HPC SERIES Planar Transformers High Power Planar Chokes for HV Applications Features - High power planar chokes for HEV/EV applications - According AEC-Q200. - High power management - Very good inductance stability versus temperature - Operating frequency up to 250 kHz. - Operating temperature from -40ºC to 125ºC - H class component for operation up to 180°C - Allows assembly in a cold plate through heat sink under request - Improved room area - Possibility of customized outputs - UL94V-0 material - RoHS compliant Application - Automotive DC/DC converters for HEV/EV systems. - Industrial high power SMPS Electrical specifications Part Number Inductance ±10% Freq. (kHz) DCR MAX (mΩ) Current Irms (A) Ripple ∆Ipp (A) Losses @100°C (W) Weight (kg) HPC-001 HPC-002 4µH 2,5µH 100 150 0.6 0.4 120 165 24 30 13 12 0,2 0,2 (*) Dedicated to Full Bridge topology Notes (1) All test data are referenced to 25°C ambient temperature (2) Continuous operating temperature range must be within -40°C/+125°C (ambient + self heating) under worst case conditions; exposure to 180°C peak is allowed. Thermal index H for all raw materials used. (3) Performances are subjected to change according to cooling capability of the cold plate where the component is fixed. It is suggested to test the component at system level to verify its temperature after 30 minutes in the final application. (4) Inductance values are measured at 10kHz/0.25V Less than +/-10% variation on -40°C/+150°C temperature range (5) Dielectric strength between windings and core is above 1kV/50Hz/2sec 167 HPC SERIES Planar Transformers High Power Planar Chokes for HV Applications 168 Dimensions