-fired Ceramic) technology. We offer extensive expertise using an internally developed LTCC
tape system.
Design Rules
(A) Via Hole Dia
(B) Via Cover Dot Dia
(C) Via Center Spacing
(D) Via Cover Dot Edge to Line Edge
(E) Line Width
(F) Line to Line Spacing
(G) Line Center Spacing
(H) Outside Edge to Via Center
(I) Line Over Outside Edge for Cutting
(J) Outside Edge to Line Clearance
(M) Buried Ground Plane Spacing
(N) Feed Thru Spacing
Substrate Thickness
Number of Layers
Standard (mm)
Advanced (mm)
0.125, 0.180
≥ Via + 0.03
≥ 0.20 (for 0.07 via)
> 0.10
≥ 0.10
≥ 0.10
≥ 0.18
≥ 0.15
> 0.05
> 0.10
0.10
0.15
0.5 to 1.6
Up to 20
0.06 (min.)
≥ Via + 0.02
≥ 0.18 (for 0.05 via)
> 0.08
≥ 0.05
≥ 0.08
≥ 0.13
≥ 0.135
> 0.05
> 0.10
0.10
0.10
0.3 to 2.4
Up to 30
LTCC Tape Characteristics
JTI
Dielectric Constant (@ 3GHz)
Dielectric Loss (@ 3GHz)
TCE (25-300°C) (ppm/°C)
7.5
0.33%
4.7
www.johansontechnology.com
45
LASERTRIM® SMT TUNER CAPACITORS
Key FeaTures
•
•
•
•
•
•
RoHS Compliant Parts Available
Automates Functional Tuning
High Resolution, High Accuracy Tuning Capability
Highly Stable and Reliable After Adjustment
Small, Standard SMD Chip Sizes
Lower Placement Cost vs Mechanical
APPLICATIONS
• Portable Cellular Products
• Cable Modems
• Wireless Transceivers
• Wireless LAN
• RFID
• Custom Applications
LASERtrim® tuning capacitors are laser adjustable monolithic ceramic surface mount devices for precise
functional tuning of RF circuits. LASERtrims® have the high reliability expected of conventional multi-layer chip
capacitors and do not experience capacitance drift, flux entrapment and other reliability concerns associated
with mechanical trimmers. Excellent post-trim Q and ESR performance are exhibited at frequencies of
100 - 2000 MHz. Offered in chip sizes 0603 to 1210 with nickel barrier terminations and tape and reel packaging,
LASERtrims® are compatible with high volume SMT auto-placement and reflow techniques. These high quality,
drift-free devices are ideally suited for functional tuning applications in oscillator, filter, and antenna circuits in a
variety of wireless RF products.
MODEL SELECTION
RoHS P/N
EIACase Size
CAPACITANCE
Initial
Tuning Range
QUALITY FACTOR
200 MHz
900 MHz
500L14N6R0XG4
0603
6.0 pF
6.0 - 1.00 pF
> 40
---
500L14N100XG4
500L14N120XG4
500L15M6R0XG4
500L15N100XG4
500L15N200XG4
500L18S2R0XG4
500L18M3R0XG4
500L18M4R0XG4
500L18M6R5XG4
500L18N100XG4
500L41S2R5XG4
500L41S3R2XG4
500L41M7R0XG4
101L41M7R0XG4
500L41M120XG4
500L41N210XG4
0603
0603
0805
0805
0805
1206
1206
1206
1206
1206
1210
1210
1210
1210
1210
1210
10.0 pF
12.0 pF
6.0 pF
10.0 pF
20.0 pF
2.0 pF
3.0 pF
4.0 pF
6.5 pF
10.0 pF
2.5 pF
3.2 pF
7.0 pF
7.0 pF
12.0 pF
21.0 pF
10.0 - 2.00 pF
12.0 - 2.00 pF
6.0 - 1.00 pF
10.0 - 1.20 pF
20.0 - 1.50 pF
2.0 - 0.50 pF
3.0 - 1.0 pF
4.0 - 1.00 pF
6.5 - 1.20 pF
10.0 - 2.00 pF
2.5 - 0.50 pF
3.2 - 0.50 pF
7.0 - 1.50 pF
7.0 - 1.50 pF
12.0 - 2.00 pF
21.0 - 3.00 pF
> 125
> 125
> 300
> 75
> 50
> 600
> 500
> 500
> 300
> 125
> 600
> 450
> 400
> 400
> 200
> 75
----> 35
----> 100
----> 40
--> 125
> 125
----> 25
---
Initial capacitance has a tolerance of + 25% - 0%. Trim ranges are approximate and vary with laser settings and trim pattern.
Custom LASERtrims® with features and performance tailored for specific applications are available.
46
www.johansontechnology.com
TUNING DESCRIPTION
LASERtrim® tuning capacitors are used to provide
functional RF circuitry tuning. The tuning is normally
performed at a laser station integrated into the
automated assembly line at a point beyond any
operations that may significantly alter the circuit’s RF
characteristics. Tuning is performed by a computer
controlled YAG laser beam which removes or “trims”
the top electrode material of the LASERtrim® thereby
decreasing it’s capacitance. Circuit parameters such
as frequency or voltage are monitored during tuning
and fed back to the laser controller achieving extremely
precise results. Typical capacitance change in relation
to the amount of electrode removal is shown in the
graphs below.
STIMULUS
POWER SUPPLY &
SIGNAL GENERATOR
VISION SYSTEM
CIRCUIT
(VCO, BAND PASS FILTER
CONTROLLER
LASER BEAM
MEASUREMENT
(SPECTRUM ANALYZER,
FREQUENCY COUNTER,
LASER STATION
Sectional Diagram: Sizes L14 & L15
Sectional Diagram: Sizes L18 & L41
End Terminations
End Terminations
Surface Electrode
Surface Electrode
U.S. PATENT 5264983
Gold Plating
Nickel
Electrode
Ceramic
Gold Plating
Nickel
Electrode
Ceramic
TypicalSeries R esonantFrequency
Trim m ing Effecton C apacitance
10
0%
L15N100
L18L6R5
L18C2R0
L41N210
20%
30%
ESR (Ohms)
Residual Capacitance
10%
40%
50%
60%
70%
80%
L41 CAP
90%
L18 CAP
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
1
0
5
Electrode Area Removed
www.johansontechnology.com
10
15
20
25
Frequency (MHz)
47
LASERTRIM® TypiCal rF CHaraCTerisTiCs
TYPICAL QUALITY FACTOR: L15N100
TYPICAL ESR: L15N100
10
1000
50% Trim, 5.76pF
25% Trim, 8.09pF
100% Trim, 2.19pF
ESR (Ohms)
0% Trim, 12.36pF
Q 100
10
500
1000
Frequency (MHz)
1500
2000
0
500
TYPICAL QUALITY FACTOR: L18C2R0
1000
Frequency (MHz)
0% Trim, 2.10pF
50% Trim, 1.27pF
0% Trim, 2.10pF
50% Trim, 1.27pF
25% Trim, 1.55pF
100% Trim, 0.48pF
25% Trim, 1.55pF
100% Trim, 0.48pF
ESR (Ohms)
Q
100
2000
1
0.1
0
500
1000
Frequency (MHz)
1500
2000
0
500
TYPICAL QUALITY FACTOR: L18L6R5
1000
Frequency (MHz)
1500
2000
TYPICAL ESR: L18L6R5
1000
10
0% (7.2 pF)
50% (4.1 pF)
0% (7.2 pF)
50% (4.1 pF)
25% (5.6 pF)
100% (1.2 pF)
25% (5.6 pF)
100% (1.2 pF)
ESR (Ohms)
100
Q
10
1
0.1
0
500
1000
Frequency (MHz)
1500
2000
0
500
For L41 size electrical characteristics and graphs, please contact the factory.
48
1500
10
1000
1
100% Trim, 2.19pF
TYPICAL ESR: L18C2R0
10000
10
50% Trim, 5.76pF
25% Trim, 8.09pF
1
0.1
0
0% Trim, 12.36pF
www.johansontechnology.com
1000
Frequency (MHz)
1500
2000
MeCHaniCal CHaraCTerisTiCs
L14 (EIA 0603)
SIZE
(mm)
Inches
.058 ±.008
.032 ±.008
.025 MAX
.004 MIN
.005 MAX
.012 MAX
L
W
T
x&y
E/B
E/B*
(1.47 ±.20)
(0.81 ±.20)
(0.64 MAX)
(0.10 MIN)
(0.13 MAX)
(0.30 MAX)
L15 (EIA 0805)
L18 (EIA 1206)
(mm)
Inches
.080 ±.008
(2.00 ±.20)
.050 ±.008
(1.27 ±.20)
.025 ±.005
(0.64 ±.13)
.004 MIN
(0.10 MIN )
.005 MIN
(0.13 MIN )
N/A (L14 Only)
(mm)
Inches
.122 ±.008
(3.09 ±.20)
.060 ±.008
(1.52 ±.20)
.025 ±.005
(0.64 ±.13)
.004 MIN
(0.10 MIN )
.005 MIN
(0.13 MIN )
N/A (L14 Only)
Top View
L41 (EIA 1210)
(mm)
Inches
.130 ±.008
(3.30 ±.20)
.100 ±.008
(2.54 ±.20)
.025 ±.005
(0.64 ±.13)
.004 MIN
(0.10 MIN )
.005 MIN
(0.13 MIN )
N/A (L14 Only)
Side View
Bottom View
W
T
y
x
L
E/B
E/B*
eleCTriCal CHaraCTerisTiCs
TEMPERATURE COEFFICIENT:
DISSIPATION FACTOR:
INSULATION RESISTANCE:
DIELECTRIC STRENGTH:
TEST PARAMETERS:
ENVIRONMENTAL:
50 Volts DC
0 ± 30ppm /°C, -55 to 125°C
.001 (0.1%) max, 25°C
> 10 GΩ @ 25°C,WVDC;
125°C IR is 10% of 25°C rating.
2.5 X WVDC, 25°C, 50 mA max
1MHz ±50kHz, 1.0±0.2 VRMS, 25°C
Meets the mechanical & environmental
characteristics as given for the JTI SSeries capacitors (see second page of
S-Series specification sheet), except
terminal adhesion for all sizes is > 2.0 lbs.
1.0%
Capacitance Change
WORKING VOLTAGE:
0.5%
0.0%
-0.5%
-1.0%
-55
-30
-5
20
45
70
95
120
Temperature (°C)
How To order
500
L41
VOLTAGE
CASE SIZE
See Chart
Standard Voltage:
500 =
50 V
DIELECTRIC
L = NPO
C = HI-Q NPO
N, M = RoHS
NPO
S = RoHS Hi-Q
NPO
N
210
X
PRE-TRIM CAPACITANCE
TOLERANCE
TERMINATION
Initial
capacitance
tolerance is
+25% -0%
G = Gold flashed
Nickel Barrier
1st two digits are significant; third
digit denotes number of zeros, R =
decimal point.
2R0 = 2.0 pF
210 = 21 pF
G
MARKING
Part marking not
available this series
www.johansontechnology.com
T
4
TAPE MODIFIER
Tape
Code
T
R
Tape
Type
Paper
Paper
Reel
Size
7”
13”
Tape specs. per EIA RS481.
49
gBBl BroadBand single layer CapaCiTors
Key FeaTures
•
•
•
•
•
•
GBBL Dielectric Yields High Volumetric Efficiency
Stable Temperature Coefficient: ±15% Max (-55°C to 125°C)
Reduced Microphonics
Offered With or Without Borders
Thin Film TiW/Au or TiW/Ni/Au Electrodes
RoHS
Custom sizes are available - Consult Factory.
Conductive
Electrode
GBBL
TYPICAL
Conductive
Grain Region
Insulating Grain
Boundary Only
Insulating
Grains
Johanson Technology’s new “GBBL” microwave capacitor features high capacitance per case size without sacrificing
the temperature stability associated with high dielectric constant materials. GBBL capacitors feature a proprietary
X7R composition which is manufactured by a two step, atmospheric controlled sintering process. The resulting microstructure is composed of a conducting titanate ceramic grain in contact with an insulating Grain Boundary Barrier
Layer (GBBL). The insulating boundary layer acts as a very thin dielectric. The process control of the boundary
thickness, in conjunction with the conductive grain size, provides the cumulative effect of a very high, yet stable,
dielectric constant.
dieleCTriC CHaraCTerisTiCs
VOLTAGE RATING:
DISSIPATION FACTOR:
AVAILABLE CAPACITANCE:
2.5 X WVDC Min., 50 mA max
1kHz ±50Hz, 1.0±0.2 VRMS, 25°C
10 GΩ Typ.
DIELECTRIC STRENGTH:
±15%, -55 to 125°C
16 - 50 VDC
.025 (2.5%) max
68 pF - 3900 pF
TEMPERATURE COEFFICIENT:
TEST PARAMETERS:
INSULATION RESISTANCE:
GBBL-SLC TEMPERATURE COEFFICIENT
40%
Capacitance Change
20%
0%
-20%
GBBL (±15%)
Y (+22% -82%)
-40%
-60%
-80%
-55
50
B
-35
-15
5
25
45
65
Temperature (°C)
85
105
www.johansontechnology.com
125
size & CapaCiTanCe seleCTion
T
w’
B
Top View
Top View
L
Side View Style V
L
T
Side View Style U
W
W
Border Style “U” Configuration
BORDER
U
V, B
SIZE
W
U
V, B
(mm)
In
L
(mm)
T
(mm)
B
(mm)
In
In
Capacitance
pF
Code
75
750
82
820
100
101
120
121
150
151
220
221
270
271
330
331
390
391
470
471
560
561
680
681
750
751
820
821
1000
102
1200
122
1500
152
1800
182
2200
222
2700
272
3300
332
3900
392
U
02
.015 ±.005
(0.38 ±.13)
.015 ±.005
(0.38 ±.13)
.007 ± .002
(0.18 ± .05)
n/a
.002±.001”
(0.05±.03)
V01
U01
B01
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
25V
25V
25V
16V
16V
16V
16V
16V
16V
Side View Style B
Border Style “V” & “B” Configuration
01
In
T
w’
U
03
.025 ±.005
(0.64 ±.13)
.025 ±.005
(0.64 ±.13)
.007 ± .002
(0.18 ± .05)
n/a
.002±.001”
(0.05±.03)
V02
U02
B02
50V
50V
50V
25V
25V
16V
16V
16V
16V
V, B
50V
50V
50V
25V
25V
16V
16V
16V
16V
04
.035 ±.005
(0.89 ±.13)
.035 ±.005
(0.89 ±.13)
.007 ± .002
(0.18 ± .05)
n/a
002±.001”
(0.05±.03)
V03
U03
B03
50V
50V
25V
25V
16V
16V
16V
V, B
50V
50V
25V
25V
16V
16V
16V
.050 ±.010
(1.27 ±.25)
.050 ±.010
(1.27 ±.25)
.007 ± .002
(0.18 ± .05)
n/a
.002±.001”
(0.05±.03)
V04
U04
B04
50V
50V
25V
25V
16V
16V
50V
50V
25V
25V
16V
16V
How To order gBBl-slCs
250
V
02
A
471
K
VOLTAGE
CODE
500 = 50 V
250 = 25 V
160 = 16 V
BORDER STYLE
U = No Border
V = Dual Border
B = Single Border
CASE SIZE
See
Size Chart
DIELECTRIC
A = GBBL
Dielelectric
CAPACITANCE
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
471 = 470 pF
122 = 1200 pF
TOLERANCE
K = ± 10%
M = ± 20%
Z = + 20%
-80%
www.johansontechnology.com
N
TERMINATION
N = TiW/Ni/Au
T = TiW/Au
MARKING
4 = No mark
4
W
PACKAGING
G = Gel-Pak
R = 6” Ring
S = Vial Pack / Bulk
W = Conductive
Waffle Trays
51
slC MiCrowave / MilliMeTerwave CapaCiTors
Key FeaTures
• Ceramic SLC Low Profile Devices Exhibit Very
High-Q / Low Insertion Loss, SRFs to 50 GHz
• Thin Film Gold Electrodes Provide Superior Wire
Bonding & Die Attach Performance
• Four SLC Device Types to Fit Many Applications:
Standard (Die) SLCs
Bar SLC Arrays
Border SLCs
Custom SLC Products
• RoHS - Available on all dielectrics
• Custom sizes are available - please consult factory
APPLICATIONS
• Microwave Integrated Components
• GaAs Integrated Circuits
• RF/Microwave Components
• DC Block, Bypass, Tuning
dieleCTriC CHaraCTerisTiCs
52
DIELECTRIC
CODE CONSTANT (K)
TEMPERATURE
COEFFICIENT
TEMPERATURE
RANGE
DISSIPATION
FACTOR / FREQ.
C
23
K
37
N
80
U
V
INSULATION
RESISTANCE
0 ± 30 ppm
-55°C to +125°C
< 0.15%/1MHz
> 1000 GΩ
1
B,C,D ( A, <2pF)
0 ± 30 ppm
-55°C to +125°C
< 0.15%/1MHz
> 1000 GΩ
1
B,C,D ( A, <2pF)
0 ± 30 ppm
-55°C to +125°C
< 0.15%/1MHz
> 1000 GΩ
1
B,C,D ( A, <2pF)
(F - K, >10 pF)
120
-750 ± 120 ppm
-55°C to +125°C
< 0.25%/1MHz
> 1000 GΩ
1
J,K (B-D)
160
-1500 ± 500 ppm
-55°C to +125°C
< 0.25%/1MHz
> 1000 GΩ
1
J,K (B-D)
R
280
-2200 ± 500 ppm
-55°C to +125°C
< 0.25%/1MHz
> 1000 GΩ
1
J,K (B-D)
L
350
-3300 ± 500 ppm
-55°C to +125°C
< 1.50%/1MHz
> 1000 GΩ
1
J,K,M (B-D)
D
600
± 10%
-55°C to +125°C
< 2.50%/1kHz
> 100 GΩ
2
K,M
B
1200
± 10%
-55°C to +125°C
< 2.50%/1kHz
> 100 GΩ
2
K,M
W
2000
± 15%
-55°C to +125°C
< 2.50%/1kHz
> 100 GΩ
2
K,M
X
2700
± 15%
-55°C to +125°C
< 2.50%/1kHz
> 100 GΩ
2
K,M
T
4000
± 15%
-55°C to +125°C
< 2.50%/1kHz
> 100 GΩ
2
K,M
Z
8000
+22% -56%
+10°C to +85°C
< 4.00%/1kHz
> 10 GΩ
2
M,Z
Y
12000
+22% -82%
-30°C to +85°C
< 4.00%/1kHz
> 10 GΩ
2
M,Z
VOLTAGE RATINGS:
50 &100 WVDC
DIELECTRIC STRENGTH:
2.5 x WVDC min, 25°C, 50 mA max
TEST CONDITIONS:
1) All Values: 1.0±0.2 VRMS @1MHz, 25°C
2) Values ≤100pF: Cond.1; Values >100pF: 1.0±0.2 VRMS @1KHZ, 25°C
www.johansontechnology.com
TEST
COND.
AVAILABLE
TOLERANCES
v-series & B-series Border slC CapaCiTors
Recessed SLC electrode borders help prevent shorting from conductive epoxy squeeze-up and aid visual
recognition equipment. The V-Series SLCs feature dual borders (top & bottom) while the B-Series SLCs feature
a single border (top-only.)
v-series & B-series CapaCiTanCe seleCTion
CAP.
CODE
VALUE
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
0.1 pF
0.2 pF
0.3 pF
0.4 pF
0.5 pF
0.6 pF
0.7 pF
0.8 pF
0.9 pF
1.0 pF
1.1 pF
1.2 pF
1.3 pF
1.4 pF
1.5 pF
1.6 pF
1.7 pF
1.8 pF
1.9 pF
2.0 pF
2.1 pF
2.2 pF
2.4 pF
2.7 pF
3.0 pF
3.3 pF
3.6 pF
3.9 pF
4.3 pF
4.7 pF
5.1 pF
5.6 pF
6.2 pF
6.8 pF
V10
V12
V15
C
N
N
V
V
V
V
R
R
R
R
L
L
L
L
D
D
D
D
D
D
D
D
D
B
B
B
B
B
B
B
B
W
W
C
K
N
N
N
V
V
V
V
V
R
R
R
R
R
R
R
L
L
L
L
L
L
D
D
D
D
D
D
B
B
B
B
B
C
C
K
N
N
N
V
V
V
V
V
V
R
R
R
R
R
R
L
L
L
L
L
L
D
D
D
D
D
D
D
B
B
B
100V
100V
100V
V20
V25
100V
100V
C
C
K
K
K
N
N
N
N
N
N
N
N
V
V
V
V
V
V
V
V
V
V
L
L
L
L
L
L
L
L
D
D
C
C
C
K
K
K
K
K
N
N
N
N
N
N
N
N
N
N
N
V
V
V
V
V
V
V
R
R
R
R
R
R
V30
100V
C
C
C
C
C
K
K
K
K
K
K
K
K
K
N
N
N
N
N
N
N
N
N
V
V
V
V
V
V
V
V40
100V
V50
CAP.
100V
CODE
VALUE
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
K
N
N
N
6R8
7R5
8R2
9R1
100
120
150
180
200
220
270
330
390
470
500
510
560
680
820
101
121
151
181
201
221
271
331
391
471
561
681
821
102
122
6.8 pF
7.5 pF
8.2 pF
9.1 pF
10 pF
12 pF
15 pF
18 pF
20 pF
22 pF
27 pF
33 pF
39 pF
47 pF
50 pF
51 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
200 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1200 pF
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
K
K
N
N
N
N
N
N
N
V
V
V10
V12
V15
V20
V25
V30
V40
V50
W
W
W
W
X
X
T
T
T
Z
Z
Y
Y
Y
Y
Y
Y
B
B
W
W
W
W
X
X
T
T
T
Z
Z
Z
Y
Y
Y
Y
Y
B
B
B
B
W
W
W
X
X
X
T
T
Z
Z
Z
Z
Z
Y
Y
Y
D
D
D
D
D
B
B
B
B
B
W
W
X
X
X
T
T
T
Z
Z
Z
Y
Y
Y
Y
R
L
L
D
D
D
D
D
B
B
B
B
W
W
W
X
X
X
T
T
T
Z
Z
Z
Y
Y
Y
V
R
R
R
L
L
L
D
D
D
D
B
B
B
B
B
B
W
W
X
X
T
T
T
Z
Z
Y
Y
Y
Y
V
V
V
V
V
R
R
R
L
L
D
D
D
D
D
D
B
B
B
W
W
X
T
T
T
T
Z
Z
Z
Y
Y
N
N
N
N
V
V
V
R
R
R
L
L
L
D
D
D
D
D
D
B
B
W
W
X
X
X
T
T
T
Z
Z
Y
Y
Y
100V
100V
100V
100V
100V
100V
100V
100V
Color breaks used to highlight changes in dielectric material, letters indicate the specific material.
v-series & B-series MeCHaniCal CHaraCTerisTiCs
w’
B
Top View
L
Side View Style V
w’
(mm)
V10
V12
V15
V20
V25
V30
V40
.010
.012
.015
.020
.025
.030
.040
(0.25)
(0.30)
(0.38)
(0.51)
(0.64)
(0.76)
(1.02)
V50
.050
(1.27)
NOM.
.007
.008
.011
.016
.020
.026
.036
.044
(mm)
(0.17)
(0.20)
(0.28)
(0.41)
(0.51)
(0.66)
(0.91)
(1.12)
T
B
±.001”
Side View Style B
T
±.002”
w’
W
T
SIZE
W&L ±.001”
(mm)
(mm)
*Min Border 0.0005”
.001*
(0.025)*
.001*
(0.025)*
.002
(0.051)
.002
(0.051)
.002
(0.051)
.002
(0.051)
.002
(0.051)
.003
(0.076)
NOM. 0.004” ~ 0.008”
(NOM. 0.10 ~ 0.20)
Contact factory for other sizes, values or configurations
www.johansontechnology.com
53
u-series sTandard single layer CapaCiTors
SIZE
W
Top View
Top View
L
L
(mm)
+.001”
-.003”
U10
U12
U15
U20
U25
U30
U35
U50
U70
.010
.012
.015
.020
.025
.030
.035
.050
.070
(0.25)
(0.30)
L
MAX.
.012
T
(mm)
(0.30)
(0.38)
T
±.002”
(mm)
.015
(0.38)
(0.51)
.020
.025
(0.51)
T
(0.76)
.030
(0.64)
(0.89)
.035
(0.76)
(1.27)
.040
(0.89)
(1.78)
.060
(1.02)
.080
(1.52)
(2.03)
.090
(2.29)
.100
(2.54)
NOM. 0.004” ~ 0.008”
Side View Style U
W
(0.64)
U90
(NOM. 0.10 ~ 0.20)
Contact factory for other sizes, values or configurations
Side View Style U
W
CAPACITANCE
CODE
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
VALUE
0.1 pF
0.2 pF
0.3 pF
0.4 pF
0.5 pF
0.6 pF
0.7 pF
0.8 pF
0.9 pF
1.0 pF
1.1 pF
1.2 pF
1.3 pF
1.4 pF
1.5 pF
1.6 pF
1.7 pF
1.8 pF
1.9 pF
2.0 pF
2.1 pF
2.2 pF
2.4 pF
2.7 pF
3.0 pF
3.3 pF
3.6 pF
3.9 pF
4.3 pF
4.7 pF
5.1 pF
5.6 pF
6.2 pF
6.8 pF
7.5 pF
8.2 pF
9.1 pF
10 pF
U10 U12
50V
C
K
N
N
U
V
V
V
R
R
R
R
R
L
L
L
L
L
L
D
D
D
D
D
D
D
D
B
B
B
B
B
B
B
W
W
W
X
U15
U20
U25
50V
50V
100 V
50V
100 V
C
K
N
N
N
N
U
V
V
V
V
V
V
V
R
R
R
R
R
L
L
L
L
L
L
D
D
D
D
D
D
D
B
B
B
B
B
C
K
K
K
N
N
N
N
N
N
N
U
U
U
U
U
V
V
V
V
V
R
R
R
R
R
R
L
L
L
D
D
D
D
D
D
C
K
K
N
N
N
N
U
U
V
V
V
V
V
V
V
R
R
R
R
R
R
L
L
L
L
L
D
D
D
D
D
D
D
B
B
B
C
C
C
K
K
K
K
K
N
N
N
N
N
N
N
N
N
N
U
U
U
U
V
V
V
V
R
R
R
R
R
R
L
L
L
C
C
K
K
K
N
N
N
N
N
N
N
N
U
U
U
U
U
V
V
V
V
V
R
R
R
R
R
R
L
L
L
D
D
D
D
U50 U70 U90
CAPACITANCE
50V
100V
100V
100V
100V
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
K
K
N
N
N
N
N
N
N
U
U
U
V
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
K
N
N
N
N
N
N
N
N
N
U
U
V
V
V
V
R
R
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
N
N
N
N
N
N
N
N
N
N
V
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
N
N
N
C
C
C
C
C
C
C
C
K
K
K
K
K
N
N
CODE
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
U30
50V
100 V
C
C
C
C
K
K
K
K
K
K
K
K
N
N
N
N
N
N
N
N
N
U
U
U
U
V
V
V
R
R
R
R
R
C
C
C
K
K
K
K
K
N
N
N
N
N
N
N
N
N
N
U
U
U
U
V
V
V
V
R
R
R
R
R
L
L
L
L
U35
50V
100 V
C
C
C
C
C
K
K
K
K
K
K
K
K
K
K
N
N
N
N
N
N
N
U
U
U
V
V
V
V
R
C
C
C
K
K
K
K
K
K
N
N
N
N
N
N
N
N
N
N
U
U
U
V
V
V
V
V
R
R
R
R
L
Color breaks used to highlight changes in dielectric material, letters indicate the specific material
54
www.johansontechnology.com
VALUE
0.1 pF
0.2 pF
0.3 pF
0.4 pF
0.5 pF
0.6 pF
0.7 pF
0.8 pF
0.9 pF
1.0 pF
1.1 pF
1.2 pF
1.3 pF
1.4 pF
1.5 pF
1.6 pF
1.7 pF
1.8 pF
1.9 pF
2.0 pF
2.1 pF
2.2 pF
2.4 pF
2.7 pF
3.0 pF
3.3 pF
3.6 pF
3.9 pF
4.3 pF
4.7 pF
5.1 pF
5.6 pF
6.2 pF
6.8 pF
7.5 pF
8.2 pF
9.1 pF
10 pF
u series slC CapaCiTanCe seleCTion (ConT.)
CAPACITANCE
CODE VALUE
100
10 pF
120
12 pF
150
15 pF
180
18 pF
200
20 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
500
50 pF
510
51 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
201
200 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102 1000 pF
122 1200 pF
152 1500 pF
182 1800 pF
202 2000 pF
252 2500 pF
402 4000 pF
U10 U12
50V
X
X
T
T
T
T
Z
Z
Z
Y
Y
Y
Y
50V
B
W
W
W
X
X
T
T
T
Z
Z
Z
Z
Z
Y
Y
U15
50V
D
B
B
B
W
W
W
X
X
T
T
T
T
Z
Z
Z
Y
Y
Y
U20
100 V
B
B
W
W
W
X
X
T
T
T
Z
Z
Z
Z
Y
Y
Y
50V
L
D
D
D
D
B
B
B
W
W
W
W
X
X
T
T
T
Z
Z
Z
Y
Y
Y
U25
100 V
D
D
B
B
B
B
W
W
X
X
X
X
T
T
Z
Z
Z
Y
Y
Y
Y
50V
R
L
L
D
D
D
D
B
B
B
B
B
B
W
W
X
T
T
T
Z
Z
Z
Y
Y
Y
Y
100 V
L
D
D
D
D
B
B
B
W
W
W
W
X
X
T
T
T
Z
Z
Z
Z
Y
Y
U30
50V
R
R
R
L
L
L
D
D
D
D
B
B
B
B
B
W
W
X
T
T
T
T
Z
Z
Z
Y
Y
U35
100 V
L
L
L
D
D
D
D
B
B
B
B
B
W
W
X
X
T
T
T
Z
Z
Z
Z
Y
Y
50V
V
V
R
R
R
R
L
L
D
D
D
D
D
B
B
B
W
W
W
X
X
T
T
T
Z
Z
Z
Y
Y
U50 U70 U90
100V
R
R
L
L
D
D
D
D
B
B
B
B
B
W
X
X
X
X
T
T
T
Z
Z
Z
Y
Y
Y
100V
V
V
V
V
R
R
R
L
L
D
D
D
D
D
B
B
B
B
W
W
W
X
X
T
T
T
Z
Z
Z
Y
Y
100V
N
N
N
V
V
V
V
R
R
R
R
R
R
L
D
D
D
B
B
B
B
W
W
X
X
T
T
T
T
Z
Y
Y
Y
Y
100V
N
N
N
N
N
N
U
U
V
V
V
R
R
R
R
L
D
D
D
B
B
B
W
W
W
X
X
X
T
T
Z
Z
Z
Y
Y
CAPACITANCE
CODE
100
120
150
180
200
220
270
330
390
470
500
510
560
680
820
101
121
151
181
201
221
271
331
391
471
561
681
821
102
122
152
182
202
252
402
VALUE
10 pF
12 pF
15 pF
18 pF
20 pF
22 pF
27 pF
33 pF
39 pF
47 pF
50 pF
51 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
200 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1200 pF
1500 pF
1800 pF
2000 pF
2500 pF
4000 pF
Color breaks used to highlight changes in dielectric material, letters indicate the specific material
How To order u, v, & B series
500
VOLTAGE
CODE
500 = 50 V
101 = 100 V
U
15
N
1R0
CASE SIZE
See
Mechanical
Characteristics
DIELECTRIC
See
Dielectric
Selection
CAPACITANCE
1st two digits are
significant; third digit
denotes number of
zeros, R denotes
decimal point.
R05 = .05 pF
2R0 = 2.0 pF
210 = 21 pF
101 = 100 pF
CHIP STYLE
U = Standard SLC
B = Single Border SLC
V = Dual Border SLC
B
TOLERANCE
**A= ± 0.05 pF
*B = ± 0.10 pF
*C = ± 0.25 pF
*D = ± 0.50 pF
F = ± 1%
G = ± 2%
J = ± 5%
K = ± 10%
M = ± 20%
*Values < 10 pF
**Values ≤ 2 pF
T
TERMINATION
N = TiW/Ni/Au
T = TiW/Au
MARKING
4 = No marking
Available
4
W
PACKAGING
G = Gel-Pak
R = 6” Ring
S = Vial Pack / Bulk
W = Conductive
Waffle Trays
Consult factory for
special packaging or
quantity per package
requests.
NOTE: The “U” series thick-film terminated SLC’s are fully supported and orders may be placed using legacy part numbers.
These parts are identified by alpha case size code and contain termination codes “G” or “9” i.e. 500UDDB200JG4W.
www.johansontechnology.com
www.johansontechnology.com
55
slC TeMperaTure CHaraCTerisTiCs
40%
30%
Capacitance Change
20%
10%
0% L (-3300±500ppm)
U (-750±100ppm)
R (-2200±500ppm)
C, K, N (0ppm)
V (-1500±300ppm)
3
-10%
-20%
-30%
-40%
-55
-35
-15
5
25
45
65
85
105
125
Temperature (°C)
10%
Capacitance Change
5%
T (± 15%)
B (± 10%)
D (± 10%)
W (±10%)
X (± 10%)
0%
-5%
-10%
-15%
-55
-35
-15
5
25
45
65
85
Temperature (°C)
56
www.johansontechnology.com
105
125
slC TeMperaTure CHaraCTerisTiCs
J
0%
Capacitance Change
-20%
-40%
-60%
-80%
-100%
-35
Y (+22% -82%)
Z (+22% -56%)
J
-25
-15
-5
5
15
25
35
45
55
65
75
85
Temperature (°C)
MeTallizaTion CHaraCTerisTiCs For gBBl / slC
METALLIZATION TYPE
TiW/Au (Titanium-Tungsten/Gold)
TiW/Ni/Au (Titanium-Tungsten/Nickel/Gold)
TERMINATION CODE
T
N
ATTACHMENT
COMPATIBILITY
Wire / Ribbon Bonding
Silver or Gold Conductive Epoxy
Au/Ge or Au/Si Eutectic Preform
Excellent High Temperature
Resistance (400°C)
Unsuitable for Pb/Sn or Au/Sn Soldering
Pb/Sn or Au/Sn Soldering
Au/Sn Eutectic Preform
Moderate High Temp. Resistance (325°C)
Long term high temperature may cause Ni
diffusion and wire bond problems on Au/Ge
SLC thick-film terminations ( legacy codes “G” and “9”) are still supported. Contact the factory for compatibility information.
environMenTal CHaraCTerisTiCs For gBBl / slC
BOND STRENGTH:
SHEAR STRENGTH:
SOLDER HEAT RESISTANCE:
SOLDERABILITY:
SHOCK:
THERMAL SHOCK:
Exceeds MIL-S-883, Meth. 2011
Exceeds MIL-S-883, Meth. 2019
MIL-S-202, Meth. 210-C, (260±5°C, 5 sec.)
MIL-S-202, Meth. 208, (245±5°C, 5 sec.)
MIL-S-202, Meth. 213-I, (100g, 6 msec.)
MIL-S-202, Meth. 107, A, (-55 to +125°C)
VIBRATION: MIL-S-202, Meth. 204-G, (30g, 10-2000 Hz)
BURN-IN/LIFE TEST:
LOW VOLTAGE HUMIDITY:
BAROMETRIC PRESSURE:
IMMERSION/SALT SPRAY:
MOISTURE RESISTANCE:
www.johansontechnology.com
MIL-S-202, Meth. 108, A/F
Mil-C-49464, Para. 3.17
MIL-S-202, Meth. 105, B
MIL-S-202, Meth. 104, B
MIL-S-202, Meth. 106
57
CusToM suBsTraTes & THin FilM produCTs
Johanson Technology offers a wide range
of dielectrics for use in application specific
environments. These materials are available
both lapped and “as fired” condition as well
as metalized and non-metalized substrates.
Standard substrate sizes range from 0.50” x
0.50” to 1.50” x 1.50”, with larger sizes available
with special order . Dielectrics are available from
0.005” to 0.050” thick.
Metalized substrates may also be patterned to
customer specifications by chemical etching, abrasive
etching, or pattern plating. Please contact the factory
for other types of metallization configurations other than
a continuous top / bottom plating. Other termination
material thicknesses are available upon request.
SUBSTRATE
MATERIAL
ALN
*
Alumina *
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
Titanate Based
58
MATERIAL
CODE
K
F
G
C
K
N
U
V
R
L
D
B
W
X
T
Z
Y
8.8
9.9
23
37
80
120
160
280
350
600
1200
2000
2700
4000
8000
12000
METALIZATION
CODE
TiW / Au
TiW / Ni / Au
TiW / Ni / Sn
TaN / TiW / Au
TiW / Ni / Cu / Ni / Au
80Au / 20 Sn
Non-Metallized
T
N
V
R
C
E
X
Note: When metallization is requested on
both top and bottom sides, the metallization
will wrap around the sides as a standard
unless otherwise specified.
TEMPERATURE
COEFFICIENT
170 W/M deg K (Th. Cond.)
P120 +/- 30 ppm / deg C
0 +/- 30 ppm / deg C
0 +/- 30 ppm / deg C
0 +/- 30 ppm / deg C
-750 +/- 120 ppm / deg C
-1500 +/- 300 ppm / deg C
-750 +/- 120 ppm / deg C
-750 +/- 120 ppm / deg C
+/- 10% (-55 to +125 C)
+/- 10% (-55 to +125 C)
+/- 10% (-55 to +125 C)
+/- 15% (-55 to +125 C)
+/- 15% (-55 to +125 C)
+22/-56% (+10 to +85 C)
+22/-82% (-30 to +85 C)
OPERATING
TEMPERATURE
DISSIPATION
FACTOR
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
-55 to +125 deg. C
< 0.15% @ 1 MHz
< 0.15% @ 1 MHz
< 0.15% @ 1 MHz
< 0.25% @ 1 MHz
< 0.25% @ 1 MHz
< 0.25% @ 1 MHz
< 1.50% @ 1 MHz
< 2.50% @ 1 kHz
< 2.50% @ 1 kHz
< 2.50% @ 1 kHz
< 2.50% @ 1 kHz
< 2.50% @ 1 kHz
< 4.00% @ 1 kHz
< 4.00% @ 1 kHz
www.johansontechnology.com
FLATNESS (Standard): 1 mil per 100 mils.
Please contact the factory for other flatness
options.
NOTE: The thickness specified in the JTI
part number is the thickness of the dielectric
material not including the termination
materials.
W
NOTE: The standard thickness of the Nickel
barrier (if used) is 10 - 20 microinches
(for non-bordered parts) and is 20 - 50
microinches (for bordered parts), and the
thickness of the Gold is 100 microinches
minimum. Other termination material
thicknesses are available upon request.
L
T
Optional Metallization,
Top, Bottom, or Both Sides
How To order
500
M
VOLTAGE CODE
1st two digits are
significant; third digit
denotes number of
zeros, R denotes
decimal point.
6R0 = 6VDCW
250 = 25 VDCW
101 = 100 VDCW
501 = 500 VDCW
102 = 1000 VDCW
502 = 5000 VDCW
PART TYPE
M = Substrate
SIZE CODES
Use size codes
for dimension
CODE DIM.
M10 = 1.0” x 1.0”
M12 = 1.2” x 1.2”
M15 = 1.5” x 1.5”
M20 = 2.0” x 2.0”
etc...
12
T
045
DIELECTRIC CODE
A = NPO/COG
B = BX/X7R
C = NPO
D = BX
F = ALUMINUM
NITRIDE
G = ALUMINA
K = NPO
L = NEG TC
N = NPO
Q = P90/Hi Q
R = NEG TC
T = X7R
U = NEG TC
V = NEG TC
W = X7R
X = X7R
Y = Y5V
Z = Z5U
THICKNESS
CODE
Thickness in mils
3rd digit is the
decimal point
eg: 050 = 5.0 mils
eg: 065 = 6.5 mils
eg: 128 = 12.8 mils
K
G
GS = Back side
metalization code
X = Unterminated
9 = Thick film
G = Thick film + Au
H = Thick film + Ni-Au
T = Thin Film TiW-AU
N = Thin Film TiW-NI-AU
R = TaN-TiW-Au
V = TiW-Ni-Sn
E = 80Au/20Sn
C = TiW-Ni-Cu-Ni-Au
S = Special
METALIZATION
A or Blank = Not applicable
S = Seed layer gold only
P = 100 micro” min. std
X = Special
Use blank in the S column
instead of “A” only if it the
last character in the part#
THICKNESS
TOLERANCE
CODE
S
R
-
RT = Top side
metalization code
X = Unterminated
9 = Thick film
G = Thick film + Au
H = Thick film + Ni-Au
T = Thin Film TiW-AU
N = Thin Film TiW-NI-AU
R = TaN-TiW-Au
V = TiW-Ni-Sn
E = 80Au/20Sn
C = TiW-Ni-Cu-Ni-Au
S = Special
Blank = Both Sides are the
Same
T
***
-
AA
NON-STANDARD CODE
Defines non-standard
product marking, leading, testing, dielectric,
cust, code, non-std. thk.,
L, W, endband & size
codes,etc...
*** - ASTERISK
Required (place
holders)
METALIZATION
A or Blank = Not applicable
S = Seed layer gold only
P = 100 micro” min. std
X = Special
Leave R and T blank if both
sides have the same type
metalization.
If metalization types are
different, then back side is
scribed with an X.
A = ± 0.5 mil
B = ± 1.0 mil
C = ± 2.0 mil
J = ± 5.0 %
K = ± 10.0 %
L = ± 15.0 %
M = ± 20.0 %
X = Special
www.johansontechnology.com
59
CHip CapaCiTor paCKaging inForMaTion
Johanson capacitors are available taped per EIA standard 481. Tape options include 5”, 7” and 13” diameter reels.
Johanson uses high quality, dust free, punched 8mm paper tape and plastic embossed 8mm tape for thicker MLCs.
Quantity per reel ranges are listed in the tables below and are dependent on chip thickness.
Embossed Tape
Punched Tape
Feed Direction
.083 max.
(2.1)
.059+.004-0.0
Sproket Holes
(1.5+0.1-0.0)
.012±.004
(0.3±0.1)
.157±.004
(4.0±0.1)
.079±.020
(2.0±0.5)
Bo
.055 max.
.067±.004
(1.7±0.1) (1.2)
.138±.002
(3.5±0.05)
.315±.008
(8.0±0.2)
Ao
1.97 min.
(50.0)
.083±.020
(21±0.5)
.510±.020
(13±0.5)
Cover Tape
.098 max.
(2.5)
.157±.004
(4.0±0.1)
.079±.002
(2.0±0.05)
2.34±0.10
Sproket Holes
.059+.004-0.0
.157±.004
.012±.004
(0.3±0.1)
(1.5+0.1-0.0)
(4.0±0.1)
Ao
.33+.059-0.0
or .488+.078-0.0
(8.4+1.5-0.0) (12.4+2.0-0.0)
5” DIA. REEL SIZE
TYPE / SIZE
R05 / 0201
R07 / 0402
R14 / 0603
R15 / 0805
S42 / 1111
S48 / 2525
S58 / 3838
LASERtrim® (All)
.320±.004
(8.0±0.1)
7” DIA. REEL SIZE
.079±.002
(2.0±0.05)
13” DIA. REEL SIZE
REEL
QUANTITY
TAPE
TYPE
TAPE
CODE
REEL
QUANTITY
TAPE
TYPE
TAPE
CODE
REEL
QUANTITY
TAPE
TYPE
TAPE
CODE
500
500
500
500
500
N/A
N/A
500
Paper
Paper
Paper
Embossed
Embossed
Y
Y
Y
Z
Z
Paper
Y
15,000
10,000
4,000
4,000
2,000
250
250
4.5-5.0K
Paper
Paper
Paper
Embossed
Embossed
Embossed
Embossed
Paper
T
T
T
E
E
E
E
T
50,000
N/A
10,000
10,000
10,000
1,000
1,000
15,000
Paper
N/A
Paper
Embossed
Embossed
Embossed
Embossed
Paper
R
N/A
R
U
U
U
U
R
SUBSTRATES – DEPENDS ON SIZE, TYPICAL IS 10/BOX; CAP ARRAYS - 100/TRAY
SINGLE LAYER CAPACITORS - UP TO 50 MIL, 400/WAFFLE PACK; > 50 MIL, 100/WAFFLE PACK
SLC’S CAN ALSO BE MOUNTED ON GRIP RINGS AND GELPAKS© AND SHIPPED IN BULK
CUSTOM PACKAGING AND QUANTITIES ARE AVAILABLE, CONTACT THE FACTORY FOR OPTIONS
PLEASE VISIT OUR WEB SITE FOR RF CERAMIC COMPONENT PACKAGING INFORMATION.
60
.067±.004
(1.7±0.1)
.220±.004
(5.5±0.1)
.472±.008
(12.0±0.2)
Bo
7.0±.079
13.0±.079
(178±2.0)or (330±2.0)
Cover Tape
www.johansontechnology.com
CHip induCTor paCKaging inForMaTion
Reel Dimensions (Unit: mm)
7” DIA. REEL SIZE
TYPE / SIZE
REEL QUANTITY
TAPE TYPE
TAPE CODE
L-05 / 0201
15, 000
Paper
T
L-07 / 0402
10,000
Paper
T
L-14 / 0603
4,000
Paper
T
L-15 / 0805
4,000
Embossed
E
1.2±0.2
D:21.8±0.8
178±2.0
60±0.5
D:13.0±0.3
2.0±0.5
9±0.3
11.4±1.0
Tape Dimensions (Unit: mm)
φ1.5 +0.1/-0.0
A’
D
0.2 ± 0.05
1.75 ± 0.1
C
3.5 ± 0.1
8.0 ± 0.2
T
B
TYPE
A
A’
B
C
D
T
L-05
2.0±0.05
4.0±0.1
0.38±0.02
0.68±0.02
2.0±0.05
Max. 0.44
L-07
2.0±0.1
4.0±0.1
0.6±0.1
1.1±0.1
2.0±0.1
Max. 1.0
L-14
4.0±0.1
4.0±0.1
1.0±0.1
1.8±0.1
2.0±0.1
Max 1.3
L-15
4.0±0.1
4.0±0.1
1.6±0.1
2.4±0.1
2.0±0.1
Max 1.3
A
WIREWOUND INDUCTOR PACKAGING INFORMATION
Reel Dimensions
7” DIA. REEL SIZE
φ17
φ60
TYPE / SIZE
REEL QUANTITY
TAPE TYPE
TAPE CODE
L-07 / 0402
L-14 / 0603
10,000
Paper
T
3,000
Embossed
E
L-15 / 0805
2,000
Embossed
E
1.0
W
Tape Dimensions
Ø 1.5
Dimensions (unit: m/m)
2.0
1.75
3.5
8.0
B
TYPE
A
B
F
K
T
W
L-07
0.70
1.20
2.00
-
0.70
8.00
L-14
1.25
1.80
4.00
1.10
0.20
8.00
L-15
1.42
2.26
4.00
1.30
0.20
8.00
A
F
4.0
T
K
www.johansontechnology.com
61
TeCHniCal noTes
The following technical notes are available for viewing on our website at
www.johansontechnology.com/technicalnotes/
GENERAL
• RoHS Compliance
• Technical Question Form
RF CAPACITORS AND INDUCTORS
• Capacitor Mounting & S-Parameters
• Capacitor RF Current & Power
• Dishal Bandpass Filter Tuning Using LASERtrim® Chip Caps
• High Frequency Inductor Modeling Utilizing MLISoft®
• Measuring S-Parameters of High-Q Caps
• Q & ESR Explained
• Reference Oscillator Tuning Using LASERtrim® Chip Caps
• Soldering Requirements for MLCC
• S-Parameter Accuracy
• SRF & PRF for RF Capacitors
• Storage and Solderability Checklist
• Trimming Characteristics of LASERtrim® Chip Caps
• Inductor Marking and Orientation RF Study
RF COMPONENTS
• Antenna Bandwidth Expansion Guide
• Chip Antenna Layout Considerations for 802.11 Applications
• Chip Balun: Definitions & Measurement Methodology
• JTI Chip Antenna Mounting and Tuning Techniques
• Silver Leaded Components’ Storage and Soldering Profile
• 2500AT43A0100 Frequency Tuning
• 2450BM14A0002 Matched Balun for the Nordic nRF24L01/nRF24L01+ Chipsets
• 2450BM15A0002 Matched Balun for T.I. 253X Family Chipsets
RF COMPONENTS
• Chip Tape & Reel Packaging
• Inductor Tape & Reel Packaging New
• RF Antenna Tape & Reel Packaging
• RF Component Tape & Reel Packaging
62
www.johansontechnology.com
www.johanson dielectrics.com
JOHANSON DIELECTRICS, INC.
SYLMAR, CALIFORNIA
X2Y®
EMI Filter Capacitors
High Voltage
Ceramic Capacitors
Switchmode
Ceramic Capacitors
Tanceram®
Ceramic Capacitors
Y1 & Y2 Safety
Certified Capacitors
Radial Leaded
High Voltage MLCCs
High Temperature
Radial Leaded MLCCs
www.amccaps.com
ADVANCED MONOLYTHIC CERAMICS
OLEAN, NEW YORK
Ceramic Planar
Array Filters
Capstrate® Capacitor
Substrate
Discodial EMI Capacitor
www.johansontechnology.com
63
Your Technology Partner
ANTENNA
(DIVERSITY)
LNA
COUPLER
BP FILTER
DIPLEXER
BALUN
PA
BALUN FILTER
LTCC MODULE
DIVIDER
LP FILTER
BP FILTER
CHIP & WIREWOUND
INDUCTORS
BALUN
VCO
DEMOD
MOD.
HIGH CV &
LOW ESR CAPACITORS
Typical Product Applications:
WiFi, WiMax, UWB, Bluetooth, Zigbee, GPS, WCDMA/GSM/GPRS & custom
EUROPE:
UNITED STATES:
HONG KONG:
JOHANSON EUROPE, LTD.
Flackwell Heath,
Bucks, England HP10 9NR
TEL +44 1628 531154 • FAX +44 1628 532703
[email protected]
HEADQUARTERS
4001 Calle Tecate,
Camarillo, California 93012
TEL (805) 389 1166 • FAX (805) 389 1821
http://www.johansontechnology.com
JOHANSON HONG KONG, LTD.
Unit E, 11/F., Phase 1 Kaiser Estate
41 Man Yue St., Hunghom
Kowloon, Hong Kong
TEL +852 2334 6310 • FAX +852 2334 8858
[email protected]
TAIWAN:
SHENZHEN:
JOHANSON HONG KONG, LTD. TAIWAN OFFICE
9F., No.403, Sec. 4, Ren-Ai Road, Da-An District
Taipei, Taiwan (R.O.C.)
TEL +886 2 2775 3312 • FAX +886 2 2775 4832
[email protected]
JOHANSON TRADING (SHENZHEN) CO., LTD.
Room 2303, Changping Business Building, No.99 Honghua Road,
Futian Free Trade Zone, Shenzhen, PRC 518038
TEL +86 755 8348 4609 • FAX +86 755 8348 4613
[email protected]
P/N: S-926 Rev. 050516